Failed to set the selected index of a ToggleButtonBar to "0".

Similar Questions

• ComboBox - trying to set the selected item

  I call a remote object that calls the following function to the suite. The returned object is used to fill a form of TextInputs and a ComboBox control - this is a form of change. How can I set the selected item in the ComboBox? I could not get the selectedItem to work, and I do not know the value of the index that corresponds to selectedCompany.CompanyType in order to use selectedIndex.
  
  private void receiveSelectedCompany(event:ResultEvent):void {}
  selectedCompany = event.result as business;
  
  copy the record in the areas of publishing
  txtCompanyId.text = selectedCompany.CompanyID.toString ();
  cboCompanyTypeEdit.selectedItem.CompanyType = selectedCompany.CompanyType;
  txtCompanyName.text = selectedCompany.CompanyName;
  txtCompanyShortName.text = selectedCompany.CompanyShortName;
  txtTaxId.text = selectedCompany.TaxID;
  }
  
  Thanks in advance,
  France
  

  FranceC, here is a function allows you to do.

  simply call the selectComboValue function and pass it the name of the combobox and the search string as follows:

  selectComboValue (Mazonedelistederoulante, dataObj.fieldName.toUpperCase ());

  Here's the function:

  public void selectComboValue(select:_mx.controls.ComboBox,_optionToSelect:String):void {}
  for (var i: int = 0; i< select.dataprovider.length="" ;="" i++)="">
  If (select.dataProvider.getItemAt ( ) .label == optionToSelect) {}
  select.selectedIndex = i;
  break;
  }
  }
  }

  PS: If you are looking for the data rather than on the label simply change this line:
  If (select.dataProvider.getItemAt () .label ==)
  to do this:
  If (select.dataProvider.getItemAt ( ) .data == )

• Call a method before the following operation to set the selected values

  Use case: I display a VO as an ADF multiple checkbox select. This VO is the detail of a master/detail. I managed to store the selection state in a bean managed on autoSubmit. Then the user navigate to the record of the master, and then goes back to the previous record. The buttons next and previous were created using operations in data controls. I want to back up the State of the selection by clicking previous or next.

  There are a lot of tutorial on how to get the selected values, but none on how to set the selected values. How would you do it?

  11 GR 1 material JDev

  What I ended up doing:

  1 redefine listener action for the navigation buttons

  {} public void nextQuestion (ActionEvent event)

  saveSelectedState();

  navigateQuestion ("Next");

  restoreSelectedState();

  }

  {} private void navigateQuestion (string operation)

  OperationBinding operationBinding = ADFUtils.findOperation (operation);

  operationBinding.execute ();

  }

  2 Save and restore the selection state using bindings

  Guava Multimap

  Private ListMultimap selectedIndices.

  private void saveSelectedState() {}

  Get id question

  DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

  Question of rank = questionBinding.getCurrentRow ();

  Number questionId = (Number) question.getAttribute ("Id");

  JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

  int [] valueIndices = listBinding.getSelectedIndices ();

  selectedIndices.putAll (questionId, Ints.asList (valueIndices));

  }

  private void restoreSelectedState() {}

  Get id question

  DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

  Question of rank = questionBinding.getCurrentRow ();

  Number questionId = (Number) question.getAttribute ("Id");

  int [] valueIndices = Ints.toArray (selectedIndices.get (questionId));

  JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

  listBinding.setSelectedIndices (valueIndices);

  }

• Cannot set the search index location Windows 7

  After you perform a partition merge, I discovered that I can't set the Windows 7 search index location.

  What seems to happen is that the "disappearance" of the partition where the search index had been stored caused Windows to 'lose' the location of the index. What I mean is that the dialog box that usually shows the index location and where it would normally go on the definition of a new location, is empty.
  The following screenshot illustrates https://skydrive.live.com/redir.aspx?cid=0a3c5864e84dcfb7&resid=A3C5864E84DCFB7! 248 & Thierry = A3C5864E84DCFB7! 214 & authkey =! AB0LTOi0DCmsjH4
  The option "select new" is grayed out, and it is not possible to start the indexing service - probably because there is no index. Following the steps of troubling shooting is no help either (because he fails to step to start the indexing service).
  Any ideas? I hope that someone will know what registry entry, I can set up or change. I watch but couldn't find anything that seemed relevant and did not want to change whatever it is based on the work of the conjecture.

