Failed to load data using the contour load utility
I am unable to load data using contour utility charge.Assigned data loading dimension such as: account
Driver-Dimension such as: period
Member as a pilot: Jan
Connection file:
Account, Jan, Point of view, the name of Cube data loading
Investment, 1234, "India, current, heck, FY13", Plan1
Utility of contour control
OutlineLoad A:pract U:admin /I:C:\test1.csv /D:Account /L:C:\lg.log /X:C:\ex.exc
Exception file
[Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1
[Thu Mar 28 18:05:39 GMT + 05:30 2013] com.hyperion.planning.InvalidMemberException: Member India, common, rough, FY14 does not exist or you do not have access to it.
[Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
Log file:
Connected application "Rlap", liberation 11.113, adapter Interface Version 5, supported and not enabled workforce, CapEx no taken care and not active, CSS Version 3
[Thu Mar 28 18:05:38 GMT + 05:30 2013] Input file located and opened successfully "C:\load.csv".
[Thu Mar 28 18:05:38 GMT + 05:30 2013] Record header fields: account, Jan, Point of view, the name of Cube data loading
[Thu Mar 28 18:05:38 GMT + 05:30 2013] Located by using 'Account' dimension and for the loading of data into the application 'Rlap.
[Thu Mar 28 18:05:40 GMT + 05:30 2013] Loading dimension 'Account' has been successfully opened.
[Thu Mar 28 18:05:40 GMT + 05:30 2013] A refresh of the cube operation will not be run.
[Thu Mar 28 18:05:40 GMT + 05:30 2013] Create filters for safe operation will not be performed.
[Thu Mar 28 18:05:40 GMT + 05:30 2013] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.
[Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
Infact members exist in outline.
Any help would be appreciated.
can you double check your csv file, open it in a text editor, because the error is showing additional citations.
[Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
Headers fail loading dimension with the contour fill utility.
When I try to load a dimension with the contour fill utility I get the following error message in charge of contour newspaper.
«Impossible to get analytical information and/or perform a data load: values of unrecognized column header, refer to previous posts.» (Note: column header values are case sensitive.) »
Is there another newspaper, that I can go to in order to see what the value of the header is the cause of the problem? The alternative is to remove a header at a time and try to make the charge, and since this dimension has more than one column, it would take a lot of time. As a result a sample of my data file.
Parent account, Alias: by default, operation, data storage, calculation re encoding, Type of account, balance time, value Skip, Data Type, Type of exchange rates, use 445, reports, Type of Plan (BUDGET), on the gaps Plan of aggregation (BUDGET), Type (BALSHT), aggregation (BALSHT), Source Plan Type
Account, IncomeStatement, update, dynamic Calc, 0,.
IncomeStatement, 300000, Net income, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
300000,310000, total income before taxes, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
300000,311000, income before tax from operations update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
310000,312000, another Exp (Inc), the update, the dynamic Calc, 0, expense, flow, currency, fees, 1, 0, +, BUDGET
300000,320000, provision for income, dynamic update tax Calc, 0, expense, flow, currency, fresh, 1,-, 0,-, BUDGET
320000,321000, costs of update, store, expense, flow, current taxes, currency, 1, 0, +, BUDGET
320000,322000, deferred Taxes, update, store, fresh, flow, currency, charges, 1, 0, +, BUDGET
300000,330000, minority interests, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT
300000,340000, income from investment in Subs, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT
300000,350000, back, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT
311000,400000, the gross margin, update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
400000,410000, net income, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
410000,411000, gross, updated, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
411000,411100, income from operations, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT
411000,411200, BALSHTenue synergy, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT
411000,411300, IC revenue, update, store, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
410000,412000, returns and allowances, update, dynamic Calc, 0, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
412000,412100, return on sales, update, store, BALSHTenue, flow, currency, Non-frais, 1, 1, +, BALSHT
412000,412200, discount sales, update, store, BALSHTenue, Flow, currency, Non-frais, 1, 1, +, BALSHT
400000,450000, cost of sales, updated, dynamic Calc, 0, expense, flow, currency, fresh, 1,-, 0,-, BUDGET
Try to run with running sec/n to validate and/m to generate headers. While doing this, you can also add a log location execption using /X. This will tell you what a question header.
Review the generated header and examine the wrong header in the exception log.
Concerning
Celvin
-
Issue while loading data using the file Rules Essbase
Hi all
I am facing problem while loading data using the Rules file. In the rules file, I rejected several members in two areas (two dimensions). Now if I load the data using the rules file I'm getting errors for all members in the dataload.err file. If I reject mutiple members of a single field, the data load without settling errors in the dataload.err file.
I want to know how rmany members of several fields of ejection for loading data using the file Rules Essbase? Is it possible?
