Error KERNEL STACK INPAGE ERROR on Windows Vista SP2 blue screen
Original title: KERNEL STACK INPAGE ERROR
What can cause a crash with the KERNEL_STACK_INPAGE_ERROR message in a blue screen. Ive had just a new hard drive installed. Running Vista Home Premium with Service Pack 2. Usually occurs when returning from standby or Hibernate mode.
Hi JerryHines,
This problem can occur if a requested page of kernel data could not be read on the paging file into memory, or the master boot record is infected with a virus.
Method 1: I understand that you have installed a new hard drive, run the disk check to repair bad sectors on your hard drive
Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3: Disable and re-enable the hibernation, see them steps outlined in the article below
How to disable and re-enable hibernation on a computer that is running Windows
http://support.Microsoft.com/kb/920730
For more information, please visit the link below
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
(Article applies to Windows 7, not valid for Windows Vista)
Tags: Windows
Similar Questions
-
Cannot start PC, using Windows vista, download blue screen error stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)
Hello
1. do you get this error on startup or when working on the computer?
2. are you aware or any hardware or software changes to the computer?
Try to start the computer in safe mode and try to make a System Restore.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
System Restore:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
In addition, try and run the steps listed in the link below.
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly:
-
I have two Dell laptops, one was my mother and the other is mine (Inspiron 15xx and 1750). I deleted down two laptops using the restore factory images stored on computers. I want that they fully working before I sell them or given the to a friend or relative.
When I try to install Flash or Acrobat Reader, I first download and then run the installation program and then nothing happens, no screen of welcome, no please, wait or loading... dialog box, no error message, just absolutely nothing.
I am a programmer with a degree in computer programming and I built my own computer, reinstalled, installed drivers, software and firmware, so I thought I should be able to solve this problem, but as the still I had no luck so far.
I have:
(1) installed all Windows updates
(2) installed Windows Vista SP2
(3) installed the updates of BIOS, drivers, software and firmware from Dell.
(4) installed the last IE v7 to v9 present. (This fixes my problem to Skype "Sorry, we couldn't connect to Skype")
(5) installed the latest Microsoft Visual C++ 2012 Redistribution.
(6) searched on the internet for the solution and followed a few steps that I thought looked promising but no solution so far.
(7) I checked the logs install but they are empty either, I can't find the directory, or there is no log file here.
For me the main problem is that I don't get any information, i.e. None of the error messages or logs, which makes it very difficult to seek solutions that are specific to my problems. Anyone who can help me to identify the problem, it is find a mistake or a newspaper that shows where the problem is, would help me tremendously and close me solve the problem.
I think I need to install some type of update will miraculously fix the problem, as point 4 above, where IE upgrade to v 9 fixed my problem of Skype, but I have no idea what it would be.
Thank you in advance for all help me and I hope that this forum will help others.
Thanks Abzyx.
I use Firefox all the time and I would have downloaded Flash while in Firefox, but the download never worked. The only solution that worked for me was what I mentioned in the post above (message number 7).
Yes your right, I did not mention on the PDF reader, thanks for pointing that out.
I noticed that you mentioned using another like Sumatra PDF reader, so I had to look that.
I found that Nitro and Sumatra where 2 alternatives to Adobe Acrobat Reader. Nitro looked like a more advanced system, but it does not work. Sumatra seems simpler, but as PDF readers go, if I can read a PDF file, which is fine for me, Sumatra has worked well.
Research on the internet I found a video that has been really good for my problem. I'm looking for 'acrobat reader vista' and the 4 down link was a youtube video called "Install Adobe Reader in Windows Vista" on the page: https://www.youtube.com/watch?v=1wAki19nDSY
After you follow the instructions in the video, I am Acrobat works.
Basically, I went to the URL of the video: ftp://ftp.adobe.com/pub/adobe/reader/win/
Then try to find the most recent version, so I tried 11.0.16, but this does not work, the video shows using 10.0.0, so I thought I would try to use 11.0.0 and if this does not work, try the version 10.0.0. I found version 11.0.0 worked for me then once installed, I checked for update in Acrobat Reader and now I 11.0.8 and this seems to be the best version of work for my computer.
