FF29.0 crashes when loading loading with tab groups, very well without tab groups. WHY?

Similar Questions

• Satellite L675-11R - crashes when loading the BIOS

  Hello

  My daughter L675 crashes when loading the BIOS.

  Yesterday the system firstly could not start with a "Boot failed" error, as the HARD drive is not found.

  I restarted and is gone in BIOS - the HARD disk was recorded and shown as a first Source of seed. After reboot, the system has failed again with the same error.

  After several attempts, even if it does not. now that appears in a black screen, blinking cursor top left. Hot start works, but another key not seem to provoke a reaction. I can't start the BIOS Setup.

  I removed the HARD drive and connected it to my PC. It was recoginized and I am able to write to it. A W7 disk verification completed successfully and some problems have been "fixed". But when I reinstall the drive of the laptop, it still does not start.

  I double checked that the drive & Modules of memory are well inserted.

  Any ideas I can try?

  Thank you

  John

  Well, the cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
  I think you need to format the HARD drive using other computers. Delete all partitions and insert the HARD drive into the L675 again.
  Then try to install the Windows system on this device.

  In addition, you can try to check this HARD disk using a 3rd party software.
  Drive Fitness Test is a free tool that can help you test the ability of the HARD drive.
  If some errors would be detected, then a replacement HARD drive would be desirable.

• WSN-3212 or NI WSN 3202 when loaded with VI target with

  WSN-3212 or NI WSN 3202 when loaded with a new firmware using option "Add LABView WSN target", cannot re connect with the gateway ethernet OR WSN - 9791. In MAX, the quality of the link state is "lost Signal".

  Basically, I tried to change the sampling in the sample interval ""case structure, then built the VI and deployed on two WSN nodes. " They show the status of the download of the firmware and the LABView also shows the message 'successfully deployed", but then, knots just to start scanning and never connect again.

  Please help in this regard.

  Hello binarystar105,

  When you have downloaded the new firmware, did you follow the steps described in this article?

  How to upgrade the Firmware on my NI WSN gateway?

  http://digital.NI.com/public.nsf/allkb/CF6241F5F849FC7086257909008327C5?OpenDocument

  Also, what version of firmware you currently have?

  What version of the LabVIEW WSN Module work?

  If you look at the properties of the node of your window from the LabVIEW Project Explorer, can set you the tab node sampling interval?

  You may already familiar with this material, but I found the following white paper to be extremely useful when I started working with WSN:

  Getting started with wireless sensor networks of NOR

  http://www.NI.com/white-paper/8890/en/

• "Scratch disk" was almost full attention. I deleted the files opened to create space. However, photoshop CC, crashed before that I was able to free up space. I tried several times to re - open Photoshop CC but within 2 seconds it crashes when loading. I t

  "Disk zero" was almost full warning. I deleted the files opened to create space. However, photoshop CC, crashed before that I was able to free up space. I tried several times to re - open Photoshop CC but within 2 seconds it crashes when loading. I then decided to upgrade to the 2014 version, update. He worked twice and now repeat the same problem, I have lived before update. This only happens when I'am connected under "other user account" as I had been when the accident happened first and not as an administrator. I purged the cache, more space for performance, etc. in Admin mode, I ran permission repair in public services, but when I change the user account, photoshop crashes with seconds loading. Please notify 2.8 GHz Intel Core i7, 8 GB 1600 MHz DDR3

  As you can already read in your crash report - the crash has little to do with Photoshop and everything to do with your Nik/Google SelectiveTool plugin.

  Disable this plugin and contact Nik/Google for an update that fixes bugs in this plugin.

• Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.

  Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.
  I've recently completely removed, disabled and reinstalled all my Master Collection Adobe Creative Suite CS3 to fix some problems with another application in the suite, and now I'm surprised bridge continues to fail. In my mobile workstation, the same software (bridge) uses to run.

  I tried to run Bridge under several compatibility modes. All have failed.

  Is there any bug to know, that I should be aware of? Any difficulty?

  Is this a common problem?

  Have you tried to reset the preferences?  Hold down the CTRL key and launch Bridge.  You will get a window to reset.

  By accident, it means that the computer has to be reset?  It freezes?  Error messages?

  Not enough information in other words.

• Satellite L500-19 x crashes when loading dvd software

  Satellite L500-19 x crashes when loading dvd software. It's photoshop elements 9. Other software by load generally okay, but not always.

  Any ideas?

  Hi shownomercer,

  Have you tried the Photoshop disc in another computer to check if the installation disc is ok or not?

  What exactly happens when the computer crashes? Blue screen?

• I get the error as adobe Illustrator crashes when loading multiple pages PDF. Please help me. Thanks in advance.

  Hello

  I get the error as adobe Illustrator crashes when loading multiple pages PDF.

  Please help me. Thanks in advance.

  

  Illustrator is limited to 100 work plans. Up to 120 pages will never work.

• All the applications in the creative cloud crashes at random times. Always worked very well, now he doesn't. [was: crashing]

  All the applications in the creative cloud crashes at random times. Always worked very well, now he doesn't. It crashed just before I updated, and after that I just updated. Photoshop, illustrator, After Effects, first everything crashing. Adobe pretty edgy.

