FavIcons not showing correctly in the file Explorer, but display correctly in Internet Explorer.

Similar Questions

• Boot Camp Windows does not show Macintosh HD in file Explorer what should I do?

  Hello

  I installed windows on boot camp 10 but windows file Explorer does not show my files on mac and I can't access them what should I do?

  You need to install the boot camp software in windows to get this working

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• WMC on Xbox 360 shows "video error: the files needed to display video are not installed...»

  Front when you use Windows 7 Xbox 360 everything has worked well.
  Upgrade to windows 8.  WMC can play programs recorded on PC, but when I try to play recorded shows with WMC of XBox 360, I get the following message

  "Video error: files needed to display video are not installed or not working not properly." "Please restart Media Center and or restart the computer.

  I don't have any codecs installed
  I tried regedit change suggested that for vista, does not work
  I tried the deactivation/activation of WMC on the PC, does not work
  Restart the PC does not work
  Restarting everything doesn't work

  had this error the other day, that it drove me crazy. You know what fixed it? Disable my firewall. For some reason, he decided to start blocking my xbox. I hope this helps.

• images do not showing in view mode for photos in the file Explorer

  I used to be able to see small images of my pictures when I went to the file Explorer.  Now, I see just a picture of the designated as default program to open jpg files. How can I change in this option?

  Hi Diana,

  Are you aware of any changes made to the computer before the show?

  A thumbnail is a small preview of an image version.

  Here are some steps that you can follow:

  a. open the folder containing the pictures and click on the view tab.

  b. click the Options button to the far right.

  c. click on folder and search options this opens a menu of options.

  d. navigate to the view tab and uncheck the box always show icons, never thumbnails

  e. check the box that says the view of the file on the photos icon.

  f. click on apply and OK.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• During a conversion attempt has us page to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  During a conversion attempt a webpage to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  Hello

  We could not see the attachment. Let me tell you how you can attach the file.

  1 - Select the icon of the image of the top toolbar.

  

  2. then click on "select a file".

  

  3 - Select the image you want to download.

  

  4 - Click on "insert image".

  

  I hope this has been helpful.

  Thank you!

  Shivam

• Lignthroom CC 2015 .dng files, HDR and pan do not show thumbnails in the OSX Finder, Ditto with the extract to DNG 7.1, but extract format DNG 5.4 the thumbnail is ok. Ditto in On1 browser?

  Lignthroom CC 2015 .dng files, HDR and panoramic do not show thumbnails in the OSX Finder, only a black rectangle or logo DNG, Ditto with extraction to DNG 7.1, but if to extract the format DNG 5.4 vignette is ok. Ditto in On1 browser? Is this a bug?

  Thanks for the test on Windows too.

  Yves/CH

  Apple has not updated their libraries to support raw yet to be able to understand the new 16 - bit floating point dng files created by Lightroom. If the Finder cannot generate a file icon to show you. Usually the DNG support built into OS X only knows how to treat direct dng files conversions of files from cameras raw is already in favor.

• Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Hello

  In Windows 7, the AllUsers folder is not a real file.

  It is a symbolic link that redirects to the C:\ProgramData folder.

  ProgramData is not hidden, by default.

  The correct syntax for the Attrib command would be,

  C:\>attrib h ProgramData

  You can view all files by going to the tab options\View Organize\Folder and research.

  In the section files and hidden files , place a check mark in the Show drives, folders and hidden files.

  Click Apply/OK.

  Concerning

• My laptop does not shows correct date and time... and when scrolling a page it scrolls very slow

  Hello

  I'm having a problem with my laptop. It does not shows date and the correct time. I put it to update manually, and every time I restart or turn off my laptop and reopen it shows as in the year 2007. Please help me... And when I scroll a page, it will slow real lines showing a... As half page goes up. My touchpad is not working properly it's button are good work. I've updated with synaptic driver, but it displays error as there are two or more materials

  Hello

  -What is the limited issue with scrolling of Web pages or all Microsoft-related applications (Excel, Word, One notes, etc...)?
  -What version of Internet Explorer is installed on your computer?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: For the synchronization of the clock of your computer problem, I suggest to return the article mentioned below and check if the problem persists.
  Synchronizing your computer clock
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_date_it_overview.mspx?mfr=true

  Loss of the time in a computer settings might also be due to some problems in the system (Input Output) BIOS of a computer database. You can also check with your computer manufacturer to see if there is no updated BIOS for your computer model.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   
  Step 2: For the problem with scrolling of Web pages, I suggest to see the link below and check if the problem persists.
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091
   
  Step 3: Run the Microsoft FIXIT from the link below and check if the problem persists.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

   

  Hope this information helps.

• FTP - open the site in question from the file Explorer.

  Hi all

  I am here today with a common question, which seems to have been answered several times, but none of the above worked for me.

  My problem is the following:

  • http://prntscr.com/39ebdv

  It's my current installation:

  • Ubuntu Server running 12.04 with installed ProFTPd.
  • Windows 7 computer (desktop) and laptop.
  • Windows File Explorer.

  Here's what I tested, and what are the results I get:

  On my two main computers, each running Windows 7, I get the image displayed above. (For those of you who cannot see the image, there are a stain on the bottom of this question). However, I tried it on two other computers in my LAN, and they work. I also tried on a computer in a different city, and it works. My FTP address is the following: "ftp://ftp.marshalldrive.ca" without the quotes.

