Failure General while ping all IP

Similar Questions

• Is it possible to speak with a technician if I am using Dial-up Internet? It seems that I waited more than an hour while trying all the time to connect.

  Is it possible to speak with a technician if I am using Dial-up Internet? It seems that I waited more than an hour while trying all the time to connect.

  original title: Online Tech Support

  Hi Cindy,.

  No, unless you have a second phone line, using a cell phone, or try something like Skype on your computer.

  Try to connect to what?  Technical support for what?  Of course, you could connect here, so it works.  What is the problem that you are looking to get help?

  I hope this helps.  If we can help, let us know.

  Good luck!

• Update for microsoft security essetials KB2804527 (4.2.223.1) installation failure error code: 0x8004FF83 all other updates installed OK

  Update for Microsoft Security Essetials KB2804527 (4.2.223.1) Installation failure error Code: 0x8004FF83 all other updates installed OK.

  What version of Microsoft Security Essentials you run?

  What operating system and service pack?

  Prior security software?

  No matter what security software installed again?

  Please read the following:

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

  You may need to use a cleaning tool to remove your prior security software:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  The current time and the date now in Ohio, the United States is

  07:28

  Wednesday, February 27, 2013
  UTC - 0500 (EST) Eastern Standard time

  UTC/GMT is 12:28 on Wednesday, February 27, 2013

  Current weather conditions in Columbus

  Cloudy4 ° C / 40 ° F

• In Windows Media Player 11, I would like to change the album art integrated for all the songs in an album while removing all previously used album art.

  In Windows Media Player 11, I would like to change the album art integrated for all the songs in an album while removing all previously used album art in advanced tag editor. My mP3 player only displays art on top of the list of advanced tag editor and WMP automatically puts most recent album on the background art. Is there a way to change this?

  Hello

  Try the following steps:

  a. connect to the Internet.

  b. open Windows Media Player.

  c. click on the Library tab, and then go to the album you want to resolve.

  d. right click on the album and then click on Find Album Info.

  e. If you get an error message that says you must change your privacy settings before you can update media information, follow these steps: click on the Tools menu, click Options, click the Privacy tab, and then clear music update files by retrieving the news media from the Internet check box. Then, in the library, repeat the previous step.

  See the following articles for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/wheres-my-album-art-fixing-song-titles-artist-names-and-more-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-change-album-art-in-Windows-Media-Player

• Failure general ping 127.0.0.1

  Hi all

  I have a problem with my Windows 7 Dell computer. I use Verizon Fios for Internet access. The computer can connect with the router. But I can't access the internet. When I typed ping localhost and ping 127.0.0.1, I had a general failure. I tried to run the command netsh int ip reset c:\resetlog.txt, it shows Reset successfully, you need to restart, but I could not know resetlog.txt before and after I restart the computer.

  Can someone help me solve the problem? Thanks in advance.

  Have you checked whether these problems always occur when you disable your firewall and other protection? Be sure to allow them once again after testing!

• Printer error 0x610000f6 General on Photosmart all-in-one C309n

  Whenever I print, I get a general printer error on my HP Photosmart all-in-One Touch Smart C309n; the error number is the same every time: 0x610000f6.  I have to press OK on the screen of the printer to empty before printing again.  Sometimes it will show all the work until the error comes up, but other times it will bring up the error after the first page, and I have to turn it off to get the rest of the print job done.  Help, please!  Thank you!

  The code you get is normally caused by an ink system failure, but those who won't let you push OK to get in front of them. Your printhead may be out. The print head would be out of warranty now, as is the printer, so the only thing you can do is to try to clean the print head. The document following the link will take you through the steps of cleaning and aligning the print head. The place in the document that tells you the following steps are labeled step 4 and step 5 under Six Solution in the document. If the message continues to rise, you may need to physically clean the print head. The steps to do this are in a post from Bob_Headrick. She is tied below the document mentioned above.

  Print quality:
  http://goo.GL/dZvCV

  Bob_Headricks steps to physically clean the printhead:
  http://goo.GL/DfroJ

• Update Windows 7 Edition Home Premium to professional while retaining all my files installed in program files and information?

