New arrival 11 Pro, question?

Similar Questions

• [New Sony Vaio Pro] WiFi problem!

  Hey!

  I recently acquired the new Vaio Sony Pro 13 "."

  Everything seems to work admirably except for the Wifi card.

  In fact, the card works fine in a range of 15 feet around the router.

  But when I cross this beach, wifi download & upload speed drop strongly: download of ~ 20Mbps to 0, 5Mbps!

  This problem is clearly linked to the Vaio Pro as the other computers in my household are not such questions.

  What I tried to do:

  > Re-install card driver intel (available on the Sony site)

  > Change the properties of the map

  Unfortunately, these actions did not solve the issue...

  Do you have any idea what could be the problem and a way to fix it?

  A few ideas:

  > Card vice (bad connectivity,...)

  > Global issue with new laptops Sony Vaio Pro

  > Not good map properties

  > ???

  Hoping to get some answers,

  Kind regards

  Jon

  
  

• Yoga new tab 3 pro - I would return it?

  Hi, I'm having a real problem with my new yoga 3 pro tab and I wonder if I should just go back and exchange it. I want this tablet (with more ram, frankly), but only if it works well.

  The battery down slightly more than 10% an hour with light web browsing. (with the screen set to love with 35 percent) This is the real problem, but the browser blocks a lot too when I develop some links, he wakes up from his sleep by herself and then stays on about 10 minutes of waiting for me to enter my password, and autorotation - every time - keeps turning to the.

  Should I contact Lenovo and exchange it? Or is this common? I thought he had 18 hours for mixed use.

  Dave

  I think you will find that all of our YT3Pro have the problem.

  Lenovo got ram hogging of the nucleus, often up to 1.3 GB! Leaving the system yor and apps to run less than 700 MB of ram.

  Clearly, it sucks, and until it is resolved by lenovo, you will find that the device will come under critical conditions of ram, soetimes system crash.

  Users who are not the problems are clearly not focusing on their system, while other users are the low ram question a real problem.

  Like other devices use up to 300 MB for the kernel, we have actually been sold a 1 GB device. For a tablet of range modern sucks big time.

  For my part not buy lenovo again. Excellent material of poor software and support!

• Failure to scan on a brand-new 8620 OfficeJet Pro

  Hello

  I have a brand new 8620 Officejet Pro and use OS X v10.9 & use a laptop wireless and desktop via USB.

  On both final set-up print without any problem at all but when I try to copy, scan or something by fax printers touch screen comes up with "Scanner failure - cannot copy, scan, or use the fax". As a result, if I open the HP utility it says "device status: scan unknown error".

  I've uninstalled and reinstalled all software printer 4 times - twice by using the internet and twice using set up disk & each time the same result as above.

  I used the online help guide and followed all the solutions, but all without success.

  Anyone can offer any additional help please or is their real fault with it & the printer needs to be replaced

  Thank you very much

  Welcome to the @Stratford_HP forums

  I read about how your new Officejet 8620 shows you a failure "Scanner", leaving you unable to copy, fax and scan. I'm here to offer my suggestion and comments for this question.

  Try the steps in this guide for failures to scan first, and if the problem is still apparent, I suggest to call HP to inquire about a replacement printer.

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  Details of HP:
  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a fantastic weekend, I hope that my post was information!

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• HP Officejet Pro 8620e all-in: News Officedjet 8620 - Pro software from scanning

  The Analysis dialog box does not allow me to check the "automatic crop" function for scanning on my new HP Officejet Pro printer 8620 e all-in-one.

  Hey @JJP1,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that your framing auto option is grayed out when you scan for your Officejet Pro 8620 e-all-in-one printer to your PC for Windows 10. I can help you with that.

  To select Auto Crop:

  1. Open HP Scan.
  2. Next to the Source, select the option of flat.
  3. Click on advanced settings.
  4. Next to Type, select Photo.

  Now you should be able to select Auto Crop.

  Please let me know if you have any other questions. If not, have a great day!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Error message C8190014 to the FIRST boot of the NEW HP Officejet Pro X576dw

  Hello, a few minutes ago, I tried to install a brand NEW HP Officejet Pro X576dw (out of the box) for the FIRST time (it is not my FIRST printer installation!). Of course, I followed detailed procedures. When I pressed 'Start' I've seen for a very short time the first image on the screen where I have to choose the language, but before you make a choice, I get a bluescreen error mentioning C8190014 and after a second, I get a screen where all the icons are flashing and message: close and re-launch your printer.

  The process of re-starting organizes not anyhting!

  Help! And thanks in advance.

  Solution: you call HP support , your printer is considered DOA (dead On Arrival) , you get a credit note , return you the printer (at your own expense) , and you buy another (you pay once more transport) !

• New 13 "Macbook Pro - leave it on or turn off?

  Bought a new 13 "Macbook Pro. What is the right way to use it? I'm on the computer all day, usually early in the morning and again in the afternoon. The last computer I bought they advised me to just leave all the time and put it to sleep. Now some say to turn it off. What is the right way to get the most life out of my computer? Thank you!

  Have sleep/power nap when not use.

  Once a month drain to 10% battery and then recharge it fully.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• New Mac Book Pro

  I need to buy a new Mac Book Pro, so I can run FCX.

  I don't know how much Ram is better without killing.

  and what would be a good to have installed graphics card.

  I've only used the iMovie version 6 and it's time to ride.

  Read here:

  http://www.Apple.com/au/Final-Cut-Pro/specs/

  Al

• I have a new mac book pro, I need to copy my stuff from my old mac pro book

  Hi all, I just splashed the money and got myself a new mac book pro, without the DVD player.

  Now I would like to transfer all my stuff from my old book of mac pro, the easiest way and fastest possible.

  while I was in the store to spend my money, the guy told me that I can do by connecting two computers together via Firewire/stroke of lightning and using Time Machine!

  I have an adapter Firewire/Thunderbolt and a Firewire cable :-)

  But I would like to have someone, somewhere to point me in the right direction so that I'm not kidding, I did it this way before, are there details step by step anywhere please, I don't can find any info anywhere else!

  Thanks for looking and if you can help/advise so much better :-)

  Tim

  The 'easier and faster way' is to boot your old MacBook Pro in target disk mode and follow the instructions to move your content to a new Mac - Apple Support.

  Instruction to start in disc Mode target-> share files between two computers with target - Apple Support disk mode

• my new keyboard smart pro ipad can't connect my ipad pro.

  my new keyboard smart pro ipad can't connect my ipad pro.  Please tell me how?

  You do not have to be paired:

  Use your Smart keyboard with iPad Pro - Apple Support

• I have a new Apple retina pro, and tried to install a child of 3 years applecare not open on my computer, but it does not recognize the code that accompanies it. any ideas, I live in New Zealand

  I have a new Apple retina pro and I am trying to install a 3 year applecare, unopened. It will not, except the code, any ideas. I live in New Zealand

  It has expired. You can buy guaranteed nine aa.

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.