Okay, okay... I think that you must assign Global Select / reject Boolean in the parameters of loading data as 'Or':
-
Receiving data using the device RFCOMM Protocol activate bluetooth
Hi all
I want to apply that receive the data of bluetooth device using the RFCOMM Protocol.
I'm pasting some of my code
Server StreamConnectionNotifier = null, Server1 = null, server2 = null;
Hi all
Can some body having any idea or sample code to receive data using the for Bluetooth RFCOMM Protocol. I am able to find a device to activate bluetooth and also connect with it.
And ther eis a problem plus I only magnified device does not form some sort of link (link Url SPP, OPP Url link, etc.) for bluetooth.
But I can verify that this device is correct because I am able to receive data from this device to my computer by checking the connection port and to open this port.
-
Use the host update utility or install ESXi4 Installable Update 2?
I have 3 ESXi 4.0 host and you want to upgrade to 4.0 Update 2 and never really used the host update utility, but I doubt if Host Update Utility allows some dirt or something.
I've read in a book but said nothing, while it records the settings of network, security and storage.
What could be better? Use the host update utility or install ESXi4 Installable Update 2?Kind regards!
If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.
Host update utility is the safest way to do it - and you will save the local VMFS more your configuration.
If you go directly to the host with the installation CD, your configuration will not be saved, just the VMFS (that with ESXi). In addition, is a way of failure to take in charge of the upgrade.
Dirty? With ESXi, I really doubt...
Marcelo Soares
VMWare Certified Professional 310/410
Master virtualization technology
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
-
Loading of the data using the ODI Crores
Hi Experts,
I'm loading data 16.5 crores from source to target with in the only Oracle DB (for source and target Ihave two different schemas) and the target tablespace have 180 GB, whereas I am running using the ODI interface, found the extension tablespace TEMPerror. but I did not have enough space to increase the TEMp tablespace in my PB.
Please help me any other solution to solve the same.
Thank you in advance,
Kind regards
Chaitanya.Hi Chaitanya,
Please add separate column (column sequence number) in the source table and retrieve the data with the sequence number and apply the index on the sequence column.
Add the filter to the sequence column condition in interface and run the interface in order to transmit the data between the source and target wise bouquetfor example: Add the command to the filter condition and transmit values like below
Command: sequnce_column_name between 1 and 100000
sequnce_column_name later between 100001 and 1000000 next sequnce_column_name between 1000001 and 10000000
Continue to run based on the calculation of your previous run time
It will be the word incase there no column of date as lupdated_date, created_date, created_by and updated_by
Kind regards
Phanikanth -
Load SQL data using the Regional service
Hello
I've been loading data using text file, now I want to try to load from SQL server directly, but screen load data from EAS, "Data Source" is grayed, as soon as I clicked on SQL as the Data Source.
What I miss here?, I configure ODBC to the server level.First of all, don't you configured the source SQL and ODBC in State of charge? Open the rule of the load and the "select" menu-> open SQL. Set up the sql statement in the form, then click ok/collect to test.
Once that the rule of the load seems good, so to actually load the data, show the daa load screen as you did. Select SQL. The data source must be a Virgin because it is for the flat file. Select the rule of load (it has the SQL in it). If you look to the right of the screen, and you may need to expand to see, rather than enter the sqlID and password there. Enter those, and click ok. It should load as usual.
If you want to leave MaxL, there is a syntax similar to tell the import statement is a sql load and give you it the id and the password
-
Unloading of data using the ORACLE_LOADER
CREATE TABLE S_ORG_BU_trg
EXTERNAL ORGANIZATION
(TYPE ORACLE_LOADER
Tempdir default DIRECTORY
ACCESS SETTINGS
(records delimited BY newline
fields
terminated BY ', '.
' optionally enclosed BY ' "'
lrtrim
missing field VALUES are NULL
)
LOCATION ("S_ORG_BU_trg0.dmp"))
AS SELECT * FROM S_ORG_BU;
SQL error: ORA-30657: operation not supported on external organized table
30657.0000 - "operation not supported on external-organized table".
* Cause: User attempted on the operation on an external table which is
not supported.
* Action: Don't do that!
Does type Oracle_Loader does not read the table and load the CSV
My requirement is to read the data and create a flat file. I want to use the portal if possible
Of http://docs.oracle.com/cd/E11882_01/server.112/e22490/et_concepts.htm#SUTIL1357
- The
ORACLE_LOADER
access driver is the default value. It loads data from external to internal tables tables. The data must come from text data files. (TheORACLE_LOADER
access driver cannot perform the unloading; in other words, he can't move data from an internal table to an external table.) - The
ORACLE_DATAPUMP
access driver can perform loading and unloading. The data must come from binary dump files. Loads of internal tables of external tables are made by extraction from files of binary dump. Unloading of internal tables to external tables are make by filling binary dump of the external table files. TheORACLE_DATAPUMP
access driver can write files to dump only as part of creating an external table with the SQLCREATE TABLE AS SELECT
statement. Once the dump file is created, it can be read many times, but it cannot be changed (i.e., no DML operation can be performed).
