Field.SetFocus causes no stack trace error

Similar Questions

• Error KERNEL STACK INPAGE ERROR on Windows Vista SP2 blue screen

  Original title: KERNEL STACK INPAGE ERROR

  What can cause a crash with the KERNEL_STACK_INPAGE_ERROR message in a blue screen.  Ive had just a new hard drive installed.  Running Vista Home Premium with Service Pack 2.  Usually occurs when returning from standby or Hibernate mode.

  Hi JerryHines,

  This problem can occur if a requested page of kernel data could not be read on the paging file into memory, or the master boot record is infected with a virus.

  Method 1:  I understand that you have installed a new hard drive, run the disk check to repair bad sectors on your hard drive

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: Disable and re-enable the hibernation, see them steps outlined in the article below

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  For more information, please visit the link below

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article applies to Windows 7, not valid for Windows Vista)

• Is it possible to trigger a forced memory stack trace?

  There, I think of the stack trace that is done automatically on all running applications when "something goes wrong.

  I have an application that freezes up (I suspect it is a blocking of the thread) and it would be great to have a practical method to force the stack trace in the event of phones log.  (The phone still works ok, it's just the single application that froze).

  Unfortunately the user having the problem that's about 3 000 mi away from me, so I can just plug in the phone and use the option 'connect to the device.

  Doug

  Update: I guess I could always send to the user another app... one who deliberately misbehaves...

  You can trigger a stack trace by launching a Throwable.  You can take in your application so that the user sees no error dialog box.

• The JavaScript stack trace

  Hello

  I am writing a widget app works almost every time, but sometimes, he throws a ControlledAccessException, I get the message of my bt try-catch block, I'm not able to get the exception stack trace, it's the structure of the code that I use:

  Try

  {

  code.that.Crash ();

  }

  catch (e)

  {

  Alert (e); Watch ControlledAccessException error, without more details

  Alert (e.message); It shows "undefined".

  Alert (e.Stack); It shows "undefined".

  }

  Thus,.

  How can I get the error stack trace?

  As I know there isn't a way to inspect the stack trace in JavaScript itself.

• data paging error / kernel stack inpage error

  Just starting to get these errors.  I have a background of both limited computer posted patches go well above my head.  I tried to do a little, but I have to do something wrong.  Could someone help guide me through these errors solved?  I can boot the computer and restart it. This all started when I was on a game (taptiles) and he hit me, and then I couldn't get back to the game at all.  Then I started having problems when on the internet, it would be just me kick out unexpectedly. Now I only can access internet with chrome, can not access a recognizable homepage from internet explorer, the page is all the sentences and invite you. Any help you could provide would be wonderful.

  Original title: How can I correct an error in pagination of data from the kernel / kernel stack inpage error on windows 8

  Hello

  Thank you for visiting Microsoft Communities.

  I understand that you get the error message, and as you have problems with Internet Explorer.

  Sorry to hear about the inconvenience caused. Do not worry, we are here to help.

  Method 1: Microsoft online analysis

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Download this online scanner and perform a full scan on the computer. This will remove any virus infection that is in the computer.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Check disk

  This stop message indicates that the data page of the kernel of the required paging file cannot be read into memory. This stop message is usually caused by a bad block (sector) in a swap file, a virus, a disk controller or failing RAM error. In rare cases, it is caused when the resources of non-paged pool is exhausted. It is also caused by the defective material.

  Right-click on the windows on the lower corner flag on the left

  Select prompt (Admin)

  This will open the command window and type please Chkdsk /f /r and press ENTER.

  It will introduce the drive check and look for errors and try to remedy.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information about the error, please see the link below:

  Error message: KERNEL_DATA_INPAGE_ERROR

  http://msdn.Microsoft.com/en-us/library/ms854944.aspx

  For Internet Explorer related issue please follow the article below:

  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-crashes-stops-working#IE=IE-10

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  I hope this helps. And please answer if you still need help.

• DBAdapter retains the unique causing value sequence force error

  Hi gurus BPEL.

  I am facing a problem in EBS integration of the invoice of the OTM.
  AP invoice header is inserted, the AP invoice lines does not get inserted due to the below error in BPEL. Import of payment fails, as there are no invoice lines.

  
  Anomaly of the non-recoverable system:
  Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: DBWriteInteractionSpec Execute Failed Exception." insertion failed. The descriptor name: [APInvoice.ApInvoicesInterface]. Caused by java.sql.BatchUpdateException: ORA-00001: unique constraint (AP. AP_INVOICE_LINES_INTERFACE_U1) violated. Check the logs for the record output full DBAdapter before this exception. This exception is considered non reproducible, probably due to an error of modeling. To be classified as reproducible rather add property nonRetriableErrorCodes with the value "-1" for the deployment descriptor (i.e. weblogic - RA.Xml). Auto retry a reproducible fault set composite.xml for this invoke these properties: jca.retry.interval, jca.retry.count and jca.retry.backoff. All properties are integers. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.

