Failure of the Studio 540 USB after the House from lightning.
So, I am a computer Tech and this is a first for me. My client calls me and tells me that she has a problem with his desktop computer. I show up at his house and the first thing I see is a huge burn on the side of his house. (I think thisll be fun...) Crush.) The only damage what anyone in his house, it's that none of its USB ports will transfer data. There is power on each front and rear of the tower. and there is no other port damaged or defective. (just USB) Long story short the Tower belongs to me now and she has a new XPS desktop. Does anyone have any idea if I can repair the motherboard? Also, I can't access the bios or boot from a USB key, so this isn't a windows problem. And of course, this tower has no no ps/2 ports... so no ps/2 keyboard... Any help is appreciated. for now its just charge my phones and mp3 players. I intend to install a pci or pci-e USB expansion card.
Try to clear the BIOS first:
- Power/disconnect
- Power button press / hold for about 15 seconds
- Open the case and remove the motherboard battery
- Power button press / hold for about 30 seconds
- Reinstall the battery and see if it USB works when you start
If this is not the case, consider connecting a USB hub with its own external power brick. Connect the brick on the wall and the hub to a rear USB port. Connect the mouse, the keyboard through the hub and see if it works.
Tags: Dell Desktop
Similar Questions
-
Photoshop CS6 reinstall after failure of the upgrade from Win - 7 to Win - 10
I had a Photoshop CS6 (updated for CS4) on a Win7 desktop. During the upgrade to Win7 for Win10 all failed and was lost. EU to clean reinstall Win7, upgraded to Win10. Downloaded Photoshop_CS6_13_0_1_3_upd.zip.
Execution of AdobePatchInstaller.exe asks for Adobe Application Manager.
By clicking on "Upload a new copy" fails replied "sorry, the page is not available.
How can I install the CS6? (trial upgrade?).
How can I disable the installation failed and lost and reactivate it?
vaclavc50111958
To disable a lost activation, you must contact the Adobe Support via chat and ask them to reset your activations.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
Serial number and activation support (non - CC) chat
-
Failure of the update from Microsoft
I have Win - XP Prof. with Service Pack 3 installed.
In Microsoft Update, after download, the installation of "Office 2003 update for Microsoft Office Outlook 2003 Junk e-mail filter (KB2466074)" fails with error Code: 0x51F. What could be the reason?
There are 5 other updates that fail to install.
Hello
I suggest you follow the steps mentioned in the articles below.
You receive an "Installation error: file not found" or "Error 0x51F" error message when you try to update Office 2003 programs from the Office Update Web site or the Office Download Center
http://support.Microsoft.com/kb/875556
How to troubleshoot incidents to update your installation of Office on the Office Update Web site
http://support.Microsoft.com/kb/304498
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
NAT-XLATE-FAILURE on the VPN from Site to site connection.
I had configured a VPN of Site to new site on my network, once I created Tunnel appears, but there is no traffic when I made trace packet its gave me error "(NAT-XLATE-FAILED), NAT has failed."
Here is the configuration runing.
ASA 9.1 Version 2
!
ciscoasa hostname
activate 2KFQnbNIdI.2KYOU encrypted password
names of
IP local pool kecdr 10.100.1.1 - 10.100.1.50 mask 255.255.255.0
local pool KECVPN 10.2.1.200 - 10.2.1.225 255.255.255.0 IP mask
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 168.187.199.66 255.255.255.252
!
interface GigabitEthernet0/1
nameif inside
security-level 100
10.2.1.1 IP address 255.255.255.0
!