  You have a Setup disk for your operating system? If you do, perform a repair installation.  Done indexing your job before you have changed your score?

  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Keep the selected index of a HorizontalList

  I have a horizontalList which is filled with a data provider. My page never refreshes after an interval of 30, 60 seconds.

  I have 5 item in the list. So when I select an item in the list at index 3, his article is highlighted with a different color. Now, when the page is refreshed in 30 seconds, I lose the highlight. How do I keep on refresh highlight color so that I know how I look at one.

  I throw every time an event that refreshes the page and I store the index selected on my model. But I could not set the property of the element selected highlighted or selected.

  Here is the code I put in place.

  private void handleAppRefreshed(event:Event): void {}

  trace ("Index:" + model.selectedHLIndex);

  hlist.selectedIndex = model.selectedHLIndex; where hlist is the horizontalList

  }

  Any help will be appreciated. Thank you.

  KM

  Thank you. Once you refresh the data, you will lose the selectedItem. You can store the value and reset it after that data is returned.

• Failed to set the specified property while the session is running - 6552

  I created a program to run several different scripts.  The first time through my program works perfectly.  The second time through (without reset of the card, or re - download vectors etc.) but it fails.

  As he tried to run the following command:

  niHSDIO_ConfigureDataVoltageCustomLevels (DIO3_acq_session, 11-13, 18, 19', 1.8, 2.0)

  I have the following error:

  "Specified property cannot set while the session is running.
  Set the property before the opening of the session, or abandon the session before setting the property. »

  Any suggestions on what could happen?  Alternatively, any advice for troubleshooting techniques to learn more about the problem?

  I found my error:

  Several of my scripts include a list of markers so that the records are captured, and I download the recordings captured later.  Whenever I'm about to run a script that has files, I made the "niHSDIO_ConfigureAcquisitionSize" function in order to identify the size and quantity of records.

  However, the first script in my program that I run I don't need records captured, so I didn't bother to call the function "niHSDIO_ConfigureAcquisitionSize".

  So, first map like the default setting for the number of records for the first script (in which I do not bother with all the captured records), but then the subsequent pass in my stream of test cards do not like the fact that I have had set up for many more records that he caught (lack of markers / triggers).

  It's a little confusing to explain, but I found the problem, so any help is needed.

• I get "failed to set the refresh attribute COMMIT for the materialized view" when I try to create a MV using a table and another MV

  Experts,

  I'm trying to create a YOUNG refreshable ON COMMIT MV (xyz) using a table (circuit) and quickly updateable on validation MV (abc), but get an error:

  SQL error: ORA-12054: cannot set the attribute ON COMMIT refresh for the materialized view

  12054 00000 - "cannot set the refresh attribute COMMIT for the materialized view.

  * Cause: The materialized view did not meet the requirements for update to

  moment of validation.

  * Action: Specify only valid options.

  1] MV abc
  = MV abc defined as below =.

  CREATE MATERIALIZED view abc_MV

  Immediate CONSTRUCTION

  REFRESH QUICKLY YOU COMMIT using constraints of trust

  WITH ROWID AS SELECT n.*,.

  n.ROWID noderowid

  node n

  where n.nodetype in (1610000069,1610007267);

  
  

  -Above works OK and MV connect you on table node is created successfully

  =====================================================

  [ 2] Circuit Board

  ======================================================

  CREATE MATERIALIZED VIEW LOG ON Cramer.Circuit WITH SEQUENCE, ROWID ( ) -all columns of table ofcircut parentheses

  INCLUDING THE NEW VALUES;

  -More top works OK and MV connect you on table circuit is created successfully

  ======================================================
  

  
  

  
  

  [3] trying to create MV xyz
  

  ======================================================

  CREATE MATERIALIZED VIEW LOG ON cramer.abc_MV WITH SEQUENCE, ROWID ( ) -all columns of abc_MV brackets