  
  SOA DB Connections seem to retain the sequence used in the cache and assign the same when the Bill for the line is inserted. This causes the Unique constraint error when inserting the table of AP invoice lines in EBS.

  I call the standard APInvoices.wsdl to make the insertion AP_INVOICE_LINES_INTERFACE. I noticed that in the file APInvoice - or - mappings.xml contains the following code
  > the sequence name < AP_INVOICE_LINES_INTERFACE_S < / sequence-name >
  < table sequence-field = "AP_INVOICE_LINES_INTERFACE" name = "INVOICE_LINE_ID" / >
  < / sequencing >
  < cache >
  weak-reference < cache-type > < / type of cache >
  <-cache size >-1 < / cache size >
  true < always refresh > - < / always refresh >
  < / cache >
  < remote caching >
  weak-reference < cache-type > < / type of cache >
  <-cache size >-1 < / cache size >
  < / remote caching >

  Is their anything I can change something in the BPEL process to refresh the cache of the sequence all the time.

  Alternative, I think now is below.
  1. check with customer if they can do the sequence AP_INVOICE_LINES_INTERFACE_S as NOCACHE.
  2. pull the invoice line via pl/sql adapter and complete the invoice line. But in this case, I'm not sure if Web APInvoice service code will try to update with the generated BPEL sequence.

  Any direction on this issue will be of great help.

  Thank you
  Shobz

  Hi Anushal,
  Thanks for the reply.

  Hi all
  The problem has been resolved with the creation of this «sequencePreallocationSize» DBAdpater
  As this property is set to 50 DB adapter's default, it did not fit with the INCREMENT BY the AP_INVOICE_LINES_INTERFACE_S sequence that has been set to 1.

  What happens in the adaptor DB is, when the first record is created, it takes the nextval in the sequence (assume it is 20), however it uses then his own sequence internal for the next 50 files by reference to the value set in this property (by creating records with primary keys from 20 to 70) and only when this internal sequence is exhausted it will return to the sequence of database.
  Meanwhile, any other inovoice created AP would recover DB, which could be his word to say value 21, in conflict with the inserted by BPEL, throw a unique constraint.

  Setting this property to 1 or corresponding increment sequence solved the problem.

  Thank you
  Shobz

• in the drive without debugging stack traces

  Hello

  release notes for 11.5 indicate that the non-debug version of the player can provide stack traces now, but I don't see them.  I have to do anything special to access?

  Browser: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_5) AppleWebKit/536.26.17 (KHTML, like Gecko) Version/6.0.2 Safari/536.26.17

  Player version: 11.5.502.136

  Mac OS 10.7.5 (64-bit)

  The release notes, I am referring to: http://forums.Adobe.com/message/4827339

  Hello

  Please make sure that your SWF file is published in 18. As indicated in the following document, this feature is only available for the SWF version 18 and above.

  http://www.Adobe.com/devnet/articles/flashplayer-air-feature-list.html

  Please also note that the stack traces generated in the version non-debug player shows only the names of methods. Full stack trace info including line numbers and the name of the file, a debug version of the player (see content of the debuggers available for download here: http://www.adobe.com/support/flashplayer/downloads.html) is necessary besides the SWF itself published under a debug SWF.

  Here is an example of using the feature:

  package

  {

            import flash.display.Sprite;

            import flash.text.TextField;

   

            public class StackTraceTestCase extends Sprite

            {

                      public var console:TextField = new TextField();

   

                      public function StackTraceTestCase()

                      {

                                console.width = stage.stageWidth;

                                console.height = stage.stageHeight;

                                console.border = true;

                                this.stage.addChild(console);

                                foobar1();

                      }

   

                      private function foobar1():void {

                                foobar2();

                      }

   

                      private function foobar2():void {

                                foobar3();

                      }

   

   

                      private function foobar3():void {

                                foobar4();

                      }

   

   

                      private function foobar4():void {

                                foobar5();

                      }

   

                      private function foobar5():void {

   

                                try {

                                          var myVar:String = null;

                                          /*

                                           * This results in Null Reference error.

                                           */

                                          console.appendText(myVar.toString());

                                } catch ( error:Error ) {

                                          console.appendText(error.getStackTrace());

                                }

                      }

            }

  }

  And the output generated by the non-debug version of the player:

   

  TypeError: Error #1009

            at StackTraceTestCase/foobar5()

            at StackTraceTestCase/foobar4()

            at StackTraceTestCase/foobar3()

            at StackTraceTestCase/foobar2()

            at StackTraceTestCase/foobar1()

            at StackTraceTestCase()

• Too much to ask and get a "stack on error of flow.

  I have AS3 create 12 random var (actuelle1, play2, etc.) and then I ask him on average the 12 vars (number) until I get a specific average number. When I run the present in AS2, I get the question "script runtime error, continue to operate? I told him to run, and AS2 finally found the right set of 12 numbers to match a specific average number. In AS3, I get a "stack on error of flow. I know that all my AS3 swf need it's just more time to find.

