features of vBundle/speed for physical host computers

Similar Questions

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• Monitor the physical host computers

  How to control the physical hosts with vFoglight 6.6?

  The cartridge of the infrastructure offers you the ability to monitor the physical host computers

  http://eDOCS.quest.com/vFoglight/66/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?href=cartridge/InfrastructureCartridge/index.php

  The process of creating agents and add hosts can be seen here

  http://eDOCS.quest.com/vFoglight/66/doc/cartridge/InfrastructureCartridge/UsingTheCartridge.02.3.php#416085

  Golan Shem-Tov

• DHCP server virtualized inaccessible by the physical host computers

  Hello.

  I set up a DHCP under VMware Server 2. It is accessible by the virtual machines on the same host, but not by physical machines on the network. They can ping its IP address, but do receive any DHCP offer at the start of it. Are there additional configurations that I have to look?  The VMware networking is configured in bridged mode.

  Thank you.

  Alinpastrama,

  What is the host operating system?

  Do you have any software firewall on the host?

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• How to activate the Clipboard sharing for shared virtual computers?

  Hi guys.

  Important note: this is VMWare Workstation.

  When I share a virtual machine in order to other guys in the network can control it, I lose the following capabilities:

  * the Clipboard sharing via VMWare tools

  * file drag and drop via VMWare tools

  * possibility of mounting isos of MY system from LOCAL FILES on the virtual computer DVD drives

  Someone knows how to re - activate these features?

  Many thanks in advance.

  You obviously not bothered to read the documentation! Here are some excerpts, referring to shared virtual machines...

  NOTE You cannot change to a shared virtual machine or remote model mode.

  Configure updates of specific for a Virtual Machine VMware tools...

  Use the VMware Tools default update behavior. The default behavior is defined in the preferences of the workstation.

  NOTE You cannot configure this option for a shared virtual machine or remotely.

  NOTE You can enable or disable drag - move to a shared virtual machine or remotely.

  NOTE You cannot enable or disable copy and paste functionality to a shared virtual machine or remotely.

  NOTE You cannot enable a shared folder to a shared virtual machine or remotely.

  NOTE You cannot map a virtual hard disk to a shared virtual machine or remote.

  NOTE You cannot add a printer to a shared virtual machine or remotely.

  NOTE You cannot configure a virtual machine shared or remote to display all USB input devices.

  Take or return to a snapshot at Power Off

  Take a new snapshot

  NOTE You cannot configure this option for a shared virtual machine or remotely.

  Configure power and control power settings Options

  3. Select a power option.

  NOTE You cannot configure these options for a shared virtual computer or remotely.

  6. Select the setting for the start control.

  NOTE You cannot configure startup for a shared virtual machine or remote control settings.

  NOTE You cannot configure a shared or remote virtual machine as a VNC server.

  NOTE use Workstation 10, you can change the hardware compatibility of a shared virtual computer or remotely. However, you cannot in low grade a virtual machine created previously.

  NOTE This command is not available for shared virtual computers, or remotely.

  Clean a VHD on Windows hosts

  Unlike the command to defragment and the shrink command provided by VMware Tools, clean it from the order of discs requires no any additional disk space on the host computer. Clean the disks command works directly on the files of virtual disk (hard).

  NOTE This command is not available for shared virtual computers, or remotely.

  Add a USB controller to a virtual machine

  NOTE shared and remote virtual machines are created without a default USB controller. You can add a USB controller manually when you have finished creating a shared virtual machine or remotely.

  4. set the USB connection settings.

  NOTE You can not usually set up USB connection to a shared virtual machine or remote settings.

  NOTE You cannot add a physical drive to a shared virtual machine or remotely.

  NOTE You cannot add a generic SCSI device to a shared virtual machine or remotely.

  NOTE You cannot configure the virtual keyboard improved to a shared virtual machine or remote setting.

  NOTE You cannot configure advanced settings of the virtual adapter to a shared or remote virtual machine.

• LaserJet full Scrub steps for no HP computers only

  When you uninstall the HP, not all components printing software is uninstalled.  This can block a resettlement, or prevent a problem solved.  In this case, you will need to do a complete scrub of the software of the printer from the system.  Here are the steps for software Non-HP computers Laserjet scrubbin.  If you use the following steps on a HP computer, you run the risk of deleting important computer components.

