Features Windows Lab SMU-1082

Similar Questions

• Automation explore virtual SMU-1082

  I have just ordered a PXI system of NOR and want to start programming while I wait for delivery. I thought that I could create virtual devices SMU to do this, but I could be wrong in my understanding of the MAX program.  While I have used LabVIEW for almost a decade, I never needed to use "measurement and Automation Explorer."

  When I chose "create new" under "devices and interface" "Simules NOR-DAQmx..." ", I couldn't find the SMU-1082 chassis or the module(PXIe-8840) of base I will use.  Am I going about this all wrong?

  Thank you for your help,

  Ron

  Hi Ron,

  Unfortuantely, you will not be able to simulate a chassis SMU or controller in MAX. The SMU chassis will automatically identify in MAX when you plug on your computer, while some of our former PXI chassis will have to manually identify. If you want to simulate a chassis, you can simulate a PXI chassis and put your modules SMU simulated in it.

  The good news is that you don't need to simulate a chassis in order to simulate a card. To simulate the 4304 to the MAX:

  1. Click devices and Interfaces
  
  
  2. Select create new...
  
  
  3. Select the simulated device NOR-DAQmx or modular Instrument
  
  
  4. You can search for 4304 and select the module.

  I will note, the SMU-4304 is first supported in our driver NOR-DAQmx 15.1.1. If you have an older version of DAQmx installed, the device does not appear as an option in MAX.

• Problem sending trigger software through backplane PXI (chassis SMU-1082, SMU-6363 DAQ, SMU-6544-HS-DIO)

  Dear community,

  I am trying to implement a background basket (software) PXI trigger on a chassis NI SMU-1082 with LabView 2015 (32-bit) running on an SMU-8135:

  HS-DIO (SMU-6544) in slot 2,

  -Acquisition of data (SMU-6363) into the Groove 4,

  -Flex RIO (SMU-7962R + OR-6583) in the Groove 3.

  The trigger schema is explained in the attached file ' LV-PXItrig-HSDIO-DAQ - overview.jpg ".

  Scenario 1: written DAQ analog signal and sends signals trigger HS-DIO (software) through bottom of basket, after East of waveform of the complete signals to DAQ for acquisition.

  Scenario 2: logical impulse on an external port HS-DIO triggers signals HS-DIO, after HS-DIO waveform is complete DAQ triggered for the acquisition of the ADC by the backplane.

  In principle this breaks down to send a trigger of module A to B by PXI backplane. The SMU-1082 chassis has a bus trip with 8 lines (PXI_trigX, X = 0,..., 7) more a trigger in Star controlled the slot 2.

  I've linked to implement a software trigger, but I can't access the refreshing resource and execution, see the attachment. Other ways of implementation including the DAQmx Terminal / routine disconnect Terminal have not worked for me either. I am aware about the connection of trigger using the node property VISA but I can't make a trigger.

  Tips, comments or solutions are appreciated. Thank you!

  For scenario 1, you want to trigger the HSDIO acquisition to begin as soon as the analog output DAQ starts?  You can use DAQmx Export Signal to send the trigger for the start of one of the lines from the Trig PXI backplane. Then, you need to configure your HSDIO acquisition to use a trigger digital beginning on the same line of trigger. Take a look at the example of the "Dynamic hardware generation start trigger" in the Finder of the example (help > find examples)

  For scenario 2, looks like you do a dynamic unit HSDIO generation when a digital trigger arrives on one of the PFI lines. Once the build is complete, you want to send a trigger for the DAQ hardware to begin sampling. If this is the case, you again use a trigger to start material in your task of NOR-HSDIO, as you did for scenario 1, but use external trig line as the source, rather than the bottom of basket. There is no case of material when the build is finished, but you can use a marker in script mode event instead. The example of the Generation with dynamic event marker' in the example Finder gives a good starting point for this type of operation. You'll want to set the output terminal for the event to be a line of backplane trig, and then tap the DAQmx to start on the same line trig trigger.

• enable or disable windows features window is empty

  While trying to solve my problem installing .NET 3.5 SP1, I found that my features window is empty.  Any ideas?

  Hello

  Please follow the steps here:

  http://support.Microsoft.com/kb/931712

  Resolve issues?

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Want to install IIS, but the "Programs and features" window is empty

  I am running Vista Home Premium Service Pack 2. I want to install IIS. When I go to the Programs window and click on "turn Windows features On or Off", the "Windows features" window is completely empty. Thanks for any help.

  I am running Vista Home Premium Service Pack 2. I want to install IIS. When I go to the Programs window and click on "turn Windows features On or Off", the "Windows features" window is completely empty. Thanks for any help.

