fast reading
Fast playback speed
Hello
1 are you facing this problem with Windows Media player?
2. is the specific question in a special music currently playing file?
3. deal with this problem during the playback of an audio or video file?
4. what was the recent change in hardware or software performed on the computer before the question?
Please post the requested information for a better understanding of the issue.
For more information refer,
http://Windows.Microsoft.com/is-is/Windows-Vista/change-playback-speed-in-Windows-Media-Player
I hope this helps.
Tags: Windows
Similar Questions
-
Hold the pitch on scrub and a faster reading in hearing
Is it possible to do this?
It would be SUPER useful for editing podcasts, long stuff form in general.
I see that there was an update for first allowing for this - but I can't find it in hearing.
If this has not been developed yet, please, please put it on the list of urgent features. This would save me tons of time.
Thank you!!
-Colin
You can listen to your audio through double speed but normal pitch using the Speed Up preset effects/time and Pitch/Stretch and height. You can hear it without making the audio using the preview to play in the scope pane and Pitch. In addition, you can use the F8 keyboard shortcut to place markers in the audio waveform as you play at double speed.
-
USB port with reader of flesh in dosen't work in format ReadyBoost
Flesh of 4 GB disk used on USB for ready boost on Windows Vista Premium generates this massage: device is connected to an unsupported interface. Ready boost is to boost the prossesing power. I have updated BIOS and run Microsoft Fixit without change. I have no idea what this interface, or what to do about it. Prayer does help. Thanks to this smart one that can help you.
Hello
There is a chance that the drive that you want to use is too slow or has a problem of memory even if
It passes the speed control (many have a quick memory in front of a lot of memory slow and those
will pass the speed control but will not work correctly). See the end of this message for car
recommendations.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices
Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
It RIGHT CLICK and UNINSTALL all. The device is your thumbdrive (s) or similar.Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems=================================================
DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
many of them are or stretching at least the truth. Look at the sides of the player below and buy
a you know is FAST.
storage. And you need a fast reader.ReadyBoost - list of speed Flash memory
http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/How to find the index of ReadyBoost speed
http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/USB Flash Drive speed - driving tests size
http://usbspeed.NirSoft.NET/http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk
http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Sound plays back faster look like "Chipmunks" of the 1960s. How can I slow down audio?
I found out on Facebook that video that I took did not come through a longer with audio playing properly, but instead all audio is accelerated. I tried online radio and other audio sites with all the sound speed. How can I fix this.
Hi Beverlybelle,
Welcome to the Microsoft community. According to the description of the sound problem faster reads on Facebook.
· Did you do changes on the computer before the show?
· You use Internet Explorer? If so, what version are you using?
· The problem occurs with all online sites?
I'll help you with this problem. I suggest you follow the steps in the article.
Tips for solving common audio problems
You can also read these articles for more information:
Sound cards: frequently asked questions
I hope this helps. Let us know if you need help with windows.
-
Hi, we move to ESXi v5.5 and currently have for most blades IBM HS22/23 servers.
I would like to understand what is Flash reading comes back and use. During the review of the current literature, I do not understand what it is and what materials it applies. Can someone just explain frowhat type of material, she applies and benefits (without URL to docs)
Thank you
The long and short of it is Vmware puts another piece on the hypervisor requesting your VM I/O buffers SSDS Rapids or flash cards for faster reads/writes of your San. An easy way to think of this is that if you have already configured a disk to disk-to-tape configuration. Dump you everything on the drive first for speed (several jobs at the same time, writing more Rapids, ect, ect), then send it to tape. Its kind of the same idea with Flash Read Cache. e/s of the VMDK is buffered or sent to the flash cache and sent to the San to increase performance.
