WSN-3212 or NI WSN 3202 when loaded with VI target with

WSN-3212 or NI WSN 3202 when loaded with a new firmware using option "Add LABView WSN target", cannot re connect with the gateway ethernet OR WSN - 9791. In MAX, the quality of the link state is "lost Signal".

Basically, I tried to change the sampling in the sample interval ""case structure, then built the VI and deployed on two WSN nodes. " They show the status of the download of the firmware and the LABView also shows the message 'successfully deployed", but then, knots just to start scanning and never connect again.

Please help in this regard.


Hello binarystar105,

When you have downloaded the new firmware, did you follow the steps described in this article?

How to upgrade the Firmware on my NI WSN gateway?

Also, what version of firmware you currently have?

What version of the LabVIEW WSN Module work?

If you look at the properties of the node of your window from the LabVIEW Project Explorer, can set you the tab node sampling interval?

You may already familiar with this material, but I found the following white paper to be extremely useful when I started working with WSN:

Getting started with wireless sensor networks of NOR

Tags: NI Products

Similar Questions

  • Encapsulate data problems when loading with sql loader

    Hi all

    I use sql loader to load data into a flat file HP UNIX.

    I find the fi the NUMBER data type or date type get wraped to the new line, the control file triggered errors.

    The data looks like to (field dilimiter is |, record dilimter is ~):

    1 A87CCH | 1 A87CCH | PLAN_ACCOUNT_PROMOTION | HIR6A-1 | 20100706 06:06:24 | 1 DNE1 | DC?
    2010.7 FY1011 Promoiton | 1 A87AW0 | 1 HJEZE | Private | 20100730 00:00:00 | 00 20100710
    : 00:00 | 0 | Completed | 20100730 00:00:00 | 20100710 00:00:00 | 0 | 1 4A6PKP | TFMAAI | N
    | 0 | 0 | 0 | 0 | 0 | 0 | 1 4A6PKP | Approved | 1 8U4E-163 | 00:00:20110630 00 |
    20100708 01:45:35 | 20100707 00:00:00 | -1||| 0 | 9000 | 0 | 0 ||| 100. N | 0 | 0 | 0 | 0
    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | N | 20110426 04:01:34 | 1 8U4E-163 | 0|||||||||
    ||||| ~

    The control file looks like:

    OPTIONS (ERRORS = 1000, DIRECT = TRUE, PARALLEL = TRUE, DATE_CACHE = 5000, discardmax = 50)
    load data
    INFILE ' / home/bs7822/leon/leon.dat' "str" ~ "»
    BADFILE ' / home/bs7822/leon/leon.bad'
    DISCARDFILE ' / home/bs7822/leon/leon.discard'
    X_INTERFACED_DT EXPRESSION "to_date (replace (replace (: X_INTERFACED_DT_BF, chr (10),"), Chr (13), "), 'YYYYMMDD hh24:mi:ss')", "
    X_INTERFACED_DT_BF boundfiller,

    I think that replace it can treat the wrapped date. But I want to know if we can find a faster or easier way to conquer this topic since the beginning.

    Best regards


    user12064076 wrote:
    Thank you for your response. But how to ensure that a record is in a single line? For example, to unload data with coil?

    The table has more than 100 columns.

    Best regards

    UH... which guarantee is implemented by anyone or anything that generates the data in the first place.
    for example if I am extracting data to CSV for a customer or another application, making sure that it is 1 card per line with delimiters known etc.

    What is your own code that produces the data in the first place? If so, how are you to produce? With large amounts of data I wouldn't do it with SQL * Plus spool command, but I do with UTL_FILE within PL/SQL, or generating data in a file CLOB and spell the CLOB in a go using one of the CLOB methods available writing files.

  • WSN-3202 sensor supply voltage

    I want to know the amount of voltage that provides power to the sensor of WSN-3202. In the datasheet, it is written that it provides 12.6V. But if I operate the WSN-3202 battery, then to the maximum node, it can get 6 v battery of four. then, how it may be able to give where driven by battery 6V 12V sensor? Help, please.

