Failure of cat
Hello
I have iphone and DX80 registred CUCM and IM & presence I cam make voice and video conferencing device but I can't discuss between the two devices.
Hello
Can you be sure if you have selected the type of account as Im & presence?, also, check your connection status to Softphone, otherwise check the UC Service for Im & presence is configured in CUCM and check the box 'Allow the user for instant messaging and presence' is enabled.
Tags: Cisco Support
Similar Questions
-
Creating cloud update failure, reinstalling does not, nothing will work and cat is not high!
Help!
For the Code 43 error, please see the following links:
Error 43 - I can't download any adobe apps CC or creative cloud Manager
Creative cloud, re-install-Dungeon error 43
Error in downloading, installing or updating Adobe Creative Cloud applications
-
Recently, I had 2 different cats with HP Tech Reps in which they used their remote control programs to check on the problems that I had with my new HP Envy 5560 all-in-one. The next day, at the start of my desktop PC, I got the warning message: "" imminent hard drive failure: if it please take a full backup and replace immediately. "" I did a scan from HP and it showed nothing wrong. There are no pop icons - up or whatever it is on my desktop screen to indicate a problem. The hard Seagate I have is only 1 years and 89% free space left on it and there is no problem, other than being slow sometimes, before the cats remote and the PC warning. I came to the forum looking for answers, and the first thing I noticed was a post to say today 09/04/2015 Bent Canuck: "HP Envy Hard Drive Failure" at 06:22. What a coincidence. Think are? Only some 20 hours from the time I myself first 'hard drive Imminent failure warning' and only about 40 hours after the remote programs have been downloaded (twice) and the rep tech, taking control of my computer (twice).
I ran all the diagnostics that my intermediate PC experience tells me to do. I checked in the BIOS and I checked all the HP, troubleshooting, etc. on the Assistant HP program performance. I can find no reason for the hard drive to be failing. I didn't notice it do anything else to be a little slow to start sometimes and slow to load stuff onto the internet, I have assumed it was probably malware and spyware that I must find a way to remove at one point, but I have received no warning about things either. I get the same caveat and I did a full back, but...
Can someone tell me what to do or how to check and see what the problem is until I have to just chuck the drive because of this warning?
Thank you for the additional information.
Did you run the BIOS CHIP to test your hard drive? Also, I don't think that the added hard disk HP software had nothing to do with the message you receive.
-
Some updates could not be installed: failure on the following security updates - KB974811 KB974556
Please help me solve this problem. I have automatic updates set to say "updates are ready for your computer. Click here to see these updates'; Here is the little yellow icon in the system tray low to the right of my screen. What happens when I click on this icon is usually I then click 'express install' (and non-personalized) and then press "install".
My computer sometimes slows down a bit that it downloads / installs these updates and which can be quite a pain in the thigh because it effects everything that I'm working at the moment, and of course because you have to restart the computer. I have external hard drives 4 or 5 so I to sequentially turn them off one at a time by ejecting them, turn off the computer and then start it back up and restart the hard drives.
In any case - I can never remember to "SOME UPDATES COULD NOT BE INSTALLED the SCREEN" so I'm at a loss to know what to do. My computer is perpetually slow because the small yellow Update icon sits in the systray continually trying to draw attention to me and when I do the same thing continues to be time and again - failure! I tried closing down my antivirus and windows firewall, but nothing helped.
your help would be much appreciated, either tell me how these updates to get the update of my systray icon, or to get updates of pit.
According to belarc Advisor - I am running:
Windows XP Media Center Edition Service Pack 2 (build 2600)
3.00 gigahertz Intel Pentium 4
cache of 16 kilobytes main memory
secondary memory 2048 k-cached9 of Avira antivirus
SUPERAntiSpyware (although it is installation not not at the auto of the msconfig, so its off to the update)Thank you!!
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Failure code critical 3 media center units
Last night my computer automatically updated and this morning when I started the Media Center, he had the message, critical failure: code 3
Some of the files needed to play the radio or media are missing or corrupt. Record of components Media Center may have failed.
I think that this problem has something to do with the update from last night. Can someone help me please? I have a Windows XP Media Center.You are in the Vista update Forum.
They will help you in the newsgroups below:
Microsoft.public.windowsupdate discussions
XP discussion groups:
Link above is to the XP newsgroups.
There is a list of groups of discussion XP to the bottom of the left column.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
Failure of perpetual update KB948465 (error 800b0100)
original title: failure of perpetual update KB948465
Hi all
I have a Dell Inspiron I1720: 32-bit, Windows Vista. Windows Update KB948465 (Windows Vista Service Pack 2) has been lacking since 07/08/09. 800b0100 error code, try manually downloading/running it on the MS site, no "System Update Readiness Tool" appears to me. Tried to uninstall antivirus, disabling firewall for router, still not updated.
Notice to lovers?
Thanks,-Betty
The files listed here:
winsxs\manifests\x86_586397f8a20b10e1d2305203f6cdbd0e_31bf3856ad364e35_8.0.6001.22883_none_7102c1c166a0d1b4.manifest
winsxs\manifests\x86_92d1e2d52a3ba4a13f6b21e2147aebd8_31bf3856ad364e35_8.0.6001.18793_none_2a7a56bee77f2276.manifest
winsxs\manifests\x86_microsoft-Windows-IE-iecompat_31bf3856ad364e35_8.0.6001.22883_none_840ec88560132cdf.manifest
winsxs\manifests\x86_microsoft-Windows-IE-iecompat_31bf3856ad364e35_8.0.6001.18793_none_837a5bce46fda906.manifest
servicing\packages\Package_1_for_KB971930~31bf3856ad364e35~x86~~8.0.1.0.mum
servicing\packages\Package_for_KB971930_ie8_0~31bf3856ad364e35~x86~~8.0.1.0.mum
servicing\packages\Package_for_KB971930_ie8~31bf3856ad364e35~x86~~8.0.1.0.mum
servicing\packages\Package_for_KB971930~31bf3856ad364e35~x86~~8.0.1.0.mum
servicing\packages\Package_1_for_KB971930~31bf3856ad364e35~x86~~8.0.1.0.cat
servicing\packages\Package_for_KB971930_ie8_0~31bf3856ad364e35~x86~~8.0.1.0.cat
servicing\packages\Package_for_KB971930_ie8~31bf3856ad364e35~x86~~8.0.1.0.cat
servicing\packages\Package_for_KB971930~31bf3856ad364e35~x86~~8.0.1.0.catneed to be repaired and are corrupt. There are a few options for you at this stage.
the steps detailed here http://technet.microsoft.com/en-us/library/ee619779 (WS.10) .aspx are a little in depth but should help replacing the damaged/corrupt packages on your system. Who are mostly connected with IE.
You can also try to perform an in Place Upgrade to repair these packages. If you happen to have malicious software on the system then the steps above will not remove not just your system and you will need to perform the following steps to remove it.
-
Fireware failure and Gone Wireless update
Hey all,.
Summer faced with my Android phone for a few hours trying to configure the Wifi when I arrived to try to update the firmware. I got the correct version for my router (WRT54G v.6) but when I started immediately I got the message "upgrades are fail. Support cat sent the TFTP utility .exe program and who is also "a failure to connect to the server. I am at a loss.
