Failed to create the reset disk of password on CD-ROM or DVD + R

Similar Questions

• I have been sign out of windows xp man and do not have the reset disk (forgot password)

  I was disconnect from windows xp man and do not have the reset disk (I forgot the password) I try usign the Ctrl, Alt, delete twies and does not work then what I can do someone can help me. Thak you Gracias

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• Failed to create the recovery on my Satellite A300-29N using Sony DVD disc

  Hello

  Tried to do the recovery disk for Toshiba A300-29N using Sony DVD new, always make a mistake. Toshiba service center confirmed that Sony DVD is not compatible with this DVD player.
  The one facing this problem and any updates. Tried with DVD Imation, it worked fine
  Concerning
  Samir

  I do not use a Sony DVD but TDK or Verbatim DVD-R support. Whenever I used it I was able to create a recovery media. No problem at all.
  I recommend you do the same thing. Believe me, it will not work correctly.

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Satellite A300-15 has failed to create the recovery disk

  I'm trying to create the recovery for the first time disk (portable purchased before 5 days) and stop just before the end, the creator:

  Cannot read the file.
  F:\06343XSP5. STORMWATER MANAGEMENT
  (Error code: 020150-20-00000000)

  What's not?

  I posted this already in another thread, but I can repeat it;

  I noticed that not all DVDs are compatible and sometimes it of not possible to burn the recovery due to the problem of DVD DVDs.
  I put t know what DVD discs you use, but I had a good experience with TDK DVD-R.

  So my advice is simple; Try different DVD from different manufacturers

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite P300-1CN - failed to create the recovery disk

  Hi, I tried to create the disks of backup for my new P300-1CN recovery, but I get a power calibration error (error code: 0E01B5-26-00037304) when the progress gets 50% on the first disc of "current" bar and 25% along the bar of"progress".

  I have now tried 3 times and exactly the same thing happens every time.

  I have the cable power in and power on a full battery.

  Any ideas?

  G.

  Hello!

  Have you tried the disks from different manufacturers? I prefer to use DVD - R Verbatim and TDK discs.
  Check it!

  Also on the site of Toshiba, I can find a few updates firmware for the CD/DVD drive. Check if you have such a unit and update the firmware.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite R630-13D: failed to create the recovery disk

  I have a similar problem. I have a Satellite R630-13 t and tries to use the Toshiba recovery Media creator to create restoration 2 DVD discs.

  When you try to create the first disc, I get the following message:

  Cannot read the next file.
  E:\Boot\fonts\chs_boot.ttf
  (Error code: 020150-20-00000000).

  I get a similar message when you try to create the second. I tried four times. On my last attempt, I disabled the protection in real time on my virus checker (Windows Security Essentials) - I don't know how to close down completely, not sure you can. I also turned off wireless and bluetooth.

  I need to create these discs please. I use anti-scratch Philips DVD + RW 4.7 GB 120 Min 1-4 x speed discs.

  I know that someone else mentioned to try a different type of disc but I just bought these for this purpose and don't really want to buy more if I can help it. The disc type is certainly not a problem? When I look at the disc in the drive, they have files on them - even the file that the error message above says that he could not read.

  Thank you
  Ian

  I had similar experiences in the past and I can say that, after several tests using different types of media, I was able to create recovery discs using DVD-R only media.

  Hey two disks empty buddy aren't really expensive so don't waste your time here awaiting a solution and buy two or three empty DVD-R discs and create recovery media.
  Another tip: do not buy some cheap stuf but high quality TDK or Verbatim discs.

• Failed to create the recovery disk

  Hello.
  I'm trying to create a recovery CD but there was this error
  http://www.Tinypic.pl/rfjfibbhef1k
  help please

  Is there an option to create the USB stick recovery?
  If Yes, please test and send feedback.

• Envy of HP dv7 Notebook: failed to create the recovery disk.

  I have a HP ENVY Notebook dv7. When the computer was new, I tried to make a record of retrieving the value. When finished, I would check out (DVD - R) discs, I would get a message saying that disks has not written correctly. I tried three different packs records, always the same. Called HP Support and they went through the process with me, always the same failure. I was told not to worry if I still have the discs because of an accident, they would send them to me for free because they have a record. Now, I'll use this computer mostly on the internet and think I should have just in case records. Called HP and was not said no record, no free drives and it will cost a lot to make them help the discs. Is it possible to make records or put the info on a hard drive? I don't know if the computer thinks that I made a copy or not, because the copies, I thought I was doing were defective.

  @SAWANG ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are not familiar with works of the function of the Forum, private messages

  this 'http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/td-p/3547355' postHYPERLINK instructions of a..

