Replacing the fan T60P 2007

I have a T60P which operates 4 screens including one on the IBM ThinkPad itself. I am absolutely delighted, because I also carry it in my backpack.

My fan is noisy and I think I should replace security. I clean it from time to time with an air blower which it calm down a bit.

I would like to replace the fan, never done it before, or fact whatever it is inside a laptop before, but am technical and have all the tools having worked in the industry of the TMT (but not to support).

My challenge is that Lenovo doesn't seem to make sense and find another is caught in a tangle of reference numbers.

My reference coordinates are

T60P

29R7077

Type 2007-FBG

S/N L3 -* 06/04

Do I need any other reference to locate the right replacement?

I am based in the United Kingdom.

So my question is how and where to a spare part of sources? and who are suppliers of quality?

Thank you for your help

Moderator Note: serial number removed for the protection of the Member.


Tags: ThinkPad Notebooks

Similar Questions

  • Replace the fan, now crazy laptop :(

    Hello world

    I replace the fan on a macbook pro 11 Middle, disconnect the battery in the first place, the connection of the fan and remove the 3 screws.

    Now, cannot start the mac via the battery, only the main power. The battery is not available.

    main drive SSD, but I think, as the use of a 30-year drive, now

    now the fan is at full speed, ages to load, cursor very foggy, can't open anything.

    Check the use of the processor and clocked at 93% +.

    Core is up and dow, 113% to 300% +.

    Check all connections, the pins of the battery. Does smc several times, nothing works.

    Any ideas?

    Thanks in advance

    Unfortunately, it seems that you may have caused damage to the battery connector, fan sensor and perhaps some damage from static electricity to the motherboard.

  • Satellite A210-199 - how to replace the fan?

    A Satellite A210-199 of the fan does not work, where to replace in Donetsk (Ukraine)?

    Hi romantik4488,

    On the Toshiba site, you can find a list of all authorized service providers. Technicians can replace the fan and order a new one. You can search here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Replacing the fan isn't easy because many parts must be removed, then the best option is in touch with an authorized service provider.

  • Replacing the fan on Portege R200/205

    Hello Forum,

    My Portege R200 (R205?) fan no longer works. I searched a spare part from ebay and discovered,
    that a fan costs between 12 and 25, - euros.

    http://shop.eBay.de/?_FROM=R40&_trksid=M570&_nkw=R200+l%C3%BCfter

    ... it of cool, but how can I know, type I need?

    now, we want to replace the fan:
    -------------------------------------------
    ... and ask myself questions:

    1. what I do (disconnect) before changing the fan?
    2. what I have to remove all coverage and the disk, as described in 4.9 before I could change the fan?

    Best regards
    heinetz

    Post edited by: ADMIN
    Inadmissible link is deleted.

    How to find the right part? I don't know the man. Either you contact the nearest Toshiba service and ask for help. They can check the Toshiba database and give you the exact reference, or you must disassemble check and portable all if fan has a sticker with part number.

    Please disassemble your laptop just if you know what you're doing. Before you start to do this unplug the AC adapter and remove the battery.
    According to my experience for the whole laptop fan replacement must be dismantled. Fan has small connector from the motherboard to the power supply and it must be disconnected from the motherboard.

    Be careful with this. Design of portable computers is very sensible and small mistake can result with parts broken as cover or plastic small operators.

    Please think twice before you start to remove the screw. :)

  • Equium M50 - how to replace the fan?

    Hi all.

    I don't know much about computers, and this is my first post. My Equium M50-192 starts to turn after about 15-20 minutes. It is very hot and I can't hear the fan more. I guess that's the problem so to replace the fan. But how can I do? How do the fan?
    And it is easy to do, or should I leave it to an expert?

    Thank you very much

    Hello

    It is not easy to explain in a few sentences. Computer laptop disassembly procedure is quite complicated and if you don t have experiences you should not even think about it.

    The second important thing is that laptop procedure disassembly should be done following the rights steps in Maintenance manuals. This document is not a public document.

    So if you think about it maybe you should seek professional help.
    What do you thing about that?

  • Replacing the fan X 230

    Hi all

    I am reaching out to the community to see if someone has had to replace the fan on their X 230.

    If so:

    -Where did you buy the part?

    -This manual is exactly what you had to do? http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/0b48666.PDF

    -Do you need to provide your own thermal paste or does the unit?