  Take a look at this Microsoft Support tutorial
  Turn features on or off - Windows features dialog box is empty
  http://support.Microsoft.com/kb/931712 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Install Windows on SMU-8133 (with time real operating system already installed)

  Hi all

  I have an SMU-8133 NI with a real-time operating system (OR Real - Time PharLap 13.1). Now I want to install Windows on it and make it dual-boot (I want to keep the original real time operating system). So my question is how do I install Windows without erasing the current real time operating system?

  I tried to just install Win7 (starting from USB) but it says "Windows cannot be installed on disk 0 Partition 1" because she needs NTFS (what we have is the FAT I think). If Win7 is unavailable, Windows XP is also correct, but I still prefer Win7.

  

  Thank you!

  As a general rule, Windows don't play well with other operating systems installed on a drive, there will be some efforts to preserve the existing installation of RT OS if it is a requirement.  The simplest approach would be to wipe the entire disk, installing Windows and then reinstall LabVIEW RT.

  If you can start from scratch, you must first make sure that the partitioning is correct.  Since you did not purchase this as a Windows / controller dual boot RT initially, you do not have Windows installation media OR, correctly configure the partitions from disk for you.  You will need to do this manually during the installation of Windows.  The best approach is to create two partitions, one for the RT and a Windows.  RT the partition must be the first partition on the disk.  Install Windows on the second partition.  Once Windows is installed, convert the 1st partition to FAT32 using the built in Windows or a 3rd party partitioning tool utilities.  You should now have a system with Windows installed correctly and ready to be fitted to RT.

  Change your SMU-8133 to boot RT using the BIOS Setup menu or hardware DIP switch.  It should boot to safemode RT.  From another host PC, find your target in MAX.

  You can now put your target if you want to switch to the FAT32 file system the system of dependency files.  You can do this through MAX, or by using the utility RT USB key.  See herefor details on this step.

  Warning: Before doing this, ensure a MAXIMUM target shows already the correct amount of disk space for partition 1, you created.  If the RT operating system can see a usable partition (FAT32 or dependency) it will set up only that partition by avoiding to touch the rest of the disc.  If the 1st partition is not used, the formatting process will claim rather all of the disk because no usable partition has been found, and you may lose your Windows installation.

  After that, you can perform the installation of the RT of MAX software as usual.

  If you try to preserve your existing installation, you can try to combine the above process with one of the options available for the creation and restoration of RT disk images, although I am not very familiar with these tools and can not comment or creating an image on a single disk partition and restaurant then a disc multi-partition will be successful.  Here is a good linkto start with which describes the options available.

  -JoshH

• By default the password administrator Windows XP SMU-1062 q controller

  My SMU controller has been installed and configured with LabView (I guess) to OR. The operating system is Windows XP, what is the administrator password has been set during this process? That is, how can I connect to the controller for the first time.

  Thank you

  Ian

  Try this:

  http://www.mydigitallife.info/2006/11/25/easily-login-to-Windows-XP-with-no-password-administrator-a...

  Basically, you press ctrl-alt-delete twice when you get the login screen. I hope that the administrator password has not really been defined, so you can just press ok or enter.

  This is what I found on two used PXI systems that I bought at auction.

  Because it's so simple, I highly recommend setting an admin password as soon as you can.

  Concerning

• Empty Windows features window for Vista Ultimate

  I tried all the solutions provided in the Microsoft Web site using links below.

  I installed the analysis tool and installed the hotfix. but still does not.
  http://support.Microsoft.com/kb/931712
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/blank-Windows-features-box/74341068-b3ff-448A-84db-73cf2341276a
  I also tried changing the display settings, update of flash player, restart the system... all that...
  or, please help me to install IIS with another option.
  -Kumar

  Kumar, use links below

  http://www.Raymond.CC/blog/fix-blank-or-empty-list-in-Vista-turn-Windows-features-on-or-off-optionalfeaturesexe/
  For permission to remove the registry editor
  http://www.Raymond.CC/blog/full-control-permission-to-delete-or-edit-restricted-Windows-registry/

• Restore the settings of the features Windows "power"?

  I turned 'on' all the checkboxes in Windows features (configuration/program Panel).  Oops!  Now I don't know which ones is sure to turn back 'off '.  Is there a restore of the system for that?  I use Windows Vista on my laptop (two years).  I mainly create docs, save photos, social media, surf the internet.  I'm crocheting in the our internet router wireless.

  If there is no way to restore the default. Can I get some advice on what needs to be checked "on"?  I think that about 1/3 items were before I messed with them.  Sigh...

  Thank you!

  There is a list here:

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-feature-guide/

• Install Fax and scan component. Followed the instructions, but there is no 'SCAN of WINDOWS AND FAX' checkbox in the "WINDOWS FEATURES" window

  I followed the "install, configure and send faxes in windows vista" page, but there was no "windows fax and scan" box in the pop-up "Windows features". I have a modem-fax HDAUDIO soft data installed.