interface GigabitEthernet0/2
nameif DMZ
security-level 50
IP 10.60.1.2 255.255.255.0
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
management of the DNS domain-lookup service
DNS server-group DefaultDNS
Name-Server 8.8.8.8
permit same-security-traffic intra-interface
network of the NETWORK_OBJ_10.100.1.0_26 object
255.255.255.192 subnet 10.100.1.0
network of the NETWORK_OBJ_10.2.1.192_26 object
255.255.255.192 subnet 10.2.1.192
network of the NETWORK_OBJ_10.13.0.0 object
Home 10.13.0.0
network of the NETWORK_OBJ_10.2.0.0 object
host 10.2.0.0
network of the NETWORK_OBJ_10.3.0.0 object
Home 10.3.0.0
the DM_INLINE_NETWORK_1 object-group network
host object-network 10.2.0.0
object-network 10.60.1.0 255.255.255.0
inside_access_in list extended access permitted ip any4 any4
inside_access_in list of allowed ip extended access all 10.60.1.0 255.255.255.0
outside_access_in list extended access permitted ip any4 any4
allow global_access to access extensive ip list a whole
DMZ_access_in of access allowed any ip an extended list
DMZ_access_in list extended access permit ip any interface inside
outside_cryptomap list extended access allowed host ip DM_INLINE_NETWORK_1 10.3.0.0 object-group
permit access ip host 10.2.0.0 extended list outside_cryptomap_1 10.11.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
MTU 1500 DMZ
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow any response echo inside
ICMP allow any echo inside
ICMP allow all DMZ
ICMP allow any echo DMZ
ICMP allow any response to echo DMZ
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.2.1.192_26 NETWORK_OBJ_10.2.1.192_26 non-proxy-arp-search to itinerary
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.100.1.0_26 NETWORK_OBJ_10.100.1.0_26 non-proxy-arp-search to itinerary
NAT (inside DMZ) static source a whole
NAT (inside, outside) static source NETWORK_OBJ_10.2.0.0 NETWORK_OBJ_10.2.0.0 NETWORK_OBJ_10.13.0.0 NETWORK_OBJ_10.13.0.0 non-proxy-arp-search of route static destination
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.3.0.0 NETWORK_OBJ_10.3.0.0 non-proxy-arp-search of route static destination
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Access-group DMZ_access_in in DMZ interface
Access-Group global global_access
Route outside 0.0.0.0 0.0.0.0 168.187.199.65 1
Route DMZ 10.1.0.0 255.255.0.0 10.60.1.1 1
Route DMZ 10.2.0.0 255.255.0.0 10.60.1.1 1
Route DMZ 10.60.0.0 255.255.0.0 10.60.1.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 management
http 10.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs Group1
peer set card crypto outside_map 1 196.219.202.197
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 2 match address outside_cryptomap_1
peer set card crypto outside_map 2 185.52.118.67
card crypto outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 0.0.0.0 0.0.0.0 outdoors
Telnet 10.0.0.0 255.0.0.0 inside
Telnet 10.2.0.0 255.255.0.0 inside
Telnet 10.1.0.0 255.255.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 10.0.0.0 255.0.0.0 inside
SSH 10.2.0.0 255.255.0.0 inside
SSH 10.1.0.0 255.255.0.0 inside
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
internal GroupPolicy_185.52.118.67 group strategy
attributes of Group Policy GroupPolicy_185.52.118.67
Ikev1 VPN-tunnel-Protocol
internal GroupPolicy_196.219.202.197 group strategy
attributes of Group Policy GroupPolicy_196.219.202.197
Ikev1 VPN-tunnel-Protocol
internal kecdr group policy
attributes of the strategy of group kecdr
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
internal KECCISCO group policy
KECCISCO group policy attributes
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
internal KECVPN group policy
KECVPN group policy attributes
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
cisco 3USUcOPFUiMCO4Jk encrypted password username
username privilege 15 encrypted password 3ofqMXhysxFRHhoQ keccisco
type tunnel-group kecdr remote access
tunnel-group kecdr General-attributes
address kecdr pool
Group Policy - by default-kecdr
kecdr group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group KECVPN remote access
attributes global-tunnel-group KECVPN
address kecdr pool
Group Policy - by default-KECVPN
IPSec-attributes tunnel-group KECVPN
IKEv1 pre-shared-key *.