  LaserJet full uninstall steps for No HP computers:

  1. Click on the Start Menu.
  2. Click on Control Panel.
  3. Open Add or remove programs.
  4. Delete all HP software.
  5. Click on the Start Menu.
  6. Click devices and printers.
  7. Right click on your printer.
  8. Select remove device.
  9. Select any printer in the folder.
  10. Click on server properties in the upper part of the window.
  11. Click the tab drivers.
  12. Remove all instances of the printer in the list.
  13. Click on the start menu.
  14. Click computer / my computer.
  15. Right-click on the C: drive.
  16. Select Properties.
  17. Click Disk Cleanup.
  18. Once disk cleanup is done scanning, ensure that all options are selected.
  19. Click OK.
  20. Click on delete files if requested.
  21. Restart the computer.
  22. Access to program files.
  23. Remove all HP/Hewlett Packard folders.
  24. For 64-bit computers, access program (x 86)
  25. Remove all HP/Hewlett Packard folders.
  26. Click on the start menu.
  27. Click run.
  28. Type %appdata%\microsoft\windows\sendto in the Run dialog box and click OK.
  29. Remove all HP/Hewlett Packard folders.
  30. Click on the start menu.
  31. Click run.
  32. Programdata % in the Run dialog box and click OK.  Note: This location will there be in Windows Vista and above.
  33. Remove all HP/Hewlett Packard folders.
  34. Click on the start menu.
  35. Click run.
  36. Type regedit in the Run dialog box and click OK.
  37. Remove any HP/Hewlett Packard folders or the registry keys.
  38. Restart the computer.
  39. Follow steps 13-20 to do a disk cleanup.
  40. Download and install the latest version of Adobe flash player

      http://www.Adobe.com/support/flashplayer/downloads.html

  41. Use this tool to clean the system and the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.  This step is optional.   You can skip if you want.

      http://download.CNET.com/advanced-SystemCare/3000-2086_4-10407614.HTML?part=DL-6271865&Subj=DL&tag=b...

  42. Download the drivers and full software features on the HP Support Site.

      http://WWW8.HP.com/us/en/support-drivers.html

  43. Start the installation.

  I hope this helps.

• Windows 7 poster waiting for the host window for spot on the restart or shutdown

  Every time I have shut down or restart my computer, I get a screen that says "Waiting for task host window" I tried to clean the registry, I did a chkdsk, I ran sfc/scannow several times now and this issue will not go away.  I am running Windows 7 64-bit with 4 GB of ram. I also tried to apply the patch, but I always get "this update is not applicable to your computer."

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you done any hardware or software changes to your computer recently?
  2. What is the brand and model of your computer?

  'The Taskhost' is a generic process, which acts as a host for the processes that run "DLLs" rather than "Exe". Starts, it checks the registry services part to build a list of the DLL-based services it needs to load, then load them.

  I suggest you try using the steps in this Microsoft support article and check if it helps.
  Reference:
  Why my computer won't turn on or off quickly?
  http://Windows.Microsoft.com/en-us/Windows/computer-wont-turn-on-off-quickly#1TC=Windows-7

  In addition, you can view the details on the performance of the computer of the Task Manager.
  Reference:
  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows7/see-details-about-your-computers-performance-using-Task-Manager

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Using POS for physical servers

  I'm looking for details on the features of backup of POS for physical servers.

  VMWare documentation indicates application agents support support for physical backup SQL, Exchange, and Sharepoint servers.  I'm trying to know if POS can also get a filesystem backup for file servers and other applications that are not SQL, Exchange or Sharepoint.

  Can VDP save system files from one physical server?

  The documentation is correct. VIENNA can only backup physical systems using the SQL, stockbrokers & Sharepoint. It is not a way to back up a physical file using VIENNA server.

  Does that answer your question?

• ESXi 5.5u1 - serial number physical host in virtual machine

  I was happy to see in 5.5 update 1 release notes that it should be possible to switch the serial number of the host through a virtual machine hardware.

  • Allow virtual machines to display the serial number of the physical host
    Virtual machines cannot reflect the physical hosts ESXi serial numbers.
    • This issue is fixed in this version.

  Does anyone know how to enable this for a new or existing virtual computer?

  I had problems in the past with Apple Push Notification Services expects a Mac serial number. I hope that I can now spend series a Mac Pro to the host through a virtual machine.

  Someone at - it experience or knowledge to implement this? Thank you!

  Hi DJLambertand welcome to the VMware communities!

  If you want a prompt of OS X to use the serial number of the host, you will need to add this option to the virtual machine configuration:

  serialNumber.reflectHost = 'TRUE '.

  or, if you want a prompt of OS X to use the model of host hardware ID (learn "MacPro5, 1"), ID (i.e. "Mac-12345678" ") and the serial number all all aboard:

  smbios.reflectHost = 'TRUE '.

  will take care of all three.  Note that there is no way to understand or control what happens if you have multiple virtual machines with the same serial number and using this external serial number as an identifier.