Page 6 of this pdf wmare has a good diagram of it:
http://www.VMware.com/files/PDF/vSphere_55_Flash_Read_Cache_Whats_New_WP.PDF
Hope this helps
-
New on Apple computers - Question on the use of the memory (RAM)
Hello
I recently bought a rMBP 13 "with 8 GB of RAM. This is only my third time (I started for the first time last night). Here is a screenshot I took of the memory usage after starting it on for the first time. My question is: is it normal to see that most of the memory is in use, even if I only have Safari (1 inactive tablet on the homepage of Google) and open the activity monitor? I'm afraid that this is rare and not have a lot of wrong answers online.
Second question, if someone has knowledge: 8 GB of RAM is good enough to run software such as MATLAB, AutoCAD and SolidWorks? Or 16 GB would be better? I still have time to exchange the rMBP.
ElCapitan is designed to use as much RAM as possible at all times for efficient operation. She will move to a video buffer, operations of common files, etc. in the RAM and the y keep in case he should run again. CBS will move embusked operations out of RAM if new operations is displayed.
As for "enough RAM for your planned tasks", 8 GB might be enough, given the fast read/write of the SSD and the very fast moving data in the SWAP file on the SSD. But if you have any doubt, you have 14 days to return without any doubt and re - buy a Go 156 system.
-
Looking to update my first internal hard drive 2011 MBP
Instead of recently updated to a new external drive.
I thought it may be time to update HDD internal (500 GB) original on my MPB.
I have 8 GB of RAM and internal light enough to keep my drive in without worrying about storage and applications.
Everyone updated their MPB HDD with a 7200 RPM disk or an SSD?
If so, what drives internal you would very recommend?
Search for better performance and faster read write time.
My 500 GB drive is barely filled. There are currently about 150 GB of data used.
Much appreciate your comments and experience once the internal drive has been updated.
Ant case 2.5 "HDD or SSD will be compatible with your MBP. Here is just one example of what is available:
https://eShop.MacSales.com/shop/hard-drives/2.5-notebook/
Maximum capacity at the moment is 2 TB, enough for almost all users and by eliminating the need for storage of primary data on an external drive. I currently have 1 TB SSD Crucial in my Mbps in 2010 and 2011. Would they change a profound impact on the performance of the computer. If the bank account is fat, install an SSD. If not, faster turns HARD drive will be better, but not as much as the speed difference may suggest compared with the 5400 RPM HARD drive.
Based on reputation, the best currently available SSD is OWC and Crucial. Although I prefer HGST and Seagate HDD, one brand will do that are listed in the link I have provided.
As a side note, your MBP will support up to 16 GB of RAM. OWC and Crucial are the best sources for RAM Mac compatible.
Ciao.
-
Satellite U500-17F: problems with the new HARD drive
Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.
After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)
The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).
It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?
Any suggestion?
ThanxHello
You use the latest version of the BIOS?
Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.In addition, I recommend check you the power of Windows 7 options.
Disable in the power profile that you use power saving HDD.Just a question:
You use the option AHCI in the BIOS?
As far as I know it of possible to use either a compatible SATA AHCI mode.
AHCI must be used because this option would use full SATA performance. -
A Satellite Pro 6100 graphics card does not work correctly
Hello!
I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.Now my questions:
1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
2. How can I do this, is there some tutorials, especially for my laptop?
3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?I thank very you much in advance!
LukasHi Lukas
The led flashes as it provides a microcode error!
This is especially if the malfunction of hardware has been detected.
I presume that the replacement of the graphics card is the reason!As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
Looks like that the BIOS cannot handle this new graphics chip. -
After many years using Final Cut Express and to be less good at managing clips and libraries.
I want to start the right way because I finally upgrade.
I want to be able to have 'all' on an external hard drive. 90% of what I will be on my desk, but
Sometimes I want to work on the laptop. I use btw, El Capitan on a 2012 GM 16 iMac and Air 2011 RAM.
Can someone guide me to do the initial set-up correctly? Preferably from the old windows
Final Cut are obviously not the same, and if I've been trolling and looking on Google, I am less confident in
some of the information I read specific to this question. I only want to do this the right way, the first TIME.
