Update frame

Similar Questions

• Update frame 9 does not

  Has anyone cross a mistake where updates to FrameMaker 9 return an error message that the updater "already works" and the update fails?

  Fame is installed on Windows XP. We tried:

  • reboot the machine
  • verification of multiple instances in (recommended in knowledge base) Task Manager
  • defragmentation of the computer
  • Uninstall/reinstall frame
  • I checked the forums and there are some assignments involving the same error message for updates illustrator and creative suite updates, however the solutions involve files and folders that do not exist in the version of the update I see with just 9 framework

  Any insite on this matter is appreciated.

  This article refers to the Robohelp 7 updater, but the same exercise can apply to what version you have installed:

  http://kb2.Adobe.com/CPS/403/kb403211.html

  I suspect that HR is the culprit, as I've never had a message of "update running" working on systems that had just FM and Acrobat Pro on them.

• Updated Windows 8 stuck at 0 k, 0% downloaded

  I tried various methods (bulk update, update both, selective update updates), but am not able to download and install windows updates. I also tried troubleshooting techniques using the tool and using the command prompt to stop and start services, but nothing helped.

  There are a total of 60 important updates that are stuck in this State.

  Because of this, I am not able to conduct an updated version 8.1 of Windows either, because it is not visible in my store. In fact, I am facing a similar problem with the store, in which updates are not going through and get stuck between the two.

  Pointers to tackle this problem would be useful.

  Let it run for a few hours. On my laptop that was also new, he remained at 0%, but it was actually to download updates. Many of them are updates frame lying around long. I had this problem on two different computers complete, I guess it's a windows problem.

• I keep getting error messages so there is obviously a problem, can someone tell me what I should do to fix it please.

  Can someone tell me what I should do to fix it please.

  Examples of errors in Adobe

   

  SyntaxError: Error #1132: entry of analysis not valid JSON.

  to JSON$ /parseCore)

  to JSON$ /parse)

  at my.game.global::GlobalParamsData/globalParametersDataLoaded()

  at flash.events::EventDispatcher/dispatchEventFunction()

  at flash.events::EventDispatcher/dispatchEvent()

  at flash.net::URLLoader/onComplete()

  : Error #1502: a script is run for longer than the default timeout of 15 seconds period.

  at com.king.flash.spaceland.animation::SceneObjectAnimationSystem/update()

  at com.king.ragnarok.spaceland.update::SceneUpdater/update()

  at com.king.stritz.initialization::UpdateLoopInitializer/render()

  at com.king.flash.flatland.update::FixedTimeUpdateLoop/update()

  at com.king.flash.flatland.update.frame.stage::StageEnterFrameDispatcher/onEnterFrame()

  you posted on the wrong forum.  Whoever created this facebook game should be post here and we will help you with their code.

  I don't know there is nothing you can do talk but avoid this game until the author fixes it.

  Flash Pro CC - général to the use of Flash Player>

• I've been opening explore and get the following messages

  There is obviously a problem, can you tell me what I should do to fix it please.

  Adobe errors

   

  SyntaxError: Error #1132: entry of analysis not valid JSON.

  to JSON$ /parseCore)

  to JSON$ /parse)

  at my.game.global::GlobalParamsData/globalParametersDataLoaded()

  at flash.events::EventDispatcher/dispatchEventFunction()

  at flash.events::EventDispatcher/dispatchEvent()

  at flash.net::URLLoader/onComplete()

  : Error #1502: a script is run for longer than the default timeout of 15 seconds period.

  at com.king.flash.spaceland.animation::SceneObjectAnimationSystem/update()

  at com.king.ragnarok.spaceland.update::SceneUpdater/update()

  at com.king.stritz.initialization::UpdateLoopInitializer/render()

  at com.king.flash.flatland.update::FixedTimeUpdateLoop/update()

  at com.king.flash.flatland.update.frame.stage::StageEnterFrameDispatcher/onEnterFrame()

  Hi jacquelineb94654101,

  This is a forum to drive then please post your request in the community Adobe animate CC - homepage so that an expert there could you help.

  Kind regards

  Ana Maria

• HELP - Get AE ONLY USED 1 CORE for in-comp

  Hi AE community.

  
  

  I have a pretty solid but am very disappointed by the slow update frames in After Effects. I'm quite familiar with how to set up the AE for distribution of RAM/CPU, but maybe I clicked something that causes this problem.

  
  

  My system has 24 cores and 64 GB of RAM.

  I am hosting AE to use 8 of 24 hearts and give each a 4 GB of RAM

  Also have enabled for a gtx580 CUDA / 3GB.

  Operating system is Mac 10.8.5 with AE cloud creative, completely up to date with NVidia drivers.

  
  

  I enclose a picture (below) that shows 12 of my 24 hearts leaping to action during a back of frame (strange b/c I said AE only to use 8, but I'm not complaining... more merrier), then a simple core ends make it very slowly.

