Failed to create new virtual machines on a new install of Vmware Server2

Similar Questions

• How to create a virtual machine with apps to play in VMware player?

  I know that this question was probably asked several times before. I searched for the answer and just shot to the top of threads that have a few years. I know a few things have changed since then and I didn't know how that would influence the answers. I want to create a virtual machine with specific applications that will play on VMware player. What is the best way to do it and it is possible for the weak or no cost? If someone knows a tutorial or blog etc I can follow that would be great.  Thank you

  See the article by Alessandro on that... http://www.virtualization.info/2005/12/Guide-to-create-VMX-files-for-VMware.html

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• I need help to create a virtual machine - I am new to virtualization.

  Hello

  I am new to virtualization and I chose the merger.  I have a hard drive from a Dell died in a USB enclosure.  I have also the XP restore disks.  Can I create a virtual machine from this? Converter?

  Hello

  No, you can't legally. Your Windows XP has an OEM license that connects the OS for the DELL died. If you ask MS then the Windows operating system died with the DELL...

  Is this fair? Not IF you ask me. Can you work around it? Maybe... but its going to be a long and painful process.

  Restore XP disks have the same problem... basically... you can always try it, but I fear that you will not be able to activate the operating system because it is related to DELL hardware.

  You will need a version of windows not OEM to install on the merger (or any other virtualization product, this is a Microsoft limitation, not a virtualization)

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Failed: could not create H\Virtual Machine Setup\vm046

  I was conversion a VM to ESX 4.0 VMware workstation with VMware converter 4.0 format software but I am getting error following during the conversion process.

  "Failure cannot create the \Virtual Machine Setup\vm046 H.

  Please help...

  Please keep in mind that it is. I know that for sure.

  iSCSI Software customer

  http://www.starwindsoftware.com

• create the virtual machine from windows NT 4 server with adaptec raid 5

  I have an old Dell (1998) server running windows NT 4.0 sp6a.  He had a raid 5 configuration using the controller raid adaptec SCSI 2940.  2 discs failed who broke the raid set.  I had a disk recovery company to recover the data and they have scratched off readers and gave me a SATA with all volumes.  I found a procedure to create a virtual hard disk (.vhd) and then converted to a hard and used to create a virtual machine in VMware workstation 7.  When I turn on the virtual machine, it begins the process of starting windows, shows the boot menu, select normal or mode VGA, goes through the process of NTdetect, display processor and memory but then gives a BSOD with the message inaccessible_boot_device.

  I changed the hard to affect the buslogic ddb.adaptertype, but it gave me the same problem.

  is there a different driver that I need for an adaptec raid controller or if the typical SCSI drivers should work?  If the typical SCSI drivers should work, so my problem might be in my Boot.ini because it shows that he is supposed to start on the partition (4) and this sata drive may not have scores exactly as they were on the raid configuration.  I tried to mount the volumes not in read-only mode, but the partition that I need to change the boot.ini file is partition (2) what mapping VMware won't let me open mode not readonly.  whenever I have, select it and it opens the partition (1) mode not readonly.

  I know this sounds complicated then I hope I described with precision.

  Hello
  I live in Germany, but my internal clock seems to be adapted to the New York Times.
  Very useful, because most repairs or recovery to the VMware is done the evening or at night.

• Create the virtual machine with the ISO mounted CDROM

  Community of hell!

  Working on the vmcreate.pl script to add the creation of CD-ROM with iso data store, I got stuck on the error

  ' Invalid device configuration: ' VirtualSCSIControllerOption.numSCSICdroms '.

  I'm sure I'm missing something obvious, or this option but may not understand how to deliver this.