  Any ideas for a fix?

  This is one of the possible approaches you can use. The following code generates a table of average values is what you set. Also note that you can change all the settings and generate any number of values with any means. Just stick to the timeline of the rocker and look at what is happening. I commented a few important points in the code:

  // required average
  var avgNum:Number = 10;
  // number of values to generate
  var numOfValues:int = 12;
  // set of generated numbers
  var numbersSet:Array = [];
  
  generateNumbers();
  // generates vlaues based on the settings
  function generateNumbers():void {
       var sum:Number = avgNum * numOfValues;
       var currentNumber:Number = 0;
       for (var i:int = 0; i < numOfValues; i++)
       {
            currentNumber = sum * Math.random();
            numbersSet.push(currentNumber);
            sum -= currentNumber;
       }
       // difference between required sum of all the values
       // and sum of numbers that are generated
       var dif:Number = numOfValues * avgNum - arraySum(numbersSet);
       trace(dif);
       trace(numbersSet);
       trace(arraySum(numbersSet));
       distributeDifference(numbersSet, dif);
       trace(arraySum(numbersSet));
       trace(numbersSet);
  }
  // adds fraction fo difference to all array memebers
  function distributeDifference(a:Array, dif:Number):void {
       // fraction to distribute
       var fraction:Number = dif / a.length;
       for (var i:int = 0; i < a.length; i++)
       {
            a[i] = a[i] + fraction;
       }
  }
  // sums up array members
  function arraySum(a:Array):Number {
       var sum:Number = 0;
       for (var i:int = 0; i < a.length; i++)
       {
            sum += a[i];
       }
       return sum;
  }
  

• Error on kernel stack inpage error and blue screen

  (Note: this post was created on behalf of another user.)

  Recently, my PC had blue screen errors.  Thinking it was probably a problem of aging HD, the HD has been replaced and a new install of Win XP Home Edition with Service Pack 2.  Blue screens persist despite the new drive.

  The error is a "Kernel Stack Inpage Error".

  It is a new drive with the same errors as before so I think that it is not a virus and probably a problem with another piece of hardware.  There is a minidump file available if need be.

  Can someone please help with these errors?

  Thank you.

  If you would like to get BSV and run it, then choose:

  Options, lower pane Mode, all the drivers

  You'll be on your way and see the battery and your ATI drivers.

  Updates Microsoft released the second Tuesday of each month (Patch Tuesday) so it would be on 07/12, but since you have SP2, I can't say what would happen or what updates you decided to install.  If you have accepted the recommendations of MS for video drivers (which are usually poorly), who knows what is happening.

• I installed a sniper art called win game it shows yellow field and gives Pure virtual function error

  I installed a sniper art called win game it shows yellow field and gives Pure virtual function error.

  Hello

  · What is the full error message that you receive with error code if any?

  I suggest you to refer to the manual of game for more information contact the Publisher of the game for support. There may be a specific game update that solves this problem because it seems to be linked to a C++ runtime error in the game.

• What are the causes of silverlight N8007 error code.

  What are the causes of silverlight code error N8007?  I have already been able to view the contents of netflicks, but no more.  He has always played by this "Silverlite" program or a recent change?

  Thaks in advance for your answer.

  Hi GaryFelder,
   
  Post your request in the Silverlight forums for assistance on this issue.
   
  Visit the following link to do the same thing:
  http://forums.Silverlight.NET/

• Upgrade 'Stacked vs. Non-Stack Build' error-

  During the upgrade from Vista to Win7, I am stopped by an "stacked vs. non-Stack build" Error Message... which means this message - means and how to successfully upgrade to Win7?

  For all questions, installation of Windows 7, the Windows 7 Forums are the best place to ask, as they came across these errors before:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• the stack trace is always printed with intercept Throwable even if printStackTrace is not called

  Hi, at my request, a single method, I want to print the stack trace that under certain condition. However I discovered that I still see at the event log the stack trace, even if I don't deliver the printStackTrace call. This would mean that wrestling only Throwable is sufficient to print the trace of the stack, which is really not desirable. Has anyone seen the same thing?

  Is there anyway to disable the automatic stack trace dump if Throwable is caught?

  It is behavior hormaux and I never found a way to influence him, anyway.

• Get a Stack Trace?

  If I debug my application on a real device and a runtime exception occurs, is there a way to get a stack trace or more information on where it happened?

  Thank you

  Travis

  Uncaught exceptions (and I believe also exception caught as catch (Throwable t)) are recorded in the log of the phone.

  You can open it in the past to the home screen, hold down the ALT key and pressing LGLG. The newspaper is usually quite saturated, be prepared to scroll for a while. The exceptions are in bold.

  Cheers, Barak.

• The Windows 7 Bluetooth stack Service error

  Too, I have this Bluetooth stack Service error, but for Windows 7 and it just started a few days.

  Why can't anyone solve this?

  No, it did not work.