Thank you again Abzyx and everyone who help me by posting your comments. By studying what has been mentioned, internet search and try different installers and more clear, I found what I was looking for.
-
Windows Vista, several blue screen errors
Original title: BSOD
Good afternoon
I have the BSOD. Here they are in chronological order:
1 IRQL_NOT_LESS_OR_EQUAL 0X0000000A (0X0000001D, 0XFFFFFFC2, 0X82424EF8, 0X00000001)
2 0X000000c4 (0x000000A0, 0X96AEEA58, 0x995FCEE0, 0x0D99EEE4)
3 0X000000c4 (0x000000A0, 0X968F0DF0, 0x99406EE0, 0x053F1D0A)
4 0X000000c4 (0x000000A0, 0X9A651638, 0x993C4EE0, 0x10AB65F8)Additional information:
Windows Vista Service Pack 2
DualCore Intel Core 2 Duo E8400 3000 MHz (9 x 333)
Gigabyte GA-G33M-DS2R (2 PCI, 1 PCI-E x 4, 1 PCI-E x 16, 4 DDR2 DIMM, Audio, Video, Gigabit LAN)
DDR2-800 DDR2 SDRAM
BIOS: Award BIOS v6.00PG Modular
Could you help me... don't really know what to do...
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65----------------------------------------------------------
BCCode: 0a 0x0000000A
Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
The video driver or something affecting it would be questionable.At the end of this message, I'll post a bluescreen generic and in the next convenience store
How do to update the drivers and BIOS but also to check memory message.-----------------------------------
BCCode: 0a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool
- Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.
Comments
Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.
BCCode: 0a 0x0000000A<-- read="" this="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-==================================================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Error updating Windows Vista Sp2 ox50004005
Dear Admins,
I try to update my windows vista Sp1 to SP2, but it gives the ox50004005 error code. updating until the last stage 3 but after that he brings updated.
Please, I can't use the new programs, they all want SP2. Also, windows live messenger.
Thank you.
Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):
1. what application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
2 to give application Norton or McAfee application ever been installed on this computer?
3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
4. is this really an error 0 x 80004005 (vs 0 x 50004005)?
====================================
Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack.
http://support.Microsoft.com/kb/967818The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
http://support.Microsoft.com/kb/949358Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Hi, community
I have a problem with this adapter. As soon as I plug the windows (vista) HDMI cable crashes and I get a 'blue screen '. I tried everything and nothing worked. The driver is version 7.15.11.5655 dated dated 23/08/2007.
Any information will be helpful!
PS - I tried to download the update of R180763 site of Dell, but I get an error when unzipping (110 error code).
Rgds
/ Nairo
-
Installation of Powershell 2 on Windows Vista causes Blue Screen of Death
I tried to install Powershell 2 on my Windows Vista Home Premium (with SP2) machine. I use the Windows6 package. 0-KB968930-x 86.msu. However, in the middle of the installation, I get a blue screen of death, and the computer restarts.
I don't know if it is a help, but the problem report displayed when the machine came back to the top is as follows:
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
More information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 00000000
BCP3: 8FB3DB9C
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini073110-01.dmp
C:\Users\Martin Lee\AppData\Local\Temp\WER-142803-0.sysdata.xml
C:\Users\Martin Lee\AppData\Local\Temp\WER25F6.tmp.version.txt
Hello CodeMunger,
You can post on the Forum of Microsoft Powershell. Click here for a link to the forums.
They may be better able to help with your questions.Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
kernel stack inpage Stop error: 0 x 00000077
Original title: kernel stack inpage error
Can someone help me with this problem please?I have the BSOD - Kernel Stack Inpage Error. Stop: 0 x 00000077
I've had this for a few months now and cannot understand what is the cause or how to fix it.
My security company (Kaspersky) told me that it was a corruption of memory.
I have windows SP3 is already installed.