  Please contact our staff of support directly by following this link: contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?

• Firefox crashes when loading websites with videos or watch videos

  I've only known short Firefox slow or crashes when I visit websites with embedded videos. The problem mainly occurs when I try to watch the video, but even just to load the web page. Any video site linked to, that's the problem with Youtube, Vimeo and others. What could be wrong?

  Hi again! It seems that the problem resolved itself... Probably by the new update of Firefox or any update of the oher plugin I made last week. I can watch Youtube videos without problems.

  So, for now... I guess we can call this resolved. But I don't know for sure what caused the problem and what has been resolved.

  Please post answers and be willing to help me.

  Above and outside.

• Before 4 opens and then crashes when loading project

  I realize that first Elements 4 is old, but I still love and use it for all my projects. Here's my problem: I've been running for 4 months on my new laptop for Win 7 HP 64 - bit, but only today it started to go bonkers. It opens fine, but when I open a project, it minimizes the window pre as soon as it loads. Even if I tried to re-opening the window, he refuses to return to full screen mode.

  I tried the Vista compatibility and even XP, which runs under administrator privileges, but nothing helped. It is the result of a virus or a newly installed program? I return to the edition...

  Thanks for the info.

  There is one thing I need to clarify-do you mean that you can no longer open a new project, one that is empty? If Yes, then you can skip the test below, well we could get back to that, if we can get before you open a new project.

  When you say "raw AVI files", these are DV - AVI, a special form of AVI? This ARTICLE will give you more information about the file formats.

  You mention Audio WMA files. As an AVI file, those can contain a lot of different things, but more on that in a moment.

  With Win7-64, 4 GB of RAM is all that Win7 should work, and leaving not a lot of excess for the programs.

  Now, the projects may become corrupt or unstable, because of many things. Active in a project can become a problem. Test a project for the 'bad' assets is to ensure that the pre is closed and then 'hide' the assets of pre. As the project file, of PREL, contains none of the assets, but only following absolute paths for these assets, it's farily simple. How they structured their active records can greatly simplify this task, or cause a bit of work. It sounds as if your project is pretty simple so far and should not be difficult to follow these steps to test:

  • With the pre is closed, go to or records, where the assets are located and move the folders elsewhere. Don't forget, the PREL uses absolute paths, so that this original path no longer apply. At this point, I also would separate active by type, say with video files in a folder 'Video', still Images in a folder "Images" and the Audio files in a folder "Audio". You'll see why in a moment.
  • Before starting, and then open the project problem.
  • We will be faced with a message dialog box, asking "where is file _? Since we moved these assets, we must help the PrE to find them. Simply navigate to the proposed folder, where the first asset. The display of the dialog box offers a Finder, but since you have moved things, you should have this info. Locate the first file, claiming before.
  • Once you find it, pre will do two things: make the connection again and then look in the folder for other assets, used in this project and also a link to them - pretty neat, huh?
  • Given that we have separated our assets by type, if the first type, say video, very well, that we can exclude those charges. If the project crashes here, we found at least one problem.
  • When meadow comes to the following assets, reappears on the screen of the dialog box, and we will do the same thing: find the file, claiming before, and again, pre will restore the link with it and this search for the active folder. If all goes well, we can probably exclude those assets as a problem.
  • He repeats until either the project managers, or until project accidents, or crashes. If this happens, we reduced things down to a single type of assets. That's why we separated - it's active troubleshooting much easier. Note: Titles are written in XML, in the PREL code, so nothing concrete there for them at this stage.

  Whatever you do, don't choose NOT save, and especially if you decide to Skip Media, or cancel. Only do a Save_As, so to NOT overwrite your original PREL. Never overwrite original PREL, if you are having problems.

  Please report it on this test. The project fails with a specific type? If Yes, what is this type of assets?

  If you have a certain asset of this type, you can redo the test, moving, say half of these goods again and rerun the test. If the project crashes with either the first half or the second, you are closer.

  Good luck

  Hunt

• SurCode ac3 encoder crashes when loading first Pro CC 2015

  This also happens with media encoder.

  First Pro CC 2015 and media endcoder crash on loading the program, which makes them unusable both...

  Remove this file might help, but I don't know which is nessesery

  file:///applications/Adobe%20Premiere%20PRO%20CC%202015/Adobe%20Premiere%20PRO%20CC%202015.app/Contents/plug-ins/SurCodeAC3Encode.bundle/

• Hearing crashes when loading the automatic click Remover

  I just encountered a problem where Adobe Audition CC 2014 (fully updated) will crash when you try to open the plugin "automatic click Remover. One interesting thing to note is that if I have no Favorites saved using the automatic click Remover, it will terminate the process that the plugin is running without problems. It's only when you try to enter the plugin to adjust settings that it will immediately crash the program before it can load it manually. I use my favorites not bad, so I don't know if this problem came due to a recent update, or if it was hidden a long time ago, but I never found it until now.