I'll buy the software this weekend and get started!
Thanks in advance,
Dana
PS A few tips on how to install the software on my two computers? Y at - it something for her?
P.S., Download the app from the App Store. Copy it from one machine to the other. Don't forget to run the download of additional software on both machines. It is not that big. For most of the additional codecs.
The easiest way to do what you want is to use what is called the managed media, so your media in contained inside of the whole library. Get a good external fast reader. Make a new library for each production. Save the library on the external media player. Default library properties is run, media if you are really good to go as soon as you do in the library. Everything that you import is in the library. Just take the reader to a computer machine. The only things to watch are elements like fonts and plugins and other who could be on one machine and not on the other. Everything for the production, the original media, optimized media, make files, proxies, regardless the trip with the library.
-
manage my hybrid HDD/SSD drive with my new Y50
new Y50 with them on board the band
- NVIDIA GeForce GTX 860M 2GB
- Intel Core i7 4700HQ (2.40 GHz)
- 8 GB memory 1 TB HDD 8 GB SSD
When I got to the machine, it was divided into two discs:
Windows8_OS (C 887GB)
Lenovo (D 24.9 GB)
I don't see any SSD drive in the eplorer or the computer management utility. I want to understand what is stored on my SSD and use better cela for optimal performance. I might want to run OS/games/applications of the SSDS to get that fast read times.
Could someone explain to me how to get this set up, OR if it is already set up to explain how to see is performance?
I am very please to join the family of Lenovo!
Please notify.
SDS + hard disc all the appliance is located. It is known as a SSHD by Seagate. The SSD part is used for caching only... It is not accessible by users. Then don't worry in this regard.
-
Currently, I am trying to log readings of DC voltage with an AA battery in an ASCII using LabVIEW 2009 of SingalExpress file and the USB-4065 digital multimeter (DMM). I have two stages:
(1) acquisition of Signal > voltage DC using DMM
-resolution 4.5 with 3.333333E the value-5 sampling period
2) save in ASCII
-The value to add to the file, delete the file after each race
Faster reading, I can get is a data point written in the ASCII file every eighth of a second.
Furthermore, I am new and software OR LabVIEW, the LabVIEW SignalExpress software I have is only for evaluation as it was included in the CD of the driver for the USB 4065 DMM.
- Max (30 000 samples per second) sampling rate is only achievable by a LabVIEW VI?
- Don't I have the wrong settings for DMM step?
- Is it because I haven't activated SignalExpress and am only using the evaluation version?
Thanks in advance for any help!
Hello Lukos,
You are assuming that you need access to lower level functions in order to obtain the higher sampling rates. In order to get these speeds, we need to disable some settings that are not accessible via Signal Express. You can create a VI and then use a step VI call in Signal Express to stay in the same environment.
Kind regards
-Travis E
-
DAQmx showing not readings to multiple channels
Hello
I am trying to acquire values of temperature of 3 consecutive using a task DAQmx channel as shown in the attached photo.
I have a loop of producer-consumer for fast reading and writing samples in a file.
To specify the channels, I typed in the box connected to a terminal of "physical channel" (not shown in picture) as follows:-SC1Mod2 / ai2:4. This is to acquire a reading of analog channels 2, 3 and 4. The program must then write a file reading on channel 3.
The code works perfectly if I purchase samples of 1 channel only.
When I try to acquire multiple channels, I don't see readings on one of the task of acquiring Wired Digital indicators.
I would appreciate your input on what might be wrong with the code.
Thank you.
kumv10 wrote:
The broken wire seen in the photo is the result of adding more channels to the task of acquiring. I managed to get around this by specifying a different, but even with an intact wire data type, the program is not displayed readings since the 2 remaining channels.
Instead of use for dynamic data Type, then the channels Split, just use an array of Index to get your three values.
