Fields of rotation and repaint

Hello

I am currently having problems with a screen that I develop, I run a my own implementantion of a textField that basically stretches from textField but excludes a height and width figures and therefore attracts. The problem is that I overloaded the sublayout method to set these numbers so when the screen is turned the fields with expand. My problem is that it appears to be painted according to the previous statements of the values.

Am I missing something, or am I on the wrong track?

See you soon

PS I meant it works ok on a simulator, but seems to be a behavior as described above on the deveice

If I had to make a wild guess, I would say that in the sublayout(), you're bound to get outdated any getWidth() values / getHeight() put apart from the fields, you are sure to have already exposed (as in layoutChild (child, w, h) with child.getWidth ()) later. This is certainly true for screens, managers and field - my guess is that it applies also to the display.

Stop using Display.getWidth () and use the width of the past down to you in your sublayout() call. This value is guaranteed to be correct.

Another possibility would be to substitute sublayout() of your screen like this:

protected void sublayout(int maxWidth, int maxHeight) {
  myApp.screenWidth = maxWidth;
  myApp.screenHeight = maxHeight;
  super.sublayout(maxWidth, maxHeight);
}

When screenWidth and screenHeight are members public static int in your application (or your main screen). You can then use these screenWidth / screenHeight anywhere you need instead of Display.getWidth () / Display.getHeight () (and eliminate a call requiring the signature in the process).

Tags: BlackBerry Developers

Similar Questions

Form fields to paste on the new form: pasted fields are resized and rotated.

Form fields to paste on the new form: pasted fields
are resized and turned.
It started just past this week. I created fields on an expense
form of report and some fields have calculations. The form is current
updated, but I want to use the same fields on the new PDF to maintain the
calculations.
When I copy the forms of the old PDF and paste to the new PDF, fields
have been squashed horizontally and vertically elongated.
The original PDF is set up in the landscape and therefore the new PDF.
I checked the properties of the fields, and they show a 270 rotation or text
in the field. But nothing I try turn the fields at their own
orientation.
Has anyone else seen elsewhere?

Yes, this happens when the rotation of the source and target documents page is not the same.

It is not really a good solution to this problem at the present time, except to re-create one of the files after not rotating, or to re - create the fields.

Rotate and move the 16-bit Image

I would like to rotate and move a 16-bit RGB (U64 in LabVIEW) image. The IMAQ turn and shift functions do not accept this type of image, but they do not accept an image in 16-bit grayscale (I16 in LabVIEW). Unfortunately, this clips all values in my original image since it extends from-32, 767 to + 32 767. The ExtractColorPlanes function requires a 16-bit image to be wired as the destination image but the IMAQ create VI does not U16 to create image.

Any ideas?

Just to be proactive... Here is an example of the problem. I tried to download a (small) 16-bit tif, but is not a valid extension to download. Photoshop allows me to record a 16-bit RAW, TIF or PSD: none of which can be downloaded. Sorry for the inconvenience.

How image rotation and displacement by using different origins

Hello

I use LabVIEW 8.5 and 8.5 of Vision.

I need to rotate, scale, and move a 2D image regarding one aspect of the image. I use IMAQ turn and shift, but I don't know what is the point of reference or originally used in this function. The coordinates of the image is very important in my application because I need these details to complete the recording of the image.

My question is as below:

(1) the origin (0,0) of an image is located in the upper left corner, can I change it to the center of the image?

(2) how can I specified a certain point (coordinated) as a reference for the rotation and scale?

Your help is very appreciated. Thank you.

Hello

Thanks for the idea, I'll try it soon.

Best wishes

BlackBerry Z10 weird rotation and swipe

Just an observation on the rotation and slide on the Z10.

I normally have the Z10 in a loading dock that it was lying on its side.

The screen and the icons are on the side and so I have to drag from right to left. When it moves to the active forms (e-mail for example) then rights itself and shows this screen standing and I can drag up from the bottom of the screen.

