FDMEE attribute Setup in the Import Format

Similar Questions

• Jython to read and replace a column null of concatenated in FDMEE 11.1.2.3 Import Format

  Hi all

  I'm working on an upgrade 11.1.1.3 11.1.2.3 FDMEE. Please advise on the underside.

  I have a data file that is long of 14 columns and format import concatenate columns 4 + 6 + 14. FDM 11.1.1.3 it was an import script that uses the following logic:

  Dim strICP

  If strField = "" then

  BlankICP = "1500".

  On the other

  BlankICP = strField

  End If

  When I try to use the same logic of Jython, instead of vb script below Jython interpreter not the last empty column as a null and does not replace the null value with the correct value that interferes with my similar cards. This logic works with other scripts to import as long as it is added to a column of the concatenated string that isn't the end of the file. Note: there is no space in column 14, when it is empty.

  Sample file:

  2014 | 1. 1500_01 | 027 | 51510 | Trading | 5000 | USD | Segments | Trading |

  2014 | 1. 1505_02 | 037. 51510 | Trading | 750. GBP | Segments | Trading | Full

  def BlankICP (strfield, strrec):

  If strfield == "":

  Returns "null".

  Another thing:

  return "Not null".

  Valid in FDMEE to:

  02751510

  03751510NotNull

  Ok

  I noticed that it checks the null value when parsing the value of the field:

  

  So basically he does not apply the import script when the source field is null

  If you change the value empty by white space, then it works fine:

  

  Solution: create only a single line of PKI and place the script to concatenate all areas:

  

  

  

  I suggest you raise an SR to ask for the handling of empty values in the import scripts. At least for script evaluation process.

  Let's see if there is another workaround solution.

  Concerning

• Why Premiere Pro CS6 will only be important to the mpeg format?

  Hello, so I use Premiere Pro CS6 now for only a few months and when I imported (using "capture" or F5) and tested a few images a HDV camera using a miniDV Tape, I noticed that Premiere Pro would be to import the mpeg format. I looked up how to change this but couldn't find anything. So in short, I ask you if there is a way to change the import format so that whenever I have import from DV tape, it is not mpeg?

  Thank you!

  .. .footage of a HDV camera...
  .. .only import in mpeg format.

  Capture HDV will always be mpeg.

  whenever I have import from DV tape, it is not mpeg?

  DV capture will be (pc) .avi or .mov (mac).

  Note:

  Capture of a band, import a file based media.

  Capture and scanning

  In addition, what is the problem with mpeg?

  Why are what determined you to change?

• Error importing metadata when you create the import profile

  Hi guys,.

  I am creating an interface to metadata (out-of-the-box) to Fusion (source) to a HFM application. I have successfully completed the following activities:

  -Registry system source

  -Configure entities accounting source

  -Initialize the source system

  -Target registry system

  -Create the import format (Fusion of application HTP) that corresponds to the account dimension in the target application the COA account segment from the source system.

  -Create the location, connected to the high import format

  -Create the metadata rule

  When I try to run the rule of metadata, it triggers the following error in the step "design EPMA import profile for dimension ERPI system profile 5:

  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  See below the FDM application log:

  2015-03-09 13:04:25, 716 [AIF] DEBUG: CommDim.getRuleInfo - END
  2015-03-09 13:04:25, 717 DEBUG [AIF]: AIFUtil.callOdiServlet - START
  2015-03-09 13:04:25, 941 [AIF] DEBUG: the registry has been found!
  2015-03-09 13:04:26, 006 INFO [AIF]: Services of EPMA Web URL: http://EPM11124V2:19000 / hyperion-bpma-Server
  2015-03-09 13:04:26, 007 [AIF] DEBUG: establishing a session now...
  2015-03-09 13:04:29, 523 INFO [AIF]: the session Id is: fa0ecc96-m-e2ee-f7be-8b8b6d0112d8
  2015-03-09 13:04:31, 305 [AIF] INFO: creation of profile import:
  2015-03-09 13:04:32, ERROR 451 [AIF]: error encountered
  2015-03-09 13:04:32, ERROR 453 [AIF]: error encountered
  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  ---End of inner exception stack trace---)
  2015-03-09 13:04:32, 489 [AIF] DEBUG: AIFUtil.callOdiServlet - END
  2015-03-09 13:04:32, 498 FATAL [AIF]: error in CommDim.loadMetadata
  Traceback (most recent call changed):
  Folder "< string >", line 4185 in loadMetadata
  RuntimeError: java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server could not process the request. ---> System.FormatException: input string is not in the correct format.