  You don't say what version of Vista you have.

  http://www.Microsoft.com/Windows/Windows-Vista/features/fax-scan.aspx

  Home editions of Vista have NO FAX features.

  You need 3rd Party Software: http://www.snapfiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot turn any featurs windows enable or disable in Vista Ultimate

  Somehow, the Tablet PC features have been enabled. I tried to remove them by using Add or remove windows features. After about half an hour, I get "an error has occurred. Not all features have been changed successfully. »

  To narrow down the problem, I tried to uninstall the other features of windows, such as Ultimate Extras. Once again, the same error message.

  I followed the advice in similar topics on components for re-registration, etc., but not luck. For the heck of it, I tried to delete a component on an another Vista PC in my house and got exactly the same result. I tried with and without, running Norton Antivirus - same result.

  This feature works at all? Aren't things like this test? It's * very * frustrating to always be spendign time for my operating system works only to do my current job! I wish that MS would realize that the OS should fade into the background, does not require that a lot of work and maintenance to do even the simplest of tasks!

  Hello

  How to enable Windows features turn on or off in Vista
  http://www.Vistax64.com/tutorials/67732-Windows-features.html

  -------------------------------------------------------

  More if necessary:

  How to activate the Narrator or disable in Vista
  http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html how do I turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  How do I change the keyboard to the screen on or off in Vista
  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  How to enable Windows features turn on or off in Vista
  http://www.Vistax64.com/tutorials/67732-Windows-features.html

  Disable ease of access button on the Vista login screen
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-ease-of-access-button-on-Vista-logon-screen/

  Ease of access Disabler - free - a small program that shows how disable the annoying ease of access button on the
  Vista login screen.
  http://www.Softpedia.com/get/tweak/system-tweak/ease-of-access-disabler.shtml

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Hyper-V is not in "Turn windows features" Windows 7 Pro

  Okay, I want that Hyper-V installed and working! I have Windows 7 Pro, it should in turn be and disable windows features? Right? But this is not... Help!

  Customer of Hyper-V is available in Windows 8 Pro and Windows 10 Pro. Thus, you will need to upgrade to a later version, and then activate it.

  • How to configure a virtual machine using the Hyper-V technology

  You can use Virtual Box as an alternative.

• Impossible to activate Active Directory users and computers (and other features Windows AD)

  I have Windows 7 Professional Service Pack 1 and I installed the Remote Server Administration Tools, but when I go to the program and features-> turn Windows features on / off power and try to check the choice of Active Directory, and then click OK it attempts to install, but then a window pops up with the message "an error has occurred. Not all the features where successfully changed. "This happens on 2 different installations of Windows 7 I have and I can not find newspapers or additional information anywhere to help me understand why this is the case.

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Configure the features Windows problem

  I recently baught a Ge70 MSI computer laptop and Windows 8 has been the bane of my life. Whenever I try to restart / stop, she wants to configure Windows features. He'll stick on 15% for 20 minutes and then do something, when it loads up, it'll stick on 35% for what feels like an eternity. I checked and all updates are installed, I also spent time checking the forums for a solution, any idea what could be the cause because it's starting to become a problem. Thanks in advance!

  Reboot full stop/start work and fine now after manually forcing the update of the Intel HD Graphics driver 4000 option. The update of the Intel Management Engine Interface driver has also made the same day one of them may have solved the problem.

• Coexistence with new security features Windows 10

  Hi all

  The release of Windows 10 has introduced several new security features that are of particular interest to those of us who work on secure networks. In particular, System guard and custody of credential (single user Mode). Together, these features provide what Microsoft calls based on virtualization security. Should take the time to read about both of these features for technical details, but at a high level, they protect code integrity and credential theft respectively to virtualize the greater part of the BONE with a small "core course" and "user-mode" secure being charged to enforce the relevant security checks in the rest of the system. The idea is that the compromise from the underlying OS, even up to and including kernel privileges mode, should not undermine the protections these features can provide short of a feat of hypervisor as the security of the system is running to a privilege level higher than the rest of the operating system, including the core NT itself.

  The problem is that both of these features need Hyper-V to be activated, because they are built on top of virtualization technology that it provides. It is a problem for VMware Workstation as it refuses to run when the Hyper-V is turned on. Only VMware has plans to support coexistence with Hyper-V in some contexts? Especially wrt. support for systems where the device and/or custody of the credentials are activated? Is there no work around not official/not supported to use VMware Workstation without having to remove these features?

  Thanks in advance,

  -SDL

  If Hyper-V virtualizes the features of virtualization assisted by the underlying processor hardware, it will be possible to run VMware Workstation VMs nested under Hyper-V, but the performance will probably not very good.