  Here are some solutions I've tried:

  1. with the help of Internet Explorer (my current browser is Google Chrome), pressing 'Alt - view-> in the file Explorer view', I get the error displayed.

  2. turn off my firewall and my anti-virus, same results.

  3. go to the file Explorer Windows and in the address bar: "ftp://ftp.marshalldrive.ca" (without the quotes)

  4 import a registry that looks like this: http://prntscr.com/39ee2j (code shown below), using the above, didn't work.

  5. copy of the record of one of the other computers to work.

  6. release of Google Chrome and using IE.

  That's all.

  When you use the browser (IE, GC, PSC), I can type in ftp://ftp.marshalldrive.ca, and it works. However, it does not work when I try to display in the folder view. I get the above error.

  Why am I trying to do?

  -I know FileZilla exists and many others. I like the simple layout of the windows Explorer, and it is easier for the elderly to use to use F.Z. I also prefer not having to install anything and using the built-in module.

  IF anyone can help me I can help you in return. I am creating a file storage system, and I can give you free space on my server.

  No Image error:

  "Windows cannot access this folder. Make sure that you typed the filename correctly and that you are authorized to access the folder.

  Details:

  A connection with the server could not be established. »

  No Reg Code Image:

  "

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\ftp]
  "ShellFolder" = "{63da6ec0-2e98-11cf-8d82-444553540000}".
  'Source filter' = "{E436EBB6-524F-11CE-9F53-0020AF0BA770}".
  "URL Protocol"=""
  @= "URL: File Transfer Protocol.
  "AppUserModelID"="Microsoft.InternetExplorer.Default."
  "EditFlags" = dword:00200002
  'FriendlyTypeName"="@C:\\Windows\\System32\\ieframe.dll,-905 '.

  [HKEY_CLASSES_ROOT\ftp\DefaultIcon]
  @= "C:\\Windows\\System32\\url.dll,0".

  [HKEY_CLASSES_ROOT\ftp\shell]

  [HKEY_CLASSES_ROOT\ftp\shell\open]
  "CommandId"is"IE. Protocol ".

  [HKEY_CLASSES_ROOT\ftp\shell\open\command]
  "@="\"C:\\Program Files\\Internet Explorer\\iexplore.exe\" %1 ".
  "DelegateExecute" = "{17FE9752-0B5A-4665-84CD-569794602F5C}".

  "

  Hey Tyler,

  Please contact the Microsoft Community.

  I would have you post in TechNet for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Let us know if you need anything else from us.

• Envy 17-j020us, cannot cut/copy and paste in the file Explorer

  I can cut/copy and paste the url and the text to speech, etc, but I am unable to cut/copy and paste files in Windows File Explorer. I tried malwarebytes and virus programs running. HP support has tried to access remotely to identify the problem without success. Y at - it another option in addition to a factory reset or restore point? Thanks in advance for any help.

  Hi jdavis33811,

  Have you tried the three methods of cutting and pasting? Using the keyboard shortcuts CTRL-X CTRL-V, right click on the file and selecting cut, then using the tape from the file Explorer / File menu.

  If you have tried all three, the next thing to try is a boot minimum to see if something is in the background to block the order. A clean boot loads Windows with the drivers and the minimal software. This link of Support technique Microsoft will show you how do it.

  Once you have made the clean boot try three methods of cutting and pasting. If it works the next step is to go back to msconfig (see Microsoft link above) and enable half the services you shut-off valve to the clean boot. Then try to cut and paste again. Keep half of the remaining services that allows until you cannot cut and paste, then disable half of the services that you just active. This, until what specify you what service has problem.

  If after all that you still have a problem then the next step would be to backup your files on an external hard drive or a USB flash drive and then doing a complete System Recovery.

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player giving meed msg writeasx supporting not attempt to play the files

  Windows media player giving meed msg writeasx supporting not attempt to play the files

  Windowd Vista Home Premium.Windows 11 media plaer. Notice to lovers?

  Hi DavidCrowder,

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. when exactly you receive this error message?

  2. have there been recent changes to the computer before the show?

  3. it's happens on a particular file?

  4. What is the full error message do you get?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

• In Windows 7, I wonder how I can delete my history folder in the file Explorer window. There are folders there appears no longer exist.

  Looking at my history of folder in Windows 7, I see some files that no longer exist on my PC, but still appear in my story.  I would like to know how to get rid of them.  I tried to look in the internet options, as deleting the history of IE is the closest thing to you that I could find, but there is nothing there to affect the file Explorer.  Also, I couldn't find anything in the folder for this options.

  Hi DaNorm,

  Welcome to the Microsoft Answers community.

  Go to the following location on your computer and delete the contents of the historical record. And then check if your problem is resolved.

  C:\Users\username\AppData\Local\Microsoft\Windows\History

  AppData is a hidden folder, so you will need to follow the steps below to view it.

  1. Click Start and then click computer.

  2. click on tools (if you are unable to see Tools option, and then press the ALT key on the keyboard).

  3. Select folder options.

  4. on the view tab, select Show hidden files and folders (in advanced settings)

  5. now click on the Ok button.

  For more information visit http://windows.microsoft.com/en-US/windows7/Show-hidden-files

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396