I have since rebooted twice, reset my router a few times and reloaded the configuration of the backup and the LED on the button of Cisco systems, which has been orange since I bought it years ago, is now off. I have learned since that it may be white too depending on the ITS but its not lit up at all.
And I think that this could affect my abilities wireless from my phone is now able to connect to my system, but only to the router on my floor.
Can someone help me get things in working order?
Thank you very much.
Do not recharge the backup configuration if you try to update the firmware on your router.
Disable all firewalls on your computer. Unplug the modem router,
Just connect the computer to port 1 Ethernet to the router.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Cycle power to the router.
Open the router configuration page and go to the Administration tab on Firmware Update tab browse the firmware file that you have already downloaded and try to update on your router.
After upgrading the firmware of your router, it is recommended that you must reset the router and reconfigure.
-
monitor link link counts of failure using the delta values?
Hello
I am new to writing scripts of BB. Doesn't seem to be too hard, however.
I would like some advice to you guys how I should address my first script.
I want to monitor the number of links available in/proc/net/bonding/bond0 failure.
I have a script now, however, it is very simple, a little too simple. Now, let's get an alarm yellow if the number of failed to link is above 20, but it does not take into account the availability of the server.
What I want to do is to monitor how much County of failure of link exchange in 24 hours and based on this trigger one alarm.
The only possible way to reset the counter of link failure is either restart the server or the detachment of the binding. (ifenslave d bond0 eth0 & ifenslave bond0 eth0)
And since it is not possible to reset the counter of failure of link I think I need to work with values of delta. I don't know how to make the best way, and it is here, I would like your suggestions.
I have attached the script. You will notice that this script is built for Xymon.
There is no elegant way to do what you want to do.
You have to store the date and the number of failures in a file. Is the way I would do it (not tested, but should be close)
NOW = 'date + %s. "
YESTERDAY = ' expr $NOW - 86400'. "
# ADD THE LAST COUNT IN THE LOG FILE
Date + %s $NEWFAILS > / tmp/LINKCOUNTFAILS
RM-f/tmp/LINKTODAY
# NOW THE HARDEST PART - BROWSE THE LOG FILE AND STORE ANYTHING EARLIER THAN 24 HOURS IN A NEW LOG FILE
Cat/tmp/LINKCOUNTFAILS |
while reading line
do
set $line
DIFF = ' expr $NOW - $1 ".
If test '$DIFF' - lt '86400 '.
then
Echo "$1 $2" > / tmp/LINKTODAY
FI
fact
MV/tmp/LINKTODAY/tmp/LINKCOUNTFAILS # A NEW LOGFILE
the value "head - 1/tmp/LINKCOUNTFAILS"
OLDFAILS = $2
TOTFAILS = $NEWFAILS - $OLDFAILS
# DO THE NOTIFICATION THING
-
Failures of deployment with systems - SCCM precision 2012 R2 using MDT to deploy Win7
I managed to deploy several types of Latitudes and OptiPlexes using the driver cabins here to create packages of drivers. However, I can't deploy precision systems - in this case, T3600s and M4700s are both in check at the same place - pilot phase of injection. The smsts journal and the dism log indicate that the first pilot injected image offline successfully but fail when you try to inject the second pilot.
Copied from the logs:
smsts.log:
The content downloaded successfully to E:\_SMSTaskSequence\Packages\RD100068.
Added "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" to the Windows driver store.
Definition of % SystemRoot % 'E:\WINDOWS.
Get namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" of architecture "amd64".
List element added with the value of the key "1"
Writing of the configuration in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml information
Backup configuration information in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
Definition of temporary directory to "E:\_SMSTaskSequence\PkgMgrTemp".
Calling the Package manager to add the drivers to the driver offline store.
Command line for the .exe extension is '%1' % *.
"" Set command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
"" Run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
Process is completed with exit code 0
DISM pilots successfully added to the driver offline store.
Successfully added "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" in the Windows driver store.
Added "E:\_SMSTaskSequence\Packages\RD100068\0B458F91-49A9-41F0-948E-F69800676CA0" to the Windows driver store.
Definition of % SystemRoot % 'E:\WINDOWS.
Get namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" of architecture "amd64".
List element added with the value of the key "1"
Writing of the configuration in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml information
Backup configuration information in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
Definition of temporary directory to "E:\_SMSTaskSequence\PkgMgrTemp".
Calling the Package manager to add the drivers to the driver offline store.
Command line for the .exe extension is '%1' % *.
"" Set command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
"" Run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
Process is completed with exit code 2147500037
uExitCode == 0, HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,548)
DISM failed with return code - 2147467259
AddPnPDriverToStore (pszSource, sTargetSystemDrive, sTargetSystemRoot, wProcessorArchitecture), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,658)
AddPnPDriverToStore (pszSource, sTargetSystemDrive, sTargetSystemRoot, wProcessorArchitecture), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,658)
Cannot add the store driver to driver. Code 0x80004005
InstallDriver (iInstallParams-> sContentId, iInstallParams-> Usualssource, iInstallParams-> pBootCriticalInfo), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,557)
ReleaseSource() for E:\_SMSTaskSequence\Packages\RD100068.
number 1 for the source of reference before releasing E:\_SMSTaskSequence\Packages\RD100068
Resolved source E:\_SMSTaskSequence\Packages\RD100068 output
pDriverInstaller-> InstallDriverPackage (sPackageId, pBootCriticalInfo), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,380)
Cannot configure the driver. Code 0x80004005
Exit with return code 0x80004005
Process is completed with exit code 2147500037
!--------------------------------------------------------------------------------------------!
Cannot run action: apply Driver Package - T3600 precision.
Unspecified error (error: 80004005;) Source: Windows)DISM.log:
PID = 1624 TID = 1796 Scratch directory set to "E:\_SMSTaskSequence\PkgMgrTemp\". -CDISMManager::put_ScratchDir
PID = 1624 TID = 1796 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
PID = 1624 TID = 1796 successfully loaded the ImageSession to "X:\WINDOWS\System32\Dism" - CDISMManager::LoadLocalImageSession
DISM store provider: PID = 1624 TID = 1796 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 1624 TID = 1796 could not obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1624 TID = 1796 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 1624 TID is 1796 managed to create the session store and supplier of local image. -CDISMManager::CreateLocalImageSession
DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM. EXE:
DISM. EXE:<----- starting="" dism.exe="" session="" -----="">
DISM. EXE:
DISM. EXE: Host machine information: OS Version = 6.3.9600, operation architecture = x 86, number of CPUs = 4
DISM. EXE: Version of Dism.exe: 6.3.9600.16384
DISM. "" EXE: run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
DISM store provider: PID = 1624 TID = 1796 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\FolderProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\WimProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\VHDProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\ImagingProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\CompatProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: FolderManager
DISM. EXE: Attempting to add provider orders: WimManager
DISM. EXE: Successfully recorded commands to the provider: WimManager.