    I have another question, with regard to my knowledge, the node not send data continuously, when gateway will call it, send it and so it will save battery by making it on after call from bridge - this idea is good? If it so, then when the node is in mode 'sleep' (do not send all data, connection) will give no voltage sensor - it should be? is it? then when the gateway do call, connection, gives power to the sensor. but he will do a delay to give power to the sensor and collect sensor data right? will this affect?

    Hello, KJV,.

    Must have lost this reply in my email. My apologies that I answer all the time!

    The sampling interval is when the wake of nodes of samples, the front-end (IA and DIO) and transmits that data back to the gateway. This is done on the sampling interval, so if your sampling interval is 5 seconds is how many times it happens. The node is in standby the rest of the time. Sampling and sought takes ms.

    The time setting power sensor is for you to specify if you want to than the power to allow line. If, for example, if your setting is 250ms for sensor supply and our sampling interval is 5 seconds:

    1 start time = 0

    2. the sensor works in 4.75 seconds

    3 example of front end and transmit data to 5 seconds

    4 node falls asleep to ~5.1 seconds

    Let me know if this clears things up for you.

    Again sorry for the late reply.


    Support Engineer produces WSN R & D

  • How to make connections on the outputs of the letter of wsn 3202?

    GOOG morning engineers,

    How to make connections on the outputs of the letter of wsn 3202?

    Sorry, I'm very confused by your response.

    You must not something on the power set by program, just connect a power supply to DIO power and mass of DIO.  Then your DIO lines should be able to output values.

    In addition, I think that you may need to configure the output line.  This would be by the project.  I don't remember what it is, but it should be in some menu properties (probably for the specific line of DIO).

  • Write the name of shared variable wsn-3202 the string of the action file name

    I use the output of several nodes Variable shared, assigned to an analog WSN-3202, as input in writing to measurement file Express VI. They are merged before entering write it as file Express VI using merge signals. I write data to a file text (VLM). In the output text file the columns containing data from the analog channels WSN-3202 are titled "Untitled", "Untitled 1", "Untitled 2" and so on. " I want that these titles to be based on the WSN-3202 node name and the channel they represent. How this is done? I've attached the output text file.


    There is a VI called to set Dynamic Data attributes where you set your signal name.

    I hope this helps!

  • ("Not Responding") freezing when loading some Web pages

    When loading certain pages Web firefox crashes for a while with "(ne répond pas) ' at the top next to the page, also bringing Windows 7 Aero affect the top of the window instead of being hidden." Perhaps this lasts ten seconds give or take most of the time. Currently, the only websites I can remember this are newegg.comand I tried to disable hardware acceleration, this does not solve the problem. A similar problem if I recall still exists for drivers of some(not me) listed as a possible problem, so I'm running drivers Nvidia 344,48 WHQL, updates only after having this problem, and my GPU is a Nvidia GTX 770.

    Figured out, it seems to be caused by the add-on greenhouse. Disabled and have no problem.

  • two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

    two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

    When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

    OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

    Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

    Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

    Please post back with your results, thank you!

  • When loading a new site using Firefox, why do I get a message telling me that "firefox prevented this page automatically lead to another page." Allow? »

    When loading a page using Firefox, at the top of the page, I get a message saying "Firefox prevented this page from automatically redirecting to another page - allow? This happens almost every time I start a new page, and Firefox will not allow to continue the download. I tell him to allow every time, even on the pages I have "authorized" by the past.

    Clear the Cache and Cookies

    Clear the Cache of the network

    -> click on the Firefox button, then click on Options -> advanced-> general-> remove the check mark from the warn me when Web sites try to redirect or reload the page

    -> Click OK-> restart Firefox Options window

    Check and tell if its working.

  • Satellite Pro A40 - sound skips when loading programs

    PC: Toshibe Satellite Pro A40
    Sound card drivers: Soundmax integrated digital audio


    When I bought my Toshiba Satellite Pro A40 my audio is not affected by loading programs and any other activities that could slow down my computer.

    I had to resinstall windows a few months back when my HD crashed.

    I reloaded all my drivers etc. and installed itunes.

    When I play music or any audio I listen to jump seriously when loading programs or when processes are performed on my computer.

    This used to be the case, I tried to change my settings from quicktime to run in safe mode, I even now deleted quicktime and itunes that I thought it was the source of the problems.

