Works in XP - Desktop rotated and unable to change the right rear side up

Similar Questions

• Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Hello

  For someone to really help him, it is important to give as much information as possible.

  You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?

  If it happened "yesterday" did you updated anything or whatever installed?

  Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?

  What TV card are you using and have you verified that this works correctly?

  If you get not a photo is the antenna in place properly?

  Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• All of a sudden when I click a Google Calendar item, I get a blank page and am unable to change the element.

  This same problem was asked months ago ( https://support.mozilla.org/en-US/questions/976863#answer-564132) and it has NOT been resolved. Turns on Google Calendar.

  I'm having this problem since the 29,0 upgrade FireFox just released (I'm on Windows 8). Really me honks, too!

  When I try to edit an event, the page never gives up and is empty. It works in Chrome, but I hate Chrome and do not wish to give up FireFox, unless no one bothers to fix this problem!

  The steps that I've taken (which did not work):

     Turned off extensions and restarted browser
     Cleared cache and cookies, then restarted browser
     Changed FF connection settings per instructions
  

  PLEASE solve this problem instead of ignore it!

  I thought about it! Apparently, YouTube automatically installed a plug-in that I knew of high definition. Once I removed it, everything works fine, including Google Calendar (and do not receive the error, either).

• HP 15r205tu: State failure in bootnig and unable to reduce the brightness of the display of power

  I bought HP 15r205tu notebook on 19/05/2015 and installed windows OS 8.1, but when the OS starts, I get error DRIVER_POWER_STATE_FAILURE. I did already reinstall OS twice but no luck. Another problem with the function of luminosity. Impossible to reduce the brightness of the laptop. Please help me to solve the problem as soon as possible.

  Hi @renjithcr90 ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 15-r205tu HP and questions with failure then the starting state and unable to reduce the brightness of the screen. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated. If the system is not up-to-date, it could cause your question.

  Make sure that you reboot the system twice, it will check the updates of Windows at this time here.

  Thank you.

• Calendar view-only and users are unable to change the time.

  We use Windows Server 2003 R2 active directory and group policy.

  Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

  pls sugget me to resolve this issure

  Calendar view-only and users are unable to change the time.

  Hi sunil77,

  Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.

• Why desktop screen display upwards on the left side of the monitor screen and white is on the right; Properties show nomal.

  Why desktop screen display upwards on the left side of the monitor screen and white is on the right?  When I do my office they show nomal properties.  Everything seems to be normal.  Thank you

  Hi Sdaugherty3,

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

   

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  I hope this helps.

• Volume on the taskbar was hidden without changing the setting.__Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Missing notification icons:
  3 ways to recover...
  (1.) the easy way, if you're lucky:
  Right click on the task bar > click Properties > at the top, click on Notification area > can you put a check mark on the network? If so, you're done.

  If it is unclickable.
  2.) use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
  Depending on the version of Vista, you have, use the method two or three.
  One when you're done, return to #1 above and click on the box.

  3.) do a restore ysytem. Choose the date at which the icon was present under your restore point.
  Here is the tutorial:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  t-4-2

• I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I ha

  I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you

  Hello

  Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.

  You can do it from the control panel as well.

  This would make CD player as default PDF Viewer.

  Concerning

  Sukrit diallo

• I am unable to change the links page of the site and unable to see the file manager

  I have my site earlier designed by a guy, now he is not in contact, but I am unable to change the links page of the site and unable to see the file manager, even if I opened a session in Panel. admin help, please

  catalyst for business he did

  Did you get the site built through Muse?

  If this is the case then under settings, there will be an option to enable editing for content you will need to check.

  If this isn't the case, then the person who built the site you put authorized role which has no access to certain things, you can see that if you can go into the settings and roles and change it OR contact this person to give access you.

• I'm new to LR and did install you on a Mac desktop computer and laptop.  On the laptop, the basic function under develop simply disappeared.  I'm lost.  Help.

  Question: I'm new to LR and did install you on a Mac desktop computer and laptop.  On the laptop, the basic function under develop simply disappeared.  I'm lost.  Help.

  This is a common problem. The basic Panel is simply hidden.

  Billboards / of masking is actually a function of Lightroom, but it is intuitive--not many people know that there are - for the most newcomers are thrown when a Panel is somehow hidden.