DISM. EXE: Attempting to add provider orders: VHDManager
DISM. EXE: Attempting to add provider orders: GenericImagingManager
DISM. EXE: Successfully recorded commands to the provider: GenericImagingManager.
DISM. EXE: Try to add the provider controls: Compatibility Manager
DISM. EXE: Successfully recorded orders for the supplier: Compatibility Manager.
DISM store provider: PID = 1624 TID = 1796 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
[1624] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [1624] [0xc142011c]
WIMGetMountedImageHandle: (2568) [1624] [0xc142011c]
DISM WIM provider: PID = 1624 TID = 1796 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM VHD provider: PID = 1624 TID = 1796 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM store provider: PID = 1624 TID = 1796 get provider VHDManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM VHD provider: PID = 1624 TID = 1796 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM imagery provider: PID = 1624 TID = 1796 VHDManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM store provider: PID = 1624 TID = 1796 get provider WimManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
[1624] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [1624] [0xc142011c]
WIMGetMountedImageHandle: (2568) [1624] [0xc142011c]
DISM WIM provider: PID = 1624 TID = 1796 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM imagery provider: PID = 1624 TID = 1796 WimManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM imagery provider: PID = 1624 TID = 1796 no provider Imaging CreateDismImage of decision-making support for this path - CGenericImagingManager::CreateDismImage
DISM Manager: PID = 1624 TID = 1796 physical path: E:\ - CDISMManager::CreateImageSession
DISM Manager: PID = 1624 TID = 1796 DISM copy of "E:\WINDOWS\SysWOW64\dism" - CDISMManager::CreateImageSessionFromLocation
DismHostLib: Directory of forwarders returned does not exist; do not change your environment dismhost.exe.
DISM Manager: PID = 1624 TID = 1796 successfully loaded the ImageSession to "E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5" - CDISMManager::LoadRemoteImageSession
DISM Image Session: PID is 1944 instantiating the provider store. -CDISMImageSession::get_ProviderStore
DISM store provider: PID = 1944 initialization of a store for the type of session IMAGE provider. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\OSProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\OSProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM operating system provider: PID = 1944 SystemPath failing to E:\ - CDISMOSServiceManager::Final_OnConnect
DISM operating system provider: PID = 1944 cannot copy msxml6.dll in the client's executable file in the dismhost.exe folder. Relying on the boxed version. -CDISMOSServiceManager::RunASICompatibilityShim
DISM operating system provider: PID = default Windows from 1944 to E:\Windows - CDISMOSServiceManager::Final_OnConnect folder
DISM store provider: PID = 1944 attempt to initialize the Session of the Image recorder. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\LogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\LogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\PEProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 failed to load provider: E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\PEProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x8007007e)
DISM store provider: PID = 1944 could not obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 1624 TID = 1796 Image session correctly charged to the temporary location: E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5 - CDISMManager::CreateImageSession
DISM store provider: PID = 1944 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM operating system provider: PID = SystemPath started in 1944 E:\ - CDISMOSServiceManager::SetSystemPath
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM. EXE: Target image information: Version = 6.1.7601.17592 OS, architecture of the Image = amd64
DISM store provider: PID = 1944 get the provider to a provider of image collection type store. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\CbsProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\CbsProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM Package Manager: PID = 1944 completed initialization of the CbsConUI Manager. -CCbsConUIHandler::Initialize
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
Transactions disabled in the registry, continuing without transaction support.
The core transactions are disabled, continuing without transaction support.
Cannot find a matching version for the servicing stack: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\ [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
Cannot find the directory stack service in the online store. [HRESULT = 0 X 80070490 - ERROR_NOT_FOUND]
To do in offline mode, the refuelling by using the version of the stack of: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
Load v6.1.7601.17592 Servicing Stack with Core: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
00000001@2014/2/12:00:13:37.512 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x71625d7d @0x7160205a @0x716d94f2 @0x716d96b9 @0x716b8e39)
Could not load SrClient DLL path: C:\windows\system32\srclient.dll. Continue without the system restore points.
00000002@2014/2/12:00:13:37.512 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0 x 71667183 @0 x 71664013 @0x716d94f2 @0x716d96b9 @0x716b8e39)
DISM Package Manager: PID = 1944 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
Loading offline registry hive: SOFTWARE in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE ' the path '\\?\E:\Windows\System32\config\SOFTWARE '.
Loading offline registry hive: SYSTEM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM "path"\\?\E:\Windows\System32\config\SYSTEM ".
Loading offline registry hive: security key in the registry "{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY ' the path '\\?\E:\Windows\System32\config\SECURITY '.
Loading offline registry hive: SAM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM ' the path '\\?\E:\Windows\System32\config\SAM '.
Loading offline registry hive: COMPONENTS in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS "of the path '\\?\E:\Windows\System32\config\COMPONENTS '.
Loading offline registry hive: by DEFAULT, the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT ' the path '\\?\E:\Windows\System32\config\DEFAULT '.
Loading offline registry hive: ntuser.dat in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat' path '\\?\E:\Users\default\ntuser.dat'.}
Loading offline registry hive: schema.dat, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Windows/system32/smi/store/Machine/schema.dat' path '\\?\E:\Windows\system32\smi\store\Machine\schema.dat'.}
Image offline is: writable
00000003 CSI 18012584 (0x0112d9a8) store initialized
Session: 1944_7162296 initialized by the client of DISM Package Manager provider.
DISM Package Manager: PID = 1944 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
DISM Package Manager: PID = 1944 Loaded battery for use online only for maintenance. -CDISMPackageManager::RefreshInstanceAndLock
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\MsiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\MsiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\IntlProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\IntlProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\DmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\DmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM operating system provider: PID = 1944 get the path of registry to the SOFTWARE hive located in E:\Windows\system32\config\SOFTWARE and determine if it is loaded. -CDISMOSServiceManager::DetermineBootDrive
DISM driver manager: PID = 1944 other newspapers for pilot operations can be found in the operating system the target to %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\UnattendProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\UnattendProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\SmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\SmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\TransmogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\TransmogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Try to add the provider controls: DISM Package Manager
DISM. EXE: Successfully recorded orders for the vendor: of DISM Package Manager.
DISM. EXE: Attempting to add provider orders: OSServices
DISM. EXE: Attempting to add provider orders: MsiManager
DISM. EXE: Successfully recorded commands to the provider: MsiManager.
DISM. EXE: Attempting to add provider orders: IntlManager
DISM. EXE: Successfully recorded commands to the provider: IntlManager.
DISM. EXE: Try to add the provider controls: DriverManager
DISM. EXE: Successfully recorded orders for the supplier: DriverManager.
DISM. EXE: Try to add the provider controls: DISM Unattend Manager
DISM. EXE: Successfully recorded orders for the supplier: DISM Unattend Manager.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: SmiManager
DISM. EXE: Attempting to add provider orders: Edition Manager
DISM Transmog provider: PID = 1944 session current image is [offline] - CTransmogManager::GetMode
DISM. EXE: Successfully recorded orders for the supplier: Edition Manager.