  INCLUDING THE NEW VALUES;

  -Above works OK and log on ABC MV MV gets created successfully

  -Problematic step below

  Xyz_MV CREATE MATERIALIZED VIEW

  IMMEDIATE CONSTRUCTION

  REFRESH QUICKLY YOU COMMIT using constraints of trust

  AS

  SELECT c., c.rowid circuit_rowid, n.rowid tr_rowid

  the circuit c, abc_mv n

  where circuit2startnode = n.nodeid

  and c.rpplanId = n.rpplanId;
  ==========================================================

  Clues on how to solve this problem and make quickly updatable ON Commit MV xyz

  Thanks in advance.

  Chanchal,

  If you can read my original post carefully you may have noticed that all these restrictions will not apply in my case.

  All,

  In any case I found the solution to my problem.

  There are a few additional restrictions for materialized views multilayer

  Additional Restrictions for master materialized views

  The following types of materialized views may not be masters of editable materialized views:

  • ROWIDmaterialized views
  • Complex materialized views
  • Read-only materialized views

  I've updated the underlying MV abc below and everything worked like a charm

  CREATE MATERIALIZED view abc_MV

  Immediate CONSTRUCTION

  REFRESH QUICKLY YOU COMMIT using constraints of trust

  IN SELECT

  n.*, n.rowid noderowid, nt.rowid nodetyperowid

  the node n, nodetype_m nt

  where n.node2nodetype = nt.nodetypeid

  and nt.nodetypeid in (1610000069,1610007267);

  Note: To ADD a join without which I was getting error below (although had primary key on the table of the node)

  SQL error: ORA-23415: materialized view log for "NODE" does not save the primary key

  23415 00000 - "view the log for materialized \"%s\".\"%s\"does not save the primary key.

  * Cause: A primary key materialized view is refreshed quickly, but the

  The materialized view log does not record the primary key information.

  * Action: Use CREATING MATERIALIZED VIEW LOG... Command to add a PRIMARY KEY to

  start recording of the primary key information in the materialized view

  Newspaper.

• setting the selection list values in the tabular presentation

  Hi all
  
  I have a form of a table with a column that contains lists of selection I need to set the values for all rows in the form of tables.
  I'm trying to set the values on the click of a button, but apparently not enough to work.
  
  Is there another way to do it, perhaps with javascript?
  
  Any help would be appreciated.
  
  Kind regards
  Cleo

  Cleo,

  He's working now, sorry I missed the fundamental thing that you try on a selection list and not entry, as says my above entry script...

  Just use this code

  $('select[name="f10"]').val('Y');
  
  //OR this if you need to loop through them
  
  function approveAll(){
     jQuery.each($('select[name="f10"]'), function(i) {
      this.value ='Y';
    });
  }
  

  It was me!

  Published by: VC on July 13, 2012 15:57

• TreeView apex 5: set the selected node (or remember selection between page views)

  The Apex 5, I have a treeview to a page region. The user develops some nodes and click on a value, get the value selected (via Javascript) and use it to display data or navigate to another page.

  When the user navigates to the page containing the treeview control, it shows initially under the name collapsed and the selected node previously is not indicated visually.

  There is a dynamic Action that can be used to expand the tree (full), but how can I visually indicate the selected node previously? Is there an API for this in the treeview widget, or can it be done through some other Javascript?

  -Morten

  Hi Pavel,

  Sorry for the late reply... with your tip and some digging around, I managed to get this to work, and I wrote this in an article in blog for future reference:

  ORA-00001: Unique constraint violated: working with treeview Apex 5

  Thanks for your help! :-)

  -Morten

• Failed to get the selection in the selector column view obiee 11g

  Hello

  I try to select the perticular in coumn value mode switch. I don't have the values in the selection. I followed this link

  https://www.YouTube.com/watch?v=tedjkOzPab0

  Plese see the capture screen.

  In this product, doesnot show all results.

  is necessary change properties to view the values?

  

  

  Please help me.

