Failed to configure the addon in v29 button

Similar Questions

• SBS 2008 backup automatic Wizard fails cannot configure the backup schedule

  I need to install a new drive for backup for SBS 2008.

  The new drive is 3 T. The backup requires 567G.

  The Backup Wizard fails with the message "cannot configure the backup schedule.

  I looked on the MS Support and the only link is related to the target being too small. Although does not here apply.

  The log file indicates that the operation failed because "the critical volumes cannot be excluded", but I included C drive in its entirety. There is a system drive D, but it is not available in the backup configuration.

  Any suggestions?

  Thanks in advance

  Murray

  It is a forum for specific consumers.

  You will find support for SBS in this forum-online http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• Configure the Previous and Next buttons

  Is it possible to configure the buttons back and forward in the play by slide bar? I have seen that you can disable the PlayBar by blade, which would be another option, but I don't have a subscription service or ASA, so I do not have access to these features. I wish I could control what slides these buttons will make you.

  Hello

  It is not possible to configure the next/previous buttons on the PlayBar.

  However, you can disable the playback bar and put some action buttons PowerPoint which, once clicked will be the user to the desired slide.

  Thank you

  ALPI

  Adobe engineering team

• Failed to configure the data source for EPMA in 11.1.2.3

  I'm updating 11.1.2.1 to 11.1.2.3 via update on Windows 2008 R2 64 bit
  
  4 .NET installed.
  
  I get the below error.
  
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-07303] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.awb.config.AWBDBConfigurator] Oracle Data Provider for .NET entry does not exist in C:\Windows/Microsoft.NET/Framework64/v4.0.30319/CONFIG/machine.config, install it before configuring the repository of EPMA
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] error: []
  com.hyperion.cis.config.ProcessingException
  at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:145)
  at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:650)
  at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:296)
  at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
  at java.lang.Thread.run(Thread.java:662)

  In accordance with the exception.
  *

  Oracle Data Provider for .NET entry doesn't exist 
  

  *

  ODP for .net is required by EPMA dimension server, which you can find here-->

  http://www.Oracle.com/technetwork/database/Windows/downloads/utilsoft-087491.html

  Thank you
  hyperionEPM
  Please check the answers as useful or correct for others to find them easily

  Published by: hyperionEPM on May 14, 2013 20:17

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• Failed to configure the modem

  I recently installed windows 7 32 bit, to my PC. now that I want to set up the network connection, it only shows me "no connection error. I have been diagnosed, but it indicates Realtech PCIe FE Family controller drivers are missing, I opened the Device Manager and found that WAN Miniport PPPOE Protocol is also does not work. How to solve this problem. can I do it manually?
  I have a laptop, find some drivers online?

  Hi master,

  Thanks for posting your question in the Microsoft community forums.
   
   
  Site Web de Realtek shows downloads in separate sections. I believe that, in view of the series of model of your card, that this link will direct you to the appropriate download page:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

   
  We will try these steps and check:
   
  Step 1:
  Normally the PPPoE (point to Point Protocol over Ethernet) power off when authentication failed.
  Oensure that your ISP (internet service provider) user name and password are correct
  Oensure the connection is set to obtain an IP (internet protocol) address and an address of server DNS (Domain Name System) automatically under network and sharing Center, see the link below steps:
  Change TCP/IP settings
  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
  For more information, see the link below
  Create a PPPoE Internet connection
  http://Windows.Microsoft.com/en-us/Windows7/create-a-PPPoE-connection-to-the-Internet
   
   
  Step 2:
  You can try to uninstall and reinstall all devices (wired) network adapter and check if it helps:
  Uninstall the drivers from Device Manager.
  a. click on start.
  b. type devmgmt.msc in search, and then press enter.
  c. expand network card in Device Manager, right-click on the devices one by one and select Uninstall.
  d. uninstall all devices, and then restart the computer.
   
   
  It will be useful.
  Please report if you have any questions on this topic or any how windows issue in the future and we will be happy to help you.