  I created a cdrom as follows (below test I create any CDROM, no iso file to reduce the number of layers):

  my $ BPPRR m_backing_info = VirtualCdromRemotePassthroughBackingInfo->new)

  deviceName = > ' '.

  exclusive = > 0,

  );

  my $description = description->new(label = > 'CDROM', summary = > 'cdddrom');

  my $connectable = VirtualDeviceConnectInfo->new(allowGuestControl = > 1,)

  connected = > 0,

  startConnected = > 1,

  ( State = > inmates ' / ' );

  my $ BPPRR m = VirtualCdrom->new(backup = > $BPPRRm_backing_info,

  connectable = > $connectable,

  controllerKey = > 0,

  deviceInfo = > $description,

  key => 1,

  ( unitNumber = > 1 );

  VirtualDeviceConfigSpec->new(device = > $BPPRRm,

  operation = > VirtualDeviceConfigSpecOperation->new()'add'));

  Did anyone have working example to create the virtual machine with CDRom?

  Andrey

  If someone will find this useful I followed this route Re: vmreconfig.pl add the device CD/DVD fails if the virtual machine created with vmcreate.pl

  and also I found good examples of what I need to in VMUtil.pm in cmd vmsphere libraries.

  Andrey

• can not clone or create a virtual machine for vsandatastore

  Hi all

  I try to clone a virtual machine to vsandatastore. But I get the follow error:

  -> policy requires 2 replicas with discs 1 each with 0 bytes free each. Only found 0 these records.

  -> failed to create the object:

  The hardware configuration is:

  I/o Controller: LSI SAS9271-8i

  HARD DRIVE: ST91000640SS

  SSD:Intel SSSDSC2BA400G3

  10GE: Intel 82599

  When I create a virtual machine or create a file vsandatestore on the web client. I also see the same error.

  Could someone give me some suggestions? I do not know how to solve this problem.

  
  

  Thank you!

  > Policy requires 2 replicas with discs 1 each with 0 bytes free each. Only found 0 these records

  This means that all three nodes in the cluster is not participating in the storage. Check if all 3 nodes have at least 1 diskgroup and contributing to the storage

  default vsan strategy is 1 failure to tolerate what creates two replicas. so that you can either ensure that all 3 nodes have at least 1 diskgroup or create a vm storage policy replacing the default values

  Thank you

• vCO workflow: create a virtual machine from a model and then ask the user about the CPU, memory size...

  Hi guys,.

  I am trying to create a workflow with vCO that can do the job for me:

  -Create a virtual machine (or maybe a several virtual machines) from a model (the model is in vCenter, of course)

  -L' user who is running the workflow has the thr right to say what he wants for the CPU, the memorysize, the disksize

  Any help?

  I found some workflows in the library can seem to do something similar to what I want, but since I'm a beginner I'd rather have your advice

  Hello there and welcome to vCenter Orchestrator

  Take a look at this series of tutorials to get an idea of how start:

  Create a vCO simple self-service VM Provisioning Portal - part 1

  Create a vCO simple self-service VM Provisioning Portal - part 2

  Create a Simple Self Service VM Provisioning Portal vCO - part 3

  The general approach to take would be to determine which of the clone (or clone and customize) workflows adapts to your nearest need (see your customer vCO: workflows\Library\vCenter\Virtual Machine management\Clone\)

  Then, create a NEW WORKFLOW that calls this one... after that your clone operation is complete, keep the computer turned off virtual and add feeds of extra work from the library to your new workflow that do things like change the amount of Ram, adds disks, change CPU, etc...

  Be sure to watch the videos on http://www.vmwarelearning.com/orchestrator to get a basic understanding of the use of vCO.

• Licenses to create a virtual machine is second with more than 8 cores?

  So, we have a machine with 4 physical Sockets with 16 cores on each. We bought 4 licenses of vmware's standard. Now, we saw early on that the number max of hearts that we assign to a virtual machine was 32, which isn't really a big problem, 32 is a lot for our needs. So we have a 32 core virtual machine running and some other smaller, but now when I try to create another virtual machine with more than 8 cores it tells me that I have insufficient licenses.

  Can anyone provide more information on that? If I can create a virtual machine with more than 8 cores, why I can't create a new one?

