Failure of the update from Microsoft

I have Win - XP Prof. with Service Pack 3 installed.

In Microsoft Update, after download, the installation of "Office 2003 update for Microsoft Office Outlook 2003 Junk e-mail filter (KB2466074)" fails with error Code: 0x51F. What could be the reason?

There are 5 other updates that fail to install.

Hello

I suggest you follow the steps mentioned in the articles below.

You receive an "Installation error: file not found" or "Error 0x51F" error message when you try to update Office 2003 programs from the Office Update Web site or the Office Download Center

http://support.Microsoft.com/kb/875556

How to troubleshoot incidents to update your installation of Office on the Office Update Web site

http://support.Microsoft.com/kb/304498

Thanks and regards.

Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Change the path to the updates from microsoft updates vs. windows

    Fully updated, xp pro, ie8

    When you click Start, all programs, windows update, go to the updates of microsoft with the compatibility view

    which connection online for microsoft updates gets updates microsoft without compatibility view

    can I change the path for my start, all programs, windows updates to be updated from microsoft without view compatibiliy?

    Edit: have reinstalled os with a sp3 slipstreamed cd.

    Edit2: no sites are not listed in my compatibility view settings.

    There is no need to uninstall/reinstall MSE.

    1. open IE (only!) to Microsoft Update . Click change settings in the left pane. Scroll to the bottom of the page. To stop using Microsoft Update. Disable the Microsoft Update software and let me use Windows Update only (check).

    1B. Reboot for good measure.

    2. your shortcut on the start menu should now be updated to Windows . [1] use it (not the Tools menu pull-down option) to go to http://update.microsoft.com/windowsupdate. Assuming that it does NOT open in compatibility mode...

    3. "Flip" your source of default update appropriate Microsoft update by clicking on the option / link on the main page of Windows Update (IIRC).

    3B. reboot for good measure & test to see if the Microsoft Update shortcut on your Start menu will however open IE8 in compatibility view.

    PS: I don't have a WinXP box handy to test myself, but the last time I used the Microsoft Update shortcut on one of my client computers, it has not opened in compatibility view. As far as I know, MS may have changed something since then so YMMV.

    =============================================================
    [1] If you persevere with Windows Update as a source of update by default, MSE will always be 'auto-update' [even thought that Windows Update will offer more optional updates Defs] but will offer no updates to the ESM (e.g. new versions MSE) program or updates for MS Office, Silverlight, or Skype .

  • Computer screen problem after you download the update from Microsoft Windows

    My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.

    Later, I noticed the screen problem. Can someone help me please on this issue?

    Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?

  • Cannot download the update from microsoft > update security for windows media encoding for windows xp and windows server 2003 kb2447961

    I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.

    Hello

    1. don't you encounter any error message during the installation of this update?
    2 is this problem limited to this particular update?
     
    I ask to download the update manually and then install it.
    Here is the download link:
    A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
    http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Loss of FN - key after the installation of the updates from Microsoft on L500 security

    I am using a satellite L500-19U

    After the installation of Microsoft security updates the FN lost their function except the brightness keys + /-function.
    also the function keys that appear on the upper border of monitor by pressing the FN key appear after the security packages have been installed.
    I solved the problem by removing the update through the function of W7 (Wiederherstellungs punkt) back.

    The following security packages are selected to be installed:
    Update security for Windows 7 for x 64-based systems (KB978601)
    Update security for Windows 7 for x 64-based systems (KB979309)
    Update security for Windows 7 for x 64-based systems (KB979683)
    Update security for Windows 7 for x 64-based systems (KB980232)
    Update security for Windows 7 for x 64-based systems (KB981332)
    Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool)

    Which of them are unsuspicios, which must be postponed, the updates are necessary after installation, updates?

    Post edited by: JoJo58

    Hello

    If you read about these update on the Microsoft website: (not of them should affect the FN keys)

    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=998164b7-4B8C-468B-8d39-f242633c8838

    I checked the history of updates on my computer and all of them are installed with the exception of Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool). Everything works correctly, try to remove this update.