    Thank you

    Drew

    Good day and welcome to the community.

    I had the good luck, ordering parts maintenance directly from:

    http://www-304.IBM.com/shop/Americas/webapp/WCS/stores/servlet/default/PromotionDisplay?promoName=PA...

    There is also a toll-free number on this page, if you need assistance.

    While I have not replaced a X 230 heat unit, I did so on a X201T and a 220 X. The procedure described in the manual of the material is accurate. Note that the system board must come completely as the thermal unit is on the underside. If you are under warranty, you can communicate with the Service first, before getting into your machine.

    Finally, Yes, the thermal units, I bought directly had thermal grease applied previously.

    I hope this helps a little.

    Kind regards.

  • Model: G6-1D98DX, refurbished: renovated pavilion laptop g6, replace the fan with what?

    When I powered my laptop Pavilion G6 refurbished, it gives a disturbing message on the fan turns not and the processor of cooking and automacially stops in 15 seconds. OK, replace the fan.

    By the? appropriate? HP 'Maintenance and Service of Guide' (Doc PN 649111-002), I took part BUT Guide HP, the processor heat sink is held by 7 screws... only it renovated its heatsink is a model of 4 screws, and the motherboard was ever available for 7 screws.
    How to order the appropriate and/or fan-with-heat sink fan? the fan-with-heat sink seems to be a unit

    use data created on the fan or radiator Assembly to try to find a part on google or ebay.

    http://www.eBay.com/ITM/new-OEM-HP-Pavilion-G6-G6-1000-series-cooling-fan-with-heatsink-641024-001-4-pin-/251637960612?hash=item3a96ca8fa4:g:dTsAAOSwq5lTmneN

  • T60 8741CTO - replacing the fan

    When replacing the fan. can I just replace the plastic part (fan himself) does not replace the radiator? I order a fan on ebay and I hope that I can separate the radiator fan. Any clue?


  • DV7-6153er replacing the fan

    Hello! After 3 years of use, I found 2 cracks on the cooler fan blades. I need to replace the fan, but I need to know, to do for all portable computers dv7 series coolers are identical and compatible (for example - I found in the cooler shop for $ 4 and it is marked as compatible dv7 6000 series, it will be compatible with my dv7 6153er)?

    Not the series 6xxx even are will be because cpu/gpu configurations of different fan/radiator installation.

    Also doubt $4 many fan will buy at least that he used a cheap copy of China.

    Quality original nine fan is going to be $ 9 to $ 19 while waiting on luck & how much effort you put in, usually if you have the fan brand name & model numbers, you can track down cheap quality so that if the price of sourcing by laptop model has a premium...

    http://www.eBay.com/ITM/original-new-CPU-cooling-fan-for-HP-Pavilion-dv7-6152sf-dv7-6153ea-dv7-6153er-/121153655858?PT=US_CPU_Fans_Heatsinks&hash=item1c35521432

    Be careful as the Chinese copy or without fans no expensive name are terrible...

  • How to replace the fan on HP GB Notebook PC

    How can I find and if necessary, replace the fan on my laptop G62?

    Hello

    Please you finf the manual link given below might help you. Check procedures Chapter 4 removal and replacement of page 80.

    Maintenance and Service Guide

  • Compaq Presario CQ56: Try to replace the fan, do I need radiator?

    Hello. I am trying to replace my fan it starts to go.

    I need to replace the fan AND the heat sink (they appaear to be attached to another)? Is it possible I could buy just the fan itself, simply remove the old fan heatsink and then attach it to a new fan? Or would remove the damaged radiator? If I can remove it and reattach to another fan how what to do?

    The manual shows the part number is 606573-001, but I can't seem to find where to buy with a heat sink in any case. I find only individual fans and it seems not can I buy it separately the radiator. Where my question.

    Thank you.

    Usually, the fan is held in place with a few screws. Simply remove, remove the fan and replace it with the new fan.

  • HP Pavilion G6 - 2148TX Power Up after replacing the fan problem

    Hello

    After replacing the fan, I have a power issue with the laptop. Basically, the laptop will only fuel on the power cable disconnected to the motherboard. It is by mistake only after the fan has been replaced and everything got back together, I noticed that the battery was not charging.

