Feature request: more complex brushes

Similar Questions

• Feature Request - more than a favorite

  This is a feature request.

  The function "Call Favourite" could not store more than one contact? Favorites of perhaps fifteen?

  You have the Volume Up & Down control NOT control the volume while on this screen and instead scroll through a list of several favorites.

  I also was disappointed initially I could only add a favorite. Then I discovered that you can add an application several times. In this way, you can add several favorites. The only restriction is that maximum of 9 applications (?) that you can use on the watch. actually it gives you like a max of 5 Favorites, on what's good enough for me.

  Hope that helps!

• Feature Request: more properties with check boxes and option buttons

  If you insert a radio button on a Web site, the pallete property inspector (right of expression? in German it is called "Akbulak") should provide checkboxes to 'disable', 'read only' 'access key' and a little more.
  This properties can be defined in the code manually, but not in the palette.

  WebZopp wrote:
  > If you insert a radio button on a Web site, the pallete property inspector
  > (right of expression? in German it is called "Akbulak") should offer
  > checkboxes for 'disable', 'read only' 'access key' and a little more.
  > This properties can be defined in the code manually, but not in the palette.

  I agree that it is a very sensible suggestion. (The correct name in)
  English, by the way, is the property inspector). Since it is a
  User Forum, your feature request is not likely to be seen by the
  good people at Adobe. Use the request/Bug report form to do a
  official request. Most people who make requests through the agent
  form, most likely Adobe is aware.

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  --
  Adobe Community Expert David Powers
  Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• Feature Request: order more polynomial scaling

  VeriStand supports up to 9, and the producers that I am simulating are settled with polynomials of order 10. I'm getting 9 on the curve the 10 makes it and get on with it, but it would be nice if it wasn't an arbitrary limit.

  Hey Stephen,

  This definitely falls into the territory of feature request, but it seems that the scale supports an arbitrary number of coefficients.  It's just the system explore UI that limit us.

  To test this, I went directly in the XML definition of system and a factor of 11 has added to the scale of the polynomial:

  

  And it seems to work to generate the reverse and actually coefficients across the channels.

  Note: in general, it is never recommended to amend the definition of XML system directly.  You could cause unforeseen problems and generally make your life difficult.  Using the ZFS API to create a polynomial scale would be the recommended method to work around this limitation of the user interface.

  -Kyle

• [Feature request] Quick settings USB-Hotspot

  [Feature request] Quick settings USB-Hotspot

  Please could you add USB-attached-Hotspot as a quick Sony as a connection Wi - Fi, Hotspot or in Mode offline.

  Reason:

  I use my Smartphone as a wireless adapter for my very old PC. It is possible to use USB-attached under

  "Settings of->->-> USB-attached Mobile Hotspot", but it is somehow a lot of your time.

  Could you add this as quick even in locked screen, where you could use more quickly.

  I mean something like this:

  1.) Smartphone is locked

  2.), drag you down and you can see off WiFi, Bluetooth, Mode, assist light

  3.) and if you connect the Smartphone via the USB port on the PC, there will be a new Quick-setting-icon named "USB-attached".

  (4.) If you click it, it will give your Internet PC as you go to the:

  "Settings->->-> USB-attached Mobile Hotspot",

  5.), you don't have to unlock your phone for this.

  This already exists on Cyanogenmod 13.

  @Bugmenotsony,

  I see, I totally misunderstood. I'll pass your comments along, I also recommend you contact your local support team and let them know too. Use the link in my signature to find their contact information.

• Is Container::borderRadius a decent idea for a feature request?

  Before that you think (or probably you have already done) to suggest the 9-patch scaling, allow me to clarify my situation.

  I have controls that scroll in a container. I use an absolute provision and manage key events to make the scrolling. The same situation is if the container is set to any mode of scrolling in no more. Controls that are the object of a scroll are ImageViews, it is impossible to achieve by a substantive ruse. A masking approach, displaying a picture above the container and make transparent holes in this 'false' if necessary, is not a very effective in my case option, because I resize the container on some touch events, which makes it necessary to update this image on each of these touch events, which is very expensive in CPU cycles.

  I need the container to clip the elements it contains, giving a round border appearance. It has been suggested to me that in Java, it is possible by hiding the bitmap to the window, but this feature is not provided by Cascades.

  So, basically, you should post a request for such a device?

  I have not found a need for it and I don't know how many application developers want to play with the default layout and spacing of standard items - consistency is appreciated by the users.

  If you need it and may be useful, maybe it is. If so, you could add a feature request in Issue Tracker, if not perhaps wait until you have a good reason?