    Nothing worked, my sound is still seriously affected when my processor is busy

    I uninstalled, reinstalled my sound card drivers, but nothing has worked...

    I would really appreciate it if you have all the settings I could change to stop this problem.

    My voice through my microphone breaks a lot, so the people at the other end of a VOIP call can barely hear me... it's driving me crazy!

  • Satellite L675-11R - crashes when loading the BIOS


    My daughter L675 crashes when loading the BIOS.

    Yesterday the system firstly could not start with a "Boot failed" error, as the HARD drive is not found.

    I restarted and is gone in BIOS - the HARD disk was recorded and shown as a first Source of seed. After reboot, the system has failed again with the same error.

    After several attempts, even if it does not. now that appears in a black screen, blinking cursor top left. Hot start works, but another key not seem to provoke a reaction. I can't start the BIOS Setup.

    I removed the HARD drive and connected it to my PC. It was recoginized and I am able to write to it. A W7 disk verification completed successfully and some problems have been "fixed". But when I reinstall the drive of the laptop, it still does not start.

    I double checked that the drive & Modules of memory are well inserted.

    Any ideas I can try?

    Thank you


    Well, the cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
    I think you need to format the HARD drive using other computers. Delete all partitions and insert the HARD drive into the L675 again.
    Then try to install the Windows system on this device.

    In addition, you can try to check this HARD disk using a 3rd party software.
    Drive Fitness Test is a free tool that can help you test the ability of the HARD drive.
    If some errors would be detected, then a replacement HARD drive would be desirable.

  • Satellite L500-19 x crashes when loading dvd software

    Satellite L500-19 x crashes when loading dvd software. It's photoshop elements 9. Other software by load generally okay, but not always.

    Any ideas?

    Hi shownomercer,

    Have you tried the Photoshop disc in another computer to check if the installation disc is ok or not?

    What exactly happens when the computer crashes? Blue screen?

  • If it is good I turn off my IPhone6s when loading?

    If it is good I turn off my IPhone6s when loading? And it's good to load when 10%?

    Q1: he is indifferent to alll you use the iPhone or not care of everything.

    Q2: for a modern battery like the iPhone, it is best to start charging when more than 20%; never let iPhone die because of an empty battery, which is bad for battery life.

  • Have a program in which a sub front vi appears when loading the vi main

    I have a strange problem.

    • This problem takes place only after construction of an application using LV 8.6 Application Builder Professional version, and I installed it on the target computer. It occurs when you run the development system.
    • When I load the program on the target computer, one of the panels before Subvi used in the application appears at the top of the façade of the vi main.
    • The Subvi should never appear on the front panel at any time during the exicution program.
    • It happens to be writing that belongs to the standard library of vi.
      • I checked all calls to this sub - VI to check that there not be changed to make it load or appear when loading of the vi main.
      • It is called 4 different times during the exicution program but in no case is it set to display the front panel.

    Someone has seen this and if so what was the solution?

    Problem solved.  I copied the writing to from another computer.  Then, I went into the program and replaced vi in each place they called him.  The program now works as expected.

  • I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

    Original title: someone help please?

    Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

    So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?


    1. have you made changes on the computer before this problem?
    2 - what you want to say that you receive this error message during the installation of Windows XP?

    Check to see if the following is useful.

    Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

    Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

  • C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

    C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
    .  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA):
    SUPERAntiSpyware: (SAS):
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

Maybe you are looking for

  • data recovery

    possible to recover data from iphone ios 7.1.2 after erase all content and settings?

  • Upgrade from XP to Vista

  • Attempt unlawful to sell a microsoft office program?

    A local businesswoman installed Microsoft Office in my computer personal belongings without my consent. She was helping a student part time employed at that time create a billing system.  Since then, his company has filed for bankruptcy. This person

  • startup message box

    When I start my computer the following message "GfxUI has stopped working" can someone help me please

  • ESXi does not connect to vCenter

    Hi guys need help from anyone.I have restored my server ESXI ESXI on HP G8 5.5U3and now I can not add it to my vCenterI have a verified network connectivity all the firewall settings are OK nothing that should block add the server to vCenterI can con