Problems of bad video driver Y470P for Windows RDP

Similar Questions

• Video driver ATI for Windows 8 on HP DV6 3010sq - where?

  Hello, I have a big problem with video drivers on HP dv6 notebook 3010SQ - upgrade of Windows 8. I called HP Romania and had no idea of any problem of incompatibility with the new operating system at the time of purchase. Now there is no video drivers ATI for Windows 8. Official website of the manufacturer of the video card in question, tells me to contact the manufacturer to resolve the problem. Solutions? Assume that if this does not resolve the problem, we have invested in this unnecessary update...

  I took a peek at the software and drivers available on the portal of HP support for your laptop.

  As you have also discovered, Windows 8 pilots are not present.

  I looked at the document web site HP Windows 8 limitations\issues pre-staged at level.

  According to the review of this web document, your laptop has not been tested by HP with Windows 8.

  This means that HP is unable to provide instructions to upgrade or Windows 8 pilots. If you try to update, you may lose some basic functionality & stability. This is what you are currently facing.

  I hate to be the bearer of bad news, but this is the reason why you are having problems with the upgrade of Windows 8.

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• device driver Bluetooth for windows 7 64-bit sony vaio

  Hello

  I need device driver bluetooth for windows 7 64 bit for sony vaio

  device driver Bluetooth for windows 7 64-bit sony vaio

  Please help me

  -Nicolas

  After spending an obscene amount of time researching this Bluetooth stupid nonsense this week, I finally opted for a solution.

