Faxmodem for HP8-1070UK

Similar Questions

• Incompatibility of Windows 8 for HP8 - 1360t

  I ran the upgrade of Windows 8 compatablility assistant and I have two problems.

  1. Broadcom bluetooth software

  2 inter (2) USB 3.0 eXtensible controller driver.

  That's exactly what came on the report in the wizard. These two elements of is out as incompatible.

  I did a search of support & drivers, and there is no match.

  How can I fix it? I can't be the only one with this problem because I didn'nt order something special for my computer. It seems to me that all hp - 1360t I have this problem.

  Hello scottshively,

  You must perform the steps as described above. By updating the drivers before you add Windows 8 media. For example, related controller drivers have this statement in the update of the driver ""-provides the driver updated for upgrading systems to Windows 8. ""

  Updated Windows 8, you may need to update the drivers, but that all will be through Windows Update. You do not necessarily have do them beforehand.

• Bluetooth for HP8-1210

  Hi - checked the specs for my machine and he advised that this pc is compatible bluetooth.

  Yet, as a result of the articles on the site - can not get/see the bluetooth icon.

  How should be done on the activation of bluetooth on the pc.

  Thank you

  Hello

   

  Check if the Bluetooth services are enabled. To do this, follow these steps.

  • Click Start.
  • Type services.msc and press ENTER.
  • In the list find Bluetooth support services and double click on it.
  • Ensure that the service is set to automatic and started.

  I hope this helps.

• TouchSmart 520-1070UK: if I can replace the 802.11n wireless card in my 1070UK 520 for a dual band

  I've been updated by my cable company to a router to speed broadband to 200 'up to '. My old iPad connects to new 5G

  band but the HP Touchsmart is the single band 802.11n equipped Ralink card.

  Can I physically replace or add anything to connect to 5G?

  Hi there @tiggerchris

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for help on how to replace your existing wireless network adapter or add something to support the 5 GHz band. I'm happy to help you with this.

  Service and maintenance guides available and put at level of guides for this system offer no wireless adapters. The simplest solution I can suggest would be an adapter USB dual band WLAN.  There are many benefits to this choice. It is easier to install, it's easy to transfer to another device if necessary, and they can be very economical.

  I'd say a bit of research online for this type of device, to see what is available.

  I hope this helps.

• Upgrading HP HPE H8-1070uk to SSD using the mirror or new installation?

  I bought my H8-1070uk this time last year (Oct 2011) and decided to upgrade with an SSD.

  SSD of choice is Samsung 803, 2.5 inches Sata III 6 GB/s, 128 Gb. including the kit of accessories and Norton Ghost.

  Can we see problems with this choice for my office?

  Important information to take into account for the following questions, it's that I did a restore of complete system only 1 months ago. Recovery system was conducted using disks system recovery DVD created via HP Support Assistant at the time of purchase. I also upgraded from 8 GB to 16 GB of RAM only 1 week ago.

  I want the SSD as a boot drive for my Windows 7 Home Premium 64-bit OS, as well to run my applications of 3D animation; Autodesk Softimage, Autodesk Mudbox and master of Adobe Creative Suite 6 thus than some other apps from day to day. Then use my HARD drive existing as a second car for the media and personal files, etc.

  Copy all my personal files (videos, photos, documents, etc.) on a drive external hard, my HARD C: drive partition is currently at 92 GB used space (I imagine that I might be able to find that a bit smaller) and Partition D: 10 GB 11 GB used.

  My basic question is what would be the best for my system and for the future, to create a mirror using the Norton Ghost software or do a clean install?

  Own Samsung promo videos of the 830 Norton Ghost seems very honest and will create a complete copy of my HDD to the SSD, fair enough.

  However do a few minor readings, there seems to be a fair few who suggest that in order to get the best of the SSD is to do a clean install. I don't really know how I would go to this topic but, would it not as simple as the insertion of the SSD, remove the HARD drive temporarily and then start using the system recovery DVD discs to create the clean install?