  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/how-to-check-your-messages/TD-p/3547355

• Failed to create the recovery disk - error: differences between the following files

  Hello, I am using the recovery disc option, but during the creation of the third disc, I get this error repeatedly (I tried to create 4 + times now, using the same type of discs that worked well with the first 2 discs). The full error message is:

  "differences between the following files. "Source path: path:F\ZZImg\09753XSP2.swm E\HDDrecovery\SWImg\0975XSP2.swm target (error code: 02016F-3 c-00000000)"

  How to solve this? I want to reformat my laptop, and the thought that it would be better to create these discs first. It is recommended to have the front discs I try to reformat? This error would prevent me to use the option 'restore factory settings' which is present by pressing the 0 key during the loading screen?

  (I'm not very technically capable, so I am greatly worried something bad).

  Any help would be greatly appreciated.

  Thank you.

  Have you tried using different disks from different manufacturers?
  To do this. I had similar problem and it was not entirely compatible disc-related.
  I use TDK R CD or DVD. They work great!

• Failed to create the floppy disk to update the BIOS on the Satellite 1800-712

  I was given a Satellite 1800 712 with buggy BIOS (power went down while flashing) then now when the laptop is on a sign shows
  BIOS (Block2) is damaged! (Call the repairman)
  and so on...

  I downloaded the latest bios for the laptop, but when I try to follow the instructions given (unzip, insert a formatted 1.44 MB floppy, run the *.exe file and a 1.44 MB must be created) nothing happens. When I run the exe (chgbiosa.exe) if I am running windows xp nothing happens and if I'm running BACK said "initial mistake.

  In the Archives of the bios is a readme. It says that I need to copy files (BIOFC72T.COM and CHGBIOSA. (EXE) on a 1.44 MB diskette. Well, it is not helped either.

  Any ideas what should I do? Thanks in advance.

  Hello

  I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19801&MessageID=72625

  The case described in the thread above is very similar to your question.
  According to this message that every newer BIOS has a protection mechanism which means that even in the case of an incomplete process of flashing, the area responsible for in the BIOS flash for the upgrade is never deleted.

  Generally you should contact the service point in your country for this problem, but perhaps the description in the other thread will help you.
  But you know, everything you do is at you own risk

• New installation, error: failed to create the Scratch disk: disk error

  Location: Windows 7, had everything works fine. Added the SSD and installed system from scratch on the SSD. Old drive now is my second drive.

  Try to work on the second (old) drive drive to reduce wear to the SSD. But whenever I do, I get disk error message and it erases all my settings (so boring!)

  I think it's a permissions thing since I had to deal with this already to a certain extent, but I don't know how to solve this problem, because I do not know where adobe tries to save the file. Any tips or ideas?

  RESOLVED: I mess with permissions, but I think that what he did was following some advice I found elsewhere related to problems of registry Illustrator. I did the settings to change, then I found Photoshop in the start menu and right click > run as administrator. That seems to have done the trick.

• Satellite C650 - failed to create the recovery disk - error 020150-20-00000000 code

  I hope this is the right place to post this, but I think I have the same problem with my Satellite C650. He keeps wasting DVDs by stopping and saying that it cannot read the file E:\ZZlmg\11544XSP.swm and gives an error code 020150-20-00000000. The file is located on the DVD. I use Verbatim DVD - R The Recovery Media Creator is trying to write the first disc and is at the point of check data. Can you think of another explanation for this error other than the cheap DVD option? Thank you

  Hello

  There are two explanations;
  Either the CD/DVD drive firmware is not up to date and contains no information about the drives used discs (CD or DVD) is not fully compatible.
  As you know this is happening and is not uncommon.

  So first check if a firmware update is available for your CD/DVD drive.
  The European driver of Toshiba page is the right place to look for that.
  More details you will find in detail if the firmware has been published for your ODD.

  If there is no update firmware of your CD/DVD drive, then you should test other discs

• I forgot my password of connection for windows 7 for my toshiba laptop and did not create a reset disk. How can I recover the password or make a new one?

  I forgot my password login for windows7 and I have not created a password reset disk. How can I get a new password?

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

  Maintaining secure passwords - Microsoft strategy on getting around passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password

  If you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are on a working group (the majority of individuals are on a working group), you can reset your password by using a reset disk of password or by using an administrator account.

  Create a password reset disk:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-password-reset-disk

  Reset your Windows password:
  http://Windows.Microsoft.com/en-us/Windows7/reset-your-Windows-password

  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

  What to do if you forget your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Solutions to common problems with logging on Windows:

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Recently changed the password? Use the system restore and restore point from before it was modified:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Change your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-Windows-password