Fan control with 5750G and other machines problems

Similar Questions

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• Battery GS728TS with interfaces and the LAG problems

  Hello

  We have 2 x GS728TS (running firmware 5.3.0.26) switches connected together in a pile with double stacking cables.

  There are 4 servers connected to the battery through the LAG. Each LAG is composed of 4 members and 2 VLANS, 2 on each switch in the stack. Each server running multiple virtual machines.

  Until recently, everything worked fine. However the last week we have suddenly taken in an issue where some (not all) computer virtual on a host could not communicate with VM on other hosts and vice versa.

  After investigation, we discovered that the entries in the ARP on the troublesome VM table did not contain correct entries. Restart the virtual machine has not resolved this. so I restarted the battery and after a long period of time (15 min) the battery came and most of the questions have disappeared, but not entirely.

  So, I checked the table of addresses on the stack of the switch and found that it contains 'bad' entries as well. It shows that some have learned mac addresses are on specific interfaces instead of a lag, and also sometimes these interfaces are not even part of the specified LAG.

  If I turn off one switch and keep it turned off (or the other) then everything starts working correctly again.

  Anyone have any ideas?

  Thank you

  Shaun

  Hello

  During an extended last night maintenance window, I turned off and removed all the power to the two switches in the battery for about 5 minutes.

  I re-applied then power on both switches and after allowing then to start, check and they now seem to be working properly again.

  I just re-checked the switches (about 8 hours later) and they don't always work very well - no notice or detected problems.

  Concerning

  Shaun

• Error with Facebook and other web pages; document. Body' is null or not an object

  Original title: error line: 19 tank: 23004 error line: 20 cha:124

  document. Body' is null or not an object line: 19 tank: 23004... object doesn't support this property or method line: 20 char: 124... I get these errors on facebook and other web pages help me please!

  Hello

  IE - Tools - Internet Options - Advanced tab - navigation on the article - check the BOTH Disable script
  boxes of debugging.

  Close and restart IE.

  ------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ========================
  ========================

  Tips for solving problems with Internet Explorer
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  ------------------------------------------

  Methods more troubleshooting for Facebook and other questions of the site, if needed:

  Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.

  https://www.Facebook.com/

  http://www.Facebook.com/

  http://www.Facebook.com/login.php

  http://www.Facebook.com/Farmville

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  ------------------------------------------------------

  Maybe using Compatibility Mode will help you.

  Introduction of compatibility view
  http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Some Web sites are not displayed correctly or work correctly in Windows Internet
  Explorer 8
  http://support.Microsoft.com/kb/956197

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I hope that mozilla can correct a bug. Homepage sometimes gets screwed up. Because of stupid software that inviolable with her and other sites... Let me explain...

  Mozilla is incredible, but it happens often, sometimes as now, DivX software asked me if I wanted to make BING my default homepage. Of course, I said no. Well he set it anyway in firefox. Gee, thanks Divix and thank you microsoft for join the paths of many adware jerks out there. Finally anyway, I wanted to return to firefox by default. Well, I can't. I click on this button and above, click Save it keeps things with bing. I really hate bing. I love google, but I also like the firefox logo I have whenever I click on the home button. So now, as usual, there is no way to set back as it was, no matter how many times I reboot the computer, the browser, click on 'restore' default button I am now once again stuck with a search engine to the firefox page that I hate so much. The only way to solve this problem is to uninstall firefox, including all add-ins and plugins and all things private, to uninstall completely, then reinstall it. Man, I'm so tired of this just cuz some developers are too lazy to follow the work of other developers and consumers to force their gibberish in my favorite web browser now. Can Mozilla possibly resolve the problem there is no possible way any developer could ruin for me no more? I really like the default fees page, with the logo of Firefox and Google as default. Thank you.

  While many setup programs will honor the wishes of users,
  There are some who are not. And others who do not bother to ask.

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• Put in page works with IE and Firefox, different problems with the iPhone and Blackberry

  I created a website using DW CS4 www.hollisterairshow.com . When using my PC WinXp/IE and Firefox without problems occur in the page layout. However, I have a couple of users who have reported problems when you view the web site by using their smartphones.

  An iPhone user said the second line of the section containing the flag / date / flag is not centered, but left-aligned, everything is fine.

  A Blackberry user indicates the second line of the topic is properly aligned, but the menu bar that must appear on the left is missing!