  Stuart

• Feature request: Save as... from the iPad to cloud Document.

  I'm looking for a way to save money... of the tablet to the document cloud.
  

  
  

  First quick background:

  I created a template on my laptop with Adobe Acrobat DC and saved this template to the Document cloud.

  -This model has text boxes to type and file boxes for quick selection.

  I then discovered the same model on my iPad.

  -So I can type in the text boxes and make selections in all deposit boxes.

  However, once I completed the template there is no save under... function, that's why my changes could not be saved to the Document cloud.

  On the bottom of the screen, there are four options - from left to right (I dunno what they are actually called):

  

  Glasses - comment - search button - button eyes Share/Transfer button

  When you click on the button to the right (square with the top arrow) there are four options:

  • Shared file
  • Link sharing Public
  • Open to...
  • Print document

  I'm looking for a fifth option: Save under...

  This feature allows you to record what you come to the new PDF format to the Document cloud.

  Finally, if this feature does not exist and I'm doing something wrong, please I need your help. If there is really no way to record under... of the tablet to the document cloud, maybe this function can be implemented in a future update.

  Thank you in advance,

  Hello

  Thanks for the feedback and the detailed explanation!

  Unfortunately, Acrobat Reader mobile products (for example, iOS, Android, Windows Phone) do not yet support the function "Save as."

  You submit a feature request form?

  Adobe - feature request/Bug Report Form

  Our product management team will receive a notification by e-mail and account of your feature request for a future version.

  Please note that there is a way to accomplish the same thing in the current version.  However, it is not as convenient as "save under".  Because it requires additional steps.

  1. Transfer the PDF original (i.e. your "template") from your laptop to your iPad using iTunes or 'Open In' iOS feature of Apple Mail.  See How to open PDF documents in Adobe Acrobat DC for iOS (iPad version).
     Your original PDF document will appear in the section "Local".
  2. Duplicate the original PDF document and rename it.  For more details, see procedure manage files in format Adobe Acrobat, DC for iOS .
  3. Open the copy (not the original).
  4. Make changes.
  5. Press the share button on the lower bar.
  6. Select 'Save Adobe Document cloud' to download on the Document cloud.

  Is this an acceptable workaround solution for now?

• Feature request: make the list "Ignored method" configurable from the GUI

  When the current generation, please edit Onyx.settings file for Add/Remove methods that should be ignored.

  This function can be made available in the GUI?

  BTW, when the Onyx does not read the file Onyx.settings? Only at startup? Or every time you start a capture?

  ____________

  Blog: LucD notes

  Twitter: lucd22

  Hi LucD,

  Thanks for the suggestion! I agree with you that it will be much more convenient if these settings can be changed in the GUI. I put your suggestion as a feature request in our database, and it will run in a future release.

  And to answer your question - the settings are loaded only at startup. However some of the changes made in the settings dialog box take effect immediately after save you them.

  Kind regards

  Ignat

• Feature Request (new); Adobe Bridge Cache Manager

  In Adobe Bridge, the Cache is still a problem and a huge memory hog. I asked for a good Manager to Cache more than 3 years while it was necessary to CS4.

  Now in CS6, I am disappointed that the cache in Bridge system has not changed. Why do you have a section in the Adobe Forums that asks the "feature request" and then ignore them?

  http://forums.Adobe.com/message/2652688#2652688

  "I would personally like a tool in the bridge that allows me to manage and control the Cache of more personal and effective manner. I would like a rocker that would keep 100% previews"in one folder for a period of time (1 day to 1 month) until the record cache is automatically purged. And an another rocker which would give me the opportunity to preserve permanently cache the selected folder (for example, an Important issue of portfolio or a folder of Images under management).

  As a photographer, I take and edit a large number of photos. When I import a photoshoot with 1 500 photos (not uncommom at all), I have the previews of bridge at 100%, but for only a limited period. Unfortunately, I forgot to serve the individual cache of this file, and the cache relies on a point made very slow Adobe Bridge CS4. I have to then to purge the Cache of the entire bridge in order to make the bridge run smooth.

  Adobe couldn't care less.

  Its sad but true. : (

• Check a feature request

  I was about to make a feature request in the dedicated forum, but decided first to post here to make sure that it is currently not possible.

  Rename multiple layers.

  Currently by selecting more than one layer in the Panel and choosing "Options for the selection" allows to change all other options, but not the name of the layer. Please activate the name changing, too, which should come with the automatic sequence number added at the end of the names.

  in the meantime the feature...

