Failure of the work of the FTP: illegal characters in path

I have setup a FTP task in tide but it keep failing. The error is "Illegal characters in path" I have recheck all the path in the FTP task, everything looks ok. Any ideas?

Hi adminvest,

Have you checked the name of the file itself to see if it contains illegal characters?

If you need help, then I suggest post more details/screenshots of the path or file name, but hide the connection information and the server if necessary.

ARO

The Derrick

Tags: Cisco DataCenter

Similar Questions

Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

I work reasonable locally and on the web in all other browsers.

Stupid FF?

The HTML code is as follows:
```
<table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
  <tr VALIGN="TOP">
    <td VALIGN="top" ALIGN="left" width="463">
<object WIDTH="340" HEIGHT="193">
      <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
      <param name="allowFullScreen" value="true">
      <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
    </object>
</td>
    <td VALIGN="top" ALIGN="left" width="403"></td>
    </tr>
</table>
```
I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

Any thoughts?

If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

Alternatively, you can try to disable hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

picture password stopped working, says there is a failure during the registration process please try again tried for 2 days

picture password stopped working, says there is a failure during the registration process please try again tried for 2 days. He worked for weeks and then stopped. I tried to change it and get the same message

Hello

You can contact Microsoft on phone, please visit the below mentioned link:

How and when to contact Microsoft and support Customer Service:

http://support.Microsoft.com/kb/295539

When the FAILURE of the Worker.State occurs in a task?

How detect that a Worker.State has no PU occurs in a task? or say when the FAILURE of the Worker.State occurs in a task? It's when an exception occurs in the task call() method?

Consider the code below:

import java.io.BufferedReader;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.net.URI;
import java.net.URISyntaxException;
import java.net.URL;
import java.net.URLConnection;
import javafx.concurrent.Task;


/**
 * Background task to fetch the all classes documentation page from a URL
 */
public class FetchDocListTask extends Task<String> {
  private final String docsDirUrl;


  public FetchDocListTask(String docsDirUrl) {
  this.docsDirUrl = docsDirUrl;
  }


  @Override
  protected String call() throws Exception {
  System.out.println("---- FetchDocListTask  docsUrl = " + docsDirUrl);
  StringBuilder builder = new StringBuilder();
  try {
  URI uri = new URI(docsDirUrl + "allclasses-frame.html");
  URL url = uri.toURL();
  URLConnection urlConnection = url.openConnection();
  urlConnection.setConnectTimeout(5000); // set timeout to 5 secs
  InputStream in = urlConnection.getInputStream();


  BufferedReader reader = new BufferedReader(
  new InputStreamReader(in));
  String line;
  while ((line = reader.readLine()) != null) {
  builder.append(line);
  builder.append('\n');
  }
  reader.close();
  } catch (URISyntaxException e) {
  e.printStackTrace();
  }
  return builder.toString();
  }
}

When the State.FAILED occurs? In fact, I want to write a code to detect everything simply if the computer is connected to the internet. Hope to help ~

Yes. If the call() method stops due to an unhandled exception, the condition of the property becomes IMPOSSIBLE. If a return statement is executed successfully, the ownership of the State passes to SUCCEEDED. There are no other possibilities.

You can test it with something like:

import javafx.application.Application;
    import javafx.concurrent.Task;
    import javafx.concurrent.WorkerStateEvent;
    import javafx.event.EventHandler;
    import javafx.scene.Scene;
    import javafx.scene.control.TextArea;
    import javafx.scene.layout.BorderPane;
    import javafx.stage.Stage;

    public class TaskStateTest extends Application {
        public static void main(String[] args) { launch(args); }
        @Override
        public void start(final Stage primaryStage) {
            Task exceptionHandlingTask = new Task() {

                @Override
                protected Void call() throws Exception {
                    try {
                        throw new Exception("Boom");
                    } catch (Exception exc) {
                        System.out.println(exc.getMessage() + " handled");
                    }
                    return null;
                }