DISM store provider: PID = 1944 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Package Manager: PID = 1944node not found. Nothing to do. -CPackageManagerUnattendHandler::Apply
DISM store provider: PID = 1944 get provider SmiManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM Smi provider: PID = 1944 SMI provider selected "offlineServicing" maintenance pass. - CSmiWrapper::ApplySettings
00000004@2014/2/12:00:13:37.743 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x70dae316 @0x70dc0059 @0x70d9ae39 @0x70d9a9cc @0x70e81d6b)
DISM Smi provider: PID = 1944 list components defining the following substitutions:-CSmiWrapper::ApplySettings
DISM Smi provider: PID = overload parameters 1944 successfully applied to the component [Microsoft-Windows-PnpCustomizationsNonWinPE, Culture = neutral, Version = 6.1.7601.17514, PublicKeyToken = 31bf3856ad364e35, ProcessorArchitecture = amd64, versionScope = NonSxS] - CSmiWrapper:ApplySettings
DISM Smi provider: PID = 1944 end of list. -CSmiWrapper::ApplySettings
DISM store provider: PID = 1944 get provider DriverManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM driver manager: PID = 1944 ENTER InstallDriversOffline (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = path of the Windows directory offline parameter 1944: "E:\Windows" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 setting the system to reboot drive offline: "C:" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Offline Image has "PROCESSOR_ARCHITECTURE_AMD64" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 user has administrator privileges. (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = SOFTWARE Offline 1944 hive located in the: E:\Windows\system32\config\SOFTWARE (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 the key name of the hive loaded {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found "1" button (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 '1' treatment... (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 path = "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 without credentials provided (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = the SYSTEM offline 1944 hive located in the: E:\Windows\system32\config\SYSTEM (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 the key name of the hive loaded {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SYSTEM (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = Search for 1944 for drivers to 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5 '... (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 locate the INF files in "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead oz776x64.cat (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead oz776x64.inf (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead oz776x64.sys (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead release.dat (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 found 1 driver package (s) to "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5". (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' driver Package (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 installation driver 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' to the operating system currently offline... (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Imported 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' to the driver store offline to "E:\Windows\System32\DriverStore\FileRepository\oz776x64.inf_amd64_neutral_0b0c9ec4be8306ad\oz776x64.inf". (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 installed "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf" driver package! (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 devices marked with success to reinstall! (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = drivers Installed "1" of 1944. (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 RETURN InstallDriversOffline (0) (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944, trying to remove [{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE\Microsoft\Windows NT\CurrentVersion\UnattendSettings\PnpUnattend] registry key. -CDriverManager::Internal_DoUnattendCleanup
DISM driver manager: PID = 1944 successfully removed [{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE\Microsoft\Windows NT\CurrentVersion\UnattendSettings\PnpUnattend] registry key. -CDriverManager::Internal_DoUnattendCleanup
DISM Image Session: PID = 1944 disconnect the suppliers - CDISMImageSession::Final_OnDisconnect store
DISM store provider: PID = 1944 finalize (DISM Package Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/by DEFAULT, the client can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat, the customer can always need open.} [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Windows/system32/smi/store/Machine/schema.dat
DISM Package Manager: PID = base CBS finalization of 1944. -CDISMPackageManager::Finalize
DISM store provider: PID = 1944 cutting provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1944 finalize maintenance provider (MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 finalize maintenance provider (IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 found the provider PE. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1944 finalize maintenance provider (DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 cutting provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 finalize (DISM Unattend Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 cutting provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1944 finalize maintenance provider (SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 finalize (Edition Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 cutting provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 freeing the local reference to the OSServices. -CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: OSServices - CDISMProviderStore::Internal_DisconnectProvider
DISM operating system provider: PID = 1944 successfully unloaded all registry hives. -CDISMOSServiceManager::Final_OnDisconnect
DISM store provider: PID = 1944 freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
DISM. EXE: Session of the Image has been closed. Reboot required = no.
DISM. EXE:
DISM. EXE:<----- ending="" dism.exe="" session="" -----="">
DISM. EXE:
DISM store provider: PID = 1624 TID = 1796 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: WimManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = sectioning provider 1796: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
PID = 2016 TID = 1564 Scratch directory set to "E:\_SMSTaskSequence\PkgMgrTemp\". -CDISMManager::put_ScratchDir
PID = 2016 TID = 1564 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
PID = 2016 TID = 1564 correctly loaded the ImageSession to "X:\WINDOWS\System32\Dism" - CDISMManager::LoadLocalImageSession
DISM store provider: PID = 2016 TID = 1564 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 2016 = 1564 TID failed to obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 2016 TID = 1564 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 2016 TID is 1564 managed to create the session store and supplier of local image. -CDISMManager::CreateLocalImageSession
DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM. EXE:
DISM. EXE:<----- starting="" dism.exe="" session="" -----="">
DISM. EXE:
DISM. EXE: Host machine information: OS Version = 6.3.9600, operation architecture = x 86, number of CPUs = 4
DISM. EXE: Version of Dism.exe: 6.3.9600.16384
DISM. "" EXE: run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
DISM store provider: PID = 2016 TID = 1564 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\FolderProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\WimProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\VHDProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\ImagingProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\CompatProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: FolderManager
DISM. EXE: Attempting to add provider orders: WimManager
DISM. EXE: Successfully recorded commands to the provider: WimManager.
DISM. EXE: Attempting to add provider orders: VHDManager
DISM. EXE: Attempting to add provider orders: GenericImagingManager
DISM. EXE: Successfully recorded commands to the provider: GenericImagingManager.
DISM. EXE: Try to add the provider controls: Compatibility Manager
DISM. EXE: Successfully recorded orders for the supplier: Compatibility Manager.
DISM store provider: PID = 2016 TID = 1564 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
[2016] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [2016] [0xc142011c]
WIMGetMountedImageHandle: (2568) [2016] [0xc142011c]
DISM WIM provider: PID = 2016 TID = 1564 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM VHD provider: PID = 2016 TID = 1564 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM store provider: PID = 2016 TID = 1564 get provider VHDManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM VHD provider: PID = 2016 TID = 1564 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM imagery provider: PID = 2016 TID = 1564 VHDManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM store provider: PID = 2016 TID = 1564 get provider WimManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
[2016] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [2016] [0xc142011c]
WIMGetMountedImageHandle: (2568) [2016] [0xc142011c]
DISM WIM provider: PID = 2016 TID = 1564 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM imagery provider: PID = 2016 TID = 1564 WimManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM imagery provider: PID = 2016 TID = 1564 no provider Imaging CreateDismImage of decision-making support for this path - CGenericImagingManager::CreateDismImage
DISM Manager: PID = 2016 TID = physical path 1564: E:\ - CDISMManager::CreateImageSession
DISM Manager: PID = 2016 TID = 1564 DISM copy of "E:\WINDOWS\SysWOW64\dism" - CDISMManager::CreateImageSessionFromLocation
DismHostLib: Directory of forwarders returned does not exist; do not change your environment dismhost.exe.
