Fedora 17 office is different under VMware vSphere 4.1 and Workstation 8.0.3
Fedora 17 office is different under VMware vSphere 4.1 and Workstation 8.0.3
Hello
I'm sorry but I don't understand the position, but if I'm right you wonder why the office are different.
It is simply because the desktop 8.0.3 Fedora 17 can start the new interface of Gnome 3, on vSphere 4.1, it can be started and Fedora will then be restored in "compatibility mode".
HTH
Giuseppe
Tags: VMware
Similar Questions
-
can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "
Thank you
can someone give me some information about the rules of absente, homework and laboratories, in these classes online.
You must participate in daily.
You need a good Internet connection and a fixed phone or a headeset.
Online courses are generally in central time... but in some cases may be different.
also should I take a test on these classes?
NO.
just be present on these days of class?
Yes
I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?
The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.
André
-
VMware vsphere essentials more and Dell MD3000i iSCSI - virtual disk not on preferred path
Hello world
I am trying to set up our new vmware vsphere essentials plus the facility. We have 2 x Dell R710 servers running vmware esx4 and have a md3000i SAN.
Each server has a network cable to connect to a network SAN controller.
vmserver1 a vmnic6 IP 192.168.130.110 the IP controller connection 0 192.168.130.101
vmserver1 has IP 192.168.130.111 vmnic4 connection to controller 1 IP 192.168.130.102
vmserver2 a vmnic 6 IP 192.168.131.110 the IP controller connection 0 192.168.131.101
vmserver2 has IP 192.168.131.111 vmnic4 connection to controller 1 IP 192.168.131.102
Whenever I start a virtual server it causes the dell md3000i start flashes orange, and management tool says disc not on favorite virtual path.
After entering the tool configuration and affecting the path preferred, from the commencement to vmware, even with a single connected server it causes the error.
I tried to configure vmware to use direct fixed and alternate paths.
I did a quick search on Google and found these sites:
http://www.delltechcenter.com/page/VMware ESX4.0andPowerVault MD3000i
http://en.community.Dell.com/support-forums/storage/f/1216/t/19269507.aspx
Strange configuration.
Looks like you are using some cross cable?
Each host must have 2 vSwitches, each with a port vmkernel on one of the two iSCSI network.
Each host must reach all 4 of the MD3000i (test with the vmkping command) interface.
See also:
http://www.delltechcenter.com/page/VMware ESX4.0andPowerVault MD3000i
André
-
Web page looks different under Internet Explorer 9.0 and Safari 5.1.
One of my web pages appear different under Internet Explorer 9 to how it looks in Safari 5.1.
If you look at this site:
His header/banner at the top is narrower than the record of page of a few pixels. The two should be 900 pixels wide.
Can someone help me?
I don't see a difference between the rendering of Chrome, Firefox and IE9 (Zoom = 100%).
However, the banner image 900px × 158px (scaling to 904px × 159px) is located on the page, index.shtml and not reduced on other pages. What do you see?
PS. I think it would be nicer if you used your banner, GIF JPG not.
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
http://ALT-Web.com/
http://Twitter.com/ALTWEB -
The costs of Certification VMware VSphere 5.0 and Date
Hi all
I'm here to ask questions about Vmware Vphere Certification costs and the review Date. I want to get a certification. Guide me on the whole procedure.
Help in this matter will be appreciated.
Concerning
Hassan
Welcome to the community,
You can find the requirements and links to the courses required for VMware Certified Professional (VCP)
As you can see on the page, the VCP certification requires not only an examination but requires also an internship. For the cost and dates, please follow the links in the box "Courswork. necessary
André
-
Problem with the video for "VMware vSphere Hypervisor - install and configure.
Hello
In this page: https://my.vmware.com/group/vmware/evalcenter?lp=default & p = free-esxi5
When you click on the "Installation and configuration" tab, we have access to videos for vSphere Hypervisor.
But at the moment, none of the video can be shown. I tried this in my computer at home as well as my company computer and none works.