type tunnel-group KECCISCO remote access
attributes global-tunnel-group KECCISCO
address KECVPN pool
Group Policy - by default-KECCISCO
IPSec-attributes tunnel-group KECCISCO
IKEv1 pre-shared-key *.
tunnel-group 196.219.202.197 type ipsec-l2l
tunnel-group 196.219.202.197 General-attributes
Group - default policy - GroupPolicy_196.219.202.197
IPSec-attributes tunnel-group 196.219.202.197
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
tunnel-group 185.52.118.67 type ipsec-l2l
tunnel-group 185.52.118.67 General-attributes
Group - default policy - GroupPolicy_185.52.118.67
IPSec-attributes tunnel-group 185.52.118.67
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
HPM topN enable
Cryptochecksum:8156993fef96da73dedfaacd7a14e767
: endMy local IP address: 10.2.X.X
My remote IP address: 10.3.X.X
Can anyone support me for the error
Hello
Your self after dynamic PAT takes the static NAT...
NAT source auto after (indoor, outdoor) dynamic one interface
You must reconfigure you NAT or PAT rule defined in your firewall.
no nat source auto after (indoor, outdoor) dynamic one interface
network local-lan-pat1 object
10.2.0.0 subnet 255.255.255.0
NAT dynamic interface (indoor, outdoor)
!
network local-lan-pat2 object
10.60.1.0 subnet 255.255.255.0
NAT dynamic interface (indoor, outdoor)
!
no nat source (indoor, outdoor) public static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.3.0.0 NETWORK_OBJ_10.3.0.0 non-proxy-arp-search of route static destination
!outside_cryptomap to access extended list ip 10.2.0.0 allow 255.255.255.0 host 10.3.0.0 255.255.255.0
No list of extended outside_cryptomap access not allowed host ip DM_INLINE_NETWORK_1 10.3.0.0 object-group
!
We hope that you do this between subnets... not for the host at the other end.
Concerning
Knockaert
-
failure of the upgrade from 9i to 10 g
Hi Hussein;
I try to do the upgrade to 9.2.0.8 10.2.0.4... In steps dbua upgrade hang % 87 and I stopped upgrade process. Now we come back backup and then try to pass again.
My question is
1. I created the folder under xxx/visdb/10.2.0 and I installed the database (software only), companion and 10.2.0.4 path in this directory. When I've restart process should I reinstall and try again to install the database, companion and patch? Or just I have to install the patch?
2. is there a way to start dbua 87%? or should I start from the beginning
Thank you very muchHello
1. I created the folder under xxx/visdb/10.2.0 and I installed the database (software only), companion and 10.2.0.4 path in this directory. When I've restart process should I reinstall and try again to install the database, companion and patch? Or just I have to install the patch?
Do not reinstall, just restore the backup files.
2. is there a way to start dbua 87%? or should I start from the beginning
Start from the beginning.
Kind regards
Hussein -
I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.
I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.
There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.
Hey AmnonMikeCohen,
Thank you for being a part of the communities of Apple Support.
I understand that your Mac is not start properly after the power went out. Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:
Reset the management system (SCM) controller on your Mac.
How to reset the NVRAM on your Mac.
See you soon.
-
USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP
Hello
Model: Toshiba L30-105 PSL33E-02S02HFR.
USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.Thanks for any help,
Camellia,
Have you installed Win XP all service packs?
SP2 provides some patches on the USB feature.You definitely need to update the Win XP OS
-
W510: How do I access my data from a failed hard drive after the failure of the motherboard
I made a mistake and has paid for major .
This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.
Symptoms: It began at the start, kept a beep, sometime just close and will start.
In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:
-Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what
-buy an equivalent model laptop and put the HARD drive in there
-by an external SATA hard drive enclosure and mount it via USB on another computer
I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.