            };

            Task exceptionThrowingTask = new Task() {

                @Override
                protected Void call() throws Exception {
                    throw new Exception("Boom");
        //            return null;
                }

            };

            final BorderPane root = new BorderPane();
            final TextArea textArea = new TextArea();
            root.setCenter(textArea);

            primaryStage.setScene(new Scene(root, 600, 400));
            primaryStage.show();

            registerHandlers(exceptionHandlingTask, "exceptionHandlingTask", textArea);
            registerHandlers(exceptionThrowingTask, "exceptionThrowingTask", textArea);

            Thread t1 = new Thread(exceptionHandlingTask);
            Thread t2 = new Thread(exceptionThrowingTask);
            t1.start();
            t2.start();
        }
        private void registerHandlers(final Task task, final String msg, final TextArea textArea) {
            task.setOnFailed(new EventHandler() {

                @Override
                public void handle(WorkerStateEvent event) {
                    textArea.appendText(msg + " failed\n");
                }

            });
            task.setOnSucceeded(new EventHandler() {

                @Override
                public void handle(WorkerStateEvent event) {
                    textArea.appendText(msg +  " succeeded\n");
                }

            });
        }
    }

Failure of the audit on the iPhone, but works in iTunes

Hello

I had a strange problem:

I can log on successfully to my desktop (Windows) by using my AppleID, can see my account balance and buy free apps.

But I use the same AppleID on my iPhone 6Plus, it always shows: "failure of the audit, your Apple ID or password is incorrect."

can anyone help?

Thank you very much.

Hi all

After 2 hours of research and new attempts, I finally solved this problem.

1. just to keep a new attempt on the iPhone, until the account is locked.

(Note, only the account on the iPhone is locked, can I still use iTunes Windows and web to connect on the same Apple ID]

2. then follow the instructions on the screen to unlock the account.

(you will be asked 2 secret questions when the account is set up a few years ago)...

Once the reset is OK, the same account is included to connect the iPhone and buy apps. (Yes..!)

Hope this will be useful.

kpang1

The FTP passwords not retained. Business catalyst widget doesn't work does not correctly

I use OS X 10.10.3, Dreamweaver 2014.1.1 Build 6982.
I am unable to connect to my remote server through catalyst for the company. He tells me that my credentials are incorrect and check the settings.
I check my credentials for the ftp server, and it is does not store the password. I have Re-enter the password link and the test. No problems.
I'm trying to connect to a remote site again to update the pages and the same problem occurs. I will return to the site settings and the password for the ftp is still a Virgin.
I followed the steps described in the known issue page and there is nothing to help.
Add the widget to business catalyst is not able to connect on the site either.
I would really like to find a solution to this as soon as possible because I need to update my site via Dreamweaver.
Novel I am able to log on to the web portal for my site of catalyst for business without problems, this isn't a problem with my account.
Thanks in advance.
! Dreamweaver

It seems that the problem was with Mac OS X 10.10.3 beta.

I just installed the latest update and the problem is solved.

Thanks for the effort.

Qosmio X 70-B-10 t - failure of the graphics card

Hello. I offen had failure that the graphics card driver hang up and recovered himself. But today, I got this failure to the course to watch live TV streams and it seemed to me that the laptop does not work correctly. I tried to restard and then I get this message: DRIVER_IRQL_NOT_LESS_OR_EQUAL (cmdhlp.sys). It must be the graphics card and I don't think it's a hd or RAM failure in this case.

Any tips? Repair? New graphics card?

Thank you!

On this virtual path, it is not easy to say what can be the reason of this failure.
Repair is always the last step. What you can do is to test the features using Notepad with "factory settings, without having to install additional software.

What operating system do you use?
Do you use the original display driver or some day?