  Original title: Gareth.

  I have 64 bit laptop with Windows 7 Home Premium installed. I just bought a new Windows 7 Professional and legal (OEM) version. How he use to upgrade my version of Windows 7 and keep all my files installed in program files and information? In other words, not a clean install!

  Unfortunately, there is no option to do an upgrade, because what you have is an OEM license.

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  If you want to keep your programs and files, you will need to use a full version or upgrade Windows 7 professional retail license and use the key with the Express upgrade.

  OR

  Purchase an upgrade with anytime

  First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click the option to purchase a key. Wait while loading of the Express Upgrade page, click on the Windows 7 Professional Upgrade to buy it.

  Click Next, fill in your details (it is important that you do this because the product key will be sent to you as a backup in case you need to reinstall) enter your credit card information, click next to begin the upgrade, wait while checking the key, accept the license agreement , click upgrade, wait while the software updates, (it may take 10 minutes or more, depending on the case, updates are required), your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade, a windows will pop up by notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional, your files, programs and settings stored, proceed to activate Windows 7 Professional.

• HP Photosmart 6380 printer: ink system failure Oxc19a0020 HP6380 Photosmart all-in-one

  HP Photosmart 6380 while a printer 0xc19a0020 I unplugged, ink system failure it and reinsert the ink cartridges, still get the same error message.  What to do next?

  Hello

  I regret to inform that Oxc19a0020 ink system failure is a fatal problem.

  Please contact your local HP support for more support information.

• Client VPN connects but cannot ping all hosts

  Here is the configuration of a PIX 501, which I want to accept connections from the VPN software clients.  I can connect successfully to the PIX using the 5.0.0.7.0290 VPN client and I can ping the PIX to 192.168.5.1, but I can't ping or you connect to all hosts behind the PIX.  Can someone tell me what Miss me in my setup?

  Thanks for your help.

  Chi - pix # sh conf
  : Saved
  : Written by enable_15 at 03:49:39.701 UTC Friday, January 1, 1993
  6.3 (3) version PIX
  interface ethernet0 car
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the encrypted password
  encrypted passwd
  hostname chi - pix
  .com domain name
  fixup protocol dns-length maximum 512
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol they 389
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  list-access internet-traffic ip 192.168.5.0 allow 255.255.255.0 any
  Allow Access-list allowed a whole icmp ping
  access-list 101 permit ip 192.168.5.0 255.255.255.0 10.10.11.0 255.255.255.0
  access-list 102 permit ip 192.168.5.0 255.255.255.0 10.10.11.0 255.255.255.0
  pager lines 24
  opening of session
  debug logging in buffered memory
  ICMP deny everything outside
  Outside 1500 MTU
  Within 1500 MTU
  IP address outside pppoe setroute
  IP address inside 192.168.5.1 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  IP local pool ippool 10.10.11.1 - 10.10.11.254
  PDM logging 100 information
  history of PDM activate
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) - 0 102 access list
  NAT (inside) 1 list-access internet-traffic 0 0
  group-access allowed to ping in external interface
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  RADIUS Protocol RADIUS AAA server
  AAA-server local LOCAL Protocol
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  Crypto ipsec transform-set esp - esp-md5-hmac GvnPix-series
  Crypto-map dynamic dynmap 10 GvnPix-set transform-set
  toGvnPix 10 card crypto ipsec-isakmp dynamic dynmap
  toGvnPix interface card crypto outside
  ISAKMP allows outside
  ISAKMP key * address 0.0.0.0 netmask 0.0.0.0
  ISAKMP keepalive 60
  ISAKMP nat-traversal 20
  part of pre authentication ISAKMP policy 9
  encryption of ISAKMP policy 9
  ISAKMP policy 9 md5 hash
  9 2 ISAKMP policy group
  ISAKMP policy 9 life 86400
  vpngroup address ippool pool chiclient
  vpngroup dns 192.168.5.1 Server chiclient
  vpngroup wins 192.168.5.1 chiclient-Server
  vpngroup chiclient com default domain
  vpngroup split tunnel 101 chiclient
  vpngroup idle 1800 chiclient-time
  vpngroup password chiclient *.
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 30
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 30
  management-access inside
  Console timeout 0
  VPDN group chi request dialout pppoe
  VPDN group chi net localname
  VPDN group chi ppp authentication pap
  VPDN username password net *.
  dhcpd address 192.168.5.2 - 192.168.5.33 inside
  dhcpd dns xx
  dhcpd rental 86400
  dhcpd ping_timeout 750
  dhcpd outside auto_config
  dhcpd allow inside
  Terminal width 100
  Cryptochecksum:
  Chi - pix #.