Someone who works for VMware please check this problem.
Thank you
OK, I just found what was "wrong". These videos are "optimized" for Internet Explorer! Yes, I tried on Firefox and Chrome on XP Pro and Win7, nothing worked. Then after reading your message, I thought ' what happens if I try that? " ... and indeed, the videos are displayed inside, I.e. I got suddenly a bad feeling, like I was back at the beginning of the 21st century!
Come on! Who would still do 'optimized' only website to know today? I'm sure they will not be displayed on my Tablet either.
I found these videos on YouTube:
http://www.YouTube.com/watch?v=Xss_2Qx51fU
http://www.YouTube.com/watch?v=adrO7SXyjBE
http://www.YouTube.com/watch?v=8lkMIqgfOj0
http://www.YouTube.com/watch?v=ZHUjDWpHJvU
http://www.YouTube.com/watch?v=_MofPJsG9gQ
I think they are the same videos (but the quality is really bad... 360 p.: geez!). Could someone confirm that they are indeed the same as those in vmware.com? THX
PS: Oh, on the section "Help", I found it at help | United States but I've seen no paragraph telling me how to report a problem on the website.
-
Is it possible to learn by myself and then pass the test. I really want to take the exam, but don't have four full days of training. Can I read onlind documentations, as well as working with VMware VC and ESX servers, so I have no chance to proctise. Thanks in advance!
Yes, you must take an official course of the exam!
-
VMware vSphere Essentials Plus Kit Upgrade
Hello
We are currently running VMware vCenter Server 5.1.0 and VMware ESXi VMware vSphere Essentials Plus Kit license 5.1 with 5.1.0. I think the move to VMware ESXi and VMware vCenter Server 6.0 6.0
I already had a host with ESXi 6.0 and I tried to use my existing on this host 6.0 Essentials Plus Kit License, but it does not work. I have to upgrade my license key? What are my options?
VMware vSphere license key update
You must obtain new licenses to deploy VMware vSphere 6.0. VMware vSphere 4.x and 5.x existing licenses vSphere will not work on vSphere 6.0.
Please see after the URL and you'll get more info on what you are looking for
-
What is the difference between "VMware vSphere Essentials Kit" and "VMware vSphere Standard" in terms of features?
www.VMware.com/Products/vSphere/Pricing.html
I'm looking for professional use in VMware.
Thank you
P2V is possible NFB free esxi edition, no problem. You can also manage via vsphere client where you'll have GUI and you create VMS with vsphere client that connects to the ESXi host.
But it cannot be managed by vcenter to get the functionality as HA, DRS, vMotion, models etc.
As you have mentioned that you have pretty much a box with VM sound your decision to go with free or licensed.
If you go with free version of ESXi, you can have only 32 GB vRAM right. This means that if your physical machine have more than 32 GB of RAM can also create virtual machine with no more than 32 GB of RAM.
If you decide to go for licenses of its better to choose more essential rather than vsphere standard edition.
As essential or essential more is a group package which also come with 192 GB of vRAM, with a maximum power of 3 home with 2 processor and a vcenter license. Cost is lower than vsphere standard edition.
http://www.VMware.com/products/vSphere/pricing.html
Price please point by clicking on the bottom of the tab for useful and correct answer
-
Hello everyone
I took the VMware vSphere: install, configure, and manage 09/09...will the course of the class
to apply for the exam for VCP certification? If so how much time I have left with remaining
eligible with this class to take the test?
Thanks in advance...
Your course was based on 4.0 at the time, the current VCP4 exam is not 4.1 specific as such, if your course still qualifies you for certification. VCP4 is specifically "VCP on vSphere 4", not 4.0 or 4.1.
Get the review plan later, the study of literature 4.1 (in the case where VMware is updated the review of some elements specific to 4.1) and use the convenient software either 4.0 or 4.1.
Scott.
-
-
Trying to Downoad free ESXi: Getting "VMware vSphere evaluation expired '.