  I don't have an iPhone or Blackberry, is it possible that I can test this using my PC? Does anyone have an idea what could be causing these issues?

  Thank you

  Tony

  I agree with the previous poster here.  I think that the best response to this is to create a separate site for mobile users, which is called case of detection.  It will be thought to create a site that is optimal in both environments.

  Shane

  DomainShane

• Interface CC with Lightroom and Photoshop CC problems

  I downloaded the trial versions of CC of Lightroom and Photoshop CC (5 days left!). I have disabled the CS6 and LR4, I already installed it on my Mac. When I try to edit in Photoshop Lightroom CC CC, it does not work. After a long while (a few minutes), I get a format error message or a message "failed to open photoshop cc." I checked the preferences of many users and tutorials Adobe blogs. He has always worked with CS6 and LR4. The Photoshop CC and LR CC function as separate applications. Can anyone help please?

  Reinstall LR and PS from the CC app.

  First LR and Ps

• Help with CRM and other...

  I've been contemplating hiring a freelance designer of BC.  I have skills great design and can I build great sites, but when it comes to add complex works - well, let's say I'm a little disputed. I have some understanding of the process, but somewhere in this process that seems to get lost.

  Currently, I have a lot of work and I can manage websites easier, but I have one in particular which is a serious enough to build site.  I was hoping to find someone to help me learn some of the more complex features such as adding CRM, calendars, forms, etc., how to add them to the Muse has created sites or regular BC.  I watched the videos of learning several times, but really, they explain the process from start to finish so I know how to recover the content blocks, I don't know what to do with them later! I know, it's not good.

  Does anyone know where I can place an ad for more help. I'm only interested in finding someone with BC experience right now. I don't want to be flooded with calls and e-mails from those who don't even know what BC is so I hesitate to use the online help pages.

  I would be grateful for any suggestion.

  Thank you!

  Hey there,

  The company that I work provides training to partners in Sydney and works for any partner in need as well.

  You can contact [email protected] and mention I went you here to see what can be done.

  You can consult the section of the market on the forums for everyone that you think may be able to help.

  You can also consult the section of the guide, and you will see a few links on the right to 3 sites of third parties such as BCGurus guide:

  http://forums.Adobe.com/community/business_catalyst/documents

  If you are looking to hire someone, you can post on the market or try on linkedin.

• problems with SPA112 and answering machine

  Recently installed a SPA112 unit, which until this works fine without any problems, but have a few minor issues. Among others, I can't the 2 sec machine records messages; When there is an incoming call the answering machine picks up the call of the appellant Gets a busy; which means that the appellant is not able to hear the outgoing message, nor able to save?

  Worth mentioning that I have before that used a vDSL Thomson 78 modem x who offered two pots the same equitment I use was connected to and also the autoresponder has worked with. Then nothng has changed with the Setup program expect that the SPA112 has replaced the modem ADSL Thomson when it comes to managing the voip part.

  One suggestion I've seen is to change the 'delay to reorganize' at 15, which until now did not make a difference. In addition, the waveform of the ring has the sine value and the default value of the voltage.

  Open to suggestion to point me in the right direction what to look for in the config for the SPA112.

  Format text in time with no seconds and encoding UCS-16 can be ignored. But the messages are truncated at the first ',' and the rest is missing. Second file is the SQLite database...

  You are to test my ability do identify and treat the data hidden, isn't she?

  Well, I decided to extract the lines of SQLite database as TXT form is incomplete. I don't know any format if column Tm, fortunately, we have no absolute time and I wish I have guessed correct relative time in seconds.

  So result (inline comments):

  Incoming calls:

  002.13 > CC_eventProc(), the event: CC_EV_SIG_CALL_ARRIVED (0 x 31), cover: 0, rating: 0, par2: 0 x 40956900
  002.16 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_RINGING
  002.16: CID:CID_initGen() [0] > won 0 delay 1200 phone abcdefg786 name 46bcdefg786
  002.23: CID:OnHookTx PolRev

  Transmission of Caller ID:

  002.33 > uchSendDTMF(), sending 12 DTMF to line 0
  002.33: [0] beginning of the DTMF/FSK CID, CID_ST_ACTIVE
  002.48 > uchSendDTMF(), sending of DTMF a on line 0
  002.64 > uchSendDTMF(), sending of DTMF b on line 0
  002.80 > uchSendDTMF(), sending of DTMF c line 0
  002.96 > uchSendDTMF(), sending of DTMF d to line 0
  003.13 > uchSendDTMF(), sending e DTMF on line 0
  003.29 > uchSendDTMF(), sending of DTMF f at line 0
  003.45 > uchSendDTMF(), sending of DTMF g on line 0
  003.61 > uchSendDTMF(), sending 7 DTMF to line 0
  003.77 > uchSendDTMF(), sending of DTMF 8 to line 0
  003.93 > uchSendDTMF(), sending 6 DTMF to line 0
  004.08 > uchSendDTMF(), sending of DTMF 14 on line 0
  004.25: [0] CID CID: FACT

  Six rings:

  004.52: CID:Ring now
  004.54 > SLIC_startRing State 0 ts 0x1aa4ccon 1000 off 5000 len 60000
  004.54 > pol [0] of the event on the cad of ring 0 0
  009.33 > pol [0] of the event on the cad of ring 0 0
  014.12 > pol [0] of the event on the cad of ring 0 0
  018.92 > pol [0] of the event on the cad of ring 0 0
  023.73 > pol [0] of the event on the cad of ring 0 0
  028.52 > pol [0] of the event on the cad of ring 0 0

  Hook:

  029,50 > off hook [0]
  029.51 > NEW_CALL_STATE(), dial 0: former State = CC_CST_RINGING, new State CC_CST_ANSWERING

  Fully connected call:

  029.57 > NEW_CALL_STATE(), dial 0: former State = CC_CST_ANSWERING, new State CC_CST_CONNECTED

  Disconnected from the remote side:

  039.62 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
  039.62 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALID

  The CPC sent to the device called:

  047.64 > CPC SLIC_SET_OPEN_STATE on line 0
  048.05 > CPC go to line 0 in CC_CST_IDLE
  048.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLE

  Called device still picked up, assuming that the new (outgoing) call:

  048.07 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
  048.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING

  Called device hung up the phone, call the cleaning:
  048.72 > hook on [0]
  048.73 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE

  Camera won, outgoing call starts, digit collection:

  060.05 > [0] off Hook
  060.06 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
  060.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  065.20 > SIP_sessDlgEventProc: event: 41 (SIP_EV_DLG_TERM), ucState: 4

  Device on the hook even once, no figures were received in this cycle:

  066.01 > hook on [0]
  066.01 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE

  Camera won, outgoing call starts, digit collection:

  079.17 > [0] off Hook
  079.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  081.68 > line: 0 figure DTMFON event has received a
  081.81 > line: 0 DTMFON received the event figure b
  081.94 > line: 0 DTMFON received the event number c
  082.07 > line: 0 DTMFON received the event sales
  082.20 > line: 0 DTMFON received the event e figure
  082.36 > line: 0 DTMFON received the event number f
  082.49 > line: 0 DTMFON received the event figure g
  082.62 > line: 0 sales event received DTMFON 7
  082.76 > line: 0 sales event received DTMFON 8
  082.89 > line: 0 sales event received DTMFON 6
  090.96 > cepDialingProc(), the event = 33 (CC_EV_TMR_DIALPLAN)

  Figures gathered (numbering commited by dial plan timeout):

  090.96 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_CALLING
  090.97: call:[email protected] / * /: 0, rc = 0
  091.47 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CALLING, new State CC_CST_PROCEEDING

  REGISTRY procedure was shot and completed during call setup:

  097.66 > RegOK [0]. NextReg in 296 (1)

  Fully connected call:

  099.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_PROCEEDING, new State CC_CST_CONNECTED

  Disconnected from the remote side:

  103.75 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
  103.76 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALID

  The CPC sent to the peripheral component:

  103.76 > statr CPC CC_EV_TMR_INVALID timer
  111,76 > CPC SLIC_SET_OPEN_STATE on line 0
  112.19 > CPC go to line 0 in CC_CST_IDLE
  112.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLE

  The device still picked up, assuming that the new (outgoing) call:

  112,22 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  Flash hook events occurred. Dial 0 (data collectors) cancelled. New call (1)
  created, collection figures:

  112,37 > flash hook [0]
  112,37 > CC_eventProc(), the event: CC_EV_USR_HOOKFLASH (0x3), cover: 0, rating: 0, par2: (none)
  112,37 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE
  112.43 > NEW_CALL_STATE(), call 1: former State = CC_CST_IDLE, new State CC_CST_DIALING

  No number with shot composition timeout:

  136.34 > NEW_CALL_STATE(), call 1: former State = CC_CST_DIALING, new State CC_CST_INVALID

  Line is still the hook at the end of the journal.

