Failure of the Windows Configuration when performing disk recovery system.

Similar Questions

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• Do I still need to run the Windows Firewall when I use Norton360?

  Do I still need to run the Windows Firewall when I use Norton360?

  Hello

   
  A firewall is software or hardware that checks information coming from the Internet or a network, then it blocks or allows it to pass through your computer, depending on your firewall settings.
  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.
  A firewall is not the same thing as an antivirus program. To help protect your computer, you need a firewall and an antivirus and anti-malware program.
  
  Norton 360 from Symantec's all-in-one security service that protects your computer and your data against today's Internet threats.
   
  Norton 360 can be functioning as an antivirus, firewall, or offer according to your settings.
   
  We recommend that you only have an antivirus and a firewall on your computer, the choice of what antivirus or firewall is yours.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• Windows 7 update, showing the "verification requirements" when perform regular updates

  Hello, Microsoft community!

  After that the icon 'Get Windows 10' came, the next thing that happens when I check for updates and windows updates, I click on install. It should display "Download updates" but instead of showing "Download windows 10" after have finished downloading the updates and when you install updates, instead of showing "Installing updates" it showed "Verification requirements". Once, I thought this was actually installing windows 10 even if I don't check in the optional updates, but I've found that is not the case.

  In my taskbar and hidden icons section, I noticed the icon as usual windows update, but it says "Download updates" "Installing windows updates" instead of these notifications windows 10 weird?

  Help is greatly apperciated

  

  You can find a solution more simple to: http://www.infoworld.com/article/2993131/microsoft-windows/disable-windows-10-upgrade-nagware-on-windows-7-windows-81-computers.html

  Use the free GWX Control Panel app.

• Updates the window appear when shutting down, but do not set up the next time you start

  The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

  Hi BonnieDoon,

  1. did you of recent changes on the computer?

  2. you receive error message during the update by installing the process?

  Method 1

  See the Microsoft article below as well as try the steps mentioned and check if it works.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 2

  Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• reformat and reinstall Windows XP but get the blue screen on the windows configuration page

  I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer.  How can I make this?  I want to give this computer to my grandchildren.

  Hello

  1. why you try to reinstall Windows XP?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

  a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

  b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.

  c. do not choose the option to press R to use the Recovery Console.

  d. in the Windows XP licensing agreement, press F8 to accept the license agreement.

  e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

  f. follow the instructions on the screen to complete the installation.

  See the following link for more details on the repair facility:

  How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

  http://support.Microsoft.com/kb/978788

  Hope this information is useful.

• Impossible to install the windows update and perform the system restore

  Original title: what restore systerm causing failure/Vista

  Windows update fails with a few updates, tried to restore the back before I loaded the system machanic - fails

  Hello

  1. What is the description which are impossible to install updates?

  2. What is the message exact error do you get when you try to install updates?

  3. you get any error message while you perform the system restore?

  I suggest you to follow the steps mentioned below and check if it helps:

  Method 1: Reset components from Windows Update from the link of the suite, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2:

  If the problem persists, then try to put your computer in a clean boot state, and then try to install the update to windows.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Manually try to install updates from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Method 4: You can also try to perform the system restore , safe mode and check if the same problem occurs.

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Hope this information is useful.

• Impossible to move to the window 10, when you click on 'Download now', 'save' and 'run' on pop consequent ups happen

  Original title: window 10

  Hello

  I have Windows 7 and am unable to upgrade to window 10.  I have a Pavilion dm4 laptop with 4 GB RAM and 359 GB available hard drive.  When I clicked on 'Download now', 'save' and 'run' on consistent pop ups nothing happen, although there was a security warning, but I was able to download programs, I tried with this warning without fail.  Can anyone help?  Thank you very much!

  Jeannie

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• What (s) are accurate on the Windows 2000/XP startup disk?

  a. the startup disk can be used to boot the system on Windows 2000/XP desktop when Ntldr is missing from the hard drive.

  b. the startup disk can be usedc to start on the desktop, even when the C:\Windows folder is damaged.

  c. bootable floppy can be used instead of the startup files in the root directory of the active partition.

  d. the startup disk can be used to start the desktop, even when the partition table is corrupted.