DISM Manager: PID = 2016 TID = 1564 successfully loaded the ImageSession to "E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176" - CDISMManager::LoadRemoteImageSession
DISM Image Session: PID is 1608 instantiating the provider store. -CDISMImageSession::get_ProviderStore
DISM store provider: PID = 1608 initialization of a store for the type of session IMAGE provider. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\OSProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\OSProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM operating system provider: PID = 1608 SystemPath failing to E:\ - CDISMOSServiceManager::Final_OnConnect
DISM operating system provider: PID = 1608 cannot copy msxml6.dll in the client's executable file in the dismhost.exe folder. Relying on the boxed version. -CDISMOSServiceManager::RunASICompatibilityShim
DISM operating system provider: PID = default Windows from 1608 to E:\Windows - CDISMOSServiceManager::Final_OnConnect folder
DISM store provider: PID = 1608 attempt to initialize the Session of the Image recorder. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\LogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\LogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\PEProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\PEProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x8007007e)
DISM store provider: PID = 1608 failed to obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 2016 TID = 1564 Image session correctly charged to the temporary location: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176 - CDISMManager::CreateImageSession
DISM store provider: PID = 1608 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM operating system provider: PID = 1608 setting to E:\ - CDISMOSServiceManager::SetSystemPath SystemPath
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM. EXE: Target image information: Version = 6.1.7601.17592 OS, architecture of the Image = amd64
DISM store provider: PID = 1608 get the provider to a provider of image collection type store. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM Package Manager: PID = 1608 completed initialization of the CbsConUI Manager. -CCbsConUIHandler::Initialize
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
Transactions disabled in the registry, continuing without transaction support.
The core transactions are disabled, continuing without transaction support.
Cannot find a matching version for the servicing stack: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\ [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
Cannot find the directory stack service in the online store. [HRESULT = 0 X 80070490 - ERROR_NOT_FOUND]
To do in offline mode, the refuelling by using the version of the stack of: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
Load v6.1.7601.17592 Servicing Stack with Core: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
00000001@2014/2/12:00:13:40.733 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x71625d7d @0x7160205a @0x716d94f2 @0x716d96b9 @0x716b8e39)
Could not load SrClient DLL path: C:\windows\system32\srclient.dll. Continue without the system restore points.
00000002@2014/2/12:00:13:40.733 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0 x 71667183 @0 x 71664013 @0x716d94f2 @0x716d96b9 @0x716b8e39)
DISM Package Manager: PID = 1608 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
Loading offline registry hive: SOFTWARE in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE ' the path '\\?\E:\Windows\System32\config\SOFTWARE '.
Loading offline registry hive: SYSTEM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM "path"\\?\E:\Windows\System32\config\SYSTEM ".
Loading offline registry hive: security key in the registry "{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY ' the path '\\?\E:\Windows\System32\config\SECURITY '.
Loading offline registry hive: SAM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM ' the path '\\?\E:\Windows\System32\config\SAM '.
Loading offline registry hive: COMPONENTS in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS "of the path '\\?\E:\Windows\System32\config\COMPONENTS '.
Loading offline registry hive: by DEFAULT, the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT ' the path '\\?\E:\Windows\System32\config\DEFAULT '.
Failed to open the registry root: n/a, key: Microsoft\Windows NT\CurrentVersion\ProfileList. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
Cannot query for path in the user profiles directory. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
Could not load the default user profile registry hive. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/by DEFAULT, the client can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unable to load the store currently out of the startup directory: directory '\\?\E:\ '. "and windows: '\\?\E:\Windows\' [HRESULT = 0 x 80070002 - ERROR_FILE_NOT_FOUND]
Failed to initialize the store with the boot drive settings: E:\ and windows directory: E:\Windows [HRESULT = 0 x 80070002 - ERROR_FILE_NOT_FOUND]
DISM Package Manager: PID = 1608 failure initializing the session - CDISMPackageManager::RefreshInstanceAndLock (hr:0 x 80070002)
DISM Package Manager: PID = 1608 making internal initialization - CDISMPackageManager::Initialize(hr:0x80070002) ├echec
DISM store provider: PID = 1608, cannot call the method Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80070002)
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80070002)
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\MsiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\MsiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\IntlProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\IntlProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM operating system provider: PID = 1608 get the path of registry to the SOFTWARE hive located in E:\Windows\system32\config\SOFTWARE and determine if it is loaded. -CDISMOSServiceManager::DetermineBootDrive
DISM operating system provider: PID = 1608 could not open the Microsoft\Windows NT\CurrentVersion key. -CDISMOSServiceManager:DetermineBootDrive(hr:0x80070002)
DISM driver manager: PID = ├echec 1608 to get the boot from the operating system services provider drive. -CDriverManager:Initialize(hr:0x80070002)
DISM store provider: PID = 1608, cannot call the method Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80070002)
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80070002)
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\UnattendProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\UnattendProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\SmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\SmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608, impossible to retrieve the Instance of the provider. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
DISM store provider: PID = 1608, cannot call the Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80004005) method
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Attempting to add provider orders: OSServices
DISM. EXE: Attempting to add provider orders: MsiManager
DISM. EXE: Successfully recorded commands to the provider: MsiManager.
DISM. EXE: Attempting to add provider orders: IntlManager
DISM. EXE: Successfully recorded commands to the provider: IntlManager.
DISM. EXE: Try to add the provider controls: DISM Unattend Manager
DISM. EXE: Successfully recorded orders for the supplier: DISM Unattend Manager.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: SmiManager
DISM store provider: PID = 1608 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608, impossible to retrieve the Instance of the provider. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:390 - CUnattendManager::Apply (hr:0 x 80004005)
DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:654 - CUnattendManager::InternalExecuteCmdLine (hr:0 x 80004005)
DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:603 - CUnattendManager::ExecuteCmdLine (hr:0 x 80004005)
DISM. EXE: DISM Manager Unattend dealt with at the command line, but failed. HRESULT = 80004005
DISM Image Session: PID = 1608 disconnect the suppliers - CDISMImageSession::Final_OnDisconnect store
DISM store provider: PID = 1608 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1608 finalize maintenance provider (MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 finalize maintenance provider (IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 found the provider PE. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1608 finalize (DISM Unattend Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = sectioning vendor 1608: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1608 finalize maintenance provider (SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608, freeing the local reference to the OSServices. -CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: OSServices - CDISMProviderStore::Internal_DisconnectProvider
DISM operating system provider: PID = 1608 successfully unloaded all registry hives. -CDISMOSServiceManager::Final_OnDisconnect
DISM store provider: PID = 1608, freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
DISM. EXE: Session of the Image has been closed. Reboot required = no.
DISM. EXE:
DISM. EXE:<----- ending="" dism.exe="" session="" -----="">
DISM. EXE:
DISM store provider: PID = 2016 TID = 1564 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 2016 TID = 1564 provider sectioning: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: WimManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProviderIf information is needed, please let me know.
Thank you!
Not sure what was broken, but I built another image captured with MDT 2013 and details began to Imaging without problem.
The differences between the captured images were:
- inscription on the installation of JRE 32 bit
- change in the licensing model on the installation of Office (from MAK to KMS)
- software updates since last build - which would have been patches of January and February.