  • Cannot install the update from Microsoft SEcurity Essentials KB2691905 get error the component you are trying to use is on a resource unavailable network

    JOriginal title: can't locate epi.msi

    When you try to install the update of security essentials KB2691905 I get an error message saying "the component you are trying to use is on a network unavailable resource."  «.. . or enter a different path to the folder containing the installation package 'epi.msi' "

    Hello

    Method 1: Install the latest version of the installer

    See the following site:

    Windows install 4.5 Redistributable

    http://www.microsoft.com/en-us/download/details.aspx?id=8483.

     

    Method 2: Clean boot

    See the following site:

    http://support.microsoft.com/kb/310353.

    Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

  • Local only access immediately after the updates from Microsoft installed.

    I have a Dell 531 s running Windows Vista Home Basic Edition.  It has been working fine for years with a USB wireless adapter.  The other night I left it on and Microsoft installed some updates and restarted my computer for me.  Since then, I can't get my router LOCAL ONLY access.  I can't access the router or do something that is no longer communicates properly with him.  I looked and I tried to uninstall IASATP 3 equipment, put it back and restart.  Still only ACCESS LOCALLY on this computer, so that all other devices Wi-wired and the same mental health of router to function normally.  Any suggestions?

    Hello

    -Who were the updates installed on your computer before this problem?
     
    Method 1: I suggest you to see link below and check.
    For reference:
     
    Method 2:
    Follow the steps mentioned below and check if the problem persists.
    (a) enter in the network and sharing Center.
    (b) right click on the Network icon and select view status of.
    (c) click on Properties.
    (d) click on Configure , then select the driver tab.
    (e) click update the driver.
    For reference:
     
    Hope this information helps.
  • I want to know if I should add all the updates from Microsoft that I receive.

    The following message appeared when I entered th PA State unemploment should I allow it to run?  ? This website wants to run the following ad-on: 'MSXML5.0' from 'Microsoft Corporation': If you trust the website and the add-on and want to allow it to run, click here

    It comes with Vista, upgrade install and activate Forum.

    http://en.Wikipedia.org/wiki/MSXML

    You must be able to understand what each module is offered to you before you allow it to run.

    It is part of the security process in Windows to inform you on this module and auto download of it.

    If you do not need to access this Web site, do not install it.

    See you soon. Mick Murphy - Microsoft partner

  • 0x80072EFF when you perform the update from Microsoft for windows XP PRO. Microsoft Windows would load--not Internet (there!)

    I kept getting error 0X80072EFF whenever I run Microsoft Update for my Dell latitude XP pro. Windows Update would not, saying no connection, although it is. I tried some of the solutions proposed, including the installation and execution of Malwaebytes (836941), Trend Micro PRO sets a trojan virus. I also tried running ' services.msc in "-I did as suggested, but there is NO update of windows, or microsoft update services listed; the automatic update, the background intelligent transfer service and the support services are all enabled. I also download and run Microsoft FIX IT, running "DIFFICULTY IT for me. NOTHING WORKED! PLEASE HELP - I'M DESPERATE NOW. In ADDITION, whenever I search for "microsoft download" and click on it, Internet Explorer displays this web site AND other window on the home page! For Mozilla, it says. UNLISTED URL. WHAT NOW? PLS HELP!

    I finally solved the problem with the help of the people behind the software "ExterminateIt", suggested by one of the people in this forum. That software has not fixed the problem, but the engineer of the manufacturer told Envoy tool removing a software application TDSS rootkit (TDSS version 2.4.4.0) kaspersky Lab ZAO. The problem go away, and I was able to download the Microsoft Update. "Windows update also works now, and Mozilla Firefox does not display the"URL not FOUND"or: INVALID URL ', and he stopped this regular cliqueti sound from my laptop. Internet Explorer stopped showing double the home page windows, when the download window comes out. I was really impressed! Trend Micro Pro, malwarebytes and ExterminateIt, and others of CNET has failed!

    Thanks for all your suggestions!

  • Blue screen of death after running the update from microsoft.