Hi all
I have a little problem of license: I tried to download vSphere 4U1 (I especially need vSphere Windows 7 Client), but after the connection and try to download the free version, I get a on a web page that says 'VMware vSphere evaluation expired' and "Ready to buy?" tab.
True, I had downloaded the vSphere 4 in early August and this 60-day evaluation period has expired a long time ago. But due to the problems with vDR (itself known and many negative entry in the list) I have not yet decided on the version of vSphere, I need to buy... a lot of money at stake
So: Is there a limit on all the free data center products that a registered user can download for "free trial"? I have a few new servers available for tests and did not want to go through the installation of vSphere 4 + update to v4 U1, especially since the laptop management runs Windows 7, where - according to me - vSphere Client and update manager will not work without some pretty nasty sounding hacks.
Thanks for your answers,
Thomas
-
H730 driver from the Vmware Vsphere 6.0 site?
I have a cluster with VSAN work, but the Virtual SAN Health plugin gives a warning under virtual health SAN HCL-> controller driver, which the driver used is slightly different from what is on the HCL. I used ISO customized for VSAN/VMware on Dell website, and this is the only warning gives the plugin. I would like to specifically install the correct version in the HCL.
So, I have the found for download on the firmware version PERC H730/H730P/H830 Mini/adapter RAID controllers 25.2.1.0037 Driver Details | Reference Dell U.S., but it does not list a download for VMware, only windows and linux. I see it in the VMware HCL to http://www.vmware.com/resources/compatibility/detail.php?deviceCategory=vsanio & productid = 34853 & vcl = true, where he lists a download for Vsphere 5.5 and 6.0. How I would deploy for my 6.0 cluster? Do I need to use the Windows driver from the Dell website and deploy with OME? I prefer to get it on the VMware site. I looking in the wrong place on the vmware site?
Not sure if this is relevant, but the Dell OEM ESXi image has been mentioned. With VSANs, it is recommended to avoid the OEM images and use the image of VMware stock. Thank you, Zach.
-
ESXi 5/VMWare vSphere 5 tool Mgmt Essentials
I got the upgrade of the v5 FREE ESXi from VMWare vSphere Essentials 5 hypervisor. I'm looking for what we call the 'vCenter Management Console", which I'm supposed to have access with me purchase vSphere Essentials 5, to manage multiple servers within a single console ESXi and also have a GUI based ESXi management tool for updates to update my v5 ESXi servers.
With the naming conventions wonderfully confusing of all the different productions of VMWare, I can't find anything with that name. The closest element I can find reference only ESXi v4 and when I try to download, I gives me a warning that I am not allowed to download.
Could someone shed some light on this topic for me so I can clarify what I'm looking for? Still, it comes to a VMWare vSphere 5 Essential Kit that I just bought.
Thank you
Dave
Yes, you could use an Oracke VM or VM VMware running under VMplayer or in the essential of vSphere environment - or you can manage ESXi and the individual instances servers using the client installed on your workstation vSphere with them having to use vCenter -
VCenter integration in an AD environment is not a requirement it just makes managing easier users/groups in a large environment - you can actually have the server part of a workgroup and use groups the and users on the access - default server administrators locala groups is given administrator access to the environment of vcenetr -.
With regard to updating a ESXi host, you do not need VMware Update Manager, it can be done using the CLI - you can update with software esxcli 5.0 ESXi hosts vib commands discussed in vSphere upgrade documentation included in the documentation of vSphere set 5.0. You cannot run the command vihostupdate against a 5.0 ESXi host.
If you are looking for to deploy individual hosts with likited resources that, I would suggest deploythe free version of ESXi - weak positive points cost disadvantages: you need to manage each host individually and will be capped on memory - which I believe is 32 GB
With the essentials, it will be more expensive, but you know be able to manage several servers ESXi to a place more depending on your license, you will be able to take advantage of VMware HA allowsing your environment to recover from a failure of the host, VMware DRS, which will ensure the delivery of resources to VMS in times of conflict and can back up the virtual machine with them affecting the performance of the virtual machine or access
-
How to install Dell OMSA on a free host VMware or VMware vSphere Hypervisor comments?
