Failure (error code 39) USB driver
All my USB drivers have the yellow triangle and in properties it says driver may be corrupted or missing (code 39). Re-install makes no difference. However, update tells me that the driver is up-to-date. Any ideas?
You can check the following registry key? :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)
Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?
If so, what is the 'data' for these names?
Tags: Windows
Similar Questions
-
Update for Microsoft Security Essetials KB2804527 (4.2.223.1) Installation failure error Code: 0x8004FF83 all other updates installed OK.
What version of Microsoft Security Essentials you run?
What operating system and service pack?
Prior security software?
No matter what security software installed again?
Please read the following:
A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.
You may need to use a cleaning tool to remove your prior security software:
The current time and the date now in Ohio, the United States is
07:28Wednesday, February 27, 2013
UTC - 0500 (EST) Eastern Standard timeUTC/GMT is 12:28 on Wednesday, February 27, 2013
Current weather conditions in ColumbusCloudy4 ° C / 40 ° F -
Upward until about a week ago Windows Media Center records very well. Suddenly, none of our TV shows will record. He gives us the same error message:... .to was not recorded. There was an unexpected failure (error code 771). I checked our storage and we have plenty of space for recordings since we generally remove them after watching. The computer will not be because of sleep mode that I was on the computer when the bubble of error is displayed. It will record only if I go into the Media Center and hit record on a show that is presented on the airwaves at the time. It does not freeze during recording, just won't save.
Hi Adolpha,
1. don't you make changes before the show?
Try the following steps to set Windows Media Center Receiver Service local only and check the result.
a. Click Start, type services.msc and press to enter.
b. in the list of services, double-click "Windows Media Center Receiver Service"
c. change the startup type to automatic, and then click Start.
d. click the Log on tab, select "Local System account".
e. click ok to apply the changes and restart the computer.
f. check if the problem persists.See the question "What should I do if Windows Media Center is unable to record a show?" in this article.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Image processing failure: error code: 1004
When you export to DropBox of Lighroom I get this error: image processing failure: error code: 1004
Under which it lists all the images that I export.
99% of the time the images for export to the correct location and look good. But the error always comes to the top. And every now and then photos are not really exporting.
Windows 10
Lightroom Version CC 2015.3
Thank you!
Try to reset the preferences of the instructions here file
-
Pavvillion 23 all-in-One: hard disk failure error Code Test DST
The system does not start, nothing on the screen after a few secods logo.
The Diagnostics fail harddirve DST short test (after 15 seconds, it is perhaps reproducible, he never other tests not sure if more would fail)
Error code is
Q0EDAC-0007LQ-PXPAXG-60WL03
How can I find more details about this error so I can understand the next step? Currently all I know it is something with the harddirve, which of course is a worry, although he seems to be alive at least made me hope that I can recover the data).
Dee
You receive the error code 303 code, means that the hard drive is or it does not and must be replaced.
To recover your data, put this drive in a caddy to drive down external hard usb, you should be able to copy the data to another computer.
-
Hi, I'm 43 error code while the plugin my usb card with asus computer laptop X55C. I tried several methods indicated on the window on the error code 43 site but I have not any solution even took me out of my laptop battery usb recognize, but it did not work. I uninstalled the Device Manager usb driver, but it also does not work please help me.
Hi Daman,
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
You made any hardware or software changes on your computer before the show?
Thank you for details on the question and your efforts to resolve.
This problem can occur is because of corrupted USB drivers or incorrect settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Run this Microsoft fixit and check.
Reference:
Hardware devices do not work or are not detected in Windows
https://support.Microsoft.com/en-us/mats/hardware_device_problemsIf this does not help, use method 2.
Method 2:
Download and update the chipset and drivers USB of your computer from these links and check the issue.I hope this information helps.
Please let us know if you need more help.
Thank you
-
I'm doing a clean Windows 8.1 64-bit as a result of a fall, but I'm getting 0xc0000225 error code, using built-in HP recovery utility. Installing Windows also says: Windows could not retrieve information about the disks on this computer. Kindly help. Thank you
If your computer is originally shipped with Windows preinstalled by HP (as it should) - it would be better to use the HP recovery media that will repair Windows, applications, and all the default partition to factory. It will use the license of your machine for Windows and should automatically active Windows after installation.
