Features of WCS and order info

Similar Questions

• WCS and co-located IAS

  I want to install the configuration wireless unified, 6500 WISN card-based. I'll also install MS IAS server and PDC additioanal just to authenticate wireless clients ONLY. I also try to install the WCS Server also on the same server. What would be the possible isseus with this scenario?

  The thing is, it will work, but it will not support if you have any questions and you call TACS. In addition, according to the number of users will be the IAS server authentication or if you use IAS for othere features of RADIUS, look on the box operation. WCS with several wlc, cards and other stuff could really slow down the box. If you're willing to try, I suggest putting IAS on the first and who, in the image then the box stall WCS and installation and configuration of the who. If you are good with performance and you have no problems, then you should be good to go with this configuration.

• Message box blackBerry 10 bottom Z10 with cpu and memory info.

  I noticed a message box at the bottom of the screen that has info on the device such as the States of C CPU power and memory info. It doesn't go away with a traction battery, or soft reboot. I've never seen anything like this in the forums before... anyone know what it is? I have attached a picture.

  OS - 10.3.1.634

  STL 100-4 on Verizon

  Use the Web when it first appeared.

  Thanks for the responses... I reload the os when I'm home.

  It is a diagnostic screen that appears in the earliest versions of development of an operating system.  It is an overlay and does not appear in the screenshots.

  You need a much more recent version 10.3.1.  a version of 900 or higher got rid of this screen for good.

  Make a diagonal cut on your battery icon in the upper left corner.  It will be a chart after forcing the screen to refresh by dragging a page more.  Drag the icon of the battery again, and it should disappear completely with an another refresh of the screen.

  Every time the battery will scroll the display of text-box/graph-box/nothing in this diagnostic box.

  It is possible that I got the wrong order, so it could disappear after one kick and then come back with the chart area first coup, so just keep at home.

  But, again, just get 10.3.1.2744 if you do not want to go to 10.3.2 immediately.  You obviouly know how to use an automatic charger since you could not get 10.3.1.634 on your phone otherwise - that the operating system has never been a release of the carrier and was leaking to all about September or October of last year.

• Battery and Wifi info not displayed after updating IOS 10

  After upgrading to IOS 10 I have more information at the top of my home screen line. He comes to the line with WiFi, battery, and other info. I see it if I open an application, only some however. This status being lost, it is difficult to look at the life of the battery.

  How do I turn it back on?

  If it cannot be enabled by the user, then Apple needs to bring him back.

  David

  Hello! You can activate the in your settings. Go to battery and select on the percentage. The other options that are displayed on this bar, you can also turn on in general settings. Make sure that the WIFI is enabled in the settings. I had this happen before. After trying your settings, if you still do not see the bar with all the status restart the device. If it still does not work, you can try to recover the device on iTunes. The last resort would be to call the Apple support. I'll try to fix it in the settings that the lines may be busy.

• Need to HARD drive manufacturing date and warranty info

  I have a Toshiba hard drive installed in my computer apple laptop by a company and I would like to know the news about it, like the date of manufacture and warranty info, disk hard P/N: MK7559GSXF and S/N: Y177COWMT

  Any body could help me get this information that I looked everywhere on the Internet from Toshiba sites and tried to communicate with their agents in the Middle East and Egypt, but did not answer, and sometimes email returns an error of delivery failure!

  I think that they must update their officers contact list

  Hello

  I can't help you with the manufacturer's data, but security always begins with the date of purchase

  Usually the Toshiba Unitdetails page www.toshiba-tro.de/unitdetails provides all the portable product info, but it seems that it s not working don't not with your serial number.

• Why the continuous measurement and Logging in LabVIEW 2012 Project uses strings instead of Enums and orders from the queue?

  Hello!

  I noticed that the continuous measurement and a project in LabVIEW 2012 Logging using chains instead of enums and orders from the queue. I wonder if there is a good reason for it?

  Kind regards

  Anguel

  First, string vs enum debate is probably the version of LabVIEW vim vs emacs. There are good arguments on both sides, and I doubt that there is always a "winner".

  A brief summary of our reasoning for the current state of the project examples:

  1. We used enums for the state machine because it is self-contained. A state machine will never tell himself to enter a State, he does not know. Knowing (as the programmer) all possible States with the help of an enum allows you to enlist the compiler in order to help us avoid mistakes to change the time (because you can't quite out an enum and LabVIEW can be said if you are not covering all cases to a structure of the case, etc..).

     Enums provide greater protection and rigidity by ensuring all withdrew at the time of publishing. This is often the 'default' recommendation that we do.

  2. We used strings for messages in queue manager because the producer of message and the message handler could be independent processes that are reused or traded. Channels avoid the need for the compiler to be able to connect the orders and push this responsibility to the programmer. This allows you to develop some sub-components independently as long as you agree to a series of channel commands that you can manage - you need not to share a file 'messages.ctl' or 'states.ctl '. It is conceivable a loop of message management a message it does not, how you can decide to either silently ignore it or will trigger an error (as we do in the model). The strings make it also easier if you want to swap the queues of LabVIEW outside by a TCP implementation for network vacilitate or intra-Processuse communication where the other end may or may not be written in LabVIEW.

