Load SQL data using the Regional service

Similar Questions

• Need help with loading BSO cube with several data export files using the Regional service

  Hello
  
  We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.
  
  How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.
  
  I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?
  
  Please suggest.

  As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

• export all data (11 files pag) using the Regional service console

  Hello!

  We have an export of all data to a database with 11 pag files (2 GB each). We used the feature console of regional service for this purpose.

  I just wonder do we also get the same amount as txt files or is generally smaller export? It seems to take a while to get the made export.

  We have exported some time before Level0 coming out for a database with more than 30 cases of pag and it produces a txt file which was less than 1 GB in size. Also used time was very short.

  In this case we did not know that it would be fair enough to export data of Level0 then import it back and recalculate.

  Oh, I forgot, the version is 9.3.3

  Kind regards

  user637777

  No problem!

  You should be able to kill him by EAS, Yes.

  If it will not stop, or gets "closing...". "status indefinitely, killing the ESSSVR (not ESSBASE!) process is an option - but not really recommended.  Exactly how to do it depends on your OS.

• Loading SQL tables using the rules file

  Hi Experts,

  I have a doubt. In our project, we have a maxl command that imports the essbase data cube using tables sql below.

  import data from database VodaPln.wrkforce

  log in as 'devhyp' identified by 'password' using the rules_file «WFDataLoad.rul» Server

  My doubt is here in this maxl, we define the schema and password name ('devhyp' identified by 'password'( ), but we do not give the name of the table. So, how will the maxl understand what table to extract the data. Please let me know in case I'm missing something and need to check out somewhere else.

  Thanks and greetings

  The actual SQL statement is in the State of charge, IT will set the columns, tables where the conditions and joins. The first parameter is the name of user who may or may not be the schema name. This information is containd in the State of charge, but also an ODBC or CLI connection

• Cannot connect to Essbase Administration Services using the regional service console.

  Hi all!
  
  We work with the Oracle EPM 11.1.2.1 version and a few days ago our hard drive where are installed the oracle tools became full, breaking all my applications. Since then, we were not able to to connect/start of any application, including the WebLogic Server. In the oracle database, I found a papper «logic of starting web» about me They said that the security file is damaged and I followed the steps to recreate the security file (cwallet.sso) and then all the started application works well except the easconsole. When I try to connect it shows the message "failed to connect".
  
  I would like to say that until the drive became fully all my application worked well. It comes to my development environment. My EAS Server works well because I am able to connect using the easconsole of my production environment.
  
  Any idea?
  Thanks since now!
  
  Rafael Melo

  Have you tried to restart EssbaseAdminServices through the weblogic console?

• How to use the web service to update the data?

  Hi team,

  Need help in establishing a procedure for updating data using the web service, in the first instance, I think that it's the same reading webservice but I will produce an error:

  29273 00000 - "the HTTP request failed.

  * Cause: The UTL_HTTP package cannot run the HTTP request.

  * Action: Use get_detailed_sqlerrm to check the detailed error message.

  Correct the error and restart the HTTP request.

  using this tag soap_request.

  < ns1:Request >

  < ns1:header >

  < ns1:InterfaceName > OSMMVNECreateOrder < / ns1:InterfaceName >

  < ns1:InterfaceId > OSM - XXX < / ns1:InterfaceId >

  < ns1:CorrelationId > TEST-06262015 < / ns1:CorrelationId >

  < / ns1:header >

  < ns1:Mvno > MTI < / ns1:Mvno >

  < ns1:orderId > < / ns1:orderId >

  < ns1:orderType > CHANGE_STATUS < / ns1:orderType >

  < ns1:orderDetails >

  < ns1:subscriberId > 9469273 < / ns1:subscriberId >

  < ns1:newStatusId > 2 < / ns1:newStatusId >

  < / ns1:orderDetails >

  < / ns1:Request >

  the < ns1:subscriberId > 9469273 < / ns1:subscriberId > the Subscriber must search and

  < ns1:newStatusId > 2 < / ns1:newStatusId > will replace the current state.

  
  

  
  

  any suggestion on how to do it?

  
  

  
  

  Best regards

  Nelz Ki
  

  There is no difference between calling a web service to write data, against the appellant for reading data. SOAP is SOAP. He cares not.

  Example to interact with a web service is in Re: PLSQL webservice call

  Regarding your error - stack display Tower full of error to see what said the trace of the error. The data you've posted unfortunately no sense to isolate the error.

• Export data to a drive that is mapped to the Regional service console server

  Hi all
  I have a question regarding the export of data from the Regional service console:

  can export us the data to the drive mapped in the Regional service console?

  Is it possible and how can it happen?

  We sent our local drives to the server and tried to export data from the console of Regional service to that mapped drive. The process has failed. Could you provide information why it go failed with the mapped drive.

  Waiting for your update.
  
  Thanks in advance

  Make sure that the user must have write access to the shared files (mapped drive)...

• Issue while loading data using the file Rules Essbase

  Hi all

  I am facing problem while loading data using the Rules file. In the rules file, I rejected several members in two areas (two dimensions). Now if I load the data using the rules file I'm getting errors for all members in the dataload.err file. If I reject mutiple members of a single field, the data load without settling errors in the dataload.err file.

  I want to know how rmany members of several fields of ejection for loading data using the file Rules Essbase? Is it possible?