If you are using the 8.1 Windows installation media, you may need a facility to post license Win (depending on the type of used windows).
-If you want to use the original that are preinstalled windows, you can get a HP recovery media as described above
-If you are using the 8.1 Windows installation disc and install Windows from using your driver's license, follow these steps:
1 boot from the Windows DVD
2. click on install now
3. in the configuration screen, click Custom (Advanced)
4. click on Drive Options
5. Select the partitions to format
6. click on Format - this will delete EVERYTHING on this partition - format and delete all partitions
7. create a new partition, and then select a partition to install Windows on.
8. continue the installation.If the Windows installation disc does not work for the above you can do the following to reformat your hard drive:
1. download a Gparted ISO from here:
http://gparted.org/LiveCD.php2 burn the ISO to a CD or DVD
2. start from the CD/DVD of Gparted disk.
3. use Gparted to delete all partitions on the hard disk.
4. under 'Device' choose Create Partition Table to a new table partition.
5. create a NTFS partition (or you can wait and create a partition during the installation of Windows).Finally, boot from the Windows installation disc and install Windows.
Let me know if it works for you
-
I get error Code 1327 Invalid Drive F
I can't update or remove Adobe Reader. Whenever I get the error error Code 1327 drive not valid F. I can't open my PDF files. It won't let me not uninstall Adobe Reader 9, so that I can reinstall and I can't update. I have no access to any of my PDF files. I am working on my PhD and have tons of research in PDF files that I need to be able to access. Help, please!
http://kb2.Adobe.com/CPS/404/kb404946.html Check This! Be careful!
-
Update Windows failure error code 8e5eo147
Vista Home premium 32 bit service pack 2. put said updates available, proceed through the download and installation process and get the message that says installation failures update windows error code 8E5E0147... ran fixit from microsoft which has replaced components update... problem persists
Gary,
Run SFC/scannow Windows 7 & Vista
System File Checker (SFC) verifies that all files of Windows 7 are where they should be, and they are not corrupt.
http://pcsupport.about.com/od/toolsofthetrade/HT/SFC-SCANNOW.htm>
Rename the software distribution folder
1. stop the Windows Update service (make sure that you are logged on as administrator)
Start button | Control Panel | System and Maintenance | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click on stop.2. click on Start, type %windir%\System32 in the search box and press ENTER.
Find and rename the folder C:\Windows\SoftwareDistribution.
3. start the Windows Update service
Start button | Control Panel | System and Maintenance | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click Start.Important: Restart the computer, and then run Windows Update again.
Rename the software distribution folder will erase your history on the Windows Update Site.
Whenever you want to check what updates are installed, you can: -.
Start button | Control Panel | Programs
Under programs and features - click View installed updates.Access the KB971058 article through Internet Explorer (only)
Click here: reset Windows Update components and run the fix it 50202? default and aggressive mode.
http://support.Microsoft.com/kb/971058>
UTC/GMT is 04:18 Thursday, August 9, 2012
-
error code 20378901 installation driver update in windows update
I get an installation failure for windows vista update for nVidia - network - NVIDIA nForce Networkin Controller - the error code is 20378901.
relocation link is not valid. Help!
Hello
How do you try to update the drivers?
Are you using the correct link for the download of Networkin Nvidia nForce controller?
I suggest that you select the correct network controller model number, download and install the drivers from the following link:
http://www.nvidia.com/download/index.aspx?lang=en-us -
22/12/2012 bought ASUS CM6780 PC running 64-bit. RALink Wireless LAN crashed my system twice in 10 months. ASUS support allows only a "System Restore" which means you start from scratch with ALL your programs, updates etc etc.
I get the error code indicating 'Bad Image' with several pop-up window for what I am running, and the Ralink Lan has an error code 31 showing Windows cannot update.
