FDM 11.1.2.2 EFFECTS in the data after loading data

Similar Questions

• HOWTO copy effectively chart the data portal

  I have a table in memory VBS and would like to create a channel in this data set-based data portal, I currently use this construction of code to copy the data:

  ' intChannelCount is the number of samples

  ' MaxHold is the array of data to be copied

  ' oFFTMaxHold is the string of data that is the target of the data

  counter = 1 to intChannelCount
  oFFTMaxHold.Values (counter) = MaxHold (counter)
  next

  It's rather slow (and if data preview is open in the data portal) still a lot slower.

  Is there a method to copy the entire table in one operation on a string?

  Tone

  Hi tone,

  If you have DIAdem 10.2 or later, you can use the following command to do this with a command - by the way the table of values as one of the parameters - order this is a common situation when you query records of a base you want to load into the data as data channels portal.

  ChanRefsArray = ArrayToChannels (ValuesArray, ChanNamesArray)

  In the case of your example, it would be:

  Call ArrayToChannels (MaxHold, Array (oFFTMaxHold.Name))

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How can I stop Firefox to jump to the bottom of the page after loading

  the page jumps down to halfway after loading

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  Does this happen sometimes / much?

  Is the address of something you typed or a link or a bookmark?

• Shut down the PC after loading CD - R

  Hi all
  Currently, I meet a problem after loading a cd - r into the dvd drive, my pc stops and restarts. I did not the latest changes to my PC

  Rgds Ken

  First of all, why you haven't written details on your Toshiba laptop?
  What CD did you use? What application opened?

• Analyze the table after loading

  Hi gurus
  
  Let me know how we analyze the target table after loading to finish using an interface.
  
  Concerning
  Sree

  Hi Mary,

  There are two ways to do it,

  1. customize your IKM own target of Analyze table step added.

  2. create a procedure of ODI which will analyze the target table and can be called after the success of the loading data.

  Thank you
  Guru

• Newbie: After I have import using FDM, what should I do to get the data in HFM?

  Hello

  Anyone know what I should do next? Y at - it an article or document that can help me?

  Thank you very much for your time!

  Hello

  I just posted a new blog entry for beginners:

  akafdmee.blogspot.com/2014/09/IM-new-to-fdmee-part-1-How-do-i-start.html

  It is for FDMEE but also valid for classical FDM.

  Basically, to load data, you will need to do the following:

  1 set your import format

  2. set your mappings

  Then run the workflow:

  1 import

  2 validate

  3 export/load

  If all goes well, data will be loaded to your target.

  I hope this helps.

• Effect on the guarantee after the migration from one country to another

  Hello guys! I move the India to the Canada this year and my laptop warranty will end in August 2017. I get the same benefits of the guarantee to the Canada or what I need to buy an international warranty?

  Hey @abhaybhanot,

  Thank you for visiting the HP Forums!  You have come to the right place to ask questions, find solutions and get help from others in the community!

  Here is something that might help.

  Please let me know how it goes.

  If you want to say thanks for my effort to help, click on thumbs upward to give me a Kudos.

  Thank you.

• GIFs are beginning to half way through the animation after loading.

  The title says it pretty well. After GIFs fully loading, animations start part, approximately, to half way through before looping.

  Hi Kaldari-

  Sometimes, the audio or video content in a web page can't be properly downloaded and displayed in Firefox. A plugin required may be missing, obsolete, locked in a conflict with another plugin or extension, or the content can be blocked for some reason any. This article will help you to solve these problems.

  Difficulty common audio and video questions

  Hope that helps!

• How can I resize the avm1 after loading in the avm2

  I had a shell avm2 to load avm1 swf file.

  but once loaded, I don't know how to resize the avm1 to adapt to the avm2 W & H...

  Assuming that you used the Loader class to load AVM1 movie, you can change it by changing the width and height of the Loader instance once the AVM1 movie was loaded (not before).

• Expand the tree after loading of dataProvider

  I need to develop all the item in the Tree control after data has been loaded using dataProvider.

  Here is the code

  public function loadTree (): void
  {
  cursorManager.setBusyCursor ();
  var conn: NetConnection = new NetConnection();
  conn.objectEncoding = ObjectEncoding.AMF3;
  Conn.Connect (this.) Meta.Gateway + ' web/gateway.php');
  conn.addEventListener (SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
  var resp:Responder = new responder (onLoadTreeComplete, onFault);
  Conn.Call ("Client.Disk.GetTree", an RESP);
  }

  private void onLoadTreeComplete(e:*):void
  {
  trvTreeview.labelField = "label";
  trvTreeview.dataProvider = e;
  / / trvTreeview.expandChildrenOf(trvTreeview.dataProvider[0],true);
  cursorManager.removeBusyCursor ();
  }

  This only works if I call this function to any other event (such as a button click event) and not in the complete netconnection event.

  trvTreeview.expandChildrenOf(trvTreeview.dataProvider[0],true);

  How this could be done?

  Try to call validateNow before expandChildren or use callLater

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• the data of the FCAC keep stable

  Hello gurus
  
  I created a Data Guard in the rac node 2 rac environment. Its configured successfully. Now, I want to show the client a drilling activity.
  But as it is a production database I avoid risk to show passage switchback.
  