Why so it a fashion landscape, all screens not only works in this mode and you move between slide everywhere (and make your head spin!) and upper (or annoyingly out of the docking station)?

Thank you

S

You have a dock? From where?

What you see, it is known and probably is fixed in OS entry versions. BlackBerry has to do all the rotating screens... and some users say that this question is exactly why BlackBerry itself has yet to release the loading OEM.

Descriptions of fields UserTable.txt and UserVariables.txt

Hello

I would like to get descriptions of fields UserTable.txt and UserVariables.txt . These two files are in the package.cab from an ACS SE 1113 running V4.2. These files, which use a CSV format, do not include a header with the descriptions of the fields row, or I found this information in the documentation of the ACS.

The reason is that we receive a copy of all the days of package.cab and from there, we would like to write an application to generate a daily report formatted for each user with several areas, including:

Name

MaxSession

MaxSess2

View profile

Aging policy

Description

So far, I have discovered the name and MaxSessions columns. But not the other fields, which are probably also included in UserTable and Uservariables text files.

Kind regards.

Dear Albert

Why not take a look at aaa-reports! company? We can automatically import the cab file and extract the data you want... and more.

www.extraxi.com

through what new fields of contacts and accounts are added?

through what new fields of contacts and accounts are added?

Hello

You can add new fields of contacts and accounts through fields & views.

Thank you

Eloqua Experts

How to add new fields of contacts and accounts?

How to add new fields of contacts and accounts?

You can use 'Fields' and 'View '.

What are the security settings to lock a form with fields to fill and still allow someone drive to fill in the fields as as to save the form and print it?

What are the security settings to lock a form with fields to fill and still allow someone drive to fill in the fields as as to save the form and print it?

You want to allow someone to open your document and fill in the form (the fields that you have created), but not change or edit the form, right? Here is the answer - assuming you use Acrobat Pro and someone will open the PDF with the Acrobat Reader 9 minimum and more:

Tools > Protection > encrypt< encrypt="" with="">

Select YES to change security.

Opens in a new window:

Do not select NOT open the Document (or will require a password to open the document.)

SELECT: Permissions (check the box next to ' Restrict editing and printing of the document. ")

Change the following 2 settings in the drop-down list box:

Printing allowed: select high resolution

Changes allowed: select commenting on, fill in the fields on the form and signature of signature fields
Selected leave: "enable access text for playback devices to screen for people with visual impairments.

Change password Permissions (insert a password)

Leave all the other settings alone in 'Options '.

OK - OK

Again enter the Permissions password (the one you entered above)

OK - OK

Save the PDF file to apply security [notice that (SECURED0 will appear after the title of the document]

Animate using rotation and the puppet tool. Continuously rasterize mess it upward.

In After Effects CC... Trying to animate a vector arms using rotation and the puppet tool. The animation looks good until I hit the button to rasterize continuously on this layer. He then gets distorted and cut out. I need to be continuously rasterized, so it's not pixelated. Any suggestions on how to solve this would be great.

In simple terms the effect of pupet pin uses space Composition and an alpha chanel of the first image to distort the pixels on the screen. So if you move or change the position or scale of the pixels after the first image to the assistance of any transformation or the effect, you now moved the original source of the pixels and puppets pin breaks. That's how the effect is designed and it's the only way it works.

There is only a single correct workflow. Set up a model that is large enough to include all of the image that you want to animate when played back on the scale of 100% or a distance from the unit corresponding to the value of the camera zoom, if you size your layer of pine puppets if used in a comp. 3D IOW exceeds 100 percent in the final model, your computer is not big enough , or in a 3D model, if you want to move the camera at 1/4 the distance of the Zoom value of the camera to the layer of puppet pin your model of puppet PIN must be 4 times bigger.

Animate the effect of pin puppet

Bring the composition of spindle of puppets in yoiur main composition and apply other effects, transformations or any other manipulation, you need to perform to achieve your desired results.