  Let's see what Microsoft support engineers are answers!

  Then I have a few questions myself...

• Screws disappear from the windows taskbar when running

  Hello!

  It is a strange happening in the world when running LabVIEW 2014 or 2015 on Windows 7.  When the VI property-> the appearance of the window-> Custom-> customize-> box 'allow to minimize the user window"is unchecked the VI disappears from the taskbar when running.  It is moderately annoying, anyone know if there is a good reason for this behavior without papers?  Other than to keep the box checked, is there another way to prevent that from happening? I don't really feel like swapping through all possible combinations. :-)

  Thank you!

  C

  In fact, it's documented behavior.  Access the help file for this dialog box properties.

  There is a note that says:

  

• Is there a tool out of all the windows configuration settings? (gpedit.msc, services.msc)

  I am trying to build an audit tool to extract the Windows of my environment settings, and it compares with planning what I defined. This baseline scenario specifies in detail what settings should be enabled / disabled / how it should be configured.

  Because it is a large scale environment, and I know exactly what I need, I would build a tool of mine.  I've used such gpresult and secedit commands to get the settings but I can't get all the settings.  I've already got many settings in the registry, but it works to be a bit heavy.

  Most of the settings I need are in gpedit.msc, services.msc, although I can't get in/out these values by using a script.

  For example -.
  Store passwords using reversible encryption for all users in the domain = on (or off)

  This setting is in gpedit, but I can't find this setting in the registry / other functions of command line.  I noticed that most of the information is readily available in gpedit.msc / services.msc although I don't know how to automate the extraction of these parameters.

  Could you please help to automate the extraction of these parameters?  I want ths process is transparent to the user / server administrator to reduce the interaction required for the information.  A macro will not allow the extraction of these parameters, while the computer is locked.

  I'm looking for Windows 2003, XP and 7.

  Thanx

  Hello

  Your Windows Xp issue is more complex, while we usually answer on the Microsoft Answers site, you can post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Pop 0xC004E002 error code for the Windows Activation when to start my laptop

  Today, October 21, 2011 morning I start my laptop when the window have problem to boot if I start in safe mode, and then restart. At this time, I got the error for the Activation of the code window is 0xC004E002. Discription of the error is "the software licensing service reported that the license store contains inconsistent date".

  Please advice how I can fix this error.

  Thanking you

  Kind regards

  Mess Unagar

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  That said, it seems that the license store is corrupt - so, try the following.

  (1) open an Internet Explorer window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.
  (12) you may need to enter you product key and activate it.

• Win XP failure of the Windows operating system, making Noah begins.

  Hello everyone,

  My computer got an operating system failure, this morning, I can't do to start windows. System is win XP. Recently, I installed a new terabyte of hard drive as secondary. I need some advice also, the main hard drive, I had (were I got the operating system) is 250Gig only and I wanted to install Battlefield Bad Company 2 on the new terabyte of hard drive and use the 250gig for purposes of Os only, this may be the reason for the failure of the system? launch the game from the secondary hard drive?

  How can I fix? I would greatly appreciate any help you guys can provide and advice. (Note that this has happened to me before) and I had to reformat etc, and get a new terabyte cause it damaged (what im using is a new replacement).

  Windows my computer is windows 98 with a win XP upgrade...: S

  It is a Forum of Vista.  Please repost your question in the Forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where XP experts will be more than happy to help you with your problems.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to create a controller for the window "Configuration of spectral measures.

  Hi all

  Problem: We know that to change the 'window' for spectral measurements. There need to double-click it, the spectral measurement set-up window pop up and select regardless of the window (for example, no, Hanning, Hamming, Blackman Harris etc.) we like to not view. Instead of double click in the diagram, I would like to provide users a controller of the window in front panel as a list, so that they can select the type of window appropriate according to the needs.

  I find how to solve it. Can someone share their knowledge have her number?

  Right-click on spectral measures and "convert to Subvi.  Right click on yellow VI that appears and click Open the front panel.  Replace the constant 'Spectrum Window' with a control of enum (0 = None, 1 = Hanning, 2 = Hamming, etc.).