You will be able to unload and create an external table (using the ORACLE_DATAPUMP type), but the file will not be csv or readable in the same direction.
- The
-
Why the message time / date uses the original sent time?
Hello
I noticed that emails that are delayed come using the time sent initially, rather than when they reach my server. It is unusual, because it may end with a 'new' message finish well down the list of the other messages sent more recently.
What's the intended operation?Note the following header: This shows up in my Inbox based on time 02:57 was created, even if he won't even let the original that much server later.
The - Wed Mar 25 21:59:03 2014
X key account: Account2
X-UIDL: UID86003-1263191493
X-Mozilla-Status: 0001
X-Mozilla-Status2: 00000000
X-Mozilla-keys:
Return-path: < [email protected] >
Envelope-to: [email address removed]
Delivery date: Tuesday, March 25, 2014 15:11:16-0700
Received: og1.ijnet.net ([216.246.89.40]: 47913)
by napkin.mysitehosted.com with esmtp (Exim 4.82)
(envelope - from < [email protected] >)
ID 1WSZYx - 00074-n. b.
[removed email address]; Tuesday, March 25, 2014 15:11:15-0700
X-envelope-From: [email protected]
X-envelope-To: [email address removed]
Received: From hopkins.tea.state.tx.us (198.214.98.149) by og1.ijnet.net (MAILFOUNDRY) id VQwf2rRqEeOelwAw [removed email address]; Tuesday, March 25, 2014 22:10:59-0000 (GMT)
Received: from ([198.214.97.182])
by hopkins.tea.state.tx.us with ESMTP id 5503449.345156795;
Tuesday, March 25, 2014 16:48:03-0500
Received: Miller (miller.tea.state.tx.us [198.214.97.182])
by miller.tea.state.tx.us (AIX5.2/8.11.6p2/8.11.0) with ESMTP id s2PLgCe45034;
Tuesday, March 25, 2014 16:42:12-0500
Received: by LIST. TETN.NET (LISTSERV-TCP/IP 14.5 release) with the id of coil 204073for [email address removed]; Tue, 25 Mar 2014 16:32:55 -0500
Approved-By: [removed email address]
Received: from hopkins.tea.state.tx.us (hopkins.tea.state.tx.us[198.214.98.149]) by miller.tea.state.tx.us (AIX5.2/8.11.6p2/8.11.0) with ESMTP id s2PJvne69120 for <[email address removed]>; Tue, 25 Mar 2014 14:57:49 -0500
Received: from ([198.214.97.51]) by hopkins.tea.state.tx.us with ESMTP id
5503449.345151870; Tue, 25 Mar 2014 14:57:47 -0500
Of workaround applies only to an IMAP account, where only the headers are downloaded. Quite rare really that is not the default.
The date of receipt is available in the pane always, just right clicking on the headers and select it from the list is all that is needed. Sort by the order received however denies all dates and maintains strict order of the received mail. However, all these things are on the view > menu sort order, including consolidation of beloved today yesterday last week so the sort of Outlook users.
Curiously, I find everything on Outlook without exchange awkward and somewhat limited, but it's an exchange client really not a customer of general e-mail in my opinion.
-
How many cell data uses the health app?
We have little data plans, and my wife intends to use the health app every day. Should I use to run the cell data health application? Another reference... If I used the maps on the watch application would use this as much data as it normally does on my iPhone? Just try to get an idea of the amount of data from the watch uses. Thank you.
I have not observed the health app using cellular data at all.
Regarding the cards on the watch, it's just an extension of maps on your phone. Cards cannot run independently on the watch. If you use maps on the watch, he uses exactly this use from your phone from your phone is running the show.
-
delete the data using the slider to tape
Hello
I have some log files that I need to deal with. For some of these files, I'll have to remove the beginning and the end of them. For this I intend to draw the newspaper and set of 2 sliders, and then the user move the sliders in a way that he would leave the unwanted data out of the band and then it would be a button to continue to delete the unwanted data of all channels within the group.
So far I traced the data and set the band using the following script:
view. ActiveSheet.Cursor.Type = "band".
view. ActiveSheet.Cursor.Mode = "graphPoints".
view. ActiveSheet.Cursor.X1 = CMin ("Y_Accel") + 0.25 * (CMax("Y_Accel")-CMin("Y_Accel"))
view. ActiveSheet.Cursor.X2 = CMin ("Y_Accel") + 0.75 * (CMax("Y_Accel")-CMin("Y_Accel"))
Now, I would use the positions where the sliders have been moved by the user to remove data but I don't know how to read the position of the cursor. With it, I would use a function like DataBlDel or similar.