==================================================
Dump file: Mini012812 - 02.dmp
Crash time: 28/01/2012-14:20:12
Bug Check String: KERNEL_STACK_INPAGE_ERROR
Bug check Code: 0 x 00000077
Parameter 1: 0x00000001
Parameter 2: 0x00000000
Parameter 3: 0x00000000
Parameter 4: 0xf792ad24
Caused by the driver: ntoskrnl.exe
Caused by the address: ntoskrnl.exe + 22f43
Description of the file:
Product name:
Company:
Version of the file:
Processor: 32-bit
Plant address: ntoskrnl.exe + 22f43
Stack address 1: ntoskrnl.exe + 3be48
Stack address 2: ntoskrnl.exe + 68dd6
Battery 3 address: ntoskrnl.exe + 692 has 6
Computer name:
Full path:
Number of processors: 1
Main version: 15
Minor Version: 2600
Size of the dump file: 90 112
====================================================================================================
Dump file: Mini012812 - 01.dmp
Crash time: 28/01/2012 11:59:40
Bug Check String: KERNEL_STACK_INPAGE_ERROR
Bug check Code: 0 x 00000077
Parameter 1: 0xc00000b5
Parameter 2: 0xc00000b5
Parameter 3: 0x00000000
Parameter 4: 0x11a81000
Caused by the driver: ntoskrnl.exe
Caused by the address: ntoskrnl.exe + 22f43
Description of the file:
Product name:
Company:
Version of the file:
Processor: 32-bit
Plant address: ntoskrnl.exe + 22f43
Stack address 1: ntoskrnl.exe + 3afa9
Stack address 2: ntoskrnl.exe + 3be1b
Battery 3 address: ntoskrnl.exe + 68dd6
Computer name:
Full path:
Number of processors: 1
Main version: 15
Minor Version: 2600
Size of the dump file: 90 112
==================================================Let me know if you need anything that anyone else. Thank you!
Hello
Error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.
See the link below to fix the problem.
You receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR"
http://support.Microsoft.com/kb/315266Note:
Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost -
data paging error / kernel stack inpage error
Just starting to get these errors. I have a background of both limited computer posted patches go well above my head. I tried to do a little, but I have to do something wrong. Could someone help guide me through these errors solved? I can boot the computer and restart it. This all started when I was on a game (taptiles) and he hit me, and then I couldn't get back to the game at all. Then I started having problems when on the internet, it would be just me kick out unexpectedly. Now I only can access internet with chrome, can not access a recognizable homepage from internet explorer, the page is all the sentences and invite you. Any help you could provide would be wonderful.
Original title: How can I correct an error in pagination of data from the kernel / kernel stack inpage error on windows 8
Hello
Thank you for visiting Microsoft Communities.
I understand that you get the error message, and as you have problems with Internet Explorer.
Sorry to hear about the inconvenience caused. Do not worry, we are here to help.
Method 1: Microsoft online analysis
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Download this online scanner and perform a full scan on the computer. This will remove any virus infection that is in the computer.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Check disk
This stop message indicates that the data page of the kernel of the required paging file cannot be read into memory. This stop message is usually caused by a bad block (sector) in a swap file, a virus, a disk controller or failing RAM error. In rare cases, it is caused when the resources of non-paged pool is exhausted. It is also caused by the defective material.
Right-click on the windows on the lower corner flag on the left
Select prompt (Admin)
This will open the command window and type please Chkdsk /f /r and press ENTER.
It will introduce the drive check and look for errors and try to remedy.
Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
For more information about the error, please see the link below:
Error message: KERNEL_DATA_INPAGE_ERROR
http://msdn.Microsoft.com/en-us/library/ms854944.aspx
For Internet Explorer related issue please follow the article below:
http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-crashes-stops-working#IE=IE-10
Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.
I hope this helps. And please answer if you still need help.
-
Error on kernel stack inpage error and blue screen
(Note: this post was created on behalf of another user.)
Recently, my PC had blue screen errors. Thinking it was probably a problem of aging HD, the HD has been replaced and a new install of Win XP Home Edition with Service Pack 2. Blue screens persist despite the new drive.
The error is a "Kernel Stack Inpage Error".