    I then opened the machine and reconnected the power cable to the motherboard and nothing - no power.

    When connecting to the source of power with the battery in place, adjacent to the power supply lights in WHITE then remains ORANGE and will not. Seeing no other, no fan noise, nothing.

    If I remove the battery, the adjacent to the power supply led in WHITE and white rest however not feed either. Same agin, no LED, no fan noise, nothing.

    Now, I opened the machine upward and disconnected the power from the motherboard. Put it all back together and that the laptop starts as usual with the battery and it works very well. (Well until the battery runs in any case)

    I'm looking for some advice on what the issue could be given my conclusions.

    Thanks in advance.

    Well, I've now solved the problem. I bought the DC power cable that connects the motherboard to the socket on the laptop. $15 on eBay.

    Connecting the supply cable to the Jack of the laptop, the 'white' and is LED stayed on. The battery was not installed at the time. With a deep breath, I pressed the power button expecting anything to happen, but when he lit a big smile appeared on my face.

    The laptop booted up normally.

    I then install the battery and the battery indicator showed it to load. Everything is good and a son of 18 very happy. The fault was as expected according to my previous email. I hope this helps someone in the future, shame on HP response was off the mark in light of the original explanation and clarification post. But appreciated nonetheless.

  • Replacing the fan Pavilion dv6

    Hello! I found the manual for my computer but I am not sure how deturmine if he has a discrete or UMA memory in order to order the part to replace the fan.

    The fan in the summer in place for some time, leading to overheating of the issues and has now finally stopped working altogether

    I'm on a Pavilion dv6-6140us, running win 7

    Hi TheDragonGirl,

    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I saw your post about if your model is discrete or UMA memory. Pavilion dv6-6140us specifications , it has AMD Radeon HD 6620 G Discrete-Class graphics card.

    Thank you

  • How to replace the fan on a hp mini 110-3002sg

    is there a video how to replace the fan?

    Thanks in advance

    Johann

    Hi, Johann:

    There is only a maintenance manual.  Please see Chapter 4.

    http://h10032.www1.HP.com/CTG/manual/c02481106.PDF

    Paul

  • Replacing the fan

    When you run Techtool Pro on my MacPro (2009), it shows a pair of RAID hard drive and one does not "boostA fan." I think that it is the fan in the housing of the processor.  Is this easy to replace and there at - it a store that sells the replacement part? Apple apparently no longer ships it. In addition, what is the danger if the fan is not replaced?

    They are within the CPU radiator Assembly. See:

    http://Pindelski.org/photography/2013/07/06/Mac-Pro-2009-part-x/

    This manual gives good instructions for MP 2009.

    http://Tim.ID.au/laptops/Apple/MacPro/macpro_early2009.PDF

    A fan of boost failed will result in higher temperatures of CPU. If they get too high can cause problems like kernel panics

Maybe you are looking for

  • Cannot .jnlp file open when asked to open with the browser web firefox in ubuntu 11.10 using firefox 6

    After the upgrade to ubuntu 11.10 the firefox browser 6 download and open from the website interactivebrokers .jnlp file. Usually, I go to the IB website and download the tws.jnlp file that opens in the browser web firefox. But now when I click on op

  • resample wave information

    Is there a way to re - sample vague information? I know that I can read a wave file to 11Khz and then write information to 22 kHz or 44 Khz.  But what I want to do is read in the file of 11 Khz, 22 Khz to upconvert, perform processing of the file, ma

  • Open the Panel front of the Subvi, which is called by reference in the EXE

    I want to open the façade of a Subvi when it is called. This sub - VI will open the façade of a Subvi third level. So, I want to go back to the main.vi the output of the subVIs.I can do successfully in the development environment.I call on the refere

  • Could not find the same code for Passfilt.dll in the Platform SDK

    Hi all I am unable to find in the Platform SDK, how documented here http://msdn.microsoft.com/en-us/library/ms722439.aspx, the sample code related to the password filter (Passfilt.dll). Can someone help me? Thanks in advance, Zaic

  • Error installing mouse keyboard Center

    I try to use a MS Sculpt Mobile Mouse on Windows 7 Enterprise 64-bit system.  I downloaded MouseKeyboardCenter_64bit_ENG_2.3.188.exe.  When I run it I get a message that says: "cannot install this software because your computer does not meet the requ