  
  

  Another point to note is that I am made a framework for an animation of card that uses a 20K jpg, which is 10.7 MB in size. There are a few pictures like what comes to overlap another. 10.7 MB size is actually quite small given the resolution, but maybe that's a problem... but I don't know how that relates to EI, quite simply, do not use the immense power that it has.

  
  

  I use the CLASSIC 3D rendering engine. The Raytraced 3D rendering engine is very fast, but I can't use my different overlays that are necessary, if this is not a viable option for me at the moment.

  
  

  I'm still stuck I was wondering why all of my CPU power will lose within the program. Perhaps its worth mentioning that when I make a final report to be filed (especially using the Background Renderer script) all 24 cores are used and frames are rendered much more quickly when I'm still working on my computer.

  Info on the image:

  #1 = what happened the first 10 seconds after moving to a new image in the timeline

  #2 = another 30 seconds of rendering on a basis only

  

  There is no new idea to give, except perhps to say that we currently have a large part of our team working on the production of all After Effects better behavior (i.e., faster) in this area.

• Problems with Samsun Galaxy Tab Android 3

  Hello:

  We have a problem with a Samsung Galaxy Tab 3.  The app is installed fine game of Google store. It does not show thumbnails of the public/free journals on the library (black rectangles just to appear). The signs of the user in the application (we live right active) and thumbnails of law journals are displayed with black rectangles. Taps user on a blanket and it starts to download, but all of a sudden the screen goes black and the user has kill the app and then restart again.

  Any suggestions on what could be the problem?

  Saludos...

  Testers told me that once they did a software update (fram, Samsung), everything works fine on this device.

• Problems of frame - updates fail to install

  original title: problems of frame

  When downloading the Microsoft updates, everything installs fine except for the updates of the framework... I don't know if they are important or what.they do.
  I was told to uninstall all components of framework on my computer, and then reinstall., but this seems drastic.
  Can someone advise?

  Hi TerryShaw,

  The following article should help you troubleshoot setup of .net framework update issues.

  Fix the .NET Framework

• Updated for first 2015.3 CC and now Audio dropped from stuttering frame-type questions...

  I've just updated for first CC 2015.3 on my system running on Windows 7, 32 GB of RAM, quad-xeons double...

  Seemed like a good idea...  Now, the sound stutters and drop frames.

  I have a multi-boot system, so I just loaded Adobe CC on my boot Windows 10.
  Always first 2015.3 does not play correctly and stutters.
  Has created a new project-sequence and placed an MP3 on the timeline without any video. Looks a sort of boat engine during playback and the visuals on the counters still indicate stuttering as well.

  Anyone else having this problem after the update?
  How can I get my 2015.2 or whatever I had on my system?  There is no menu drop down more on install to install an older version [other sites showed a fall to the bottom of the box where you can install the CC 2014 version but I have yet to see it]

  Major project I want to do and now the first is completely useless after this upgrade.

  If 100% fresh install go on Windows 10 Virgin operating system still has flaws that had my configuration of Windows 7 operating system, I'm not clear how 2015.3 playback can be rectified?

  After some troubleshooting I've narrowed the issue until this CC first 2015.3 don't like my graphics card, a SoundBlaster Z and its parameters.  2015.2 worked fine, but now the sound stutters and playback is extremely agitated turn upgrade.

  For this project, I am just finishing, I'll use, of all things, the HDMI sound goes to my computer screen.  The Nvidia graphics card I do not mind reading.  I'll tinker later and see if I can find a permanent solution...

• Update table of contents (frame) in the primary anchor text stream?

  I understand that a table of contents of InDesign should sit on its own page or in a separate text frame, so it can be easily maintained and updated.

  Help of InDesign said: "avoid threading the TOC to other blocks of text frame in the document. If you replace the existing table of contents, the whole story will be replaced by the update table of contents. »

  Fine and understand. However, I'm working on a project where I need all the content (from the illustration of the cover of the last line) to sit in the primary sequences of the spread of master - including the table of contents.

  Here's what I've tried: I open the Table of contents dialog, made all the settings and click OK. Clicking on will now create a new text frame with the table of contents, which can be changed by selecting this image by using "Update Table of contents. So far so good.

  I cut this framework and then inserted as a framework anchored in the stream text main, just as I have anchor a table, image, etc.. However, after anchor this TOC frame, I can not more updated by using "update the Table of contents. It is just another framework, not recognized as the table of contents more.

  Is there another way to have a 'live', table being updated content that will float in the primary text flow?

  Thank you.

  Ariel, I think you should give up on e-mail responses - empty again...

  PlainMartin,

  I could make this work in CS6 (and I would consider another version that allows to drag the anchored object rather than cut and paste). Now the SHIFT key and dragging the blue handle in the main story, I could anchor the table of contents, and when the text cursor was in it I could update. Make sure you anchor in a separate paragraph that uses a style that is NOT included in the table of contents, or he'll start on update.

• Dynamic text field not updated to actionscript in the 2nd Frame

  I have a clip with two frames. In the 2nd frame there is a clip that has a text field.