  He said authorized to 4 physical processors, so it's ok, it's using your Standard licenses.

  During the 60-day trial, you could create more large virtual machines, because the 60 days run with Enterprise Plus features. Now that you are using the standard license, you can create only 8 vCPU VMs.

  Solution:

  You should spend 5.5 ESXi. Your license will also work for 5.5 and you'll be able to create virtual machines with up to 64 vCPUs.

  Concerning

• Cannot create a Virtual Machine

  Hello

  I'm using VMware Workstation 10 and there seems to be a huge issue here. I can't create a Virtual Machine. After completing the Wizard "create a new virtual machine", it seems to be to do nothing. I even tried to open the .vmx file in the Documents folder itself. No matter what I do, don't open the virtual machine. I think that its not to be created in the first place.

  I am all the normal stages and have hardware virtualization enabled in BIOS. Oh, and I checked to see if Virtual Box is running, and it works well. The problem seems to be that in VMware Workstation. Can someone please help me on this? I posted pictures of the screenshot of what records looks like at the end of the wizard.

  

  

  I solved it. It turns out that I was using incompatible software - Windows7FirewallControl by Sphinx-Soft. He created trouble for VMWare even after allowing it through the firewall.

• Script to create multiple virtual machines model works is not for the network adapter variable

  We are working on a script to create multiple virtual machines from a template. The script works fine, but when we try to include commands to set the NIC to a group of specific ports on a dvswitch script errors on. Here's what we have so far. This script (less network variables) works, but we would like to include the network configs in the script as well.

  -------------------

  This is the part of the script that configures the network/dvswitch adapter... but does not work properly.

  $myResourcePool = get-ResourcePool-name DQOL

  $dsName = get-Datastore-name "DQOL-DS01.

  $myTemplate = get-Template-name "DQVTemplate".

  $distributedSwitchPortGroup = get-VirtualSwitch-distributed - name "CVE-dvS04-Nexus - k 5 | Get-VirtualPortGroup-name '979-DQ-SHARED '.

  New-VM-name MyVM1-model $myTemplate - Networkname ResourcePool - $myResourcePool - OSCustomizationSpec $mySpecification $distributedSwitchPortGroup - Datastore

  (Get-$dsName data store)

  New-VM-name MyVM2-model $myTemplate - ResourcePool $myResourcePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  _____________________

  !!!!!!!  This part works, but without specifying a network/dvswitch... card!

  $myResourcePool = get-ResourcePool-name DQOL

  $dsName = get-Datastore-name "CVE-SAN-ISG-DS02-02ef.

  $myTemplate = get-Template-name "DQVTemplate".

  New-VM-name MyVM3-model $myTemplate - ResourcePool $myResourcePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  New-VM-name MyVM4-model $myTemplate - ResourcePool $myResourcePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  Here is the error we get:

  New-VM: all parameters can be resolved by using the specified named parameters.

  C:\Users\capuanoj\Desktop\Create-multiplevms-fromtemplate.ps1:6 char: 7

  + New-VM < < < <-name MyVM1-model $myTemplate - Networkname $distributedSwitchPortGroup - ResourcePool

  ePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  + CategoryInfo: InvalidArgument: (:)) [new-VM], ParameterBindingException)

  + FullyQualifiedErrorId: AmbiguousParameterSet, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  You cannot use the - model and Networkname - parameters of the cmdlet New - VM in a single order, because both are in different parameter sets. You must first create the virtual machine and then use the cmdlet Set-NetworkAdapter to change the portgroup of the virtual machine. As in example 4, assistance from cmdlet Set-NIC:

  --------------  Example 4 --------------

  C:\PS>$myNetworkAdapters = Get - VM | Get-NetworkAdapter-name "NIC 1.
  $myVDPortGroup = get-VDPortgroup-name MyVDPortGroup
  Together-NetworkAdapter NetworkAdapter - $myNetworkAdapters - $myVDPortGroup Portgroup

  Retrieves all network named "NIC 1" cards of all virtual machines and connects to the specified distributed port group.