  On the PIX configuration seems correct.

  I guess you try to access hosts in 192.168.5.0/24, and these default hosts is the PIX inside interface 192.168.5.1?

  How you try to access these internal hosts? If you try to ping the hosts, please please make sure there is no personal firewall enabled inside welcomes as personal firewall normally doesn't allow incoming connections from different subnet ip address.

• Why are there double while "show all bookmarks"?

  I opened my library of Favorites and there are duplicates of everything.

  I see:

  History (with the clock icon)
  Downloads (with the arrow pointing down)
  Tags (with the tag icon)
  All the Favorites (with the book icon)

        Bookmarks Toolbar (star icon)
        Bookmarks Menu (menu icon)
        Unsorted Bookmarks (tray icon)
        Bookmarks Toolbar (blue folder)
        Bookmarks Menu (blue folder)
        Unsorted Bookmarks (blue folder)
        Bookmarks Toolbar (blue folder)
        Bookmarks Menu (blue folder)
        Unsorted Bookmarks (blue folder)
        Mobile Bookmarks (blue folder)
  

  History (purple folder icon)
  Downloads (purple folder icon)
  Tags (purple folder icon)
  History (purple package)
  Downloads (purple package)
  Tags (purple package)

  I would like to get rid of the double, but I can't delete them. (Right click gives a delete option greyed).

  Recently, I restored my phone and laptop at the same time to the factory settings, but I don't remember if I signed out of sync or not.

  If that is why he is double, how can I get rid of them?

  Thank you!

  The fixed.

  I deleted the folder of firefox in library > Application support > Firefox

  I deleted my firefox sync account.

  I reinstalled firefox.

  I made a new account of firefox sync.

  Not funny. Chrome is looking very good right now.

• Black ink failure Photosmart 5510 e - All in one series

  Hi all

  Just bought the 5510 all-in-one PC world.

  2 questions.

  1. I can print it, but no (or little) black ink. I swapped the cartridges (in which case one provided in the box was a dud) but the same thing happens. No impression, or very light gray.

  2. I can print an alignment page, but the analysis fails, no suggestion of how to solve the problems, if alignment is dead in the water

  I lived all the troubleshooting onboard and used the mac based system to solve problems too.

  Nothing helps.

  (With no black ink), I can print from iphone or mac.

  Please help if you can.

  Thank you

  Ben

  Hold button power for 20 seconds and then turn off the machine, then hold for 20 seconds then turn on the machine and this machine is turned on, press and hold the power button for three seconds following. This piece of lunatic of advice was given to me by the support. It worked. Which is lucky for them. Apparently not a ridiculous idea.

• Vista: access to the file of the owner refused while having all possible rights

  Hello.

  I have a weird with my Vista Ultimate problem when I try to read some files and folders on my NTFS partition: I have full access rights and I am an owner of these objects (controlled by the editor of access rights), but when I try to play the files in these folders (play videos, listen to music or simply copy these files)-windows get an 'access denied' error box. All the content of these files normally appear in the Solution Explorer and I even to able to delete and move these files - but this isn't for playback/copy. This problem even when I have logged in as the built-in "Administrator" account. I don't know why. I had even checked all this disc via 'chkdsk /f' (reboot) - no errors found and still no effect.

  Please, help me - maybe u already had similar problem!