  Okay, okay... I think that you must assign Global Select / reject Boolean in the parameters of loading data as 'Or':

  

• Failed to load data using the contour load utility

  I am unable to load data using contour utility charge.
  Assigned data loading dimension such as: account
  Driver-Dimension such as: period
  Member as a pilot: Jan
  
  Connection file:
  
  Account, Jan, Point of view, the name of Cube data loading
  Investment, 1234, "India, current, heck, FY13", Plan1
  
  
  Utility of contour control
  OutlineLoad A:pract U:admin /I:C:\test1.csv /D:Account /L:C:\lg.log /X:C:\ex.exc
  
  
  Exception file
  
  [Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1
  [Thu Mar 28 18:05:39 GMT + 05:30 2013] com.hyperion.planning.InvalidMemberException: Member India, common, rough, FY14 does not exist or you do not have access to it.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
  
  
  Log file:
  
  
  Connected application "Rlap", liberation 11.113, adapter Interface Version 5, supported and not enabled workforce, CapEx no taken care and not active, CSS Version 3
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Input file located and opened successfully "C:\load.csv".
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Record header fields: account, Jan, Point of view, the name of Cube data loading
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Located by using 'Account' dimension and for the loading of data into the application 'Rlap.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Loading dimension 'Account' has been successfully opened.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] A refresh of the cube operation will not be run.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Create filters for safe operation will not be performed.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
  
  
  
  Infact members exist in outline.
  Any help would be appreciated.

  can you double check your csv file, open it in a text editor, because the error is showing additional citations.

  [Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Web service data control - how to use the data for the axis2 service manager

  Hello
  
  I have the following questions:
  I consume a Web service using the web service based on axis2, MTOM data. The webservice response returns a complex response object.
  
  1. How can I link the (type axis2 DataHandler object) the response content to be stored in a column of data?
  2. in the response object, the name of the file is stored in a hash table structure, how can I retrieve the value of a specific key only? In an ideal world, it's a no-brainer, in ADF(newbie here) I do not know how to extract it?
  3. in addition, the display of collectibles for a response from webservice with a radio button beside each line?
  
  Any help is greatly appreciated.
  
  Thank you
  J
  
  Published by: 843190 on March 22, 2011 18:16
  
  Published by: 843190 on March 22, 2011 18:20

  Is the part of the information that you want to display available as a separate attribute in the results of the Web service in the data control panel?
  If not, and you do a manipulation of the result to retrieve content, you can consider creating a Java proxy for the Web service, in that proxy to expose a method that gives you the news you need and then expose the proxy as a data control. Then, you can call the specific method to get the specific information in the format you need.

• Failed to load SQL Server 2005 Express Edition Service Pack 3 (KB955706)

  Failed to load SQL Server 2005 Express Edition Service Pack 3 (KB955706)

  Maybe you'll find an answer here (or post a new thread with all the relevant information).

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 2005-2011 - Update Services

• Trade rules do not appear in the Regional service console

  Guru HI

  We use the Application confort Hyperion Planning 11.1.2.2.

  We have created business rules for our planning application using Calc Manager and they work very well.

  But my doubt is that calculations do appear in the essbase.

  WT could be the reason for this... Please suggest.

  Thank you.

  Hello

  The Regional service console will show you only the calculation scripts, not the rules for calculation of the Manager. This is a technical limitation.

  Prior to version 11.1.2.3, we also had business rules. These were available in the Regional service console. Then, you had a section in the view of the company next to Administration, servers Essbase called Business Rules. I usually call them Hyperion Business rules (HBR) because users easily get confused with all the scripts and rules.

  In planning, you can see the calculation scripts and rules for calculation of the Manager.

  I hope that clarifies the situation and will help you.

  Kind regards

  Philip Hulsebosch

• Cannot open/Add essbase server in the Regional service console in SSL mode

  Hello gurus,
  
  I've set up SSL in EMP which ends at the web server level, but it seems that there is a problem with the Essbase server. When I try to add essbase server in the Regional service console in a secure mode it indicates what follows in the Regional service console Message Board
  
  Error: 1040142: NZERROR: nzos_Handshake failed (29024)
  
  Records verified Essbase, but it has the same error mentioned in it. I don't know where to go from here.
  
  Any help will be appreciated. Thank you.

  I think I might have the answer, EAS will use the RTC essbase, which has its own portfolio in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin\wallet

  Now you can update the cwallet.sso in that directory or add a file essbase.cfg in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin
  wiith the location of the portfolio by using the config parameter

  WalletPath

  I also added the certificate for the cacerts in \jdk160_21\jre\lib\security file

  Restart the services and give it a go, works for me.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Loading multiple files using the same interface in ODI

  Hi all
  
  We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
  We use the following KMS:
  
  (1) LKM SQL file
  (2) IKM Oracle SQL COMMAND append.
  
  Receive a quick response.
  
  Thank you
  RP

  Hello

  See this http://odiexperts.com/interface-parallel-execution-a-new-solution

  Thank you
  Fati

• Unable to see my apps in the Regional service console

  Hello! :)
  
  I'm stuck with not being able to see one of my applications in the Regional service Console. I created an EPMA and a classic application and I created Essbase cubes for each of them. I have also successfully connected to my server Essbase in the Regional service Console. However when I click on the sign near the Applications node under my Essbase Server located under the node Servers Essbase in the Vision of the Regional service Console, + who + sign simply disappears and no applications appear. I would be very grateful for any advice on what is wrong in my situation! Thanks in advance!

  First connect them all with admin in EAS, then expand the essbase server, right-click security right and update the security of shared services to all users.
  Remove the essbase server in EA
  Add a new essbase server, make sure that it is checked to use external authentication and enter your account details.

  See you soon

  John
  http://John-Goodwin.blogspot.com/