    Stop: 0x0000007e (0xFFFFF800010305C3, 0xFFFFFADEC2E08150, 0xFFFFFFFFC00000005, 0xFFFFFADEC2E07B60)
    It is the only information I get the blue screen. It is a new workstation 7500 Dell with Windows 7, downgraded to Win XP Pro (because of the requirements of software). I have two more 7500 workstations that are exactly as this one do not experience this problem. I was pulled to microsoft update and expressed option, begun to load all the necessary updated (27) and one failed. The Net.Framework 1 after install, I was asked to reboot. When it came, it stopped support windows with the blue screen. This system is as follows:

    Dell Precision T7500 workstation

    1 CPU X 5570 Quad Core 317-0277 2.93GHz,8M,6.4GT/s,Dell Precision T7500

    1 317 - 0333 12 GB DDR3 SDRAM ECC 3x4Go, 1066 MHz, Dell Precision TX500

    1-320-7900 dual 1 GB PCIe x 16 NVIDIA Quadro FX 3800, Quad-Monitor, DVI + 2DP, Dell Precision TX500

    1 341-9040 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

    1 341-8835 C25, all SAS, RAID 10 hard drives for 4 hard drives, Dell Precision T7500

    1-468-4322 Windows 7 Pro 64-bit Downgrade to XP Pro 64 - bit SP2, media, English, fixed precision

    1 421-1993 Windows 7 Downgrade RLOB

    1 430-3434 PCIe 10/100/1000 NETWORK CARD precision

    1-313-7458 data DVD 16 x - ROM only Dell Precision TX500

    1 421-0536 Cyberlink Power DVD 8.3, with the media, Dell relationship LOB

    1 313-7774 Dell AX210 two piece stereo speakers (black) to the precision of the Optiplex and Latitude

    1 power supply 330-3555 Precision T7500

    1 330-3156 documentation, English, Dell Precision

    1 power cord 330-3157, 125V, 2 M, C13, Dell Precision

    1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

    1 341-9032 PERC6 / i SAS/SATA hardware RAIDCard - for the connection of InternalHard readers, Dell Precision T7500

    1-330-3571 Resource DVD contains Diagnostics and drivers for Dell Precision T7500

    1 shipping material of 330-3569 for system Dell Precision T7500

    1 410-1862 adobe Acrobat 9.0 English and French, BND, precision Dell OptiPlex and Latitude

    1 420-6712 Microsoft Office Professional for Latitude, OptiPlex, Precision

    1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

    1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

    Thanks Swahti. My resolution is to return the manufacturer since it's brand new and make an Exchange.

  • I am running xp family and I don't want to install sp3. Once there is an option to 'hide' that update to the update from microsoft is not keep trying install... but I can't find this option more... so my question is: how to hide the sp3 update?

    I didn't "feel like sp3. I have no install disk for it, I only have records of sp2. If something goes wrong with my installation of windows, I want to be able to fix it!

    You don't want to hide it. Computers running under that WinXP SP2 will NOT be offered additional updates of security reviews, automatic updates will stop working, and the Windows Update Web site will not be available after April 12, 2010, until that SP3 is installed.

    HOW to get a computer running WinXP SP2 fully patched
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    WinXP SP3 is entirely-installable, if the need ever arose.

    Speaking of SP3 and "Repair install", see...

    About IE7 & IE8 and Windows XP Service Pack 3
    http://blogs.msdn.com/ie/archive/2008/05/05/IE-and-XPSP3.aspx

    How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed:
    http://support.Microsoft.com/kb/917964

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Blue screen just after the update from Microsoft.

    Windows didn't start because the following file is missing or corrupt: \system 32\hal.dell.  Please reinstall a copy of the above file.

    Went to chkdskC: / r then ask a windows command prompt.  I have service pack 2 for xp; but would rather a chkdsk to prevent files lost in space somewhere.

    all of the suggestions.

    Hi rushes,

    ·         Have updates you installed?

    Follow the steps in the article.

    Error message: Windows has not start because the following file is missing or damaged

    http://support.Microsoft.com/kb/320252

  • I received the following from Microsoft Update: 0x8024400A and 0 x 80240036.