     Channels to provide more flexibility (that is, you can add new commands to an existing via plugins system, you can pass parameters as part of the string, etc.) at the expense of pushing her potential errors at run time and to put more responsibility on the programmer.

  3. The actor's gifts frame a 3rd option - using classes such as messages. For me, it combines many of the advantages of these two enumerations (strictly typed, change errors) and strings (flexible and scalable), but with the disadvantage of being somewhat less transparent (you understand OO, be comfortable to navigate through a multitude of screws, legacy of understanding, etc.).

  I don't know there are other reasons, others to the breast OR had or seen as we validated models and examples of projects in-house, but here are my reasons. We know that we can not design for each situation there - our goal is to get useful models against new users to make them aware of what well thought LabVIEW programs are similar to experienced users know their applications better and I hope they do not hesitate to change what we provide or create their own designs, when they feel it's necessary. (On a side note, please share what you come up with - a community of experts sharing models would be really useful to us all LabVIEW users).

  Best regards

  Simon

• drivers for my inspiron e1505, and order

  Need drivers and order for inspiron e1505

  douglasbrooksXB,

  Go to the Dell warranty status , enter your service tag, click the original configuration. Everything must be registered to know which video you and card wireless network. If you have an Intel card, install them before the other brand (if there is one. I know that on some models later, need Intel drivers installed before the nVidia drivers.

  I would install the Dell system software and chipset drivers.

  Then, install the ethernet drivers and your adapter wireless, followed by Dell Quickset. Then, you can get online to install video and audio drivers without problem.

  Rick

• WLC, WCS and WCS Navigator

  I would like to know what is the difference between wireless Lan controller and controller wireless system.

  I need WLC if I want to deploy WCS.

  Can I use WCS without wireless LAN controllers?

  What is the diference between WCS and WCS Navigator?

  And just to add WCS navigator is used to group multiple instances of WCS. This would serve in a very large deployment (in thousands of controllers).

  -Mike

  http://CS-Mars.blogspot.com

• 5.2 WCS and ACS 4.2

  Is it possible to get the admin of WCS users authenticated on GBA? I was not able to make it work and I found a page of FAQ http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#apr6

  say it is not supported. Is this correct? As I was not able to get the WCS to authenticate to the ACS. I don't get passed or failed attempts. The ACS is currently authenticate other users / devices and the GBA and WCS can both communicate with each other.

  You can integrate the WCS and ACS for local users of WCS.

  Add WCS to an ACS server:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1064286

  Configuration of the server credentials ACS View:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2mon.html#wpmkr1171779

  Configuration of RADIUS servers:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1054014

  GANYMEDE server configuration:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1053935

  Import tasks in ACS:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1064285

• In one of the inDesign tutorials instructor pulls up what looks like an application bar that contains among other things a text editor to cut and paste the copy into the inDesign project.  That is a feature of inDesign, and how is it accessible?

  In one of the inDesign tutorials instructor pulls up what looks like an application bar that contains among other things a text editor to cut and paste the copy into the inDesign project.  That is a feature of inDesign, and how is it accessible?

  The instructor used the App Switcher on Mac to switch to a text editor and copy this text editor text. InDesign is not the active application.

• Recently ordered (and order confirmed) "Plan of creative photography of Cloud (one year). I want to cancel it, but during the procedure, I do not even the option "Cancel". How should I proceed?

  Recently ordered (and order confirmed) "Plan of creative photography of Cloud (one year). I want to cancel it, but during the procedure, I do not even the option "Cancel". How should I proceed?

  In order to cancel the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• HELP ME IN CHARGE OF THE ELEMENTS 13 HAVE SERIAL NUMBER AND ORDER NUMBER

  ABDEL

  I NEED HELP TO DOWNLOAD ITEMS 13 HAVE SER NUMBER AND ORDER NUMBER

• Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Flow of work and order reports

  Hello.

  I'll put up a site of fresh produce from small e-commerce site. I have a workflow problem. The site is intended as a sale chanel for different farmers. Each farm products have their a catalog (and sub catalogues). I have 2 problems.

  1. How can I configure the workflow - I would like the system to notify the farmer when users produced good order its catalog. I can do this whith the option of provider in product description settings?

  2. how to export a report for orders just for a catalog of farmers. I have problems with the exported reports. I need reports not only note wich customer something orderd but what he ordered and in what quantaties, thus. Is it still possible?

  TNX

  How can I configure the workflow - I would like the system to notify the farmer when users produced good order its catalog. I can do this whith the option of provider in product description settings?

  Yes. You enable drop shipping. See this article for details http://kb.worldsecuresystems.com/837/cpsid_83718.html

  How to export a report for orders just for a catalog of farmers. I have problems with the exported reports. I need reports not only note wich customer something orderd but what he ordered and in what quantaties, thus. Is it still possible?

  Try the customers and orders report, but would not be possible. You may need to implement an application that connect via API, pull on e-commerce and CRM data and produce this report for you. See this article for details http://kb.worldsecuresystems.com/635/bc_635.html API

  m