  I'll probably try to reinstall the hearing soon but thought I should post about it here first. Any help would be appreciated.

  Well a few plugins more has started to plant too, so I re-installed and everything seems to work now.

• Java games crashing when loading on Satellite Pro C660D

  So I have the Toshiba Satellite Pro C660D for Christmas. The first thing I did as a teenager was to examine the specifications to see if she would be able to reasonably run the games.

  Care was fine for me. So I installed a few games, Minecraft installed first, which crashed. I then install Farming Simulator to see if it was just Minecraft, farming Simulator crashed.

  I tried to install the latest drivers from the Web site intel however, Setup seems just close when the installation is about to begin.

  I am really very disappointed because my old Dell inspiron 1525 which has been literally if collapse will run these games very well.

  If anyone can help it would be much appreciated.

  Thanks in advance,
  Connor

  Chalky Hello,

  You're not alone, my son has saved his Christmas money to buy a Satellite C660-21Z. I checked on the minecraft site by putting in the specifications of the machine and it should work just fine. When we try, it crashes when connecting.

  This seems to just be a Toshiba _problem games_ java running, and there is already stuff of minecraft in this regard support forum. I started in Bartpe XP and got, it works using _it is not a hardware problem, _ but the satellite comes with win7 and I don't want to go down.

  I tried to put java day and according to the minecraft forum, the problem is that the Satellite comes with the ATI driver that needs to be removed. That would be wise because it works with a Bartpe bootable disk, but not with the Toshiba software package. I'm afraid to support Toshiba seem very reluctant to help, because you have probably already found. >>

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63212

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63124

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64845&TSTART=0

  As minecraft works ok off a bartpe cd, I would say that there must be a problem of Toshiba running and it works ok on other laptops, and also other Java games seems to fail on the C660, I guess that there is a conflict of drivers with java. I'm sorry, but nobody else seems to be able to get a c660 longer works.

  I bought mine from Amazon that I noticed that many of those "renovated", may be returned and exchanged because they do not have Java?
  I'm giving my son until January and then request a refund if we cannot make it work.

  Sorry I can't help more and please let me know if you get a solution because otherwise it seems a nice laptop.

• Yoga compressed 2 (1050F) - Crash when loading

  Hello everyone! How are you?
  After some research on the Internet and in this forum, I think I have more solutions. So here's the deal:

  My girlfriend and I bought a tablet of Yoga 2 (model 1050F) end of August. Since his last OTA update a very annoying bug started: when charge us and the Tablet goes into mode 'sleep' (after 10 minutes), we can hear this locking and unlocking by itself. If we go to the screen, the home screen keeps starting and crashing until we have unplug the AC tablet. Sometimes, it displays a popup saying: "LenovoUI Application has stopped working" and then the problem turns on again. We tried the following:

  • Turn the Tablet - failed
  • Factory reset - failed
  • Logcat spilled on computer via ADB - can join if necessary
  • Hard reset via recovery mode - failed
  • Lenovo repair service - they changed the motherboard, a bit of a problem fixed (they tested, there is no test long enough), but came at the time when Lollipop OTA jumped in.
  • New launcher (Nova launcher) - has no
  • Factory reset (again) - has no

  Our tablet is not - rooted I don't mess with her as needed, it's tablet (and warranty), not mine (... a little). Yes 100% stock.

  So I would like to know... someone else has the same problem? Is aware of Lenovo and will send a correction? Should I send it to be repaired? Or is there a solution I can try myself? We are a little disappointed to have spent $ 300 on a device that does not work correctly after 3 months...

  Thank you and Merry Christmas to you all

  Hi, it's me

  Reported to work without problems, if the locale set to English (United States)

  Reported to work without problems, if the locale to French (France)

  Reported a total failure if the locale to French (Canada)

  Looks like the problem is Lolliflop which isn't much in Canadian French... I don't think about this before my 5 Nexus (and any other Android device, I have here) not had this kind of problem, when I updated their just now. Well well...

  Guess I'll have to give technical support a call (or e-mail) telling them that the matter is resolved.

  going to eat a baguette...

• App crash when loading very large images in Spark Image component

  Hello world

  A client of ours should display very large jpgs (about 8000 x 5000 px), which are the object of a scroll and zoom using touch gestures.

  To my surprise, even, the performance to do this using a scroller is pretty cool

  BUT unfortunately the application sometimes freezes when loading the image. (about 15% of chance to do)

  Debugger does give no info at all, simply closes debugging.

  Does anyone have an idea what could be causing this or how to avoid this?

  PS tested on several machines and different Versions of Tablet, including 2.1.0.1032

  Thx a lot.

  Tim.

  Sorry it took me a long time to respond, but I had other issues to be addressed in the first place

  Use the Profiler showed a leak memory in the skin of the viewer of the image.

  It is a memory problem.

  I must put BimapImage null source value before destroying the display manually, even if I had no other reference to it.

  A little strange, but this solved my problem.

  He could reappear obviously using a single image much bigger, but I guess that it must accept some limits on a mobile device somehow.