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  -End of the exception stack trace internal-

  2015-03-09 13:04:32, 568 FATAL [AIF]: error in the load metadata
  2015-03-09 13:04:32, 641 [AIF] INFO: end process FDMEE, process ID: 201

  I'm new type of debugging using FDMEE, but I am not mistaken, he finds a string where I shouldn't be finding a string somewhere in the metadata? I looked in the source system metadata, but I see not all metadata 'string. ' Could someone maybe advise and point me in the right direction on how to handle this error (which causes the error, where to look, etc.). Any help would be appreciated kindly!

  Kind regards

  Gerard

  Hello

  Looks like you might need to work on ensuring that FDMEE can talk to EPMA.

  Also take a look at the following doc:

  FDMEE: Export of metadata for EPMA fails (Doc ID 1633771.1)

• Fixed-width import format FDM &amp; periods/accounts question

  Hi experts FDM.

  I have a problem I wanted to tender out to you on about the fixed-width import formats and how to meet my current scenario for export to Hyperion Planning.
  I work with a flat file (.txt), I need to import the FDM with the current format;

  A	B	C	D	E	F	G	...	Z
  Year	Channel	Product	MTD-account-Jan 1	MTD-account-Jan 2	Jan-VOE-account1	Jan-VOE-Account2	....	Dec-CDA-Account2
  2013	Channel_1	Product_1	1000	2000	1000	2000		10000

  These are all fixed in width for the field lengths must be defined in the import format. The obligation for the loading of the system is only a speciifc value account 1 and account 2 months a year.

  If my choice month is 2013 Jan, I need only the columns F and G to be charged. These are the issues I've identified;

  1. A fixed-width import format can accommodate for the loading of multiple accounts in the same file? Or I would need a format to import separated by account?
  2. A fixed-width import format can accommodate for variable current months loading? Or do I 12 import formats/sites per month?

  Your help is very appreciated!

  Thank you very much

  
  Aaron

  Send me an email

  [email protected]

  Thank you

• MultiLoad - import vs. Import Format Expressions cards

  Hello

  I'm running an issue while trying to use the multiload models.  Loading with an enitty that I declared in the importation of expressions format, these expressions are not reported to multiload data unless these expressions are shown on the maps to import.  I wonder if this is really the case, that the multiload function does not reference the Import Format but refers only the cards of import for the mapping.  Is this the case?

  Thank you

  Adam

  you are right in your thinking. the multiload text / excel layout is actually the multiload import format. If you look at Chapter 11 of the guide API FDM, it details the steps THAT FDM is going through for each type of process.

• Invalid character import format

  I accidentally created an import with a format & who's bad character for FDM. It allow me to create the import format, but now I get an error page whenever I try to access the Import Format screen. This prevent me to remove the problematic import format. I tried to export import formats, remove the bad in the file xml and re - import but it did not work.
  
  No idea how to do to remove this import format?

  The only way to solve this problem is directly in the database.

  There is no workaround available via the web or at the bench.