  This is how to solve the "Bluetooth peripheral device is not a driver:
  I use the following materials in a dozen different tests:
  -Only for Broadcom based on USB from Belkin and Targus dongles
  -Windows 7 Professional 64-bit on four different computers
  -4 different Bluetooth headphones: Plantronics One, a matrix and two Motorola
  -Bluetooth file transfer wasn't of interest, but I tested with two different phones
  This guide will be useful for those with similar... hardware configurations and for those who have tried all the other nonsense without result.  Especially that many times repeated "Just install Windows Mobile Device Manager."
  -- -- --
  Step 1: Ignore 99% of you think that you have learned about this problem.
  It will be * probably * boil down to a missing COM port.
  Step 2: Certainly ignore the bit about installing the Windows Mobile Device Center
  (Unless you have a Windows Mobile-based phone and/or have another use for a flavor of Windows 7 of Activesync).
  Step 3: Stop looking for a driver for something called a "Bluetooth device device.
  There is no such thing. If you look at the Bluetooth installation take place, you will notice that all the components of the Bluetooth technology initially as "Bluetooth Peripheral Device" and then once Windows ID each element, the appropriate driver is installed and the name replaces "Bluetooth Peripheral Device" to something like "Hands-free Bluetooth Audio" or "Bluetooth Remote Control" etc.
  -- -- --
  Unfortunately, most of the people reading this will have tried one or more of the following:
  1.) install this stupid Windows Mobile Device Center
  2.) install any number of drivers Bluetooth who-knows-what from who knows where
  (3.) running all kinds of utilities third driver
  4.), forcing several facilities from pilot to operate in Win98, XP or Vista
  5.) sacrificing countless animals
  The end result is a plethora of useless software and/or driver and/or updates... facilities and some dead animals.
  -- -- --
  Instead, here is the solution.  I tested it with three different USB Dongles (2 Belkin and Targus 1) and on four different machines: HP, Sony, Toshiba and another HP. Two were newly not framed with Windows 7 Professional 64-bit and two have been upgraded to Vista to the same OS.
  With each machine, I plugged the following helmets: a legend of Voyager from Plantronics, Motorola S9, Motorola S805 and matrix AF62 and a Samsung S3 and an HTC Android.
  So I guess it's fair to say that it is a solution for one of these dongles... but in reality, most based on Broadcomm USB dongles is affected. I ran across these stages in four different boxes after checking that the beast ""Bluetooth peripheral device is not a driver " "
  appeared during installation.
  1.) If you did any of the unsuccessful steps mentioned above, enter the control panel and delete everything that you have installed.  Kill all the entries Broadcomm or Widcomm bluetooth. Delete all 3 rd-party driver maintenance apps. Restart a machine clean.
  2.) locate and install a Broadcomm 6.0.1.6300 OR 6.2.1.500 driver.  Either one works, but the last (most recent) has much better management tools for Bluetooth device
  .  I tested the installation of separately and also starting with 6.0.1.6300 and then upgrade to 6.2.1.500.
  (Ignore the stupid Updater Driver Broadcomm they grow to their website - it is useless for the majority of us out there.)
  (3.) that you install one of the above, you will see a notification regarding the installation of the various components.  Click this pop-up window and watch the progress.  You will see that each "Bluetooth Peripheral Device" Gets a new name, as the related driver is installed.  In my tens + tests, each & every item at this point got the green check mark of success.
  4.) now attempt to pair the device of your choice
  .  IF only the manufacturer provides separate drivers, do not install them again, regardless of their instructions.  See how Windows gets its own.
  5.) as soon as the match starts, you will see more notifications for individual driver components.  Click on one of them and observe a similar progression... Except that you will have a ""Bluetooth Device device ' with the dreaded Red X and the complaint that no driver was found. "
  6.) do not despair
  ! This happens the first time connect you a new Bluetooth device.
  7.) wait for the installation to complete.  Despite the dialog box display the list of components of Bluetooth with a red X, you probably have another window saying that the perfectly paired Bluetooth device.  But you and I know that he didn't. Confidently click to close this dialog box.
  8.) open Device Manager (via the Control Panel, the computer properties), and you will discover that cursed Device Bluetooth that is sitting there in the Middle under 'other devices '.
  9.) right click on the Bluetooth device with the yellow exclamation mark under 'Other devices' and select 'Update Driver' - then:
  Click on:
  a.) browse my computer for driver software
  (b) let me pick from a list of device on my computer drivers
  (c.) in the common hardware types list, select:
  --->>> Ports (COM & LPT)<>
  d.) d.) under manufacturer, select Microsoft
  e.) depending on the model, choose "Standard Serial over Bluetooth Link" & click "next".
  f.) when you are prompted with the update driver warning, click 'yes '.
  g.) with joy to read the message that "Windows has updated the driver software.
  (h.) read for pleasure, and then click "close".
  (i.) to confirm that this disorder is really fixed (assuming compatible devices, etc.) Right-click on the Bluetooth device and choose "Troubleshoot" - that there should be no reported problem.
  10.) you shouldn't have to restart, but you POURRIEZ have need spend the power of your Bluetooth device Off & turn it on again to let it reconnect again (just NOT re-pair... re - connect). About a dozen tests, I had only to do once, and it was with a 3-year-old-Bluetooth headset.
  -- -- --
  I have argued my way in the solution by installing on a Vista machine where everything worked perfectly.  After the installation of various devices under Vista, I spotted the COM Port in Device Manager - which was the only element that did not appear in the installation of Windows 7... but instead remained at the dreaded 'Bluetooth Device device".
  Windows Mobile thing worked only for some people because it was fundamentally address a bunch of different physical possibilities... but for those who did not have success, it's because Windows Mobile Kitchen Sink approach did not include the driver Port com
  -- -- --
  Voluntarily, I don't understand not all links to the drivers as one.) change links and b.) I don't want to be responsible for some knucklehead packaging site a Trojan horse in the zip file.  Let Google your friend and your instinct be your guide.
  I will say that I used a 6.0.1.6300 directly from the Belkin site and a 6.2.1.500 directly from the site of the bridge.
  I hope this saves people a lot of frustration.

• looking for broadcom 802.11 b g n driver wlan for windows 7 (laptop model Pavilion 17-f058sr)

  Hello
  I use HP Pavilion 17-f058sr (ENERGY STAR),

  need to broadcom 802.11 b g n driver wlan for windows 7.
  WLAN driver for windows 8 cannot install in win7

  Hello:

  This is probably the wireless driver that you are interested in...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_133353_1 & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Specifications of product for your model page shows it comes with Bluetooth as well, so you'll also need this bluetooth driver...

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405371 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132205_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• HP 15-F004DX: Please provide driver wlan for windows 7

  Please provide driver wlan for windows 7

  Hello:

  According to the list of parts for your laptop, it has a Realtek RTL8188EE 802.11bg / n 1 x 1 WiFi adapter.

  It would be the driver W7 you interested...