I'll appreciate any suggestions for accessing my data.
Best regards!
All,
Thanks for the suggestions.
I was able to recover my computer and all data on it.
Just to describe what I have done, here are the details.
Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.
Thanks again,
brent86
-
OP: Action Center... PC problem: 1 important message
After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?
Hello Irfan,
Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate. Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me. On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers. Not the only one, I have is the product key which is one 25-alpha-numeric. I tried to enter only and does not pass. This is why I say that I can pay for help since I did not ' have the product ID. Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think? If you can get back on track, I would be very grateful and thank you once again to be a big help!
wandrinstar
Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.
Keep up the good work,
wandrinstar
-
I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.
Hi Bobby Collas,.You must have a copy of the installation CD without which you can not re - install the OS again.If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same. -
I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.
Hello
I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.
-
try to restore information lost after the failure of the internet
try to restore information lost after the failure of the internet
Hey buceriasbev
try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
and read this too
http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-Internet-Explorer-home-page
Walter, the time zone traveller
-
failure of the system after the installation of windows 7 upgrade advisor
original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete
My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Advice on upgrading the video card in Studio 540
I just picked up a used Studio 540 and was looking to upgrade the video card without having to buy a new power supply. I do a few games. Anyone would be able to advise a good card that works in this machine? My budget is $ 150. I was leaning towards a Sapphire Radeon 7750 brand or possibly a 7770 like this:
http://www.Newegg.com/product/product.aspx?item=N82E16814202011
The specifications are the following:
Studio 540
Core 2 Quad Q9400 clocked at 2.6 GHz
8 GB memory
Hard drive 500 GB
power SUPPLY 350 watt PSU
1680 x 1050 resolutionThanks in advance.
You always have a pretty decent system with Quad CPU and 8 GB of memory. I love the Sapphire of HD7770 you have connected. As long as you have the PCIe 6-pin power cable on your 350w unit, you should be fine. It's going to be the best that you can get without taking account of an upgrade of the power supply. I say go ahead because the 7750 HD is not that much less and the 7770 HD will be best for the games.
-
Installing VCenter Server 5.0, I have following error do not know where to go
-2008 R2 Server
Installation failure of the error to launch the redistirbutable of runtimes Installer Microsoft Visual Studio 2005 SP1. Could not be located.
Please help regards
GoldTipu.
When you get this message - do not respond.
Instead use explore and find the path where the Setup program has extracted from its files - may be that the file is there too - he would be appointed as vcredist - whatever.exe
Or just download and install it yourself.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5638You may need the 32-bit and 64-bit runtimes.
Have you checked the download? -C' may be corrupt? - or do you use parameters obscure username with white or non-English characters?
Maybe you are looking for
-
Hi, I bought a computer hp laptop on 31.10.13. The status of the guarantee indicated on the web is at 25.11.14 while the coverage must extend up to 31.10.16 two years extended warranty online was given in the offer to purchase. I am already registere
-
cDAQ or cRIO or RT + cRIO?
Hello community, I write software that controls a process can take up to 8-10 hours. This is a high current application so the stability of the system is a fundmental requirement. I need to choose the right hardware for the application and I would go
-
Count when whole Exchange?
Hello Hope somone can help me with this. I have a position of analog speed sensor, which generates a voltage between 0 and 10 v according to the machine is chosen. (I'm simulating the input voltage to the VI attached using a digital command, and leve
-
File sharing via router computer LinksysWirles laptop pc problem.
Heya! I have a problem, try to esteblish sharing files between laptop (connection wirles, WinXpHome) and the office (cable, WinXpPro). Use the Network Setup Wizard I have setuped computers for sharing. I can access shared folders on the desktop from
-
Cannot print Web pages, but can print documents
setting up a new printer... wireless deskijet hp 3050 has... print fine documents/photos of the laptop and even my iPad... but when I try to print a Web page, it comes out completely empty... Well, with the exception of headers and feet?