Family fishing does not limit the time on the PC

Similar Questions

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Family safety does not block the google chrome

  Sir/Madam,

  Recently, we found that the Windows parental control does not on Google Chrome, especially when using https. I'm trying to block Facebook, Twitter and Youtube, but these sites are working when using https rather than http. This issue is with Google Chrome. Please help me solve this problem.
  Kind regards
  Jameel Basha.

  Hello

  I would say to contact Google Chrome support team for assistance.

  http://productforums.Google.com/Forum/#! Forum/chrome

• DBMS_SCHEDULER defining the max_job_slave process does not limit the jobs

  Oracle 11 g 2 RHEL 5 bits 46
  
  Hi all.
  
  We were having a problem where a ton of jobs (DBMS_SCHEDULER) were both running and so hamper performance. So we wanted to set a limit on the number of jobs that could run at a time and I ran the following statement to change the NULL value to 2:
  

  SQL> BEGIN
    DBMS_SCHEDULER.set_scheduler_attribute (
      attribute => 'max_job_slave_processes',
      value     => 2);
  END;
  /  
  
  SQL> select * from dba_scheduler_global_attribute 
  where attribute_name='MAX_JOB_SLAVE_PROCESSES';
  
  ATTRIBUTE_NAME                 VALUE
  ------------------------------ -------------------------------------
  MAX_JOB_SLAVE_PROCESSES        2

  However, when I looked at the work in progress in OEM, there was still more than 2 jobs that were running. I'm trying to understand why he is not be affected by the max_job_slave_processes parameter?
  
  The job_queue_processes affect it? I thought it was only for DBMS_JOBS?
  
  Any help would be appreciated.
  
  Thank you.

  Hello
  I found this on someone's websiite a few weeks ago. It can relate to your problem, or not. Don't know how you have set job_queue_processes.

  "Bug 3817936 - closed, not a bug."

  "This is the expected behavior, not a bug. If the JOB_QUEUE_PROCESSES
  parameter is not 0, then its value will prevail on the
  Attribute MAX_JOB_SLAVE_PROCESSES. However, if the JOB_QUEUE_PROCESSES
  parameter is 0, then the attribute MAX_JOB_SLAVE_PROCESSES will act as the
  upper limit for the number of the slave. I modified the test scenario for
  This bug and verified that it is indeed the case. »
  .
  "At some point in the future, it is expected that DBMS_JOB will be updated so.
  to be applied by the current code DBMS_SCHEDULER. When this
  Sometimes, the JOB_QUEUE_PROCESSES parameter will be is no longer necessary and the
  Attribute MAX_JOB_SLAVE_PROCESSES will always act as the upper limit of the
  number of the slave. »

• Windows does not start: every time I type my password it starts to load, but then it freezes

  Help, please!

  • my windows vista family premium does not pass the login window, every time I type my password it starts to load, but then it freezes
  • I already try to restart my computer, but it of not working, now will work in safe mode
  • WHAT CAN THE PROBLEM PLEASE HELP!

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Every time I load improved Firfox 3.6.6 I get an error message saying that the new version does not have the proxy setting.

  Whenever I load the latest version of Firefox 3.6.6 he says that he does not accept the proxy setting. Given that I've never had a problem like that, I don't know how to correct it.

  This has happened

  Each time Firefox opened

  I upgraded to 3.6.6 today. After installation, I am unable to open a Web page with the exception of the locally saved files. How can I solve this problem?

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11

  Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11, version 12 is sucks.

  Hello, Simone

  I'll assume you're on Windows 7. Windows Media Player 12 is not supported on Windows Vista or XP and as such, you will need to go back to Windows Media Player 11.

  You can check the permissions in the registry to ensure that it is able to record information.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Open the registry editor by clicking on start, type regedit.exe in the search box and press on enter, you may be prompted to continue.

  In the registry editor, navigate to HKEY_CURRENT_USER, Software, Microsoft, MediaPlayer, then Preferences.

  It should be an element named LastLocation_26, right-click on it and select Rename, and rename it to old LastLocation_26.

  Leave the open registry editor and open Media Player, then move it to your favorite place and close Media Player.

  In the registry editor, press F5 on your keyboard and check if LastLocation_26 has been recreated.

  If this is not the case, there is probably a permissions problem.

  If so, the location must be registered.

  Let us know.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error, "the executable file that this service is configured to run does not implement the service" when I try to synchronize the time in Windows XP.

  After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title.  In addition, type net stop w32time responded that the service was not working.

  Original title: the executable that this service is configured to run does not implement the service

  After checking the configuration in the registry and check or update if necessary from the link below:

  Then the time errors that I got from the command prompt window:
  Order--> net stop w32time & net start w32time
  Response--> The Windows Time service is not started.

  Order--> net start w32time
  Response--> system error 1083.
  The executable program that this service is configured to run in does not implement the service.

  --> Command w32tm/Resync /rediscover
  Response--> sending command to local computer resync...
  The following error occurred: the RPC server is unavailbale. (0x800706BA)

  Hi Mitchell_G,

  Thank you for keeping us posted.

  The steps of items offered in the previous post?

  We know if you need help. We will be happy to help you.

  Thank you.

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) what are the troubleshooting steps you tried to solve the problem?

  I suggest you follow the steps in the KB article below and check if it helps:

  http://support.Microsoft.com/kb/968002

  Hope this information is helpful