Does anyone have an idea how to do that?
I'm just starting with DIAdem so if anyone found out that there is an easier way to do it please let me know.
Thank you
Leo
Hi Leo,
If you're just starting with DIAdem and scripts then the following article is a great resource. It examines interactions between users and the cursor data.
DIAdem - using scripts to run the dialog box file, intervention by the user, using the data of frame slider and good even more!
https://decibel.NI.com/content/docs/doc-5771
Good reading and let me know if you have any questions.
Best regards
Chris
-
standalone application for the acquisition of data using the NI DAQ card
I did a stand-alone application in labview GUI for data acquisition and processing of the signal. If I have to run this application in any other computer which should be all installed software other than the labview runtime engine... CD DEVICE DRIVERS OR alone must be installed or do I have to install any other software of data acquisition using the data acquisition card OR?
Thanks and greetings
You need only the racing of the engine, the device for the device drivers, maybe need pilots VISA if you make serial or something of this nature, you may need the channels or tasks created in the measures OR and automation if you created the it.
There may be other things you'll need depending on what you include in your code and what tool kits that you have installed.
-
Acquisition of data using the single cycle timed loop in labview fpga (7833R target)
Hi all
I want to acquire data of input analog of a generator using the loop of the timed cycle and DMA FIFO funtion. I want to use the acquired data to act as a process for my PID control variable. Can the attached code perform the goal? I'm skeptical about its features. Advice or suggestions please.
Kind regards
Opuk
The SCTL does nothing for you here. Just remove it and write directly from your analog read the DMA write.
And on the side of the host, you must move the Run method for before the loop.
You should also consider to the PID in the FPGA. PIDs work best in a deterministic environment, and you get more deterministic than on an FPGA.
-
Acquisition of data using the DAQ card
Hello everyone
I need assistance with the acquisition of data of the generator of signals through DAQ cards. I plugged the signal to the SCB-68 generator where the analog inputs of the generator are connected to AI CH5 and AIGRND of the Terminal Board. Then the output of the block is connected to the DAQ card. The maximum sampling frequency of the card is of 250 kech. / s. The problem is for reason that I am not able to see the waveform on the labview. I looked at other examples to find the problem, I am, but I am not able to understand this. I want to be able to choose the sampling frequency. I attatched my code as an attatchment for you all to help me know what the problem is. Any suggestions will be appreciated.
There is no task! You have not specified any hardware (i.e. your data acquisition card) anywhere.
Here's a suggestion. MAX aperture. Find your DAQ hardware. Open a Test Panel. Implement a continuous sample of N Points to some sampling rate. Press Run and convince yourself that you get the data.
Now, while remaining in MAX, to create a task, using the same settings. Call for example something sensible ("MyFirstDAQTask" is not a good reputation).
Now, go back to your code. Eliminate the first two functions DAQmx. Wire a constant task to the DAQmx Start feature. See the little triangle down? Click it, and it should show you the tasks he 'sees', the only one should be the task that you created in MAX.
Note that 'Samples Visible' is now 'hard coded' in the task. To get its value back out, you need to put a property node Timing DAQmx after the task start and pull on the quantity of the sample, samples per channel (which, for reasons that escape me, is a Dbl, you need to convert to an I32 before importing it into the while loop).
Bob Schor
P.S. Thank you to join your code.
-
Reading large data using the database connectivity
Hello
I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:
. VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller
What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.
Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.
Maybe you are looking for
-
I am owner and HP Pavilion laptop but the gestures of touchpad no longer works. Since I've upgraded to 8.1 Windows it has stopped working.Someone, please help!Model No.: 14-noo31aProduct #: E7H81LA #ABM
-
How much space on the drive of podcasts use. ?
My computer is getting really slow, and I download a lot to teach the poscasts. These slow down the computer? Thank you.
-
Error code 80072EFE during the update of Windows
ERROR 80072EFE CODE WHEN ATTEMPTING TO UPDATE IN WINDOWS UPDATE HAS MADE SEVERAL ATTEMPTS. McAFEE, installed after the victory of security his. uninstalled. several issues w / programs "not responding" constantly and functioning very slow pc. Compaq
-
Hi all Anyone know what is the maximum number of points of access supported by Cisco 2504 WLC? According to the data sheet's 75: http://www.Cisco.com/en/us/prod/collateral/wireless/ps6302/ps8322/ps11630/data_sheet_c78-645111.html But according to the
-
Shared Services Assign Access Control for Essbase
Hi we have an opportunity which has its commissioning as filters in the essbase group. I tried assigning its filter to thim thanks to assign a control access to shared services. I am able to see the user as well as the filter that I created for the u