-
Chrashed Application LabView sometimes - OPC, DSC, database
Hello
I have a problem with LabView. IAM using 8.6 with DSC. I have an OPC Server with 400 Variables to read a 40 to write
My first try was the connection to the server via Datasocket. The reading 400 variables was very fast, but writing 40 variables was very slow. Each write cycle takes 10-30 s. I need now about 300-500 ms. a second is also ok, but no more.
After that, I created a mutual FUND I/O-Server in the library. I have create 10 variables in the same Libarary. I connect variables on the EVS to the IO server it works very well. Fast read and write. But if I use more than 6-8 variables to write shared variables that LabVIEW crashed or do nothing.
So I used the right click on the digital control - data binding - Data Binding selection-> socket Data. On the server that I am looking for the variable on the opc server. (Example pathpc: / / localhost/BACHMANN.) OPCStandardServer.2/DeltaPOx.DeltaPOx_DAQ. DeltaPOx.DELTAPOX__HostVorg_cont_MFCVorg_C2_02_soll). It works very well. I finished the project a make an exe file. Question: the communication going on AES or directly on the opc Server?
Now the problem:
(1) sometimes without any reason the connection with the SPS crashed. I show the LEDs of the PSP on the buttons a numerical indicators a green led switches to red. With customer Softwarefrom the producer of SPS, the communication works very well. If the SPS an OPC server doesn't always work. Even a reboot of the LabView program do not work. I have to restart the pc. After the reboot, it works well.
(2) once the database crashed. I use the Hyper trend to show trends in the variables. Sometimes if I open the tab with Windows Hyper trend data displays the Date of January 1, 1904. That I have to restart the database. The last time, it doesn't work and I had to rebuild the Application host.
(3) I get an error message "Runtime Error... Tagsrv.exe. I read that this message comes only if something tried to close the database. I have the error at startup of windows messages. Sometimes, after a few minutes or hours, or days. I install LabView 2009 now. I hope that the failure is complete.
I guess that something with the database or the OPC server is incorrect. Maybe someone has an idea.
Sorry for this stupid English :-)
thx for the help
Martin
Thank you very much!!!
It works for 5 days without crashing. I hope that this always works, even in a year :-)
THX Martin
-
How to manage the data after the serial com port?
Hi all
I'm new to labview and serial communication. I tried to receive data on external device labview (pic18f452). It's done, but I am getting data as strings. If microcontroller gives "11.25", in labview each letter is delivered to a different as string ("1""1" "". "") "2" "5").. How can I manage data... to make it unique as 11.25, a number constant.
If possible, join some examples with your answers... Thanks in advance.
It seems that you read too fast, read up what an endcharacter probably puts the characters in a string that can translate the string of numbers conversion routines in the palette of the chain.
Maybe you are looking for
-
Problem with usb boot on Satellite A-50
HelloI had a problem with a usb tip. When I insert a usb key, I can't start my computer by usb. I selected the option of a disk boot, but doesn't run. I have a "Satellite A-50-522. I have to update the bios? Greetings,
-
I want ot s open .pdf in preview, not Adobe Reader. Can I do this without uninstalling the drive?
-
How can I get Outlook 2003 and 2007, to leave a copy of message on the server?
How can I get Outlook 2003 and 2007, to leave a copy of message on the server? I use Outlook 2003 and it keeps pulling messages out of my email account, I want at least a copy to be left there so that I can access it from anywhere and not just a comp
-
Type questions NMH405 Impressions after the first few days - and a few beginners
Hi all, after some research I made the plunge and acquired a new NMH405 (I really wouldn't have no existing "NMH400" i.e. no discs). I removed the 500 GB drive and added two new drives 1.5 to WD Green Caviar and set up in Raid-1 after a few messages
-
On Vista Home Premium system crash
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideasharddrive. My Toshiba Satellite has blue screens more than all my other systems combined. Now, all the startups go through a form any file