• Error of the API in the import script

  I'm trying to concatenate the result of a search of the dimension on the string of the source account. I have attached the script below to the account dimension in the import format using a data pump import script.
  ____________________________
  ' Function CCRule (strField, strRecord)
  
  Dim StrCC
  
  StrCC = (DW. Utilities.fParseString(strRecord,8,3,","))
  
  If StrCC = "" then "
  
  CCRule = StrField
  
  On the other
  
  StrField = CCRule + '_' + API. SqlMgr.fMapItemLookup(800,"UD5",StrCC)
  
  End If
  End Function
  _______________________________________________________
  
  
  When I run this script I get the error "object required «API"»
  
  Please let me know your thoughts on what I'm doing wrong here.
  
  Thank you

  the only thing I want to point out is to look at the performance of this. There are ways to do better if it is 'no '.

  Also, if she answered your problem do not hesitate to award points. If I get 1000 points do I get free a slinky or something. :-)

• I downloaded the Microsoft compatibility pack. He asks me to double click the File Format Converter.exe file on my hard disk to start the Setup program.

  Original title: could not open the file.

  I received by e-mail a file which I can not open... so I downloaded the Microsoft compatibility pack. He asks me to double click the File Format Converter.exe file on my hard disk to start the Setup program.  I'm not savvy and don't know where to find it!  Your help will be admired.  BF

  Hello, I downloaded myself today and when I read your question, I went looking for him.

  The only place where I found it was prefetch.

  However, I was able to view the file after downloading.

  When I download I always save it to the desktop, then the scanner and then double-click it to install. If you haven't noticed where it was installed, check your temp folder.

  Or download it again and save it to the desktop.

  I hope this helps.

• How to use 'Import using Windows' instead of using the Live format?

  original title: "IMPORT to WINDOWS HELP."

  With my old computer, operating system Windows Vista, I was able to import pictures from a camera, DVD or CD, by "Import Windows using". It worked very well, and I liked the format of the Gallery of images produced, in particular space readily available for more information (title, date & tags).

  When Windows Live became available as an option, I DELIBERATELY chose to use 'The window using import', rather than 'Import using Windows Live', that I did not like this product format.
  When I had to buy a new computer, running on Windows 7, I find that I am completely restricted import using "Windows Live".
  Y at - there no way to return to importing photos using Windows rather than in the "live" format that seems necessary?
  Thanks for any help and assistance, someone can give.

  If it is not listed in the Autoplay download another program like google picasa... of photo editing and manually copy / paste the files that you want by using windows Explorer.

  

• FDMEE: Unable to capture the State of the successful import flag in the afterimport script

  Hello Experts,

  I am facing a problem in the import successful FDMEE shot.

  I have an obligation to send e-mail notifications on import successful and unsuccessful import mentioning status.

  I tried to use variables:

  1 set objProcessStatus = objFDMAPI.API.MaintenanceMgr.fProcessStatus (strLoc, strCat, strPer, strRulID)

  objProcessStatus.blnImp

  The objProcessStatus.blnImp value is always returned as 'false' regardless of the State of importation (successful & unsuccessful both cases)

  2. I tried with objProcessStatus.lngStatus,

  Here also, the returned value is always '0', regardless of the status of the import.

  3. I tried to capture the "PROCESSIMP" of TLOGPROCESS and the value of PROCESSIMP is always 0 even on successful importation.

  While the fish turns Orange Import indicating a successful import.

  Need help in an effective way to capture the flag of the State of import successful.

  Sample code I use to capture the State:

  Dim lngStateCheck

  Dim objProcessStatus

  Dim stat

  strLoc = objFDMAPI.API.State.LocName

  strLocKey = objFDMAPI.API.State.LocKey

  strCat = objFDMAPI.API.State.CatName

  strCatKey = objFDMAPI.API.State.CatKey

  strPer = objFDMAPI.API.State.PeriodKey

  strRulID = objFDMAPI.API.State.RuleID

  WScript.Echo "key location" & strLocKey

  WScript.Echo "ID of the rule" & strRulID

  WScript.Echo "Partition key" & strLocKey

  WScript.Echo strPeriodKey & "period"

  "The value of object process status indicator.