  What would be the recommendation of HP?

  Tips, tricks or general recommendations on this process would be greatly appreciated.

  Oh, also is there a slot specific SATA, that I should connect the SSD or are they the same?

  Thanks for your time,

  Steve

  Many before you have tried mirror/clone the OS for the SSD and ran into problems. A search on this forum or the internet should indicate what has been tried and failed. There seems to be no direct way to do what you want. The method below doesn't require activation and reactivation if you change most of your hardware as would be normally will not happen if you are using Windows with a standard COA key.

  It is a completely clean install and will require the installation of the drivers and software HP, if you chose for her, she.

  (1) download and unzip ABR beta for Windows 7. This is the homepage of ABR for Windows Vista. Please follow the section "How to use" for information and instructions on how to use it. These steps also apply to Windows 7. The 'activation' on your original with factory HP OEM Windows installation hard disk backup, backup the backup files in several locations (USB stick, SD card, external hard drive, etc.).

  (2) download your version (the version that has been preinstalled on your HP computer) Windows 7 from Official Windows 7 SP1 ISO from Digital River. Using the built-in Windows 7 CD/DVD burning software, burn the ISO image of Windows 7 downloaded onto a DVD.

  (3) install Windows 7 from your new "Windows 7 disk" to your SSD, following all prompts as needed. Do not enter a product key Windows and do not allow Windows try to scoped. After the windows installation is complete, run ABR 'restoration of activation' to 'install' the previously saved until the product key and the certificate. Verify that Windows is activated, if not activated... repeat "restoration of activation" until Windows 7 is activated.

  Good luck.

• Hp8 - 1010T transfer CD music on USB

  I have a desktop HP8 - 1010T.     I am a very marginally in 64 years old computer.

  I recently bought a new car that has a USB port.  I would take many hundreds of CDs of music I own and put this music on a tiny USB drive.

  Help!  How do I on my PC?

  Thank you

  Mike

  Mike, welcome to the forum.

  You can use Windows Media Player to EXTRACT music from a CD to your computer.  Once the music on the computer, you can insert a USB Flash drive into one of the ports and drag the pieces for her.

  Here's a guide that will help you learn how RIP a CD.  There is a video guide that should help you with the process.  Once you have the music on your computer, it will be in the Windows Media Player.  You can install your USB Flash drive into a USB port and drag the music to it on the right side of the WMA.

  If you have any questions, please let me know.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Upgrade GPU of HP Pavilion HPE h8-1070uk desktop PC

  Hey everybody would be able to tell me which graphics cards are compatible with

  HP Pavilion HPE h8-1070uk desktop computer? I tried to install Asus gtx 750 TI unsuccessfully as the phones was not compatible due to the bios, and now I don't know what card to get.

  Please help, thanks.

  You are welcome.  I'm happy to help you.

  The original video card has a switch that changes the EUFI after-effects.  Your computer has the Legacy BIOS.  The card was recommended to several members of the forum and there has been no reports of problems.  It's good that you're running Win 7.

  If you are uncomfortable with the card you can contact MSI Tech Support for help.  They are the real experts on their products and will be happy to help.  It's good to let them know that you're new on the subject of video cards.  They will understand.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I'll be able to install a new graphics card in, h8-1070uk Pavilion Desktop PC.

  I bought this computer around September/October time last year. No get hurt, the computer is AMAZING, but I can't put up with an integrated graphics card (NVidia GeForce GT545 / 3GB is the default that comes with the system). So my question as I am able to change my graphics card? I have a GTX ready to go GB 680.