  Thank you and best regards,

  A.Kavya.

  in this link the views column selector also works as a guest of table

  Sorry, but you will probably have to watch the video once more as the column selector will never serve as a row in the table, and in the video it does not display the values in the columns but only the names of columns selected in the column picker.

  This thread was not already answered? The brand went...

• "Failed to set the maximum number of files to open."

  This is the message I get when I open adobe illustrator and then it closes just, what do I do?

  I'm on a Macbook pro

  Error at launch. Unable to set the maximum number of files... | CS6 | Mac OS

  Mylenium

• Failed to set the new transformed selection model

  I'm having some trouble by a new ground of a selection in Photoshop CS6. If I just use the rectangular selection tool over an area that I would like to make a new pattern, I can go to Edition > use as a reason to make a new pattern of my choice. However, if I transform selection, or create a selection using ctrl-click on a layer, the option Edit > use as reason is not available. I could not find something online that explains why that would happen, so I decided to try my luck here. Any ideas will be appreciated! Thank you!

  Apparently rectangular selection with smooth contours is a deal breaker.

  If you go in quick mask mode and apply the threshold, then leave Quick Mask Mode is available ground again?

• Error scan Dell: failed to initialize the selected paper source

  My Dell Scanner doesn't scan.  error message: failed to initialize selected paper source. Thanks for your help with this.  It's a Dell Photo 926

  Hello

  From my research, I want to suggest to follow the steps mentioned below:

  (a) make sure that you have installed all Windows updates, you can either install update via Windows Update or download it manually. Here I recommend you to install the latest Windows 7 and Windows Server 2008 R2 Application Compatibility Update.

  Windows 7 and Windows Server 2008 R2 Application Compatibility Update

  http://support.Microsoft.com/default.aspx?kbid=974332

  b) unplug the printer.

  c) download Dell Photo all-in-One Printer 926 Patch to completely remove the printer from your computer. You must run this patch until he asked to restart the computer.

  Reference the Dell Photo all-in-One Printer 926

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&l=en&s=BSD&CS=04&DriverID=R166248

  (d) restart your computer.

  (e) to download the compatible driver Windows 7.

  Dell Photo 926 all-in-one printer

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20Photo%20926%20All-in-One%20Printer&v=Dell&uid=DELL926&pf=0&pi=3&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit

  (f) install the driver when connecting the printer (power on) via a USB cable.

  Hope this information helps.

• Failed to set the new CSS rule for the background image

  Hello

  Maybe I've finally lost my mind... I myself find it impossible to add a background image to the header of my project portion.  I select the "header" in the property Panel section, click on "add a new CSS rule.  Curiously, DW does not in the name of the selector for me, which is probably an indication that something is wrong, but I don't know what.  I went through the steps of filling in the name of the switch by hand, choose the .jpg file and setting is like a background image, but he never takes.

  There has got to be something simple that experienced users of DW can explain.  Go ahead, experts, you out there?

  Thank you...

  When things go south, it is almost always caused by a mistake of small coding somewhere.

  Unbalanced tags are the usual suspects.

  Run validation and fix the errors reported.

  Nancy O.

• Firefox android opens about.config homepage. Failed to set the new homepage

  Firefox android open always new tab or browser session about: config page.
  I restarted browser and Tablet (Samsung Galaxy Tab 3), and this behavior has not changed.
  All google searches suggest that the firefox browser android home page is not editable, but this is obviously not true.
  I tried the solutions that suggest to navigate to about: home and edit bookmarks and these paths do not work.
  The awesome bar is far from great.
  How to stop the browser from the start to about: config and how can I make the homepage be what I want?

  Solution found:
  Any time by the shortcut of firefox in the section at the bottom of my home screen Quick Launch I got about: config

  Whenever the opening of new tabs for navigation, I got about: config

  I removed the shortcut to quick launch firefox and entered the apps and the firefox shortcut added to quick launch

  The new shortcut follows my customization settings and opens to the best sites now, but also the new tabs to open up to the best websites

  Of course, there is a way to set a homepage of a shortcut somehow

  Unfortunately, this tablet was working properly at the time of purchase and I don't know how to change shortcuts yet, but they can be changed