Error code 80072EFE during the update of Windows

Similar Questions

• I get an error code 643 during the installation of Windows updates.

  Security updates will not download.  Tried all the "fix - its" from the microsoft support site.  Downloaded microsoft security definitions.  A virus scan.  Nothing works. Are still unable to update.   Error code is Ox643, tried all the "fixes" for the error codes. Help?

  Original title: updates will not download which gives the error code Ox643.  Tried all the fixes nothing works

  The good news is that these are NOT updated for Windows. They are simply updated for .NET Framework 1.1.

  If you can not solve this problem, I suggest you uninstall this framework (and all the updates, which can be uninstalled everything first) using Add / Remove programs in Control Panel.
  If you need this particular setting down the road (and you very well might never need!), you can always install it then.
  In the future, only install the critical security updates for WINDOWS. Avoid the optional software and hardware updates, since it is more trouble than they are worth. :-)

• Error code 8007371B, during the installation of Windows updates.

  Original title: 8007371B error code

  Help! I get the error code when you try to update my laptop with the Windows updates. Can someone help me get this resolved?

  Thank you.

  Hello

  Remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
   
  Method 1:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Also Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
   
  For reference:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Hope this information helps.

• error code 525 during the installation of windows update for windows live

  Hello

  I use windows vista Home premium in my laptop. usually there was updates windows update and I could see it in my taskbar then I always allow windows updates. I did the same couple of days before. the update was the Windows live. but the problem that is not installed. It is downloaded but cannot install. and it shows the error code 525. even I had some problems with my windows live. as it is impossible to connect the video call easily. After trying several times, it would be connected. What the problem is. can it be resolved? now all the time closing button shows me the exclamation point. If I try to let it install again, it will show the same error code.
  Please help me to get rid of it.

  Hello

  you are posting in the wrong forum

  Live Help for windows

  http://windowslivehelp.com/

  and for windows update

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Error Code C800044E when the update of Windows Vista

  Please can someone help me with a problem I tried to download updates for windows.
  Whenever I'm looking for download the error code c800044e is displayed.

  I don't know much about laptops but can follow directions.
  I've been on microsofts website and fact as they advised IE SafeMode etc but nothing works.

  Please can someone help me... Ive had the phone for two years and I want to give my young children to use for school work etc but it keeps crashing.
  I did several scans for these two viruses & spyware etc but they come up clear.

  I hope someone can help me and talk me through how to fix this problem with steps clear lol...

  Thank you very much

  Hello

  I googled a bit more for this Microsoft error message and information refers to this MS knowledge base article:

  http://support.Microsoft.com/default.aspx/KB/971058

  Try the solution given by Microsoft, run the fix it Wizard

  Maybe it helps.

• error code 80040006 during the installation of windows live essentials on windows 7.

  I have a new computer and I'm trying to get everything to work right. We manage the reception of windows 7 pro 64-bit. I am trying to download the updates, and they are all worked well until I got to the windows live essentials. they all fail repeatedly. Get the codes as 8004006. Why does he refuse to install?

  Well, it was worth it. Now let's see...

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: «0 x 80242006»
  http://support.Microsoft.com/kb/956707

  Tip: Use the Vista-specific resolution.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Bluescreen error Code: 0Xc000007b during the installation of windows

  I am trying to install windows 8 in my new laptop Alienware. Everything seems to work fine until the installation check devices! He said that the process ran into an error of driver stack buffer overrun. The blue screen comes up saying

  "The operating system could not be loaded because the critical system driver is missing or contains errors.

  File:\WINDWS\system32\DRIVERS\stcfltn.sys

  Error code: 0Xc000007b

  You will need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your administrator system or PC manufactrer. »

  I don't know how to solve this problem. I have tried this 3 times, ran into the same error of all time.

  Any help to resolve the issue would be greatly appreciated.

  Thanks in advance

  

  Thanks a lot for all the help people.

