Failure of the authorization GANYMEDE + ASR1001

Similar Questions

• Authentication/authorization GANYMEDE + based on the subnet of the user

  Hi guys/girls

  We have number of speeds of production, which are configured with Ganymede cisco + and all their work very well. But now I have an obligation to implement SSH-ver2 across the network, consist of about 8000 cisco gear.

  I need to develop a proof of concept (POC), that activate SSH to gears production will not affect Ganymede + existing and authorized user authentication.

  In our lab cisco gear, it was already configured with Ganymede + production for authentication and authorization server. Now, I am allowed to test SSH on these machines in the lab but I without disrupting other users who use the same laboratory-gears.

  So, I want to activate SSH version 2 on these machines in lab-however, when the user from a certain specific subnet, this user must be authenticated and authorized by the LABORATORY Ganymede +, but no production Ganymede +, however please note that lab-gears, that I'm testing with also already configured for production Ganymede + server as well. These devices in the laboratory must be able to do authentication and authorization of two different Ganymede + server based on subnet of users that he or she coming.

  Is - this plan is feasible? I am looking for documentation to implement the test of this method, is not successful.

  Your comments will be appreciated and evaluated.

  Thank you

  Rizwan James

  Adely,

  It won't work, the Ganymede authentication begins once the ssh connection is established, the n (router or switch) will open a Ganymede connection and send the start indicator to the RADIUS server in which the 'getusername' message is sent from the RADIUS server to the device and the user terminal. You cannot create an acl in order to choose which Ganymede servers you can authenticate either. When it comes to authenticate users from a specific subnet to a server specific RADIUS which is not the design of Ganymede, when you configure multiple servers in a group is to ensure high availability such that when a Ganymede server goes down you have a secondary school continue with authentication requests from the.

  Here is an example of how the RADIUS authentication is performed.

  http://www.Cisco.com/en/us/Tech/tk59/technologies_tech_note09186a0080094e99.shtml#comp_traffic

  Thank you and I hope this helps.

  Tarik Admani
  * Please note the useful messages *.

• Specific shell - ACS command authorization / GANYMEDE + on 2900XL

  Hello all-

  I was struggling with a particular issue here. I am running ACS 3.2 and tries to implement secure access to my switch. I have 'students' of my University I want to leave running specific functions, i.e. change the vlan port and write in memory, etc.

  I created with success the piece of the authorization, and my test account can connect. I have successfully assigned a privilege level of 7 also, that gives me a look of default base rights. Accountants strives also, indicating connections and commands me to come home.

  I want to do is use ACS to allow a particular group of controls, so I can change if needed in one place (ACS) and I not touch + 400 devices. ACS says can be done, but it doesn't seem to work. I created a Shell command group and specified commands, no luck. Even if I change the 'unmatched orders' rocking 'allow' (which should allow all orders, right?) it does not yet allow all orders. I added the Shell command group for the group, of which students are members...

  My AAA commands are as follows:

  AAA new-model

  AAA of default login authentication group local Ganymede +.

  Group AAA authorization exec default local Ganymede +.

  AAA authorization commands by default 7 Group Ganymede +.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 7 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Any ideas? Any thoughts?

  Thank you!

  Michael

  QU.edu

  Michael,

  You perform permission to order order that exist with a privilege level of 7. By default, the configuration commands have a privilege to 15. There are two ways you can go about solving this problem. The first would be to authorization of installation for level 15 command. The second would be to change the privilege level of the commands that you want your students to be able to run level 15 at level 7. This can be done with the command of privilege. Here is a link that shows the use of the technology locally within the unit. http://www.Cisco.com/warp/public/480/Priv.html

  I don't know if the ACS can push the configuration of the device on a per user basis, so the first option may be your best bet. Be sure to allow access to all controls for yourself.