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8188EE in the laptop models running a supported operating system.

  File name: sp69033.exe

• Windows 7 video driver NVIDIA for DV6500

  can anyone find a video driver for this model (DV6500) for Windows 7?

  Your system is with NVIDIA GeForce Go 7150 M (UMA). Try this driver:

  http://US.download.NVIDIA.com/Windows/179.48/179.48_notebook_winvista_win7_32bit_beta.exe

  If this does not work, perform the following steps:

  1.) go to control panel

  2.) turn on the Automatic Updates feature

  3.) download all updates.

  4.) install updates

• How can I update the Bad video card drivers in windows 7 for mindcraft?

  Wrong in windows video card drivers for mindcraft 7?   I am able to fix this?

  According to the report, you use XP, not Win7.

  To find on this graph that your machine uses to go to the start menu >
  Control Panel > system and click on the Hardware tab.
  Open the Device Manager and click on the graphics card.

  The first thing to do would be to update the drivers for your graphics card. They should be
  Downloaded from your computers manufacture web site if it's a laptop or a PC from a great
  company like HP or DELL, otherwise download the drivers from the site cards mfg.
  Uninstall the current drivers and after restart installed drivers that you have downloaded.

  "Minecraft could not start because it did not find an OpenGL accelerated."

  If you have Intel HD integrated graphics is my only is not supported OpenGL, or you may need to
  jump if some circles to use. The link below shows a method of activation
  OpenGL on XP, but apparently you need a disk to install to your machine.

  http://www.Intel.com/support/graphics/sb/CS-030331.htm

  The error report also mentions Java, but I don't know that is the problem or not.
  I wouldn't hurt to update Java in all cases. The link below will help you get started on this point,

  http://www.Java.com/en/download/help/java_update.XML
  .

• HP Pavilion g6-2399sa no driver ethernet for Windows 7 x 64

  Hello, I just bought this laptop with Windows 8 built in. I decided that I didn't like this Os so I installed Windows 7 instead. And now I can't find no driver or a suite of driver for it. I'm not able to use the Wlan because it detects the network adapter. Same problem with the video card and many other features. Is it all other ways to make it work on Windows 7? Thank you.

  Data sheet:

  AMD Quad - Core 10 - 4600M acceleration processor

  1 TB HARD DRIVE

  8192 MB DDR3 SDRAM

  WLAN

  I did a quick search and found this: http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/Hp655-WiFi-driver-cant-install/td-p/1945823

  Here is the driver posted in that thread:http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & swItem = ob-108905-1 & prodNameId = 5060882 & swEnvOID = 4052 & swLang = 13 & taskId = 135 & mode = 3

• New Beta of Nvidia driver version for Windows 8 & Win 7 304.79

  Hello

  NVIDIA as the new version of the beta driver 304.79 Verde for Windows 8, 7 [HERE | http://www.geforce.co.uk/drivers/results/46457 | water]

  Know that it's the Nvidia driver, not Toshiba drivder. also just the graphics and physics.

  Works well on my Qosmio X 870 with the GTX 670 M

  Concerning

  Thanks for this info...
  I guess that the use of these drivers may cause problems since it is just the BETA drivers

• Mobil HP Wi - Fi Direct (Bronze): updating mouse driver Wifi for Windows 10

  Hi, I have upgraded to windows 10 and now of course my WiFi mobile mouse does not work. I assumed that a driver would soon after Windows 10 release, but none have been as it appears to be published. Should I sell my WiFi mouse or should I wait for the drivers? I know that SoftAP is available in Windows 10, then, what is the hold up?

  There have not been any update of drivers for windows 8 so I think that there is one for windows 10

  I have the same problem and are getting desperate.

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Videos to Itunes for Windows Movie Maker

  How to make , I get my movies downloaded in Itunes for Windows Movie Maker.  Movies are movies downloaded from my camera at home.  I don't know how they got in Itunes, but I can't get out because of the encoder and I don't know how to solve this problem.  Help, please!  Thank you

  Hello

  I - tunes convert the video into a format I-tune, so you might not be able to view them in media player, I suggest you to copy the files to your system directly from the camera again.

  You can also consult the following link for assistance:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  For more information on importing files intoWindows Movie Maker , see the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.