  I finally solved the problem after hours of reading the forums online.
  I just had to install the drivers using the option "Run as Administrator" and that did the trick.
  Thank you again\
  Adel

• Error code 80072efe on automatic update of Windows

  Running Windows Vista Home Service Pack 2 installed. Firewall works, as it is Anti virus; There is no conflicting programs.  Internet explore is to function, but he doesn't let me update! >:( I tried all the advice that I met and I always find myself in the windows area 7.  Can't afford to move to 7. (too bad because Vista's pants.)

  It's so now I try the automatic update, I get the error 80072EFE code and I tried everything.

  Please help my laptop is too pretty to die!

  The straw

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

  A (another) Norton or McAfee application ever been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  You may encounter temporary connection [e.g. 0x80072EFE] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer (32-bit) only; [Run the difficulty in the default and aggressive modes, and then restart your computer.
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error CODE 0XC004E003 during the attempt of WINDOWS ACTIVATION

  A PROBLEM OCCURRED WHEN WINDOWS TRIED to ACTIVATE. ERROR 0XC004E003

  what I would do. need your help.

  Thank you

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Receive the error code 0x800700b7 during the Vista system restore

  Get the error code 0x800700b7 during the restoration of the system.
  "System restore failed due to an unspecified error. Cannot create a file when that file already exists. (0x800700b7).

  I have a Dell laptop, Studio, running on Vista.  I just installed some Windows updates (ALWAYS a hassle!) and restarted the system.  Failed to start,

  I tried:
  (7 times) Startup Repair
  System Restore (at least 7 times - try them different restore points to restore the system, going back to mid-May
  Trying to reboot without doing anything

  The error message persists.   I can't boot the system in safe mode, so I'm not able to disable the antivirus software or go to start or anything else.  Windows does not start. Y at - it a fix for this error message?
  Help!

  I managed to fix it on my own over the weekend. In Safe Mode, disabled Norton and also downloaded a tool that Norton offers to help solve the problems of this kind.  The tool worked and my laptop works fine now. The update of Java was the problem - I don't allow anything not my automatic update system, but Java auto-updated anti-virus Norton was on.

• I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  There are 2 updates will not install... Ive had this problem for the last 6 months

  See if this Microsoft Support will help you:

  http://support.Microsoft.com/kb/976982

  Note: there are 2 methods. If the August challenge it for me does not help, try a 2nd.

  Another article to number 643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  .........................................................................................

  Take a look at this answer of MS Answers forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• I get an error code 205 during the installation

  I get the error code 205 during the installation?

  N ° 1)

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Then click on the link below and download the installer directly mentioned in step 2.

  He's going to start directly from the installation process.
  

  Step 2)

  For Windows : http://trials2.adobe.com/AdobeProducts/KCCC/1/win32/ACCCx3_1_0_108.zip

  For Mac : http://trials2.adobe.com/AdobeProducts/KCCC/1/osx10/ACCCx3_1_0_108.dmg

  If you get an error message like "Download seems to be corruptd (-60)" during the installation of the CC apps in the applications menu,

  For now download by in below link:

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Reference:

  Error download or update Adobe Creative Cloud applications

• accidentally turned off during the update of windows

  Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

  someone could help me on this guys, how can I do recover without reformatting my laptop.

  Please help me guys...

  Thanks in advance...

  Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

  If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can getting error Code U44M1P7 during the upgrade, I fix?

  How can getting error Code U44M1P7 during the upgrade, I fix?

  Update product that you are trying to install?

  Is it compared to the creative or perpetual clouds?

  Please check following if you have creative clouds.

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

• error code 1606 during the uninstallation of autocad and sewer storm

  error code 1606 during the uninstallation of autocad and sewer storm

  Hello

  I suggest you disable any autodesk / autocad related items from msconfig and see if that gets rid of the message.

  Click Start, type msconfig.

  To after the results, click on msconfig and click on the Services tab.

  I hope that helps!