  Here are the specifications of your desktop HP Pavilion HPE h8-1070uk. According to the specifications, the motherboard has integrated Intel HD 2000 / 3000 graphics (depending on model) and supports PCI Express x 16 graphics cards. Your system was shipped from the factory with a PCI Express x 16 3 GB NVidia GeForce GT545. In addition, specifications, your system is equipped with a 460 Watt power supply. All the GTX680 I watched require power minimum system assessment of 550 watts or greater. So, Yes, you can replace the GT545 with a GTX680... simply put to the power supply as well. Corsair CX600 is slightly larger than a stock HP power and is highly recommended, but also a favorite forum. For more information, read Guide of Big_Dave of a discrete video card selection .

  Frank

• Ports USB 3.0 on Pavilion hp8 - 1070t does not

  Just bought a HP Pavilion HPE h8xt (also called hp8 - 1070-t) with the player 15-in-1 memory card, 4-port USB 2.0 (front), audio, 2 USB (rear-facing top of page).  The upper part (rear panel) USB ports are USB 3.0.  They do not work.  Device Manager reports "this device does not work properly because Windows cannot load the required drivers for the device (Code 31)." These ports are detached from the motherboard (IPIS8-CH2).  The pilot is reported as < tihub3.sys=""> . HP support wants me to a full recovery, but it's a waste of work of three days that I am not willing to take as every other thing on the machine works.  People tell me that others have had this problem with this device.  Someone at - he found a solution?

  HP support has not been able to find me that the right chip drivers, which gives me sp4787.exe.

  Hello

  When you plug the USB 3.0 on a USB 2.0 device, you should see the following message is displayed:

  

  Now if you do not see this message then the USB 2.0 controller is probably not setup in device management to provide notification.

  You can also download PC Wizard (it's a gift) and it will give you more information about your USB 3.0 controller.

  

  So, how do you know if your USB 3.0 really works your expectations?

  Download HD Tune and the reference device when it is plugged into a USB 2.0 port and a USB 3.0 port. There should be a difference. You may or may not like the difference.

  I compared my USB 3.0 flash drive and it is 60% faster on the USB 3.0 port.

• H8-1070UK: replacement of a graphics card on h8-1070uk

  Help, please. the video card in my 1070uk h8 is a failure so I bought an evga geforce gtx750ti, but when I implemented the pc just made a beep then nothing, but if I put the old card in it starts very well. I have not replaced all the other components of the system. the specs say he needs that 300W psu and mine is a 460?

  Hello

  NVIDIA 460, 560, or 660 should work in your PC.  Just be sure to match the needs of power supply as indicated by the manufacturer of the graphics card.

  Watch the specifications of this model of configuration on demand h8 - 1070t which uses the same motherboard.  HP has a list of HP OEM certified graphics cards that will work in your PC.  Just be sure meet power requirements for a graphics card specific to your current diet of 460 watts. If you have doubts, then install a power supply Corsair CX600 as it will load all the graphics cards listed.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• HPE HP8 1360t DVI connections and two monitors

  I recently bought a new HP8 HPE 1360t directly from HP.

  I finally got around to get set up last night. I like almost everything about it, EXCEPT to try to figure out how to make it work with two monitors.

  Before buying, I contacted HP sales to confirm that this model could support two monitors in extended mode, which means that Office spans both monitors, giving me two times the workspace.

  I have two monitors (1908FP) Dell that I got as part of a severance package from my last job (Yes, I know what you think) and down them as two monitors with the office in extended mode. They have both connected via DVI to a MOLEX splitter. They seem to be of DVI - D Single Link.

  At the back of my new computer, there are three DVI ports:

  -one on its own and it is DVI - I Dual Link (photo below)

  -both grouped together and on the side. one looks like DVI - I Dual Link and the other DVI - D Dual Link

  When you configure the workstation I naturally just assumed to connect all the cables DVI mail of my monitors for each of the two DVI ports on the side. Nothing happened.

  I removed then each of them to test it on its own. Still nothing.

  Then I plugged into the port at the top, and it worked. But it has only a single port.

  So I went back and tried the other in each of the two and went to the panel display and but it does not recognize the second monitor.