  Right-click anywhere in the area of the Panel on the right hand side and a context menu will appear.

  Click on the basic option to re - appear the basic Panel.

• Unable to change the solid color background

  original title: my wallpaper is unable to change the solid color, no matter what I select. I have 3 users defined on my Windows 7 Ultimate, and this happens for only one to three logons.

  my desktop background cannot be changed to solid color, no matter what I select. I have 3 users defined on my Windows 7 Ultimate, and this happens for only one to three logons.

  I usually use the 'personalization' feature to select the themes, but he 1) is not seen when I select a theme and 2) wallpaper is a solid color when I save the theme. All the other personalization... that is, the window color, sound and screen saver work as advertised. It's just the wallpaper which won't be not 'take'
  Same thing happens when I try to change the background to something other than a solid color (I can choose any solid color I want). He can't do the "slide show", can only select a single peak, cannot set the background with the help of a right-click on a photo. Can't even get the default value of Windows 7 or Windows 7 Basic background to display.
  I even went as check the settings of "accessibility". No joy...
  Any ideas?

  Hello

  Thanks for posting your query in Microsoft Community!

  According to the description, you are facing problems with background screen change. In order to quickly provide a solution, please answer this question:

  Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if it works.

  Impossible to change the background image in Windows 7

  http://support.Microsoft.com/kb/2504610

  Method 2: If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the below link to fix the user profile damaged.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

   

  If you need further assistance, please answer and we will be happy to help you.

• I'm unable to change the family settings on standard account even though I am the administrator

  I am the administrator and want to change the settings for games/ratings on my son's standard user account, but it won't let me... Very frustrating!

  He returns constantly with the message: unable to make changes to parental controls settings. If the problem persists, consult your system administrator

  I have read many previous posts on this issue, but it seems that nobody has provided a solution that I can find!

  Hi TeenaWilson,

  Welcome to Microsoft Community and thank you for the query display. Looks like you are not able to modify the parental control on a standard account.

  Try these steps and check:

  Method 1:

  Disable UAC (User Account Control) and check the result.

  See: How can I change the behavior of user account control by using the slider?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Method 2:

  Step 1:

  I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2:

  If the problem persists not in the new user account, try and fix the damaged user account, follow the link below:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Method 3:

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article.

  The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. For more information how to make SFC / scan, please follow the following link:

  http://support.Microsoft.com/kb/929833

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  Hope this information helps. If you have any other questions feel free to respond and we will be happy to help you.

• Aspire Switch SW5-012 10 W8.1 I'm unable to change the size of the on-screen keyboard.

  On my new Aspire Switch SW5-012 10 with Windows 8.1, I am unable to change the size of the on-screen keyboard. Microsoft can't help and refers to the Acer support.

  Is there a solution to this?

  There is no way to resize it.

• Shuttle with cascade LOV and pre-populating on the right side

  Good afternoon

  In my form, I have a piece of text to a certain number of tickets, a drop-down list for a site and a shuttle service to the employees of the site.  If I select a site in the drop-down list, the shuttle refreshes and I can choose employees.

  Here's the wrinkle, if I get a ticket number, it triggers a dynamic action to pick up the site and all selected employees.  I checked the values returned and the dynamic action works as expected.  When the site is updated, the shuttle refreshes, but the selected employees are not load in the right side of the shuttle.

  I tried to divide the dynamic action of the number of the ticket into two pieces: one to select the site and the other to select the selected employees.  In the hope that the dynamic actions would be the fire of the order of the site, refresh the shuttle and update the selected employees. But I don't always get the right side of the shuttle, populated.  I tried the process a few times with debug and dynamic actions do not always work in the right order, and when they do, the right is not be filled.

  I know that the right side of the shuttle can be loaded, but the dynamic action on the ticket number also retrieves the values for another shuttle this shuttle is based on a static select statement.

  Any ideas on how to get the right side of the shuttle completed when the selection is based on a LOV cascading?

  Another idea, is possible to launch a dynamic action when the left side of the shuttle is filled.  Then I could store employees selected in a temporary variable and load them after the shuttle is filled.

  Thank you

  Ray Gillfillan

  I solved my problem.

  I added a variable temp for action dynamic ticket number for the value to be set on the right side of the shuttle.  I also added a refreshment after a dynamic action on the shuttle to set the value of the right side of the temp variable.