I have my 1 year warranty AND a 3 year warranty, I purchased in addition to this, but the ASUS support is lame. Only help to restore the system not to find a real solution, and when I ask a new LAN card, they do not respond.
Is this a problem with updates of Windows or Ralink?
Please advise, downtime for each episode runs more than 24 hours, restore my programs and update everything. I'm ready to trash or sell it!Send the minidump to analyze what is causing the BSOD,
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31). So install the Ralink wireless driver.
-
Ink system failure error Code 0xc19a0013 HP Officejet 6500 has
Printer has stopped printing in black ink: get a gray tone or no impression. Get higher up the ink system failure error.
Reviewed the help pages and have installed new black ink cartridge, check the squares of all the cartridges, clean the print head menu Tools, removed the print head and cleaned manually, unplug the power supply etc. Considered the responses on the forum pages. A ran HP print and Scan doctor. I consider when buying a new print head or a new printer, any other suggestions? It's only black ink. I ran a test page and the black box of the ink is interesting: instead of going from the darkest to the lightest he's going from light to dark to light again. Thank you, Sue S.-S.
You're welcome Sue
See post below on Bob soak the printhead...
(1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
(2) remove all ink cartridges, then remove the print head Assembly.
(3) gently put the printhead nozzles down in water and soak for 5 minutes.
(4) remove the print head and gently dry the electrical contacts.
(5) replace the print head in the printer and then reinstall the ink cartridges. -
Repeated update of Windows Installer failure - error code 80244019
Just got a new PC at work with Windows 7, 32-bit. In the many attempts to install the updates, get an error code 80244019. Please - what is this error?
Hi tbarmranch,
Follow the steps in the l ink and check the results below.
Windows Update, error 80070422, 80244019, or 8DDD0018 (for Windows 7):http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80070422-80244019-or-8DDD0018
Note: You mayrun virus scan on the computer by using a scanner online from the link below:http://onecare.live.com/site/en-us/default.htm
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Installation failure: error code 0 x 643
Whenever I power off, told me not to stop because that Windows updates, but it never updates and it repeats all the new next time too.
I am running Windows XP with S3, but do not use the software MS Office or Works. I prefer more Open Office. This may be part of the cause?
Hi j0hnselah,
You can check if this article helps.
-
Photoshop download failure: error code 15
My download fails with the error code 15. I rebooted my system several times. I am running Windows 10 on my Lenovo Yoga 2 Pro. Here is the error:
Exit Code: 15 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s) ERROR: Media DB Error : 6 -------------------------------------------------------------------------------------
Please see this document for more information on this message:
https://helpx.Adobe.com/x-productkb/global/installation-launch-log-errors-creative.html
Guinot
Maybe you are looking for
-
HP Pavilion 14-b150ej Sleekboo: my HP Pavilion 14-b150ej Sleekbook supports WiDi/Miracast
Hey,. I would buy the "N Microsoft Wireless Display Adapter" and I want to know if my HP Pavilion 14 - b150ej Sleekbook supports the WiDi/Miracast. THX.
-
Virus attack/infected system detected Norton AntiVirus.
I got a message from my Norton Antivirus program as follows:"System infected: TidServ activity 2." Computer attack: Io4undreyk.com (93.114.40.221, 443). The attack was a result of the \DEVICE\HARDDISKVOLUME1\WINDOWS\SYSTEM32\SVCHOST. EXE. "Source ad
-
Keyboard dock does not charge on the propeller
I had the power drain from the dock, there remains 5% tablet. When you try to load with tablet in dock, to restart, it would say error fan of keyboard dock, press F1 to continue. Only problem is that the dock was dead and don't react only not to the
-
Computer re of start-up after the crash of the system office.
After you download the Microsoft Windows malicious software removal tool, I performed a full scan and tried to restart my computer, but it did not work. I got a black screen with an error message indicating that it is ""a problem communicating with a
-
Newbie user-NAT, PAT, the two PIX?
Hello I'm test I set up my PIX 515e barriers make the lives of my users living hell, and I don't know I do NAT PAT or both. I have an internet connection through a cable modem that is currently connected to a Linksys router. I'll say goodbye to Links