  Steve

• Authorization GANYMEDE - show arp

  I'm not a network administrator, but I get a number of devices that have the ability to manipulate traffic. There are times when these devices fail and will have to update the tables of arp cache and cam on our Cisco equipment. Due to this point of contact, I need the ability to verify the accuracy of these tables.

  Our team of Cisco uses GANYMEDE to manage access to our networking equipment. I had the ability to simply run the "show arp" and 'cam show' commands on a handful of devices, but have been informed that this is not possible because "show arp" is a privileged EXEC command.

  Unfortunately, I'm not in a position to be able to confirm or deny this, since I'm not familiar with Cisco or GANYMEDE device management. I was hoping someone in this forum could:

  (a) confirm that it is possible to allow individual orders without allowing all others

  (b) give some details on what to do in GANYMEDE to facilitate.

  All I need is to run these two commands - I don't need anything else. I suspect that our management team of GANYMEDE do simply not know how or do not want to implement this authorization. Your help to push would be appreciated.

  Thank you.

  "All I need is to run these two commands - I don't need anything else." I suspect that our management team of GANYMEDE do simply not know how or do not want to implement this authorization. Your help to push would be appreciated. »

  It's a very simple installation. Everything they need

  is the authorization of installation as follows:

  user = {test}

  Member = limited

  Login = the xxxxxxx

  name = "Scott Paul"

  }

  Group = {limited

  by default the service = deny

  cmd = {see the}

  allowed "arp. * »

  allowed "cam. * »

  deny. *

  }

  }

  With that, your account Ganymede may only

  run "show arp * ' and ' cam show."

  commands and nothing else.

  Easy right?

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Interesting solution of failure of the fans occasionally cold start?

  Interesting solution of failure of the fans occasionally cold start?

  Normally I do a reset of the SMC, sometimes it's the solution.

  When kick cooling fans as soon as I start my cold iMac, I just quickly swivel the iMac slowly from right to left and the cooling fans have stopped.

  Strange?

  All the answers?

  Note: I use an iMac 21 inch end 2013-2, 7 GHz Intel Core i5

  Thank you in advance for the answers.

  This sounds like a sensor loose or pinched wire.

  You may be able to see the problem of sensor or sensor wire with the diagnosis of Apple to test or a third party temp. followed by the application, but the best would be to book a service appointment at your local CENTRE.

  Apple Diagnostics using - Apple Support

  https://locate.Apple.com/

• failure of the SIM, why I this message all the time?

  failure of the SIM, why I this message all the time?

  This means that your SIM card is defective or otherwise expired

  Can you make and receive calls and texts?

  If so - go out the SIM card - wait about 45 seconds and re insert it back

  If not - contact your carrier for a new SIM card

  Remove or change the SIM card in your iPhone or iPad - Apple Support

• Qosmio X 70-B-10 t - failure of the graphics card

  Hello. I offen had failure that the graphics card driver hang up and recovered himself. But today, I got this failure to the course to watch live TV streams and it seemed to me that the laptop does not work correctly. I tried to restard and then I get this message: DRIVER_IRQL_NOT_LESS_OR_EQUAL (cmdhlp.sys). It must be the graphics card and I don't think it's a hd or RAM failure in this case.

  Any tips? Repair? New graphics card?

  Thank you!

  On this virtual path, it is not easy to say what can be the reason of this failure.
  Repair is always the last step. What you can do is to test the features using Notepad with "factory settings, without having to install additional software.

  What operating system do you use?
  Do you use the original display driver or some day?

• Failure of the audit on the iPhone, but works in iTunes

  Hello

  I had a strange problem:

  I can log on successfully to my desktop (Windows) by using my AppleID, can see my account balance and buy free apps.

  But I use the same AppleID on my iPhone 6Plus, it always shows: "failure of the audit, your Apple ID or password is incorrect."

  can anyone help?

  Thank you very much.

  Hi all

  After 2 hours of research and new attempts, I finally solved this problem.

  1. just to keep a new attempt on the iPhone, until the account is locked.