    ORIGINAL TITLE: PROBLEM WITH WINDOWS XP Microsoft Update

    Had a hardware failure.  I had to retrieve via the backup CD, which took me to Windows XP SP 1.  After download SP 2 (in order to get to the current SP3), I received the following from Microsoft Update: 0x8024400A and 0 x 80240036.  Can you help me?

    Had a hardware failure.  I had to retrieve via the backup CD, which took me to Windows XP SP 1.  After download SP 2 (in order to get to the current SP3), I received the following from Microsoft Update: 0x8024400A and 0 x 80240036.  Can you help me?

    If you have downloaded Windows XP SP2*)<-- that="" is="" a="" link)="" onto="" the="" system="" in="" question="" (saved="" it,="" for="" example,="" to="" the="" desktop)="" and="" you="" reboot,="" logon="" with="" an="" administrative="" level="" user="" account="" and="" double-click="" on="" the="" downloaded="" file="" -="" and="" what="">

    While you have downloaded Windows XP SP3*)<-- that="" is="" a="" link)="" onto="" the="" system="" in="" question="" (saved="" it,="" for="" example,="" to="" the="" desktop)="" and="" you="" reboot,="" logon="" with="" an="" administrative="" level="" user="" account="" and="" double-click="" on="" the="" downloaded="" file="" -="" and="" what="">

    So, first thing after a reboot and connect as an administrative user, you are visiting http://windowsupdate.microsoft.com/ in Internet Explorer to do a CUSTOM for updates scan and what do you find?

    * Yes. Yes, you are a professional as far as this effort is concerned.

  • I can't install the SP3 from Microsoft Update Center

    I can't install the SP3 from Microsoft Update Center.So I contacted Microsoft Support and ran diagnostic scan tool and sent the results. They send e-mail attachment reset_subinacle. It's done. FAILED. I tried 3 times and 2 days later... still cannot copy beethov9.wma. file. So now what should I do to get this SP3 on my son's computer? My son has enough disk space for SP3 and I made sure and prepared for this installation. Does anyone know what I need to do? Help!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    jneen420

    Yes, I'm familiar with your recent discussions on this particular computer as well as the fact that he gave to your son as a used computer. Be so familiar with the history of this computer, I feel confident in saying he was already infected when he gave your son.

    I fear that the only way to get this computer secure and fully patched to Windows Update will be formatting the hard drive - and then do a clean install of Windows.

    Since you don't have the disks that originally came with the computer (and assuming that the original owner would have given them to you when gave you the computer if there were), we must assume (or at least to cross our fingers and hope) that there is a hidden restore partition that could be used to return the computer to the condition it was before first it left the factory. I can assure you that can support Dell & will help you, if not directly through the Dell Community forum:http://en.community.dell.com/support-forums/desktop/f/3514.aspx

    Follow the instructions below:

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before otherwise connect the machine to the internet or one local network (i.e. other computers) and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Other useful references include:

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    If you need extra help (in addition to that provided in the Dell forum), please start a new thread in this forum MS:http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility. Expect to pay about $150 USD (or more) for this service.

    [Yes, times are tight for all of us right now. [You might find a computer local club or a technical school that could do this work for you free of charge.]

    Wish I had better news for you, Jeannine. Good luck!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot restart the computer after downloading updates from Microsoft

    I downloaded updates from microsofts and the next step was to who I checked ok restart.
    The computer turns off and then tried to start, but stops and the error of reading a disk error has occurred.
    Press Ctrl-Alt-Del to restart. It does not work. Cannot enter safe mode or use my cd XP pro disk. Need some help here.
    Is it possible to start this computer from my laptop? My laptop using vista altimate. I can be reached at my e-mail address * address email is removed from the privacy *.

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

    Microsoft.public.windowsupdate discussions

    They will help you in the above discussion group.

    XP discussion groups:

    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

    Link above is to the XP newsgroups.

    There is a list of groups of discussion XP to the bottom of the left column.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

Maybe you are looking for