Figure numbers not in service - cannot be changed

Similar Questions

• Reached at the number on apple ID account is not fair and cannot be changed

  Hi, I have 3 phones and I used the same apple ID for all wrong. I managed to have an ID separate apple for each phone to try to separate things now. Unfortunately, there are some residual mix ups. One of them being the accessible number on my account ID that I had put in place for the phone has phone number B. I tried to change my phone has and it happens with saying "this phone number" phone B which is not fair. I'm trying to change the number "reachable to the ' phone A real number A.

  Any ideas / advice would be greatly appreciated. Thank you in advance!

  Try to turn OFF iMessages & FaceTime then remove the SIM card and then insert it Again iMessages & installation & FaceTime of Apple ID using cellular data

• 6.22.81.105 - group images do not load and cannot be changed.

  I installed 6.22.81.105 and it works fine - everything should work, works, except for one thing - don't charge for group photos, and even if I try to change myself, they do not appear for me or other users from other users can see them, but they do not load on my computer. I tried disabling my firewall, restart, reinstall and have even used a packet sniffer to see if something could not load without any reason, but it seems that it is simply not request anything initially, for no apparent reason.

  It has not been announced anywhere, but in the version 6.22 of Skype, it is now possible to change the profile for new cloud-based Group catspictures. The P2P old cats are still displayed without profile photos.

  Exactly the opposite is now the case with the previous version of 6.21.

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.

• Cannot make changes to the properties of the taskbar - does not

  Win XP Home-SP3-SafetySkan and DiskRepair were unnecessary run-help.

  Cannot make changes in task bar accessories. Most irritating: can't keep its shortcut icon on the bar. Not preloaded operating system so no manual. Thanks in advance.

  Hello

  • What were the changes made before the issue started?

  You can view these methods:

  Method 1:

  I suggest you to check the question in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2:

  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• Windows service install is not accessible and cannot be installed correctly.

  WINDOWS SERVICE INSTALL IS NOT ACCESSIBLE AND CANNOT BE INSTALLED CORRECTLY.

  Suddenly, I can't download my Quicken bank account information or anywhere else.  I first was getting the message THAT WINDOWS INSTALLER can NOT ACCESS THE SERVICE DO MAY NOT BE INSTALLED CORRECTLY. Now he wants me to search the Web, but I can't find any help you do not have to buy.  It is a new laptop with Windows 7.  Please HELP I've worked on this all day!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows backup error the service cannot be started, either because it is disabled or because it has not enabled 0 x 80070422

  I tried to understand this and have failed so far.

  Using the Control Panel, system and security, backup and recovery. Click the backup set,

  Pop up - select where you want to save your backup. I select the 4 TB drive that I just

  put in my system (and the recommended player). I click Next, and then select Allow me

  Choose and click Next. The next window - what you want to backup? Data files are already

  selected by default, and then I select the disc Local (c), include an image of disk system: EFI system

  (C) partition is already checked by default. Click on next, the next window - see your back to top

  settings, click on save settings and run the backup and that's what I have.

  The service cannot be started, either because it is disabled or because it has not enabled

  associated devices, (0 x 80070422

  I checked the services which apply to Windows backup and tried the auto configuration instead of

  Manual.

  I tried this search on the Internet and so far all I've found is not

  fixing the problem.

  Original title: set up backup Windows does not.

  Thank you for your help. I fixed the problem I had. It was caused by the settings in the

  Samsung magician optimization settings. Recently, I had put in a Samsung SSD EVO 850.

• Please note that the quote/cart has already placed an order and cannot be changed.

  Hi all

  Currently, we are trying to create an order istore and doing so when you add an item to the cart, shopping cart throws the error "Please note that the quote/cart has already placed an order and cannot be changed. What happens with a single user. We created an order earlier and this was achieved convert quote to order. Now when we created a new this error pops up. Also, there is no record in the IBE_ACTIVE_QUOTES_ALL table for this user for any active carts.  Please provide suggestions. I cleared the cache bounced the server istore and disconnected and connected and always the question already exists.

  Thank you

  Hello

  Please confirm that there is no basket of assets

  Confirm the data in ibe_active_quotes_all

  SQL > select active_quote_id, order_header_id, quote_header_id

  of ibe_active_quotes_all

  where party_id = & partyid

  and cust_account_id = & cust_id;

  To get values-
  Select customer_id from fnd_user where user_name = ==> set to 1
  Select person_party_id in the fnd_user where user_name =
  Select object_id from hz_relationship where subject_id =
  Select cust_account_id in the hz_cust_accounts where party_id = ==> value 2

  Confirm the data are synchronized in citing it table aso_quote_headers_all:

  SQL > select order_id aso_quote_headers_all

  where quote_header_id = & from above;

  If a basket of assets is found, you can remove-
  delete from ibe_active_quotes_all where party_id = and = cust_account_id and record_type = "shopping CART";
  > This will remove the active cart of the user, so you can proceed to the next cart.
  Reference for the discussion:
  How to remove Active iStore basket of a user (Doc ID 1261926.1)
  Thank you
  Debbie

• iStore error: Please note that the quote/cart has already placed an order and cannot be changed.

  Hi all

  Please help with error - "Please note that the quote/cart has already placed an order and cannot be changed."

  I am able to search for items in the store but when add to cart we get error "Please take note that the cart/quote has already been placed an order and cannot be changed."

  We do not process returns in our iStore.

  Thank you

  Subin.

  Okay, okay...

  See if you have any folder for that user in the IBE_ACTIVE_QUOTES_ALL table, if so delete it and try again...

  IBE_ACTIVE_QUOTES_ALL is used to store the current active cart of a user.

  The user is identified by party_id cust_account_id reference HZ_PARTIES and the active carriage is identified by the quote_header_id referri

• [Depressed] Due to the cannot update/change my card wireless dv8000t

  My HP pavilion dv8000t Intel 3945abg pci-e wireless card died a week ago and I want to upgrade to Intel5300agn because it supports Wireless-N much faster than G.

  However, I got a 104 error messeage: unsupported material and never boot into windows.

  I checked the internet and understood this limited HP than dv8000t support Intel3945 abg only bios.

  I don't know the reason behind this, however, whatever the reason, it is totally unacceptable.

  You cannot update/change the brand of the wifi card, it's the most ridiculous thing that I have experienced in my life of the computer.

  I'm a fan of HP and I always recommend my fds HP and they trust in me and buy HP laptops that I am the head of the spirit of my circle.

  Unfortunately, after this time, I can't buy any laptop of HP unless HP change their policy which is to give the user benefits from upgrading their equipment.

  HP must indicate the parts that customers of can/Can ' t make clear in their brochure. I wouldn't buy this dv8000t if I know that I can not update/change my wireless card.

  One more thing, it is that the total customer care serivces is crap.

  Sharon of the team don't even know not dv8000t is intel based from the model number. I must give a conference to tell him how HP named their laptops.

  dv8000 (T), T for intel cpu dv8000 (Z), Z is AMD processor-based. I really doubt on the quality of the knowledge of their own products customer service team.

  A frustrated customer.

  You can also use usb adaptors as well for the wireless, it doesn't have to be an internal card. But you can be upset by a manufacturer to support only the card with which he delivered. These aren't desktop computers.