Puppet PIN is designed for this workflow and when used properly it is a very practical tool.

Field rotation and the signature of the page

Hello
I ask for help because I spent too much time comparing my PDF files to see where I am going wrong.
I received a document with a clockwise rotation of 90 degrees for all pages. Compliance readers apply the
rotation to display content in a readable way.
So, when I connect the document (with a visible signature field), the Visual representation of the signature is turned. I went to the ISO 32000-1 standard
and discovered the Dictionary widget annotations (table 188) MK.
Here is an example of the widget annotations that I produce now:
```
5651 0 obj
<</MK <</R 90>>/F 4/Type /Annot/Subtype /Widget/Rect [100.0 475.0 356.0 731.0 ]/FT /Sig/DR <<>>/T (Sign5929838)/V 5649 0 R/AP <</N 5661 0 R>>/P 5629 0 R>>
endobj
```
But the representation of the signature is not properly aligned.
I compared what is Acrobat 8 Professional. So far, I have not found any difference, but these signatures are properly aligned.
```
5636 0 obj
<</Rect[39.8122 525.182 153.319 702.22]/Subtype/Widget/F 132/P 5634 0 R/T(Signature2)/V 5660 0 R/DA(/MyriadPro-Regular 0 Tf 0 Tz 0 g)/FT/Sig/Type/Annot/MK<</R 90>>/AP<</N 5637 0 R>>>>
endobj
```
(Acrobat is re - ordering items before you save the file)
Well, I think I need some looking nine to understand when I was wrong.
Here are the complete files:
http://www.terafiles.NET/v-121441.html (by me)
http://www.terafiles.NET/v-121442.html (in Acrobat)

OK, I finally found what is happening behind the scenes.

The entry/r of the MK dictionary is just an informative statement. It's not the PDF reader tilt the signature field.

Acrobat modifies the current transformation matrix to do this.

It's sad, that it is not clearly stated in the ISO standard.

Airport Extreme connected to TIVO: why I can not change Type firewall for IPv4. Field displays IPv6 and is grayed out so I can't change.

TIVO requires certain ports to be unblocked. So I try to add the ports requiring TIVO. But when you try to add the default Type of firewall IPv6 Port Mapping ports and I can't change the value of the IPv4 Port Mapping because the input field is grayed out and no is not accessible. With Port IPv6 mapping I enter values in all areas except for the IPv6 address because I do not know what value to enter. I think the button 'save' ' is not available to hit because the IPv6 address field is empty or not valid. Note: my router Mode is ' Off (Bridge Mode). Same questions if my router DHCP Mode.

I changed my router Mode DHCP and NAT, then on the Type of firewall on the default page add ports, IPv4 Port Mapping and I could add ports but with this setting, I couldn't connect to internet in my Airport Extreme: my status remains orange light flashing.

I use Comcast and my Airport Extreme is connected to my Comcast router using ethernet.

I use my Airport Extreme as a router (wired and WIRELESS) and as a backup device.

My TIVO is connected to my Airport Extreme using ethernet.

How can I add the Ports requiring TIVO.

Golden in the networking rule. ....... Never try to configure port mapping when you have two devices on the same network the two acting as a router.

Unfortunately, this is exactly what you're trying to do.

You have three options:

(1) run the Comcast router "as what" and configure the port on the device of Comcast mapping... .the airPort Extreme must be configured in Bridge Mode when you do this.

(2) lance to the AirPort Extreme router Mode of DHCP and NAT and configure the ports on the airport map... the peripheral Comcast must be configured to operate as a simple modem in Bridge Mode when you do this.

(3) lance to the AirPort Extreme router Mode of DHCP and NAT and configure the ports on the airport map... swap Comcast modem/router you have now for a simple modem (it will have only a single Ethernet port).