  My Vista Ultimate is critical updates of the last MS Update center. I have Kaspersky Internet Security (antivirus/firewall) installed with all latest updates and no viruses not found on my PC.
  The previous Windows on my computer was also Vista (but another edition) and I got no problem with these files at this time.

  Serresjio,

  Has. see if this MSKB helps:
  http://support.Microsoft.com/kb/313222/en-us
  "How to restore the security settings the default settings?

  B. reading:
  http://blogs.msdn.com/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

  1. try to delete these files by using the software and workarounds in my http://blogs.dotnethell.it/vincent/Tip-elimina-i-file-ineliminabili__1191.aspx Blog post (ignore the Italian language).

  2. try to uninstall Kaspersky Internet Security and test:
  2 a. http://USA.Kaspersky.com/support/193239348/
  2 b. KAVRemover is a free utility which helps you to remove completely all the products of Kaspersky Labs (Download KAVRemove).

  3. If still no joy please don't try the Public Newsgroup Microsoft for Windows Vista:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.Security
  Or:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.file_management

  If you post in the Microsoft public newsgroups please quote this thread:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/e66cdfa4-2e65-4381-ae62-8eb123fb4e41

  Hope this helps,
  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• hard drive failure, System Restore, now all of my media and documents files are missing, just GONE. all ideas

  I was workiing online, and I started to have problems with ie10, freezes, stop down, and then the entire HDD crashed, any program, file system went. System Restore used to regain control of my computer, but now all my media files, music, photos, everything is over. How can I identify and restore them. Documents open in word, but there is no trace of them in the library files... etc.

  Your hard drive has failed. If she had done this you would have to buy and install a new one, and you would have lost everything.

  If it just crashed and you have used system restore and running to get to the top, then all is not lost, probably... unless the files are damaged by the accident.
  Do a search on your hard drive. To find the word docs using "* .doc" (without the ""). To use "*.mp3" mp3, wmv files use "*.wmv" etc. The asterisk (*) is a wildcard and the search results will include all these files, the research is on your hard drive.
  Make note of their location and then reorganize their or re - point your assets their location.
  See you soon,.
  Jerry

• Authentication failure TMS while improving the TMSPE to 1.4

  Same problem as https://supportforums.cisco.com/discussion/12333951/tms-authentication-error-while-installing-tmspe here

  But while trying to TMSPE of 1.3 to 1.4 after completing the MSDS go to 14.6

  1.4 deployment guide mentions "Cisco TMSPE has been tested with Java 7, updated 51, 32-bit and 64-bit versions"

  Which is the same as TMSPE 1.3

  If the doc is fake or this time, it's a different question than the Java version

  I had the same problem as you, improved TMS to 14.6 and then tried to update TMSPE to 1.4.  One thing I did and it solved my problem is to reboot the server after that updated MSDS to level, before attempting to upgrade TMSPE.

• Make an editable region while maintaining all of the page read-only

  Hi all

  I did a whole page as readonly by the following:

  ClientUtil.setViewOnlyRecursive (pageContext, webBean);

  Now I want the whole page is readonly except a sub-tab used in the page.

  <oa:subTabLayout id ="subTabLayoutRn">

  <ui:content>

  <oa:header id ="tasksTabRN" extends =' / oracle/apps/ozf/claim/webui/TasksTabRN '/ >

  < /ui:content>

  <ui:SubTabs>

  <oa:subTabBar id ="subTabBarsRN">

  <ui:content>

  <oa:link id ="tasksTabLink" text ="Tasks">

  <ui:primaryClientAction>

  <ui:firePartialAction event ="updateSubTab"/ >

  < /ui:primaryClientAction>

  < /oa:link>

  < /ui:content>

  < /oa:subTabBar>

  < /ui:SubTabs>

  < /oa:subTabLayout>

  This subtab I want to display as editable. Kindly can anyone provide suggestions on how to achieve this?

  Thank you

  Arpita

  I use selective ClientUtil.setViewOnlyRecursive (pageContext, webBean); and this has solved my problem.