  Select an item in each layer to renamed before running the script.

  var idoc = app.activeDocument;
  var layerName = Window.prompt ("Enter Base Layer Name", "Layer-", "Rename Selected Layers");
  var postFixNum = Window.prompt ("Enter Starting sequence number", 1, "Rename Selected Layers");
  
  for (i=0; i		   

• Vote on SQL Developer feature requests

  I have been reviewing applications for features and the various statutes, must you always vote on those that are marked as accepted? I guess that Yes to give them more weight to get them looked at earlier? Are these marked rejects NEVER looked at again? What is the difference between those marked open and those that are marked in the expectation of the community Votes? These 2 articles are not the same thing?
  
  
  Thanks for your help.

  Evita,

  Yes, you can still vote on Accepted. (You can even vote for "programmed for immediate release... (', because sometimes you have to pass the characteristics from one version to another)

  Accepted means that it seems possible to do and we can do it, but 'when' has not been established. Please add votes to help this decision.
  Rejected Just that, we have no intention to do so. I don't revisit rejected on the Exchange.
  (However, some features that have been rejected have been discussed on the forum and we have reconsidered. We have also changed to "rejected" to "accepted" on various occasions, but only based on discussions here. Rejected features have very poor explanations of the problem that users are trying to solve)

  Open We haven't read or taken any decision on them.
  In the meantime the community vote means just that. Someone suggested a feature and no one seems interested. With the long list of features, we need to give priority and some requested features are dark, so we want more feedback from the community. More votes and feedback from Community aid. We sometimes get the 10 points of some people and zero for the same function.

  Please note that except for the features open, others we hit and add your comments.

  The problems I have with feature requests is the lack of clarity in the application and several applications described in a single request. Additional features are lost, and others may not vote on them.

  What

• Feature request: Awesomebar / bookmarks search strictly by tag

  Firefox needs to be able to search ONLY by tag, no content/title match.
  Web developer, I started tagging of bookmarks of sites user experience with the tag "UX". However, I am also a user of Linux with appropriate bookmarks. So, when I try to search both bookmarks or via awesomebar, "UX" brings up TWO points scored "UX" and anything with "Linux" in there. It would be good to have a symbol/prefix that restricts search to the STRICTLY tags, that would allow me to have only the UX elements upwards.

  Hello, you have identified a good point. However, this forum aims to provide support. The appropriate channel for feature request and submit bugs is Bugzilla - https://bugzilla.mozilla.org/

• Fill feature request AutoFill toolbar

  Hi, I am familiar with the current built-in autofill described in this article:
  https://support.Mozilla.org/en-us/KB/control-Firefox-automatically-fills-in-forms?ESAB=a & s = AutoFill & r = 0 & s = ACE #Firefox:Mac:fx29

  but I would like to put in a feature request to a similar to Safari, added toolbar button where you can click on the button to complete the entire form, rather than having to click and fill each field separately as the only option. It should also be able to click on each field as well, because it is a nice feature, but with the addition of a button and form preferences where you can enter form data to use for each field. I know there are modules for this (AutoComplete and Autofill Forms are the 2 best on the 4 I have installed and tested) but it would be good to have a built-in toolbar button.

  You can submit this 'feedback' here:
  https://input.Mozilla.org/en-us/feedback
  And the label as an enhancement request.

• Smart Actions App / Feature Request

  Great job on a motorcycle on the Smart Actions approx. better than spend $$ on some third-party app.

  Feature request: I would like to be able to settle only for 3G and 3 G/LTE.

  I couldn't find this feature available (only the control ON / OFF cellular data), but I think it would be beneficial to have the ability to automatically control between 3G and 4G. For example: 'Use 3G only when the screen is off', rather than be connected to 4 G when you do not use your phone. It can also add in some configurations of smart creative action as well.

  Excellent comments!

  Please continue the discussion here.

  Will lock this thread similar to consolidate your comments in a single thread.

  Mark
  Support Forums Manager

• Windows Developer Preview feature requests

  Original title: Windows 8 feature requests

  I have a bunch of ideas/requests for the new Windows 8. Where can I post those, so the team development or other authorized staff members can read them?

  Try the relevant MSDN forums here:

  Windows Developer Preview: OS General Questions

  Design of user interface for applications of metro style

  Customize your app Metro style for the equipment and devices

  Creating style Metro with HTML5/JavaScript applications

  Creating applications with C++ Metro style

  Creating style Metro with c# or VB applications

  Building games with DirectX Metro style

  Tools for metro style applications

  or any Building Windows 8 Blog (by the Windows engineering team) who are yet to accept comments.