  Well. So we have commented on the newspaper. Now - what is your question?

  Note that the CPC Signal (control Signal party call) is a momentary drop in voltage (0 volts DC) on the line for a period of time. It is the way in which the side 'server' of analog line (SPA112 here) informs device calling (your machine here) that the call has been disconnected by side called. Cisco is also using the CPCS to report the same he remote disconnect the case of incoming calls despite CPC does not has been provided for this direction of call.

  Not all phones can recognize the signal of the CPC, especially when called. SPA112 must be configured according to the particular phone's capabilities.

• Problems with Server 2008 R2 Kerberos with Mac and CentOS machines? Need to re - join domain

  We are having a problem with our Mac and Linux / CentOS machines constantly having to be re-attached to our AD domain.
  We are able to join machines to the domain successfully, but after a few weeks or if authentication is broken and we again join them to the domain.
  I see Security event logs on our domain controller when kerberos authentication fails.
  On the linux server - I see this message in the logs
  -binding failed: server not found in the kerberos database.

  I'm guessing this has to do with Server 2008 R2 and incompatible mac / linux versions.

  Any ideas?

  Hello

  I suggest you try to post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  It will be useful.

• New update 10.11.3 is at the origin of the problems with safari and other browsers on some sites.

  Anyone having problems with the new update and safari hung on some sites?

  What sites would those be?

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Web proxy settings are not configured correctly. Have problems with games and other applications.

  original title: apps do not correctly configured

  The default Outlook Express mail, The default Outlook in the Express News with the Internet Explorer Web Proxy are not configured correctly. Because I had problems with the game apps and stuff in my email address.

  Hello

  · You receive an error message or error code?

  You can access the links below:

  How Set Up Outlook Express - and http://support.microsoft.com/kb/2409264

  To configure the web proxy:

  HOW to: Configure Internet Explorer 6.0 as a Web Proxy Client in Windows 2000

  http://support.Microsoft.com/kb/310296

• Mix volume slider controls appear on the screen and interfere with internet and other functions.

  Without warning, that controls Volume slide bar appears on my screen fluctuating levels as I was changing the volume/bass/treble level. This stops / blocks everything I do on the laptop such as typing, internet, turn on my connection 'Wireless', turns on volume mixers (I keep off) and stops my typing. It will last for varying periods of time, and then everything returns to normal. It happens on or off the power of the internet, wired or wireless.

  Played HP scan & all checks on okay scanned for all to implement. Everything is up-to-date.

  have screenshots

  product #: HP DDX16 Premium Series

  p/n: NK135AV

  model # X16t-1200

  Windows 7 Ultimate 64 bit

  

  Hello

  Unfortunately there is no firmware update for the capacitive on your particular model - instead, try the following.

  First of all, download and reinstall the utility to control the tone of HP on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45617.exe

  When you are finished, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  This makes a difference in the question?

  Kind regards

  DP - K

• Distnoted and Time Machine problem

  Since the update to El Capitan, I had a real problem with the stability of the iMac.  From time to time - a couple of maybe days, three times a day, maybe - it would just freeze with BBOD on the login screen.  So, in general, after wake from sleep or screen saver.  Execution of SSH on the iMac would show distnoted clocked at > 380%; kill that process would be to release all.  He seemed to be repercussions for this purpose - for example, Time Machine, notifications would stop appearing - backups work (depending on the Console) would simply not be notified.

  Anyway, I actually had my TM drive disconnected for more than a week now, and the problem occurred.  So it seems to be one of the three possibilities:

  • bad interaction between distnoted and TM or processes
  • defective drive.  It's a mobile hard drive from Lacie P9223 (but I also have a second desktop Lacie drive that causes the same behavior).  Disk utility shows no problem with either of the readers.
  • bad driver/firmware.  Maybe... in light of the same manufacturer.  I tried the update of the LaCie firmware but it just does not recognize the plugged into readers - I assume that the update is for one or more different models.

  Short run out and buy another drive from a different manufacturer - and who knows how different the internal components are really - someone has an idea how I could continue this?  Everything was ok before the upgrade; I remember that with a previous version of OSX external drives popular of some manufacturers stopped working, I had this problem at the time.

  Determine if the same problems occur when running in "safe" mode: OS X El Capitan: start in safe mode