Pavilion dv6t 7000: failure of the BIOS (Caps lock flashes twice a secone)

My laptop model number is Pavilion dv6t 7000. In recent days, he had a problem. When I turned off my laptop and put it off, the next day I find that is not starting. A black screen, caps lock shift is blicking twice and f12 key is red (WIFI). Nothigs happen. Then, I searched and came to know that it is the failure of the bios. Then I tried some way and nothings worked. ATLAST when I remove the cmos battery it set again after 2 or 1 minute its starts fine. Then againg I turn off the computer and its power day following again the same problem. I was to solve this problem by removing cmos battery and put it again for 4 or 5 days. But today this tip does not work. I tried so many method like (Windows key + B), (byholding down the power button for 1 minute), (Flash UEFI) etc. to solve the problem of failure of the bios, nothing worked at all. What is the problem? Is this really a failure of the bios? How can solve this problem? What is a dangerous problem? There the chances that my laptop is completely exhausted?

Hello
beep codes or led lights will Flash at the start of the system may indicate a hardware fault or BIOS you say you have tried all the troubleshooting steps

I would like to run the hardware check to make sure it's all working please follow the guide below for instructions and report:

http://support.HP.com/us-en/document/c03467259#AbT1

Tests using UEFI diagnostics and run the quick test

Thank you
James

Failure of the Time machine backup could not save "My Passport"

When I try to do a backup on my Passport using Time Machine, he used to work over the years, and now it is the message I get:

Failure of the Time machine backup could not save "My Passport"

Does anyone has an idea to help me with this problem?

(Sorry for my English but I speak French in Switzerland...)

Have you tried to run utilities disk to check/repair the external hard drive? Here is something you can try. http://pondini.org/TM/A4.html

W510: How do I access my data from a failed hard drive after the failure of the motherboard

I made a mistake and has paid for major .

This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

Symptoms: It began at the start, kept a beep, sometime just close and will start.

In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

-Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

-buy an equivalent model laptop and put the HARD drive in there

-by an external SATA hard drive enclosure and mount it via USB on another computer

I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

I'll appreciate any suggestions for accessing my data.

Best regards!

All,

Thanks for the suggestions.

I was able to recover my computer and all data on it.

Just to describe what I have done, here are the details.

Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

Thanks again,

brent86

Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

OP: Action Center... PC problem: 1 important message

After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

Hello Irfan,

Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate. Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me. On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers. Not the only one, I have is the product key which is one 25-alpha-numeric. I tried to enter only and does not pass. This is why I say that I can pay for help since I did not ' have the product ID. Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think? If you can get back on track, I would be very grateful and thank you once again to be a big help!

wandrinstar

Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

Keep up the good work,

wandrinstar

Is windows update causes the failure of the system?

I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

No, do not keep your computer fully patched all the time causes more problems.

4 steps to protect your computer
http://www.Microsoft.com/security/pypc.aspx

NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

The above has applied to WinXP SP1 computer your aunt since October 2006.

For you and your aunt...

HOW to get a computer WinXP SP1 or SP2 fully patched
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

HP6830: Failure of the print queue

HP replaced my 6830 due to failure of the print head. New printer works proud desktop using Vista. Previuosly I could print from my laptop wireless as well, but it's time the print queue says printing, fails to print and return to errot impression. I know that thw laptop is connected to the printer thr and I even can it ping ipconfig without problem. I have been through software support, and to the low load options hear everything without any result. I am now confused.

Hi @3391816Sablenip,.

I read your post and see that the replacement printer is wireless print on the Windows Vista-based computer, but not the laptop running Windows 7. I will definitely do my best to help you.

If you have a valid IP address for the printer, then try and access the Web built-in to the printer server.
Type the IPv4 address in the address bar of your web browser. (Internet Explorer) It to load the page.

You mentioned that you can test the printer, just to check a real contact, check the network IPv4 address on the computer to see if the first 3 sets of numbers match the IPv4 of the printer address.

Press the Windows and R key at the same time, to show the command line run, type cmd, then type Ipconfig.
Check the IPv4 address.
Now, check the IPv4 address for the printer.
If this isn't the case, then the printer and the computer are not on the same network.