  Ray

• Unable to decode the rights thrown error message?

  We strive encrypt a .flv file using Adobe Flash Access SDK in a project using Netbeans IDE (see 6.8). We use the example of class provided by Adobe Flash Access library to do the encryption. The most funny thing is whenever we have turn this class within the web project, the file is coded correctly and the appropriate metadata files are generated.

  However, after that we generate JAXB bindings from a .xsd file and try to run the code example, we get the following exception. Please note that we use the versions of the following software

  JAXB in NetBeans 6.8: -.

  Created by: 1.5.0_12 - b04 (Sun Microsystems Inc.)

  Specification-title: Java Architecture for XML Binding

  Specification-Version: 2.2

  Specification-vendor: Sun Microsystems, Inc.

  Extension name: javax.xml.bind

  JAXB of Adobe Flash Access 2.0 SDK: -.

  Implementation-Version: 1.0.1

  Specification-title: Java Architecture for XML Binding

  Specification-Version: 1.0

  Implementation-title: JAXB reference Implementation

  Implementation-Vendor-Id: com.sun

  Implementation-vendor: Sun Microsystems, Inc.

  Specification-vendor: Sun Microsystems, Inc.

  JAVA: 6

  JAVA EE: 6

  NET Beans: 6.8

  = EXCEPTION RAISING =.

  August 19, 2010 14:20:01, com.adobe.flashaccess.core.logging.Logger error
  SEVERE: Unable to decode the rights: null
  com.adobe.flashaccess.sdk.util.EncodingException: unable to decode the rights
  at com.adobe.flashaccess.sdk.policy.PolicyRightHelper.parsePDRL (PolicyRi ghtHelper.java:147)
  com.adobe.flashaccess.sdk.policy.PolicyRightHelper.parseRights (policy RightHelper.java:95)
  at com.adobe.flashaccess.sdk.policy.Policy.parsePolicy(Policy.java:610)
  to com.adobe.flashaccess.sdk.policy.Policy. < init > (Policy.java:158)
  at com.packager.AdobeDRMPackager.loadPolicy(AdobeDRMPackager.java:208)
  at com.packager.AdobeDRMPackager.processModel(AdobeDRMPackager.java:116)
  at com.packager.AdobeDRMPackager.main(AdobeDRMPackager.java:282)
  Exception in thread "main" com.adobe.flashaccess.sdk.util.EncodingException: unable to decode the rights
  at com.adobe.flashaccess.sdk.policy.PolicyRightHelper.parsePDRL (PolicyRi ghtHelper.java:147)
  com.adobe.flashaccess.sdk.policy.PolicyRightHelper.parseRights (policy RightHelper.java:95)
  at com.adobe.flashaccess.sdk.policy.Policy.parsePolicy(Policy.java:610)
  to com.adobe.flashaccess.sdk.policy.Policy. < init > (Policy.java:158)
  at com.packager.AdobeDRMPackager.loadPolicy(AdobeDRMPackager.java:208)
  at com.packager.AdobeDRMPackager.processModel(AdobeDRMPackager.java:116)
  at com.packager.AdobeDRMPackager.main(AdobeDRMPackager.java:282)
  Result of Java: 1

  Can anyone shed a light on what is perhaps the question?

  Thanks in advance

  LoveTQ

  Hi LoveTQ,

  To have a very brief overview first, we use Apache Commons Logging as the recording interface for our SDK (and other papers). The implementation/provider logging concrete under this interface is specified in the file commons - logging.properties that should be present on the Java class path. The setting for the logging level depends on the underlying implementation. Customers can use an implementation of the logging of their choice, with the SDK.

  If you use the implementation of Log4j (which is what we use in some of the other components of Flash Access), you can change the logging level in the corresponding log4j.xml configuration file. These details, if you wish, are provided under this link - http://commons.apache.org/logging/guide.html#Configuring%20Log4J.

  If you decide to use another application of logging, you will need to consult the appropriate documentation.

  The only exception to all of this, for the current version, is with the access server out-of-box Flash for protected streaming, in which the log level is changed via the flashaccess configuration file - global .xml. For more details, you can see its documentation on page 45 of the content protection guide (http://help.adobe.com/en_US/flashaccess/2.0/protecting_content.pdf).

  I hope this helps.

  Safdar