In other words, either the Comcast is defined as the router and AirPort Extreme is in Bridge Mode... or... the AiPort Extreme is configured as a router and Comcast must be configured in Bridge Mode.

If you choose Option 1, then we can not help you on a matter of Comcast router. In bridged Mode, the AirPort Extreme requires no configuration.

If you choose Option 2 or Option 3, then we the following port values that the Tivo device needs:

Public or UDP ports

Public TCP

UDP private

Private TCP

In addition, you need to find the MAC address for the TIVO. It is a long code that looks something like this, for example:

A1: B2: C3: D4: E5: F6

A link to the Tivo instructions for port mapping would also be very useful. I have done this with a TIVO in the past, but is for some years.

If all goes well, an expert of TIVO will post to lend a hand.

Works in XP - Desktop rotated and unable to change the right rear side up

original title; Works on XP and did something I can't fix.

Works on XP and did something I can't fix. Somehow, I bent down or did something and display is now turned so all the icons to ask '' out there '' and the command bar goes from top to botton on the right of the screen and on the side. Help!

Hi Bob5936,

Try pressing Ctrl + Alt + TOP Arrow Keys (or one of the other Arrow Keys).

Also right-click on the empty desk > graphics > Rotation.

I hope this will help.

Field has changed and info lost, is it possible to post a link to the caching of information?

Hi people

I've been a muppet!

The company that I worked was placed in liquidation and I buy my computer. I brought home and you want to transfer files from it to my home network, so I changed the field of the 'work' to the WORKING group - thinking this would be a simple way to do this. How wrong was I? I looked on the forums and seen elsewhere one was a stupid mistake. So I can connect using the administrator password, but all my data disappeared. I had read that it is all "cache" somewhere but I don't know how to connect the computer again (I don't understand really how caching works). As the company has closed now, I won't be able to connect the PC to the server again (which seemed to be the best way to repair).

I'd appreciate any help

see you soon

Remove the computer from the domain will invalidate the cached passwords that you used to log on to your machine, but it does not delete any files. Fortunately you can connect as an administrator. As an administrator, you should be able to restore your computer to its previous state by performing a "System Restore" to a time before you deleted from the domain.

"How to restore Windows XP to a previous state"
<>http://support.Microsoft.com/kb/306084 >

However, as an administrator, you should still be able to access the files on your system. Search the directory:
C:\Documents and Settings\DomainUser
Where you replace "DomainUser" with the username you used to log on as. If you have file permission problems, then try to take ownership of files...

"How appropriate a file or a folder in Windows XP"
<>http://support.Microsoft.com/kb/308421 >

Since you no longer have access to the domain, it is better to create a new local user, transfer of ownership of the files of this user and stay out of the area.

HTH,
JW

Backup drives off-site rotation and Vista

I have automated backup set to run once a week on an external drive. I have 2 drives external 1 TB identical. I want to turn a drive off-site on a regular basis of the semi - once a month maybe. When I turn a drive in, Vista will recognize such things it believes that it already saved is more on target and to fill all the changes since the last backup on the freshly turned disc? Or Vista restarts with a full charge whenever I have one of the disks in rotation? Both disks must have the same name of the drive or Vista will be ok with a drive name different than that currently attached to the system is always assigned the same drive letter?

Hi Peter O FL

Welcome to the Microsoft Vista answers Forum!

As you have two external drives to save data, once you connect the first hard drive windows will check the last back up and doesn't save changes and refresh it and it's the same process with the other hard drive also.

To help you understand more about how restore and backup works, look for the link below:

Explore the features: Windows backup center and restoration

http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

Backup and restore: frequently asked questions

http://windowshelp.Microsoft.com/Windows/en-us/help/9eb3d150-FE33-41A0-B7F6-233d7fe4460a1033.mspx

Hope this information is useful.

Let me know if it worked.

All the best!

Thank you, and in what concerns:

Samhrutha G S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Fields of rotation and repaint

Similar Questions

Maybe you are looking for