We are virtualizing our 2012 R2 Windows Server and you have a Dell PowerEdge T310 server. We have installed vSphere hypervisor free version 5.5 on the physical server.
Does anyone know how to install the Dell OMSA? I heard that it will not work if it is installed on the Windows Server R2 2012 host because of the virtualization layer.
I read a few posts on how it's done, but I can't always get my head around it. I think I've also seen people install a VIB on the hypervisor vSphere itself?
Can you please describe the General steps or point me in the right direction on how to run the OMSA? The Dell PowerEdge server has a RAID, and we must use OMSA to see a RAID controller unexpected sense errors if they are generated. We used to have a problem with consistency RAID and have had to start again before.
He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.
Hello
There are a lot of articles and posts on how to install OMSA under VMware. If you encounter problems then please post an explanation of what you are having problems with. Here's a post I did on the subject. It has a link to a youtube video that includes step by step instructions:
http://community.Spiceworks.com/topic/403141-Dell-open-mange-in-VMware
jeff0000He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.Integration of OpenManage for VCenter requires always the OMSA agent must be installed on the hypervisor. Correct, it is not a free version of VCenter. No installation procedure who advises using VUM or VCenter should be ignored because you will not have access to these utilities.
Thank you
-
replication with different versions of vSphere vSphere
After reviewing the matrix of interoperability of products, everything "looks" good, but caring for a second opinion. See below:
Environment:
- vCenter 6 sites
- PSC external sites
- Protected site is vSphere 5.5 Update 2 or 3
- Recovery site is vSphere 6.0 U2
- vSphere 6.1 replication
- 6.1 SRM
Issues related to the:
Can anyone confirm the support in regards to the different version of vSphere protected and recovery site?
Are there related shades to have different versions of vSphere protected and recovery site?
We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem?
Different versions of vSphere are supported to recover protected site and as you have configured, it is recommended to have the new version on the recovering site. The reason for this and be careful about the different versions, has to do with the versions of virtual equipment. VMware ESX can run VMs with earlier versions of virtual hardware, but not later (came out after the version of vSphere). You want to make sure that your virtual machines will run on the host on the recovering site. If you are using a later version of vSphere to recovery, as long as you deploy new virtual machines when running it, or if you do this, you use a virtual hardware version that is compatible with the hosts what was your site protected, you will never come across the problem of trying to recover a virtual machine with the hardware version that is incompatible with vSphere.
Issues related to the:
Can anyone confirm the support in regards to the different version of vSphere protected and recovery site? -Yes
Are there related shades to have different versions of vSphere protected and recovery site? -See above
We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem? -Yes (see above)
Does make sense?
Maybe you are looking for
-
Why can't I change my fonts in safari 10.0 sizes?
-
Skype disappears after the computer restarts
Hi all Since 3 days ago Skype disappears from my computer when I turned off my computer or when I turn it back on again. In any case, after every reboot I reinstall Skype, which works as normal until I shut the computer off again. I use Windows 8. I'
-
Satellite X 200: WLan driver does not work with Windows XP Home edition
Hello I'm trying to get WIFI on my Satellite X 200 XP. I downloaded the drivers of these 'wlan-intel-1244-7147"but still no luck, also after installing these drivers, I get an error when I stopped saying" sample program does not. This is a new instal
-
Hello. I lowered my win8 to win 7 and a few drivers, that I can't find. Can someone help me please? 1 Bluetot PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103CPCI\VEN_1814 & DEV_3298 & CC_0D1100PCI\VEN_1814 &
-
Readings of Multisim Simulation
Heelo everyone, I am new to electronics and I would be grateful If someone please help me understand what to expect on the readings of anylyzer Attaché please. Also I'm not sure if the connection of the circuit is good. I appreciate your help. Thanks