Still, I don't think that the differences above would have corrected the problem - but nevertheless, I'm now building systems of precision without problem.
-
does anyone know what causes this sudden failure to communicate with the DNS server?
My laptop suddenly stopped being able to connect to the internet. It has full signal and the modem works on a laptop another family (where I send you this). The error message "windows cannot communicate with the device or resource (primary DNS server), I followed the advice without success to date. What could cause do this all of a sudden?
You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of the problems of connections for all McAfee users.
See the communication from this "criticism" - McAfee
You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.
I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat
I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].
-
Virtual machine communication interface [FAILURE]
Hi, I try to reinstall vmwareworkstation 10 on my linux
-> VMware-Workstation-Full - 10.0.4 - 2249910.x86_64.bundle
Installation was successful, but I get this error prevents me to start a virtual machine.
Please help to
See you soon
jko
[root@JKOOEL ~] # /etc/init.d/vmware start
Starting VMware services:
Virtual machine monitor [OK]
Virtual machine communication interface [FAILURE]
VM communication interface socket family [OK]
Block the system files [OK]
Virtual Ethernet [OK]
[OK] VMware authentication daemon
[root@JKOOEL ~] # vmware - Installer - l
Product product name version
==================== ====================
VMware-workstation 10.0.4.2249910
[root@JKOOEL ~] # uname - a
Linux JKOOEL 3.8.13 - 68.el6uek.x86_64 #2 SMP kills Mar 10 15:26:36 PDT 2015 x86_64 x86_64 x86_64 GNU/Linux
[root@JKOOEL ~] # cat/etc/redhat-release
Release of Red Hat Enterprise Linux Server 6.6 (Santiago)
Fixed with this: VMWare does not start after kernel update
Thank you
jko
-
With DW CS3 since 2007. Now the AMT subsystem failure
Today when I started the application I got the message "failed to AMTSubsystem... ' DW will not start. Assistance telephone Adobe refused to talk to me and told me to go to CHAT. Cat said that they could help and they sent me here. I tried Solution 2 for Windows computers that says manually restart the FlexNet service, but it does not work. I can't deactviate the program because according to the instructions on the adobe support site, this must be done in the menus in the program and the program does not start. I'm so caught in a catch-22 of Adobe. I need to work on my site of employers. Where can I get real help?
I don't know if this will help, but if you want to try the solution in the last reply in this thread
-
Failure of vmnet after last update of openSUSE
Hi all
I just made an update of opensuse Factory tonight zypper mega - v13.2 goes live Monday so I thought that I would avoid the rush.
It was a big mistake that VMware Workstation is concerned because after update packages ~ 530 (new kernal etc) VMware Workstation can compile is no longer the vmnet module.
ERROR: Failure of vmnet. Cannot run the command build.
I've been running Vmware Workstation very well with zero problems on the factory for the past 3 weeks
Side note: I've just updated to VMware yesterday.
I am running: VMware-Workstation-Full - 10.0.4 - 2249910.x86_64.bundle
Everything worked fine for 24 hours before updating major openSUSE tonight (20141031)
# OS details follow
Linux Asus 3.17.1 - 1.g5c4d099 - desktop #1 SMP PREEMPT Sat Oct 18 23:36:23 UTC 2014 (5c4d099) x86_64 x86_64 x86_64 GNU/Linux
# List the versions of installed packages support...
kernel-source - 3.17.1 - 1.2.g5c4d099.noarch
kernel-desktop - 3.17.1 - 1.2.g5c4d099.x86_64
kernel-desktop-devel - 3.17.1 - 1.2.g5c4d099.x86_64
GCC - 4, 8 - 8.1.x86_64
Make - 4.0 - 4.4.x86_64
GCC-c++-4, 8 - 8.1.x86_64
Cat vmware-modconfig - 19171.log
... snip
2014 10-31 T 20: 25:32.487 + 01:00 | modconfig | I120: "/ usr/lib/vmware-installer/2.1.0/vmware-installer" came out with a status of 0.
2014 10-31 T 20: 25:32.487 + 01:00 | modconfig | I120: The setting for vmnet destination path to ' / lib/modules/3.17.1-1.g5c4d099-desktop/misc/vmnet.ko '.
2014 10-31 T 20: 25:32.487 + 01:00 | modconfig | I120: Extraction of the source vmnet "/ usr/lib/vmware/modules/source/vmnet.tar".
2014 10-31 T 20: 25:32.490 + 01:00 | modconfig | I120: Extract successfully the vmnet source.
2014 10-31 T 20: 25:32.490 + 01:00 | modconfig | I120: Module construction with the command ' / usr/bin/make - j6/tmp/modconfig-Kua8Vn/vmnet-only - C-automatic generation HEADER_DIR=/lib/modules/3.17.1-1.g5c4d099-desktop/build/include CC = / usr/bin/gcc IS_GCC_3 = no ".
2014 10-31 T 20: 25:33.649 + 01:00 | modconfig | W110: Vmnet failed. Cannot run the command build.
2014 10-31 T 20: 25:33.654 + 01:00 | modconfig | I120: We now stop. Ready to die!
See the attachment for details
Question: Is there available patches or a beta version of the next version of VMware Workstation?
Concerning
James
Hi all
Just a little note to say that I solved this problem by applying the attached patch (vmware-for - 3.17.patch.zip) that I found on this forum. Sorry, but I forgot on what post I found it.
Note: Make sure that you have installed on your system to fix GNU!
# The instructions to respect
Working directory new # make
RM - r/tmp/vmware
mkdir/tmp/vmware/source Pei & cd/tmp/vmware/source
#
# Copy files from source to the VMware
CP r/usr/lib/vmware/modules/source / *.
I'm in. / * .tar. tar - xf $i; fact
I'm in. / * .tar. make $ mv i.orginal $i; fact
#
# copy patch_to_603_r40_lc.zip* file to 3.17 kernel in/tmp/vmware/source /.
CP Pei your.path.goes.here/vmware-for-3.17.patch.zip.
# Decompressez./vmware-for-3.17.patch.zip
decompresser./VMware-for-3.17.patch.zip
#
# apply the patch
patch - p1<>
tar vmnet.tar - cf vmnet-only.
MV - vfi./vmnet.tar/usr/lib/vmware/modules/source /.
# recompile vmware modules using new patched
VMware-modconfig - console - install-all
#
# VMware Workstation 10.0.4 build-2249910 now works great on openSUSE 13.2/factory using a 3.17.1 kernel
Linux version 3.17.1 - 1.g5c4d099 - desktop (geeko@buildhost) (gcc 4.8.3 version 20140627 [CCG-4_8-branch revision 212064] (SUSE Linux)) #1 SMP PREEMPT Sat Oct 18 23:36:23 UTC 2014 (5c4d099)
Hope this helps someone
Concerning
James
-
The accessibility of the node node verification failure
Hello
I try to install Oracle 10.2.0.1 RAC in my vmware. I have configured public IP, private IP and VIP on both nodes and configured ssh too. I'm able to reach the nodes between them through ping and ssh with hostnames, but before you start the installation of my cluster, I checked the request of pre with ./runcluvfy.sh stage pre - crsinst - n, Rhel52.localdomain.com, rhel5.localdomain.com - verbose command and he raises me the below mentioned error. I have no idea why I get this error despite the right configuration of the OS.
