field of inaccurate/gray overview added to the panels on mac

Similar Questions

• Why Airport Extreme disappeared from Airport utility, after adding to the mac feature?

  10.11 OS, with the version of the airport, 6.3.6.  I can see is no longer my Airport Extreme Airport utility after I activated to Mac. I have Airport Extreme base ME91899/A and two Airport Express units model A1392 bolt torque.  I set up the Airport Extreme unit and the network first.  I was able to see the Airport utility. I then added each airport express unit. They were also visible. Then I added back the ability of Mac to the Airport extreme unit, and now it is no longer visible in the Airport utility.  Why is this?

  Apple has problems much time with iCloud. Turn off Back to My Mac across your airport routers and then shut down and restart the entire network.

  We will have to wait for a fix from Apple.

• Help: Adding to the IPsec Tunnel encryption field Questions

  Good evening everyone,

  I'm looking for help and/or advise in what concerns adding more networking in the field of encryption of an existing IPsec site-to-site tunnel.  Both sides of the tunnel are of ASA.  The client on the remote end is eager to access the networks more on my end.  They have already updated their ACL crypto map to include the new networks.  When they perform "show crypto IPsec his counterpart x.x.x.x" it shows already encap packets attempting to join my network.

  On my side, I updated my ACL crypto map to reference the new 2 networks, created the double NAT and added the ACL needed to allow the inbound access through ports they want.  When I perform a 'see the crypto IPsec his counterpart x.x.x.x' output is NOT up-to-date with the new networks added to the field of encryption.  When I run a tracer of package of supply of one of the servers in the new network, the traffic is translated as he should, but a fall when it hits the outgoing interface for the VPN tunnel.

  Am I missing something here? Can I bounce the tunnel so that the new networks must be recognized in the surveillance society?

  Thanks in advance.

  Hello

  You must bounce the tunnel when you change the interesting traffic, otherwise the new SA will not be created, is a little funny that you say that SA is already build on the remote side, SA cannot be established only on one side, is like building a new tunnel, if you don't have it on one side, it can not simply prevail and create the entry of SA. In addition, adding new networks and bounce the tunnel you need to generate traffic to trigger the ITS new or you will never see that it created. Check your no nats and routing and it should work.

  Best regards, please rate.

• How can I display the last field added to the Manager (bottom) and keep the scrolling feature?

  Issues around scrolling on managers of blackberry is a real headache.

  I would like to be able to add fields to the bottom of a Manager and have this field displayed on the merits without taking the focus to another control.

  I'm looking for something similar to how works the yahoo chat window, for example.

  I was not able to get the last label field added to the box to display.

  Here is the code relavent I have:

  
   //adds a labelfield and a nullfield to the display    public void update()  {     UiApplication.getUiApplication().invokeLater( new Runnable()        {            public void run()            {             try               {                 scrollingWindow.add(new LabelField("Hello1" + count) );                   //add nullfield to facilitate scrolling                   NullField nullField = new NullField( NullField.FOCUSABLE );                   scrollingWindow.add(nullField);                   count++;              }             catch( Exception ex )             {                 Dialog.alert( ex.getMessage() );              }            }        }); }
  

  Any ideas?

  Couple of quick things:

  (1) you can make your LabelField focusable and save adding the NullFields

  New LabelField ("Hello1" + count, Field.FOCUSABLE)

  (2) have you tried to discover what field has focus, then set the focus on your new field, and then reset back to that he originated from?

• How are added to the field "code"...

  I'm lost here, I use LiveCycle Designer ES and I'm trying to fix a few fields to interact with each other in pdf format. I studied a few examples, calculation field scored in the tab value "Calculated - Read Only" and the code is added to the Script (Ctrl + Shift + F5) editor

  What I'm trying to do is to add two numbers inserted by the user and the display score in the third field. I created 3 'digital fields' named:

  NumericField1

  NumericField2

  NumericField3

  last value "calculated - Read Only.

  I mark the last field and go to the script editor (ctrl + shift + f5 or window-> script editor)

  Here I set the language for Java Script (which is enabled btw) and I put is seen in some AA9pro examples (like the holidays)

  Sum (NumericField1, NumericField2);

  or seen in tutorial adobe javascript

  var f = this.getField ("NumericField1");

  var g = this.getField ("NumericField2");

  Event.Value = f.value + g.value;  or NumericField3 instead of event.value

  any of these shopping errors in the syntax checker and nothing that works. Do I did wrong?

  Please advice.

  Hello

  Let Val1, val2, Val3 are three digital fields.

  then the script Editor,

  In Javascript,.

  val3. RawValue = val1.rawValue + val2.rawValuwe;

  That's all. Try good luck.