  As the customer does not want to stop the database. So, I want to know can I activate the waiting for the test database. I don't know if I open it once there that would damage the database waiting but it will go well for me that I would create it again. I don't want the transactions for which we test waiting to be there on the primary.
  
  I mean we want to test the day before.
  So, if I see the log_archive_dest2 parameter and open the day before and do some transactions on it. It would be nice OR he would have an impact as my primary database and there may be conflicts.
  
  Please clearly what are the best ways for the tests.

  The time that you enable the database ensures he DR relationship will be over.

  Once you test your waiting for database in read-write mode, you can convert again it back in a database waiting with the hep of backup of the primary database.

  Also, there will be no effect on the data of primary education during this operation.

• Necessary insight as to how the Stats are cascaded to the index after updates.

  SCENARIO OF
  
  • We have a process of intensive loading (100 s of the tables involved, several hours of execution). We collect stats diagram only on obsolete objects when executing to minimize the load on the system while the statistics come together at intervals (see the command below).
  
  • There is a table with an index on column X
  • When the table is inserted in during a charge process column X is null and that the index is empty.
  • When the table becomes stale (and the column X is null of remains), his stats get generated using the package gather_schema_stats with the STALE 'COLLECT' and ' CASCADE = TRUE options.
  
  • Subsequently, all records from the table are loaded and the collection of statistics has occurred, column X happens to updated with the values so then inserted in the index. More no record is inserted into the table.
  
  
  QUESTION
  
  After the charge fit more no record and the table never gets denial as defective if new stats are not generated (no surprise). However, what is the impact on the index which now has lines in there (as a result of updates that occurred after the loading table has been loaded)? When the stats were executed on the table (with case sensitive = true) index was empty. Do I need a work of gather_stats separated on the index or somehow, it will inherit the values associated with the full table optimizer statistics? _
  
  Here is the command I use:
  exec dbms_stats.gather_schema_stats (ownname = > 'UICONNECT',-)
  Options = > "FADE TOGETHER",
  estimate_percent = > dbms_stats.auto_sample_size, -.
  method_opt = > 'for all columns size auto ' -.
  degree = > dbms_stats.auto_degree;
  Cascade = > TRUE);
  
  This problem is forcing me to understand the optimizer (viz has know statistics) more than I hoped would be necessary. But alas... developers ask me if I need to manage (correctly)!
  
  Thanks in advance for any idea on this issue (or references to good material... it's hard to google it).
  
  Published by: TonyG on July 14, 2010 14:10
  
  Published by: TonyG on July 14, 2010 14:11

  Just to clarify one thing:
  "Cascade" not "copy" table to the indices statistics.
  Cascade just make sure that you don't have to hard-code calls individual gather_index_stats. So this means that its index stats are also gathered, based on what is in the index.
  This means that the generated statistics will be inaccurate, once the column is filled, as probably the key indicator, the clustering_factor, of the index will change.
  So yes, his stats should be re-assembled, or you can decide (when the grouping after load factor is relatively constant) to block these statistics and to exclude the gathering.

  HTH
  -------------
  Sybrand Bakker
  Senior Oracle DBA

• I'm unable to use special effects in the Messages on my iPhone 7.    Does anyone else have this problem?

  I did reduce the Motion is turned off.  If I try press the blue arrow, nothing happens.

  Hello, Lfsawyer!

  Thank you for reaching out by Apple Support communities. I understand from your post, that effects full screen do not work for you in iMessage after update to iOS 10, even if you have verified that reduce the Motion died. I have really enjoyed all the new iMessage effects and whether you are able to enjoy it, too - I'd be happy to help you!

  I have a little I can recommend troubleshooting measures. Before you begin, create a backup of your iPhone using iCloud or iTunes. You can get the instructions to do it here: How to back up your iPad, iPhone or iPod touch

  So, try the following in order, testing after each step. Stop when the problem is resolved.
  

  1. Restart your iPhone by following the instructions here: restart your iPad, iPhone or iPod touch
  2. Reset your iPhone settings in settings > general > reset > reset all settings. None of your personal data (contacts, photos, calendar events, reminders, etc.) will be deleted, but customizable settings (brightness screen and paper painted, alert sounds, the Date and time settings, etc.) will be returned to their default values. Also, saved networks Wi - Fi and passwords will be deleted, as well as the AFN or previously used VPN settings.
  3. Restore your iPhone settings, use the steps in this article: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure your iPhone as a new device (i.e. without your backup, at least temporarily). You can sign in iMessage FaceTime, iCloud and iTunes and the App Store with your Apple ID then test your ability to send effects.

     If you can send these effects full screen after the restore, go ahead and put your backup on the iPhone using this article: restore your iPhone, iPad or iPod touch from a backup

  Happy messaging!

• How to get the text have the same effect as the video?

  Hello

  For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

  For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

  A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

  EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

  Thank you

  One way is to create a clip made up based on the title and the original clip. Then apply the effect.

  Another way is to use an adjustment layer.

  Good luck.

  Russ

• It's good to put in glass on screen? is - that may decrease the effectiveness of the screen?

  friends, I brought 6 s more. It's good to put in glass on screen? is - that may decrease the effectiveness of the screen?

  < re-titled by host >

  It could cause your iPhone overheating which may also void the warranty.