[oracle@rhel5 cluvfy] stage pre - crsinst - Rhel52.localdomain.com, rhel5.localdomain.com n - verbose $./runcluvfy.sh
Conducting due diligence to install cluster services
Audit accessibility of node...
RHEL5.localdomain: rhel5.localdomain
Check: Accessibility of node of the node 'null '.
Accessible destination node?
------------------------------------ ------------------------
rhel5 no
Rhel52 no
Result: Failure of verification of accessibility node of the node 'null '.
ERROR:
Unable to reach one of the nodes.
Check cannot continue.
Kind regards
007
Local hosts are defined in the hosts file?
cat/etc/hosts
-
failure of db dual... abandonment of duplication of target
There is something wrong with my implementation and I would appreciate your comments to solve:
Start the day before in nomount:
Cat initKEMETSnew.ora
KEMETS.__db_cache_size = 402653184
KEMETS.__java_pool_size = 33554432
KEMETS.__large_pool_size = 16777216
KEMETS.__oracle_base='/U01/kemet'#ORACLE_BASE the value of the environment
KEMETS.__pga_aggregate_target = 738197504
KEMETS.__sga_target = 838860800
KEMETS.__shared_io_pool_size = 0
KEMETS.__shared_pool_size = 369098752
KEMETS.__streams_pool_size = 0
* ._trace_files_public = FALSE
*.audit_file_dest='/U01/Kemet/Admin/Kemet/adump '
* .audit_sys_operations = TRUE
* .audit_trail = 'DB', 'EXPANDED '.
* .cluster_database = FALSE
* full = '11.2.0.0.0'
#*.control_files='/u01/kemet/oradata/KEMET/control01.ctl','/u01/kemet/oradata/KEMET/control02.ctl"
* .db_block_size = 8192
*. "db_domain ='respecti.com"
*.db_file_name_convert='/U01/Kemet/oradata/Kemet/','/U01/Kemet/oradata/Kemet /'
* .db_name = "KEMET".
*.db_recovery_file_dest='/U01/Kemet/flash_recovery_area '
* .db_recovery_file_dest_size = 5218762752
* .db_unique_name = "KEMETS".
* .diagnostic_dest = ' / u01/kemet.
*. Dispatchers ='(Protocol=TCP) (SERVICE = KEMETXDB)"
* .fal_client = "KEMETS".
* .fal_server = "KEMET".
* .local_listener = "LISTENER_KEMETS".
* .log_archive_dest_1 = "location = db_unique_name valid_for = (all_logfiles, all_roles) use_db_recovery_file_dest =" KEMETS "
* .log_archive_dest_2 = "service = KEMET lgwr async valid_for =(online_logfiles,primary_role) db_unique_name = KEMET'
*.log_archive_format='KEMET%t_%s_%r.arc'
* .log_archive_max_processes = 30
*.log_file_name_convert='/U01/Kemet/oradata/Kemet/','/U01/Kemet/oradata/Kemet /'
* .memory_target = 1577058304
*. O7_DICTIONARY_ACCESSIBILITY = FALSE
* .open_cursors = 300
* runoff = 300
* .remote_login_passwordfile = "EXCLUSIVE."
* .sec_max_failed_login_attempts = 3
* Once = 472
* .standby_file_management = "AUTO".
* .undo_tablespace = "UNDOTBS1.
*. service_names = 'KEMETS.respecti.com, KEMETS'
* .log_archive_config = 'dg_config = (kemet, kemets)'
KEMET >
SQL > nnect / as sysdba
Connect to an instance is idle.
SQL > startup nomount pfile='/u01/kemet/11.2.0.3/KEMET/dbs/initKEMETSnew.ora';
ORACLE instance started.
Total System Global Area 1570009088 bytes
Bytes of size 2228704 fixed
1157631520 variable size bytes
402653184 of database buffers bytes
Redo buffers 7495680 bytes
SQL >
Check the primary connection and Standby SQLNet:
sqlplus sys/guidei@kemet as sysdba
SQL * more: Production release 11.2.0.3.0 the Sea 2 23:10:28 Jan 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL > exit
Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
KEMET > sqlplus sys/guidei@kemets as sysdba
SQL * more: Production release 11.2.0.3.0 the Sea 2 23:10:37 Jan 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL >
Winding began in the log file: dup_KEMETS.log
Recovery Manager11.2.0.3.0
RMAN > run {}
2 > allocate channel p1 type drive;
3 > allocate channel p2 type disk;
4 > allocate auxiliary channel stby type disk;
5 > duplicate target database for the eve of the active database
6 > spfile
7 > parameter_value_convert 'KEMET', 'KEMETS '.
8 > set db_unique_name = "KEMETS".
9 > set db_file_name_convert ='/ u01/oradata/kemet/EGYPT / ',' / u01/oradata/kemet/EGYPT /'
10 > set log_file_name_convert ='/ u01/oradata/kemet/EGYPT / ',' / u01/oradata/kemet/EGYPT /'
"11 > set control_files='/u01/kemet/oradata/KEMET/control02.ctl"
12 > set log_archive_max_processes = '30'
13 > set fal_client = "KEMETS."
14 > set fal_server = 'KEMET '.
15 > set standby_file_management = 'AUTO '.
"16 > set log_archive_config ='dg_config = (KEMET, KEMETS)"
"17 > set log_archive_dest_2 ='service = async valid_for = (online_logfile, primary_role) db_unique_name = KEMET kemet;
{18 >}
using the control file of the target instead of recovery catalog database
allocated channel: p1
channel p1: SID = 13 type of device = DISK
allocated channel: p2
channel p2: SID = 181 type device = DISK
allocated canal: stby
channel stby: SID = 357 type device = DISK
From 2 January 13 Db double
content of Script memory:
{
backup that copy reuse
TargetFile ' / u01/kemet/11.2.0.3/KEMET/dbs/orapwKEMET' auxiliary format
' / the u01/kemet/11.2.0.3/KEMET/dbs/orapwKEMETS targetfile
' / u01/kemet/11.2.0.3/KEMET/dbs/spfileKEMET.ora' auxiliary format
' / u01/kemet/11.2.0.3/KEMET/dbs/spfileKEMETS.ora';
clone of SQL 'alter system set spfile = "/u01/kemet/11.2.0.3/KEMET/dbs/spfileKEMETS.ora";
}
execution of Script memory
From backup 2 January 13
Backup finished on 2 January 13
SQL statement: alter system set spfile = "/u01/kemet/11.2.0.3/KEMET/dbs/spfileKEMETS.ora"
content of Script memory:
{
clone of SQL 'alter system set audit_file_dest =
Comment of "/ u01/kemet/admin/KEMETS/adump" =.