• XML to fill some movieclips added to the scene with AS3

  OK, I am new to AS3 and it's the biggest thing that I tried to do.

  I'm just at a loss for the right path to take to achieve what I want to do.

  In short, here is what the final result will look like:

  The scene contains a large (about X size) movieclip with a scroll bar (not important for this discussion). This movieclip is created using AS3.

  The large movieclip is filled with many small movieclips created from a template in the library. This model contains certain dynamic text fields (let's call them text1_MC and text2_MC). Dynamic text for each small movieclip is provided of an XML file that contains the text and text1 2 data.

  I was watching tutorials to dynamically add a text as well as the instructions of plotting xml data analysis and others. What I can't find is how add dynamically the text to a text field in a movieclip and then add the movieclip on the stage and then start everything for the next bit of data.

  What we call this process? I know that I am using a loop statement, but someone could give me an overview of all the different things I do to get my data on xml, fill a single movieclip, and then adding this movieclip to the greatest MC, then doing that everywhere for all xml entries I've got, then adding that great MC on the stage?  I would be happy to get it all myself.

  Thank you!

  Hello

  You have created a single object. Only, I changed your code. pls watch it.

  var Timeline_mc:MovieClip = new Timeline_MC();

  var flag: Flag_MC.

  function ParseFlags(flagInput:XML):void
  {
  var locationList:XMLList = flagInput.Flag.Location;
  var titleList:XMLList = flagInput.Flag.Title;
  var actionList:XMLList = flagInput.Flag.Action;
  for (var i: int = 0; i< locationlist.length();="">
  {

  flag = new Flag_MC();

  var locationElement: Number = locationList [i];
  var titleElement:XML = titleList [i];
  var actionElement: XML = actionList [i];
  Flag.txt_title. Text = (titleElement);
  Flag.txt_intro. Text = (actionElement;)
  Flag.x = (location element);

  Timeline_mc. AddChild (flag); / /[i] ;

  }
  }

  addChild (Timeline_mc);

  Thank you

  Concerning

  Bala.S

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• To remove photos from my best results images being added to the folder.

  I wanted to remove several photos in a folder in my pictures.  I have stressed the photos I want to remove and click the Remove option.  The photos have been removed, but a copy of the photos have been added to the folder.  Other attempts to delete copies resulted in deployed additional copies.  I couldn't find a solution.  Help.

  Maybe the info will shed light...
  failure to completely release the mouse button
  When moving from one room to another is
  the cause of unwanted copies.

  Here's how to reproduce the unwanted reproduction...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  Ooops! More copies...

  Maybe the following will help:

  Sometimes most of the person who
  trying to select multiple by holding the CTRL
  or the SHIFT key down while clicking on the left to select the
  image files.

  Copies are created when you are unable to
  completely release the mouse button before
  you move the pointer to another file. When a group
  the selected file is dragged... even the slightest
  release the mouse button will produce a bit...
  copies of all the files previously highlighted.

  It's a little easier if you have your folder
  Options set at single click... that way you can
  select/deselect a file with just a mouse more
  and you don't have to click. For multiples you
  I have to keep... CTRL or Shift.

  Do not click on... no slip... no copy... maybe that of
  your solution. To adjust the click...
  Open a folder and go... Tools / folder
  Options / General tab... Check... 'single click '.
  To open an item"/ apply / OK.

  If you want to delete all the files in a folder
  You can try the following:

  Reach... Edition / select all... or type... CTRL / has...

  With all of the files selected... go... Drop / delete...
  or press your delete key... or... click on the
  Group and choose 'delete '.

  How do I find and remove unwanted 'copies '.
  of your image files.

  Open the folder that the images are saved in and
  on the left, click on the button 'Search' in your toolbar.

  (If you view the files from a montage
  program and do not know where the record is... right
  Click on one of the image files and the menu...
  choose... Properties. The path to the folder will be
  in the tab 'General' to 'Place').

  In the research pane select... "All files and folders".

  In the "All or part of the file name" field. Come in...

  a copy of

  Now... on the left, click on the search"" button.

  When the search is complete... go to... Edition / select all...

  Then go to... Remove / delete.

  You will see a dialog box asking if you are sure
  you want to delete the files, click Yes.

  Now... on the left, click on the 'Back' button in your toolbar.

  Now the remaining files should be your originals.

  If you delete the wrong files... recover from
  your basket now.

• How can I get my icon of network connectivity added to the notification (to the left of the date) area?

  original title: Hello, how can I get my icon of network connectivity added to the notification (to the left of the date) area?   Thank you, NT

  The icon disappeared after stopping at the wall accidentally. When I right click on the taskbar, go into the properties box and notification, network system icon is grayed out.

  Thanks for your help.