• How to create a virtual machine on a stand-alone host?

  Hello

  as you know others my son, I created a workflow to create several identical virtual machines on a cluster.

  Since we do not only have clustered hosts, but also some autonomous machines, I need to modify the workflow to be able to create virtual machines on these hosts.

  The main stage of the workflow is obviously one that creates virtual machines.

  It is derived from one of the supplied workflow within the Orchestrator library, but in the end, there is not much difference.

  The original workflow uses this method to create a virtual machine:

  task = vmFolder.createVM_Task( configSpec, vmResourcePool, vmHost );
  

  I've omitted vmHost in my workflow, because I did not want the user to select the host in the Cluster.

  So my execution of the method looks like this:

  task = vmFolder.createVM_Task( configSpec, vmCluster.resourcePool);
  

  Now, I tried to get this method to create a virtual computer on a stand-alone host, but everything I tried, he failed.

  Does anyone have a solution or a trick, what I might try to make this work?

  Thank you very much

  Andreas

  For the root folder, try this:

  var parent = vmHost.parent;
  While (!) () parent instanceof VcDatacenter)) {}
  parent = parent.parent;
  }
  var vmFolder = parent.vmFolder;

• Create the virtual machine with the type of controller SCSI LSI logic SAS with PowerCLi

  Hey guys,.

  IM the difficulty to create a virtual machine with the type of controller SCSI to "LSI Logic SAS". The cmdlet New - VM im struggling to find where to create the type of controller?

  If you create a virtual machine without specifying a disk it will create a 4 GB SCSI type thick (0:0) hard drive 1 with 0 Parrall default BusLogic SCSI controller.

  What im wanting to do is to create a disk hard which is thin Prov. and create SCSI LSI logic SAS controller is set to.

  New-VM -name VMSTORE23 -$vmhost $esxhost MemoryMB- 4096 NumCpu- 2 -NetworkName "Vlan 6 Machine Virtual Network" | Get-NetworkAdapter | Set-NetworkAdapter -Type Vmxnet3 -MacAddress '00:50:56:00:00:21' -confirm:$false

  I have recived of aid by some LucD who helped direct the value of the network card in the New - VM cmdlet as follows. But I'm not able to add a hose for hard disk also like:

  | Get-hard drive | Together-hard drive - Datastore $datastore - slim StorageFormat

  And I have no idea how change the type of SCSI conroller or create it with the correct configuration?

  Any help would be great,

  Thanks in advance

  Eddie

  Greetings, steddyeddie-

  You should be able to use Set - hard drive and SCSI controller Set cmdlets to set the storage format of your hard drive and the SCSI controller type, respectively.  You were close to on the part of game - hard drive .  Try something like:

  ## get the VM object $vmVMSTORE23 = Get-VM VMSTORE23 ## set the harddisk storageformat to thin$vmVMSTORE23 | Get-HardDisk | Set-HardDisk -StorageFormat Thin ## set the SCSI controller type$vmVMSTORE23 | Get-ScsiController | Set-ScsiController -Type VirtualLsiLogicSAS
  

  It could pack in to your existing order to keep it as a good word, but for readability.

  Enjoy

• Creating a virtual machine Image

  If I wanted to create a server image I could use whenever I needed to deploy a new virtual machine, which would be the best way to do it? I simply create an image and then clone it when I want to create a new virtual machine? Would I need to sysprep it after the clone?

  Thank you

  Hello.

  If I wanted to create a server image I could use whenever I needed to deploy a new virtual machine, which would be the best way to do it? I simply create an image and then clone it when I want to create a new virtual machine? Would I need to sysprep it after the clone?

  If you use vCenter, and then create a virtual machine image 'Golden', convert it into a template and then to deploy virtual machines of this model.  As long as you copied the right sysprep files for earlier versions of Windows 2008/Vista, you can customize (sysprep) virtual machines as part of the deployment.

  Good luck!