  (Note, only the account on the iPhone is locked, can I still use iTunes Windows and web to connect on the same Apple ID]

  2. then follow the instructions on the screen to unlock the account.

  (you will be asked 2 secret questions when the account is set up a few years ago)...

  Once the reset is OK, the same account is included to connect the iPhone and buy apps.  (Yes..!)

  Hope this will be useful.

  kpang1

• Pavilion dv6t 7000: failure of the BIOS (Caps lock flashes twice a secone)

  My laptop model number is Pavilion dv6t 7000. In recent days, he had a problem. When I turned off my laptop and put it off, the next day I find that is not starting. A black screen, caps lock shift is blicking twice and f12 key is red (WIFI). Nothigs happen. Then, I searched and came to know that it is the failure of the bios. Then I tried some way and nothings worked. ATLAST when I remove the cmos battery it set again after 2 or 1 minute its starts fine. Then againg I turn off the computer and its power day following again the same problem. I was to solve this problem by removing cmos battery and put it again for 4 or 5 days. But today this tip does not work. I tried so many method like (Windows key + B), (byholding down the power button for 1 minute), (Flash UEFI) etc. to solve the problem of failure of the bios, nothing worked at all. What is the problem?  Is this really a failure of the bios? How can solve this problem? What is a dangerous problem? There the chances that my laptop is completely exhausted?

  Hello
  beep codes or led lights will Flash at the start of the system may indicate a hardware fault or BIOS you say you have tried all the troubleshooting steps
  
  I would like to run the hardware check to make sure it's all working please follow the guide below for instructions and report:
  
  http://support.HP.com/us-en/document/c03467259#AbT1
  
  Tests using UEFI diagnostics and run the quick test
  
  Thank you
  James

• Failure of the Time machine backup could not save "My Passport"

  When I try to do a backup on my Passport using Time Machine, he used to work over the years, and now it is the message I get:

  Failure of the Time machine backup could not save "My Passport"

  
  

  Does anyone has an idea to help me with this problem?

  
  

  (Sorry for my English but I speak French in Switzerland...)
  

  Have you tried to run utilities disk to check/repair the external hard drive? Here is something you can try.  http://pondini.org/TM/A4.html

• Failure using the charger VxD (Code 19).

  Norton 360 detects the unusable device;

  Failure using the VxD (Code 19) charger

  F:\ G:\, H:\ and I:\

  Type Devives Protable

  Generic Manf

  Location: On UMBus Emunerator

  Device status Windows cannot start the device hardware information (in the registry)

  is incomplete or damaged (Code 19)

  What is - this and how I can fix it.

  My computer is a series of beeps 3 x 3 about 30-40 seconds after the connection.

  Thanks for any advice.    John

  Hi jcjohn

  Does not offer much help, but I picked this up in the Norton Community Forum

  http://community.Norton.com/forums/Code-19-failure-loading-using-VxD-loader

  With a possible solution from Microsoft:

  http://support.Microsoft.com/kb/314060

  If the problem is not resolved, try the Norton Forum:

  http://community.Norton.com/forums

• W510: How do I access my data from a failed hard drive after the failure of the motherboard

  I made a mistake and has paid for major .

  This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

  Symptoms: It began at the start, kept a beep, sometime just close and will start.

  In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

  -Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

  -buy an equivalent model laptop and put the HARD drive in there

  -by an external SATA hard drive enclosure and mount it via USB on another computer

  I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

  I'll appreciate any suggestions for accessing my data.

  Best regards!

  All,

  Thanks for the suggestions.

  I was able to recover my computer and all data on it.

  Just to describe what I have done, here are the details.

  Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

  Thanks again,

  brent86

• I want to offer internet access to my client area but I am unable to give it the authorization of domain server? Please help me as soon as possible.

  I want to offer internet access to my client area but I am unable to give it the authorization of domain server? Please help me as soon as possible.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/