  My goal is to some events that I will be proposing to the frame that has the clip with the text field.

  I'm trying to update the text field with a code something like: -.

  public void updateTxtFld(e:Event)

  {

  My goal is to certain events show the clip with the text field

  questBG.gotoAndStop ("glow");

  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field

  }

  After some time I again back to the framework that has no movie clip masking so the clip

  public void masquer()

  {

  questBG.gotoAndStop ("idle");

  }

  The text field not updated since the actionscript code even if trace (arrowText.text) shows the updated value.

  Now, if I remove the clip of frames & change the updateTxtFld() as

  public void updateTxtFld(e:Event)

  {

  (questBG.getChildByName ('arrowBG') as Sprite) .visible = true;

  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field

  }

  Then it works very well with the updated text in the text field. It seems that there seems to be a problem in dynamic text field update in frames.

  I also checked that the incorporation of text is fine in both cases

  I created the FLAS using CS Professional 5.5 & I am trying to change the text field using actionscript running in Flex Builder 4.7.   Let me know if I need to send the fla (working and non-working version).

  you are the assignment of text to arrowText before the timeline then moves to "shine".

  Use the render event to assign the text:

  public void updateTxtFld(e:Event)

  {

  My goal is to certain events show the clip with the text field

  questBG.gotoAndStop ("glow");

  internship. Invalidate();

  this.addEventListener (Event.RENDER, assignTextF);

  }

  function assignTextF(e:Event):void {}
  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field
  }

• CS6 InDesign text frames are not updated

  Hey guys,.

  It's probably a function to check a box... But since the upgrade to indesign CS6 (PC), my text frames don't provide a view on how the text will sit while I do drag and resize. I have to you release the mouse button and then the blocks of text are updated. A simple problem which cost me hours of time trying to adjust the text where I want to spend...

  I'll always be in your E-debt if you can solve my problem. I tried checking and unchecking about each preference I could think.

  
  Thank you

  Louis

  The default setting in preferences changed to CS6 value Live Drawing screen delayed because immediate casued no end of problems for users of marginal material.

  You can change the preference, or simply hold the mouse to the bottom for a moment before sliding get the live preview.

• crash Frame (7.2) causing xrefs on book update - possible causes?

  I worked on an update of the model for an existing set of the RFSO, and xref cause Frame crashing on the update of the book.
  I know that the XREF is the problem: when I update the book without the update references selected, all right.  When I select update of references, but manually remove all xrefs, all right.  When I update my old files, xrefs, all right.
  But as soon as I add a nine xref and try to update the book (including update of references)-crash.
  I also tried to save the MIF file, and then re-register as FM; even a crash.  However, I can open an individual file and update its references without problem.
  It is not just a simple file incorrect, no more.  All that is bad go / went spread across my doc game (newly based on a model), and now virtually any book, and no matter what file may cause frames to be planted when I update the book.
  Xref formats are nothing out of the ordinary, and all formats seem to cause the same problem. I'm even not change any format of char in them.
  * Then, nobody knows what kind of questions xref for a brand newly entered xref, or what kind of file, could be seen by Frame as invalid and therefore cause a crash when it updates references to a collection? **
  All ideas are welcome!
  -Monique

  Monique,

  Have you tried to create a new address book file? This option also stores x - ref (point BookXRef) links and corruption might be there.

• Update slow frame rate during playback of videos

  I noticed when playback of YouTube videos, the update of the video images at a slower pace to the point where he feels that the film takes place in slow motion. Sometimes it conditions other stays for a few minutes. There is no any degree if I'm streaming or playing a movie stored on disk hard (machine is not the CD player).

  I ensure it no other apps work which could infiltrate power of main processor/RAM or video processor. All the drivers are the latest and greatest, and I don't see any warnings anywhere in System Manager.

  There win 8 and Intel HD Graphics 4000 with 1.6 G of video RAM that seems honest enough to play the video file smoothly.  No idea if this is a known problem, the cause and the solution?

  Thank you

  @Aztek ,

  Hello and thanks for the display on the HP support forums.  If you have gone through removal and installation of the drivers and make sure they are all pilots of fixes.  You've gone and made sure all the apps are closed so that they do not have the resources.  You've done everything you can do on one aspect of the software.

  Unless you haven't tried alternative media players.

  Have you updated adobe flash player?

  You click the battery icon, it might be on the power saving mode.

  Management Power Options (Windows 8)

  Search for free media players in google.  VLC is one of those that I use all the time because it has all the codecs.

  If you have, then you want to talk to a hotline for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Let me know how things are going.

  Thanks again for posting and have a great day.

• AE 12.1.068 update-Random Red Frame still Happens-but fixed in the body v7.2

  OS 10.8.4

  AE 12.1.068

  AE updated today and always have the random red border when rendering... file source ProRes422. This seems to be fixed in the first v7.2 tho.

  Anyone else still see it after update?

  We released update after effects CC (12,2) yesterday, which has the fix for the problem of Red images. If please install the update and let us know how it works for you.