Do the first 3 sets of numbers match?

Check the address IPv4 of the computer to verify that it matches the IPv4 of the printer address.
Printers and devices, right click on the printer, on the left, click printer properties, select the Ports tab, click on Configure Port.
If they do not match and then close the window configure the Port and click on create a port and follow the instructions in the wizard.

Type the IPv4 address.
Make sure the printer is online.

Test the printer. If creating the new port doesn't work, run the Add Printer Wizard.

If you're still having problems, download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

If the problem persists, try the following steps to see if it will be useful. HP printers - print jobs stuck in the print queue (Windows).

If you appreciate my efforts, please click on the "Thumbs up" button below.

If you have any questions, please let me know what steps you have taken and the results. Thank you.

Cannot load a user profile... erreo "the failure of the service USER PROFILE SERVICE to connect.

Hello

not able to load my 1st admin. The user's profile, every time I try to load the message appears "the failure of the service USER PROFILE SERVICE to open a session. I tried some of those ways, but nothing happens. Please help me with this problem...

1. reboot your computer and press F8 multiple times until you see a menu similar screen, if you see the Windows startup screen, then repeat this step

2. highlight and press enter on Mode safe mode with command prompt. Try to connect to it. If it still does not work, proceed to step17

3. If you are able to connect, once the command prompt appears, type: net user administrator Word of past / active: Yes (you can specify the password for the administrator account.)

4. If you get a message "the command completed successfully" and then restart your computer by typing: shutdown - r

5. start again by pressing F8, but this time choose just the SafeMode.

6. you will be able to log in as administrator with the password set in step 3

7 hit (windows logo) + r.

8. type regedit

9. once the Registry Editor opens, search for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

10. in the left pane, find the one that begins with S-1-5... and ends with. BAK; If you can't find one, go to step 15

11 right-click and click Rename, and then change it. TO BAK. BK

12 right-click with the same numbering but without the. BAK and Add. BAK add at the end

13. right click on the one that you have renamed in BK and clickRename, remove the. BK

14. Subsequently, you have activated the. BAK to the end of the second entry in the first. That should probably fix your problem.

15. If you do not find one. BAK then try this: open Explorer Windows for C:\Users\Default\AppData\Local\Application data

16. If you find an other Application Data below the one you are on, and then delete. Who should probably also solve your problem.

17. If you can not log in Mode safe mode, restart and press F8 until you see the menu again, and then press enter highlightingRepair your computer

18 wait for all the Windows files to finish loading, then hitNext when it asks for the language of the keyboard.

19. try to connect here also, choose your username in the menu drop-down, type the password, then go to step 23

20. If it still doesn't work, then if you still have your Windows installation CD, put it in, and then restart your computer.

21. press F12 until you see a menu of boot options, choose boot from CD

22. the language of the keyboard and then click Next. Find repair your computer for a little below the center-left.

23. choose Open command prompt and type: net user administrator / Active: Yes password (here again you can specify a password)

24. close the command prompt and click on restart and go to step 5 "

Here's a Fixit for cause of you, so that you don't have to do it yourself:

http://support.Microsoft.com/kb/947215

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Failure of the USB2 connections

I have a Hitachi 250 GB hard drive and a keyboard wireless mouse. I had to move connections USB2 from the monitor to the computer case due to the failure of the USB2 connections on the monitor. The keyboard and mouse don't work, but the hard drive is not detected in windows Explorer. It is detectable by using Device Manager where it says the device is working correctly, but I can't access it. Good thing, I don't have a lot of hair out.

In the device under Bus USB locate controllers your hard disk manager, right click-> Uninstall, then restart your computer.

Or
Try it on a different computer if the symptoms are the same, it could be a bad cable, try a different cable or it could be a faulty hard drive enclosure.

Failure of the work of the FTP: illegal characters in path

Similar Questions

Maybe you are looking for