' ' scope = spfile;
clone of SQL 'alter system set dispatchers =
''(Protocol=TCP) (SERVICE = KEMETSXDB) "comment =
' ' scope = spfile;
clone of SQL 'alter system set local_listener =
"LISTENER_KEMETS" comment =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_dest_1 =
"location = db_unique_name valid_for = (all_logfiles, all_roles) use_db_recovery_file_dest = KEMETS" comment =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_format =
"KEMETS%t_%s_%r.arc" comment =
' ' scope = spfile;
clone of SQL 'alter system set service_name =
"KEMETS.respecti.com" comment, KEMET =.
' ' scope = spfile;
clone of SQL 'alter system set db_unique_name =
"KEMETS" comment =
' ' scope = spfile;
clone of SQL 'alter system set db_file_name_convert =
"/ u01/oradata/kemet/EGYPT /","/ u01/oradata/kemet/EGYPT /" comment =
' ' scope = spfile;
clone of SQL 'alter system set log_file_name_convert =
"/ u01/oradata/kemet/EGYPT /","/ u01/oradata/kemet/EGYPT /" comment =
' ' scope = spfile;
clone of SQL 'alter system set control_files =
"/U01/kemet/oradata/KEMET/control02.ctl" comment =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_max_processes =
30 comment =
' ' scope = spfile;
clone of SQL 'alter system set fal_client =
"KEMETS" comment =
' ' scope = spfile;
clone of SQL 'alter system set fal_server =
"KEMET" comment =
' ' scope = spfile;
clone of SQL 'alter system set standby_file_management =
Comment by "AUTO" =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_config =
Comment by "dg_config" (KEMET, KEMETS) =. =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_dest_2 =
"service = async valid_for = (online_logfile, primary_role) db_unique_name = KEMET kemet" comment =
' ' scope = spfile;
clone to stop immediately;
startup nomount clone;
}
execution of Script memory
SQL statement: alter system set audit_file_dest = comment "/ u01/kemet/admin/KEMETS/adump" = "' scope = spfile
SQL statement: alter system set dispatchers = ''(PROTOCOL=TCP) (SERVICE = KEMETSXDB) "comment ="' scope = spfile
SQL statement: alter system set local_listener = comment "LISTENER_KEMETS" = "' scope = spfile
SQL statement: alter system set log_archive_dest_1 = "location = db_unique_name valid_for = (all_logfiles, all_roles) use_db_recovery_file_dest = KEMETS" comment = "' scope = spfile
SQL statement: alter system set log_archive_format = comment "KEMETS%t_%s_%r.arc" = "' scope = spfile
SQL statement: alter system set service_name = comment "KEMETS.respecti.com, KEMET" = "' scope = spfile
SQL statement: alter system set db_unique_name = comment "KEMETS" = "' scope = spfile
SQL statement: alter system set db_file_name_convert = "/ u01/oradata/kemet/EGYPT /","/ u01/oradata/kemet/EGYPT /" comment = "' scope = spfile
SQL statement: alter system set log_file_name_convert = "/ u01/oradata/kemet/EGYPT /","/ u01/oradata/kemet/EGYPT /" comment = "' scope = spfile
SQL statement: alter system set control_files = comment "/u01/kemet/oradata/KEMET/control02.ctl" = "' scope = spfile
SQL statement: alter system set log_archive_max_processes = 30 comments = "' scope = spfile
SQL statement: alter system set fal_client = comment "KEMETS" = "' scope = spfile
SQL statement: alter system set fal_server = comment "KEMET" = "' scope = spfile
SQL statement: alter system set standby_file_management = comment "AUTO" = "' scope = spfile
SQL statement: alter system set log_archive_config = "dg_config = (KEMET, KEMETS)" comment = "' scope = spfile
SQL statement: alter system set log_archive_dest_2 = "service = async valid_for = (online_logfile, primary_role) db_unique_name = KEMET kemet" comment = "' scope = spfile
Instance Oracle to close
output channel: p1
output channel: p2
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 02/01/2013 19:57:35
RMAN-05501: abandonment of duplicate target database
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-04006: auxiliary database error: ORA-12514: TNS:listener is not currently of service requested in connect descriptor
RMAN > spool off log
After sleep to stop via the duplicate, it error. Does anyone have any suggestions?
tnsnames.ora on primary:
LISTENER_KEMET = (ADDRESS = (PROTOCOL = TCP (port = 2021))(HOST = linuxmac1.respecti.com))
KEMET, KEMET.respecti.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (port = 2021))(HOST = linuxmac1.respecti.com))
)
(CONNECT_DATA =
(SERVICE_NAME = KEMET.respecti.com)
#(SERVER = DEDICATED)
)
)
KEMETS, KEMETS.respecti.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 2021))(HOST = linuxmac2.respecti.com))
)
(CONNECT_DATA =
(SERVICE_NAME = KEMETS.respecti.com) (UR = A)
(SERVER = DEDICATED)
)
)
LISTENER_KEMET =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = linuxmac1.respecti.com)(port = 2021))
(ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC2021))
)
)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_KEMET = we
ADR_BASE_LISTENER_KEMET = / u01/kemet
SID_LIST_LISTENER_KEMET =
(sid_list =
(sid_desc =
(sid_name = PLSExtProc)
(ORACLE_HOME = u01/kemet/11.2.0.3/KEMET)
(= Extproc PROGRAM)
)
(SID_DESC =
(GLOBAL_DBNAME = KEMET.respecti.com)
(SID_NAME = KEMET)
(ORACLE_HOME = u01/kemet/11.2.0.3/KEMET)
)
)He looks at the shape:
rman target sys/guidei@kemet auxiliary sys/guidei@kemets Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jan 3 03:43:53 2013 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: KEMET (DBID=3765485650) connected to auxiliary database: KEMET (not mounted)You run the duplicate target database. You must run the database duplicate of the auxiliary database.
Run the auxiliary RMAN duplicate
Take a look at my notes:
http://www.Visi.com/~mseberg/standby_creation_from_active_database_using_rman.html
Best regards and good luck.
mseberg
Maybe you are looking for
-
Pavilion p6-2375eo: IDT High Definition Audio Codec
After a reinstalled windows 10 cleaning I have no device driver for IDT High Definition Audio Codec I can't get one from HP support not available for p6-2375eo I would like to know how and where I can get a device compatible windows 10 if possible ev
-
Need advice on the bluetooth driver and software download
* Please HELP *: you have just bought a bluemicro Nexus pro bluetooth v2.1 dongle. and Ive has damaged the disc it came with when I was opening the package. The disc says: Toshiba bluetooth driver and software bluetooth BT1.2/2/0/2.1.Anyone know if t
-
HP ENVY 15 Notebook PC G7Z03AV: Cursor jumps randomly
I start with the screen of the laptop closed and use an external monitor and a keyboard and mouse. After have started upward to a random interval later the cursor starts jumping around the screen and the function of the left button of the mouse is a
-
"The product ID you entered is not valid ' CD XP Pro OS.
It is a new installation on my laptop, using a genuine XP CD. Apparently (I'm told) the key was in the cello-wrap of the package, which has been scrapped. By following some instructions online, I dug down on the CD (using another computer), to /i386/
-
Vista has stopped turning the games run for a long time.
Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I