  Hi NT,

  You can read the following article and check if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  You can also consult the following articles and check.

  Show all icons in the notification area (system tray)

  Remove icons from the notification area (system tray)

  Hope this information is useful.

• ButtonField is not visible in the Simulator after adding to the HorizontalFieldManager?

  Hi iam trying to view an EditField and and a 'go' button beside it in the same line.  So I added them to horizontal FieldManager but in sumulatro only the search is coming and button is not visible.  If I add the button to directly _mainscreen that it is displayed in the following line. So, how do I make visible button after adding to the HorizontalFieldManager?

  Please give your support. Thanks in advance.

  private BrowserFieldDemo()
  {
  EditField edit = new EditField("", "search",10, EditField.FILTER_DEFAULT);
  HorizontalFieldManager searchBar = new HorizontalFieldManager();
  searchBar.add(edit);
  searchBar.add(buttonField);
  _mainScreen.add(searchBar);
  pushScreen(_mainScreen);
  }
  

  

  You can also limit the size of your EditField to leave room for your BitmapField.  In theory, you need only substitute getPreferredWidth() for your EditField, but you may have to substitute layout() as well.

  You can see an example of the fact of a ButtonField in this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=7430

  You can also find this useful Thread If you want to go in the direction of Manager:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=3745

  I found the code snippet according to who uses the layout to make sure you have 20 pixels to the right of the field:

  Protected Sub layout (int maxWidth, maxHeight int) {}
  Super.Layout (Display.getWidth () - 20, this.getHeight ());
  setExtent (Display.getWidth () - 20, this.getHeight ());
  }

• How many fields have horizontally with a label at the beginning of each line

  jdev12c

  I'm trying to implement search criteria screen myself.

  When I select a lookup field in a drop-down list, this field is added to the screen. It has a label, a text field and a selectOneChoice of the operator (with value of begin, end, especially, between the two, etc.).

  When to choose another field of research in the list, a new line is added to the screen.

  I want all tags must be aligned to the right, text boxes are aligned and the selectOneChoice is just after the text box.

  I tried to generate PanelFormLayout for each line, with lines of property = 1 and argument maxcolumns = 3.

  The problem I have with this approach is: labels for each line don't align. Also, I have data recovery problem within each PanelFormLayout. The mother of PanelFormLayouts, he sees several PanelFormLayout. But the returned value of the first PanelFormLayout.

  Please advice what kind of layout that I use. Thank you.

  You can do this using af: panelLabelAndMessage,.

  just surround all your filed with the horizontal band layout and simple true set for all fields, then surround group layout with an element of label and message board

  Source XMl-

  It will look like this - https://drive.google.com/file/d/0B0Usl2n1Wz8vUEtPdnVtUC1mcjA/edit?usp=sharing

  See - http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_panelLabelAndMessage.html

  -Ashish

• When I saw my site to load there is extra space added on the left hand side

  When I saw my site and load until there is an extra space is added on the left hand side and I don't know why or hot to fix it. I have attached two picture to show what I mean. Any help would be great.

  My workspace

  

  My overview

  

  This may be because of the frame of image outside the area of the page, any other content outside page page, any empty container etc.

  Thank you

  Sanjit

• AS3/Fx3, if no 'save' between several lines added, all the lines contain the last modified value.

  Hi all

  I'm a sucker for creating problems. I'm working on adding role and content to a client website management. Currently, I have problems with the management of the role page.

  It is a legacy application and the customer is unwilling to upgrade to Coldfusion 8 and Flex Builder 3 Professional, so 'use the new stuff' is not enough for a response. No, I did not select the colors and I don't have the power to change their .

  It is a populous example:

  

  Here's the situation:

  1. The management of roles (mxml) page receives its data from a pair of files xml, siteManagement.xml, and roleManagement.xml through cffile calls via a cfc
  2. The xml data is stored locally in vars XML until the clerk.
  3. If I click once on the button 'Add', change the 'Save Changes' and fields immediately (the changes to the file through cfc is validated), everything works as expected, except that resets the combobox of roles. This normally isn't a problem - it is often exactly the behavior you want, but I can't stop reset.
  4. If I click on "Add control" more than once between save changes, changin any field on a new line causes all other lines have the same value for the same domain. (problem 2)
     1. This behavior can be fixed by saving and reloading the xml data between each click on 'add a control '. the problem with this solution is that it clears the Combobox of roles, adding unnecessary clicks to add (sometimes several) controls for the datagrid control.