It is a new drive with the same errors as before so I think that it is not a virus and probably a problem with another piece of hardware. There is a minidump file available if need be.
Can someone please help with these errors?
Thank you.
If you would like to get BSV and run it, then choose:
Options, lower pane Mode, all the drivers
You'll be on your way and see the battery and your ATI drivers.
Updates Microsoft released the second Tuesday of each month (Patch Tuesday) so it would be on 07/12, but since you have SP2, I can't say what would happen or what updates you decided to install. If you have accepted the recommendations of MS for video drivers (which are usually poorly), who knows what is happening.
-
Windows Vista SP2, is error (0 x 80070490)
I bought this computer in 12/2007 and Windows Vista SP1 is already installed when I bought, but now the updates for Windows Vista SP2 and when I click on install request I accept the terms, but then I get a this: ERROR NO FOUND (0 x 80070490) and I got to help, but this error does not appear on the errors. What can I please I need help ASAP!
friend of Bill w.,
Go through this article , because it gives the steps to solve the problem you are experiencing. Post back with the results.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Installation Windows Vista SP2 fails with 737D error code
When you install Windows Vista SP2 via Windows Update program, I continually receive an 737D error Code. This error code says "Windows cannot update services and important files while the system uses them. Save any open files, and then restart the computer. »
Has anyone encountered this problem and found a solution?
Thank you
Joe Kunkel
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
80070490 error code when you try to install windows vista sp2
OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!
OK to start with I have a 32-bit with sp1 operating system.
I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
I HAVE A DVD OF WINDOWS, SO IT WON'T WORKSOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ITS REALLY ANNOYINGHello
1. who is the antivirus installed on the computer program?2. What are the steps you tried to solve the problem?
Download and install the update the system analysis tool80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
http://support.Microsoft.com/kb/976920Search for the error message in the event viewer.
Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.
For more information, see:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
I hope this helps. -
Not to install Windows Vista SP2 error Code 80070005
I tried to install Windows Vista SP2 32 bit and I have SP1. When it is done install says it failed and it gives me error Code 80070005. And I do not have enough disk space. Any suggestions?
Hi, GregDaSpider,
Try the resolutions listed here:
0 x 80070005 access denied. You are not allowed to perform the requested operation.
http://support.Microsoft.com/kb/816731
Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
-
Error 0x8007045D when you try to install Windows Vista SP2
Hello
Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...
The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.
Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?
Thanks for your help!
OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.
Chkdsk /f found errors it corrects.
I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.
The good news: I still have a functioning computer.
The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.
I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.
I guess I have no choice.
I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more
Microsoft security essentials is a better a v for not update couseing problems.
You can allways put avg in the back.
not having is not enouph to free space for temporary files can couse problems too.
Maybe you are looking for
-
Re: Satellite C660 does support Windows 7 64 bit?
My Toshiba Satellite C660/01b Notebook PSC0LA-01C01H provided with Windows 7 Home Premium 32 bit installed. I later upgraded to Windows 7 Professional 32 bit. It supports a maximum of 4 GB of RAM.Celeron Dual-Core T3500 CPU supports 64-bit processing
-
Airport Express do not work when the mac has been turned off
I plugged our mac mini and the Airport express separately to the internet via a network hub. When I turn off the green light on the airport Mac Orange and blinks. The internet connection disappeared. Is anyone know how I can configure the network, so
-
I frequently get AW SNAP Page Unresponsive notifications in all browsers, including Internet Explorer, Firefox, Chrome, Opera and Safari which seems to me that there is a set of operating system or a computer problem any. I use one regularly well ma
-
Read blackberry res folder file
I want to read the file from the "res" folder on blackberry. The file I used is a javascript file. I used this code InputStream in = classs.getResourceAsStream("file.js"); But I get "cannot find this path" and I also use another code String srcFile =
-
BlackBerry Blackberry Z10 devices swap IDS
Just had a nightmare after buying a zio. I was using a 9900, woman had a 9700. I did an exchanging device to load the z10 with the memory card. My wife took a fancy to my old phone. employee blackberry desktop software to load its data into the 9900.