  At this point I don't know what to do. They told me this computer supports two monitors, but I don't see how it's done if neither of the DVI low ports to work.

  Is there anything else I should do? Or have I not those who simply do not work?

  I am running Windows 7 family Premium 64-bit (Service Pack 1), Direct X 11, and the graphics card is GeForce GT 630.

  If it means anything NVIDIA control panel says my card and monitor are HDCP and it does not find the second monitor when I use setting up the functionality of multiple screens.

  I would be very happy for any help and advice.

  Thank you.

  Lee

  This model uses a card mother IPMMB-FM (Formosa). The built-in rear I/O below;

  

  (5) - DVI - I (digital and analog output) and DVI - D (digital only)

  When the computer is equipped with a dedicated graphics installed in slot PCIe x 16 card, this motherboard integrated DVI outputs are disabled. The only connections that you can use are those on GT630 discrete graphic card. This card must have at least a DVI and an HDMI output. Please post a photo of the back of your computer, centered on the graphics card. You may need to use a HDMI-DVI adapter to connect the second monitor.

  Please send Bravo

• Phone number not an option for iMessage on iPad mini

  Hello

  So my ID Apple was recently hacked and had to change my password on all my devices (iPhone 6 and mini iPad). But now that I changed, my iMessage works well for my iPhone, but on my iPad, I have no option to choose my phone number. I tried to reset iMessage, reset my iPad, everything. Now I'm curious to know why, that's happened what else I can do for an option again.

  Thanks in advance for helping me!

  To go through all these steps?

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

• storage for MAC - air

  About 40 GB of storage used on my mac - makes no sense that I do not use this computer for films or images - just for internet and writing. We already have a projector comb with the hard drive. Any ideas before support again. Very curious.

  Free disk space-

  Space - free (2)

  Space - Free Up - Mavericks

  OmniDiskSweeper full - disk space 10.8 +.

  Up - WhatSize to fill disk space

• I need to buy new RAM for my iMac mid-2011. What are the specific specifications?

  I have a mid-2011 iMac, 21.5 inches, with an Intel Core i5 to 2.7 GHz and 4 GB 1333 MHz DDR3 processor. What RAM memory should I buy? There are a lot of options with different specifications listed on Amazon, and none seems correct. Help, please! Thank you

  Jbdammarell,

  I used OWC computer for my needs memory. Here is their recommendation for your computer.

  

• Function numbers for dynamically on average over the last 30 cells

  I am a trader and I have several months of data. I currently have a percentage of the sum of all the victories and defeats by currency pair. I want to create a function that retrieves the last 30 cells of data and creates a percentage I can compare it to the percentage of total victory.

  The cells are empty, unless I have add data in either to the upper or lower row. 1 win and - 1 are losses. 0 means not configured.

  Here's a full month with 20 data cells (cells max per month are 22) of trading days:

  

  This is the current month:

  

  I have 16 months of data with percentages of victory for all my data. As you see, I also have winning monthly winning percentages easily in the examples above (with a small division). I really, really want to compile data from the last 30 cells with data to create a winning percentage. It would be necessary to sometimes include 3 different lines of different months of data to create 30 cells with a number inside.

  A friend used the COUNTIF command but I do not have it works for me.

  If there is a different website to request this detail of the question please share that too.

  Thanks in advance,

  B

  Hi Braddon,

  It would be a pretty easy task if the data to be summed up in two columns from a single table and had no gaps, but that doesn't seem to be the case.

  Screenshots of two isolated sets of cells containing two rows (railway of) the data to be summarized, but give no indication where these data will be found in the document does not provide sufficient information to start to find a solution.

  Where are the data stored? You say "data for each month." "Every month" is recorded on another table?... on a pair of rows of the same table different?

  In the image (very vague) I, the factors of complications will gather data from a subset of continually changing several tables on multiple sheets and which specific cell contains the 30 most recent reference and is the one to start the harvest.

  While a few details and clarifications.

  Kind regards

  Barry