  Let us know if you have problems with these options!  I'm not sure whether they will solve the problem you face, but... For example, there are more problems iMessage running in a virtual machine...

  See you soon,.

  --

  Darius

• The number of heartbeat for the host data warehouses is 0, which is less than required: 2

  Hello

  I have trouble creating my DRS cluster + storage of DRS, I have 3 hosts esxi 5.1 for the task

  First, I created the cluster, no problem with that, so the DRS storage was created and now I can see in the Summary tab

  "The number of heartbeat for the host data warehouses is 0, which is less than required: 2".

  I search the Web and there are similar problems when people has only a single data store (the one that came with ESXi) and need to add another but in my case... vcenter detects any...

  In the views of storage I see the store of data (VMFS) but for some strange reason the cluster not

  In order to achieve data warehouses minimum (2) can I create an NFS and map it in THE 3 esxi hosts? Vcenter which consider a play config?

  Thank you

  You probably only have local data warehouses, which are not that HA would require for this feature (pulsations datastore) to work properly.

  You will need either 2 iSCSI, FC 2 or 2 NFS volumes... Or a combination of the any of them, for this feature to work. If you don't want to use this feature, you can also turn it off:

  http://www.yellow-bricks.com/2012/04/05/the-number-of-vSphere-HA-heartbeat-datastores-for-this-host-is-1-which-is-less-than-required-2/

• where and how much Vcenter must be installed? as a virtual machine or physical host? -config is 2xESXi40 - CX4 - 120 1xEMC2 - DAS mode

  "BEST PRACTICE RECOMMENDATION.

  I work with 1 ESXi40 in DAS mode very good and everything is fine.

  I have still a few servers production of Phisical aditional to be virtualized, but before that

  We cultivate our virtual infrastructure by adding a second Esxi40 and installing the Virtual Center software and license to use HA, Vmotion, etc..

  the questions and the thing is, if I'm migrating all my hosts physic to the VMs system, do I need a new physical server to install Virtual Center, yes or no.

  and why?

  If this is not the case, the Vcenter can be virtualized, and what is the best practice to do this.

  which of the following configuration might be valid, the best recommendation and why and why not.

  (a) create 1 Vcenter VM, located in a data store on the hard drive that comes a host of Esxi40

  (b) create 1 Vcenter VM, created storage located in a data store that comes from the CX4-120, and the group contains 1 ESXi40 physical host

  (c) create 1 Vcenter VM, created storage located in a data store that comes from the CX4-120, and the group contains 2 ESXi40 physical hosts

  (d) create 2 Vcenter VW, created storage located in a data store that comes from the CX4-120, and the group contains 1 ESXi40 physical host

  (c) create 2 Vcenter VM, located in a data store that comes from the CX4 - 120, ahd, the storage group created containds 2 ESXi40 physical hosts

  Thank you

  MC.

  You're too complicate things...

  Do the vCenter as a virtual machine, which gives the requirements for processors, RAM, etc... Place it on a data store available to BOTH hosts. In fact, I would make sure that ALL s LUN where sit all VM are available for BOTH ESXi servers.

  I recommend also using a full SQL Server for the db, is not using SQL Express. If you have a SQL 2005 server, use it. If you want to future proof, vCenter things, put on a 64 bit OS (so you're ready for vCenter 4.1 and ESXi 4.1). Having the SQL database on a real SQL Server (other than the server vCenter Server/VM) makes things a lot easier on the road...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• How to slow down the audio Windows Player speed, for language learning purposes?

  How to slow down the audio Windows Player speed, for language learning purposes?

  I assume you mean videos with speeches.

  1. start playback of the video.

  2 right click on the video then go it to improvements then the playback speed settings.

  You can control the speed of this Panel.

• A 1066 x card CF there a difference in speed for a 800 x on a 5 d Mark II?

  A 1066 x card CF there a difference in speed for a 800 x on a 5 d Mark II? Is there a limiting factor that I should have in mind in order to avoid unnecessary expense?

  Sorry, I missed that in your first post. Here is the data for the 5 d Mk II: http://www.robgalbraith.com/camera_wb_multi_paged527.html?cid=6007-9784

  (the drop-down list at the top allows you to choose among many different cameras)

  With a 400 x 60 Mbps card the maximum at about 30 MB/s write speed.

  With a 1000 x 150 MB/sec card the maximum at about 50 MB/sec write speed.

• Is there an ETA for carrying portable computers of Windows 8 Pro?

  I am looking for a new laptop and I want to know:

  Is there an ETA for carrying portable computers of Windows 8 Pro?

  Official launch of Windows is on October 26, 2012. You can have notebooks with WIndows 8 from this day there.