  Controls are added by adding a new child element var XML:

  private function btnAddControl_click (): void

  {

  var tempXML:XML = new XML;

  tempXML = controlXMLTemplate;

  If (ensureFileExistsForRole ())

  {

  rolesXML.role [cbRolePicker.selectedIndex] .filename. (@fileName == cbChosenFile.selectedLabel).controls.appendChild (tempXML);

  }

  on the other

  {

  Alert.Show ("something does not work...", "Error Control adding :");)

  }

  dgcControlLabel.editable = true;

  dgcControlID.editable = true;

  dgcControlType.editable = true

  updateControls();

  supposed selects new line - this isn't

  dgControls.selectedIndex = rolesXML.role [cbRolePicker.selectedIndex] .filename. (@fileName == cbChosenFile.selectedLabel).controls.control.length ();        xmlDisplay.text = rolesXML;

  saveRoles();

  where controlXMLTemplate is:

  < control controlID = "Control ID' controlLabel ="Label control"controlType ="type"editable ="false"visible ="false"/ >

  and is added to the filename element:

  < canAccess filename = "true" fileName = "" friendlyName = "" > "

  < controls >

  < / controls >

  < / name of the file >

  I don't know what is causing the problem with the datagrid control where a line edit causes changes in others. My first thought was that it is caused by all the changes and selections via xml calls for example;

  dgControls.dataProvider = rolesXML.role [cbRolePicker.selectedIndex] .filename. (@fileName == cbChosenFile.selectedLabel).controls.control;

  So I added the code to add a number to the values that feed the datafields hoping that have unique data would cure the problem. There can be no.

  It's the function/code that causes the role Combobox to reset but prevents the datagrid problem:

  private function loadSiteInfo (): void

  {

  cursorManager.setBusyCursor ();

  roleManager.RO.loadSiteData.addEventListener (ResultEvent.RESULT, loadSiteData_resultsHandler);

  roleManager.RO.loadSiteData ();

  }

  private void loadRoles_resultsHandler(re:ResultEvent):void

  {

  cursorManager.removeBusyCursor ();

  roleManager.RO.loadRoles.removeEventListener (ResultEvent.RESULT, loadRoles_resultsHandler);

  rolesXML = re.result in XML format;

  }

  I don't know how much information you need to help. I can post the code if necessary, but I have to be careful - it's something health.

  This line is suspect:

  tempXML = controlXMLTemplate;

  This means that you may re-use of the same instance for multiple lines.  Probably, you need to copy the template rather than just use it.

• Page master readOnly or protected fields always opens to page 2 of the PDF

  I have a fluid shape that I added some textfields to the Master Page to have on each page.

  I put the global linking for the filling of form fields can be accessed from any page.  It works very well, fill in the fields and the changes to the fields appear on each page.

  The problem: I need to lock these fields after submit.

  I added the JavaScript code in the reference material at my submit button that detects and sets the access to all page fields of body 'read-only '.  No problem with this script.

  I'm not an experienced writer of JavaScript, in order to lock the fields on the master page, I put each field individually to "readOnly".

  It works fine on page 1 of the final PDF, the fields are locked.

  On page 2, however, the fields are always available.  In fact, change the values in the page 2 fields also change values in the fields in page locked 1.

  I tried using the relative and the absolute som SOM to change the property but no change in the results.

  I also tried changing the 'readOnly' property 'protected' with no change in results.

  Can someone tell me what I am doing wrong?

  Hello

  Each master page has own number.

  To lock the second master page, you need to access it correctly, you can try a script like this:

  main.pageSet [0] .yourMasterPageName [index].filedName.access = "readOnly".

  index - index of the page master from 0. In your case it shoul be 1.

  Each master page has own number.

  Best reagards,

  Paul Бутенко

• as to the existence of a column added in the apex application database.

  Hello
  
  I created a table-based report apex application. Consider the table as Employee_details
  
  The columns in the Employee_details tables are
  
  *) Employe_id
  name *)
  ip_address *)
  host_name *)
  *) port_no
  *) sys_type
  *) email_id
  login_id *)
  *) sys_config
  *) sys_serial_no
  *) place_allotted
  *) internet_status
  
  and also I created an application that uses this column... Now, I need to add an additional column 'contact_no' in reference to the table...
  
  Only as I added in the table by giving 'Add a column' column is added to the table...
  
  But I need to add this additional 'contact_no' column in my current application as well as the columns existed.
  
  I went to 'Actions' in the application that I created and I went this column 'contact_no' of ' not displayed side on the side of the screen. Now it's displaying.
  
  But the problem where I did here is, when I'm logged into the application and I have once again connecting to the application of the "contact_ no" column which I added for display in the display field does not appear... Why?...
  
  Kind regards
  
  Hari R

  Hello

  If it's a table column then its best to add it to the IR by changing the IR report query.

  If you add through the Action button, and then you save the report as the default setting for him to keep appearing the next time you visit the page.

  Concerning