• Commit failed when configuring the driver settings

  Hello

  When I try to set up the validation of "capture workspace webcenter console" driver I get the error like "Failed to Connect to imaging system. "Could not connect po"

  basically he asks UserID-weblogic, Imaging Web service URL - Pwd-xxxxx, political base of security http://localhost:XXXXX/Imaging/ws

  When I copy the URL and paste it into the browser, I get a 403 forbidden as output.

  Ref points:

  I checked the imagery in deployments and is active.

  My capture Webcenter is an area (under windows) and IPM is in another (linux)

  Hello Ryan,

  The error has been resolved, it was a stupid mistake, the machine (windows) capture did not file server IPM (OLE) host mapping. By the time I traced it showed me the message 'Connect'

  Thanks for your time again.

  Kind regards.

• Failed to configure the server to workstation

  Hello

  We recently had a power outage and our UPS has not be fresh enough for the failure of all. The 9 workstation I was using was installed on a Windows Server with a couple of the shared virtual computer. We are usinh WS9 for testing purposes and hope to upgrade to a version of server soon. After the crash I can't enable shared virtual computer. I tried to remove the datastores.xml, but that has not solved the problem. I also tried to see if I had more than one host entry in my hostfiles that was not the case. I don't know what else to do...

  

  My datastores.xml file:

  <ConfigRoot>
  
  
    <LocalDatastores>
  
  
      <_length>1</_length>
  
  
      <_type>hostd.host.LocalDatastoreEntry[]</_type>
  
  
      <e id="0">
  
  
        <_type>hostd.host.LocalDatastoreEntry</_type>
  
  
        <id>1</id>
  
  
        <name>standard</name>
  
  
        <path>E:\Shared Virtual Machines\</path>
  
  
      </e>
  
  
    </LocalDatastores>
  
  
    <NasVolumes>
  
  
      <_length>0</_length>
  
  
      <_type>hostd.host.NasDatastoreEntry[]</_type>
  
  
    </NasVolumes>
  
  
  </ConfigRoot>
  

  I reinstalled it and it works fine now. We had a power outage and our UPS didn't counter as much as was needed. I had to start from a snapshot as the VM disk has been corrupted.

• "failed because of the wrong configuration"

  I have a .air program on nearly 400 PCs in the field.  I have an upgrade I want to broadcast in silence.    I can get the new slots automatically .air file.  I would like to run a batch file that will install and click the button "Replace" when he discovers that an old version is already out there.

  Therefore, I have included the Adobe Air Application Installer.exe in the download, I created a batch file that does this:

  "Adobe AIR Application Installer.exe" - silent - eulaAccepted - desktopShortcut "C:\Program Files (x86)\MascoVSC\vscassets\program\VSC.air.

  It works perfectly when the old version isn't on the machine, but if this is the case, I get the error: "failed because of the wrong configuration.

  Any help would be greatly appreciated.

  Hi Jeff,

  Can you try the ARH tool and in the case of an update, do an uninstall first, then install?

  Binary:

  Mac: http://airdownload.adobe.com/air/distribution/latest/mac/arh

  Winner: http://airdownload.adobe.com/air/distribution/latest/win/arh.exe

  Linux: http://airdownload.adobe.com/air/distribution/latest/lin/arh

  Documentation:

  http://help.Adobe.com/en_US/air/Redist/WS485a42d56cd19641-70d979a8124ef20a34b-8000.html#ws fffb011ac560372f117f43a112b21f7d88d-8000

  Thank you
  Chris

• What config preferences would lead the button in the addon to the no fire no?

  The context search X Addon does not work in my default profile, Firefox ver 34. Some of these buttons does not fire, but all the other addons and the links are clickable. Yet the addon works in a new profile I created to diagnose the problem. Deactivation of all the addons in the default has not solved the problem. The problem is perhaps not an addon, but among the preferences of config, but I don't know which. Preferences in particular could be the cause of this behavior?