  Set objProcessStatus = objFDMAPI.API.MaintenanceMgr.fProcessStatus (strLoc, strCat, strPer, strRulID)

  Set FSO = CreateObject ("Scripting.FileSystemObject")

  Set FSO = writefile. OpenTextFile("E:\FDMEE\data\scripts\debug.txt",8)

  «I am here and my value is» WriteFile.WriteLine

  WriteFile.WriteLine objProcessStatus.blnImp

  WriteFile.WriteLine objProcessStatus.lngStatus

  WriteFile.Close

  'Destroy objects '.

  objFDMAPI.Dispose

  Set objFDMAPI = Nothing

  ********************************

  Save file entry of PROCESSIMP: (the following query is in the log file indicating that PROCESSIMP is updated as 0)

  2015-09-01 11:15:08, 008 [AIF] DEBUG:

  UPDATE TLOGPROCESS

  SET PROCESSENDTIME = CURRENT_TIMESTAMP

  PROCESSSTATUS = 0

  PROCESSIMP = 0

  PROCESSVAL = 0

  PROCESSEXP = 0

  PROCESSENTLOAD = 0

  PROCESSENTVAL = 0

  BLNWCDIRTY = 0

  BLNLOGICDIRTY = 0

  BLNVALDIRTY = 0

  PROCESSIMPNOTE = NULL

  PROCESSVALNOTE = NULL

  PROCESSEXPNOTE = NULL

  PROCESSENTLOADNOTE = NULL

  PROCESSENTVALNOTE = NULL

  WHERE PARTITIONKEY = 37 AND CATKEY = 1 AND PERIODKEY = ' 2017-01-31' AND RULE_ID = 56

  I tried to print the values of IMPSTATUS in afterimport & befValidate script.

  The value of AfterImport is = 0

  While in BefValidate = 1

  This proves that the value of the indicator of State for IMPSTATUS is changed after the afterimport of script is executed.

  Thanks for your time and your help.

• What is the best format to import to an indesign book files

  I am reproducing a family cookbook and will place small blows to head to their family members or their children next to the recipe.  I intend to scan and import about 150 pages of the ancient book of recipes and use the pages but will place photos, adjacent to the recipe.

  I tried this with indesign cs3 import pages as PDF and ran into memory important problems and have now upgraded to cs6 but would make good sense for the first time.

  So bottom line: if import a large number of scanned documents is it better to analyze as JPEG or PDF files or is there a better way.

  You have Acrobat Pro? If so, I'd run all these pages however scanned OCR and conversion of text before placing them.

  But I wonder what you are doing that you are out of memory because placed images (as opposed to glued or placed and nested) must use only enough space for the pointer on the image and a preview of the screen. What resolution did you use to scan pages? What color mode? Which was exactly the memory problem you experience?

  Regarding the image format, you should see the same size of file that you use tif, jpeg, PDF or psd to your images if all other factors are the same.

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.

• New camera.  LR. Don't let me import the photos in the new camera.   Get the following message: some import operations have not been executed.  The files are not recognized by the raw format support in Lightroom...  Application of point 4.4 of Lightroom. 

  L.R., I cannot import the photo of the new camera.   Get the following message: "some files are not recognized by the raw format support in Lightroom."  Click below to view a version update of Lightroom.   Done this and updated Lightroom 4.4.   Still cannot import - get the same message.

  Devices supported by Adobe Camera Raw

  The D610 requires LR version 5.3 or newer.

  If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.

• How to change the date format in Lightroom, when importing images?

  When you import into Lightroom, you get the following structure in Lightroom for Macintosh HD.

  Year-> Date.

  I want some level 3 like this structure.   Year-> month-> Date

  How to do this?

  Hi lennartr,

  When you import images, you can change the Date Format in "Copy as DNG, copy or move", but not in the Add box.

  On the right panel, you expand the Destination folder and change the Date Format.

  Let me know if it helps.

  Kind regards

  Tanuj