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe Shockwave for Director Netscape plug-in, version 12.1.1.151
  Adobe Shockwave for Director Netscape plug-in, version 12.0.7.148

  Gmelius 5.7.6.1 ([email protected])
  Gmelius 5.7.7.12 ([email protected])

  Having multiple versions of a program can cause problems.

• Cannot configure the buttons on the tablet on Portege M750

  Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.

  When I touch the botton nothing happens.

  Do you have XP or Vista installed?

  Have you installed Windows yourself using a version of Windows?

• The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  Install Firefox 4 beta that healed, but brought other problems.

  The Ask toolbar is initially in the version of Firefox 3.6.13. Obviously something in this extension is not compatible with a Firefox security patch. Disable this extension or uninstall it.

• Satellite A200-08J: how to configure the command buttons

  I read many posts but nothing seems to make sense.

  Why Toshiba would put these buttons here if they are so difficult to configure? or not able to be configured?

  FYI same Windows Media Player does not meet any of them.

  I use Vista Business 32...

  I would like to configure all the 6 buttons next to the button On / Off (internet, media, play/pause, stop, previous/next.

  Thank you...

  Hello

  To my knowledge, not all keys are configurable. The buttons like pause, play, stop, etc. cannot be configured with different functions.
  It is not possible.

  But you can use the key Toshiba control utility to configure the buttons such as Internet and CD/DVD.
  You can find this tool in Toshiba Assist-> optimize

  There you can assign new applications to these buttons.

  By the way; Satellite A200-08J seems to be a model Canadian that is why it would be desirable and recommended to use the drivers & tools from the Canadian driver page.

  See you soon

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them

• New configured vlan4 failed to get the IP address of our ad server

  Any guy who can help me: due to the expansion of network, I need allocate a new subnet 192.168.4.0 on our lan co. existing, 3 private LAN 192.168.1.0 (primary, all related Windows AD server and internet devices). 192.168.2.0 and 3.0 are Department LAN for user workstations. All desktop user on all the networks had the host Windows AD 192.168.1.20 IP. I used a new switch 6249 dell to configure a new VLAN 192.168.4.0, but user on this network failed to get IP of the host of the AD. Could someone give advice? Console > console en #show run! Current configuration:! Description of the system "PowerConnect 6248, 3.3.10.3, VxWorks 6.5! Version of the system 3.3.10.3 software! Passage mode is configured as disabled! Configure the vlan database vlan 4 vlan routing 4 1 output battery 1 2 Member out ip address 192.168.1.221 255.255.255.0 ip default-gateway 192.168.1.1 no ipv6 do enable the interface vlan 4 routing ip address 192.168.4.22 255.255.255.0 ip helper-address 192.168.1.20 ip 192.168.1.20 domain helper-address dhcp ip mtu 1500 output user name 'admin' password level 15 dhcp 0192023a7bbd73250516f069df18b500 encrypted l2relay dhcp l2relay vlan 4! interface ethernet 1/g13 switchport access vlan 4 output! interface ethernet 1/g14 switchport access vlan 4 output! interface ethernet 1/g15 switchport access vlan 4 output! interface ethernet 1/g16 switchport access vlan 4 output! interface switchport ethernet 1/g17 access vlan 4 output! interface ethernet 1/g18 switchport access vlan 4 output! interface ethernet 1/g19 switchport access vlan 4 output! interface ethernet 1/g20 switchport access vlan 4 output! interface ethernet 1/g21 switchport access vlan 4 output! interface ethernet 1/g22 switchport access vlan 4 output! interface ethernet 1/g23 switchport access vlan 4 output! interface ethernet 1/g24 switchport access vlan 4 Server snmp community public rw to exit

  Remove the routing of the 6248

  Delete the IP address that you assigned to 4 VLAN on the 6248

  On the S5624P create VLAN 4 and assign an IP address

  On the S5624P implementation of the programme of assistance to point to the address DHCP IP

  Make sure that the S5624P performs the routing VLAN.