File cannot be recovered during the reinstallation

Similar Questions

• How to lock "Write to file measure VI" during the execution of the request for this file cannot be opened during execution.

  Hello

  I have an application where I am external hardware data acquisition and save it in a file using "Write to measure file VI.

  During the application run on time; When the user opens ".» LVM text file "; abendons-saving application of the data obtained in the prescribed file but continues to demand on external hardware data acquisition. When I stop the application; an error message is poped indicating that an error has occurred due to open running.

  My question is: How can I block this file in which the data is saved, so that the user cannot open it during the execution of the application?

  Looking forward for your kind suggestions in this regard.

  Kind regards

  Jamal

  Hi Jamal,.

  It has been said many times before: use simple simple file features!

  

  Opening a file with a default access "read/write" will disable access to this file to other programs!

• iCloud backup after iOS 10 - some files were not available during the last backup

  HI - we are a company with about 350 users of iPhone and iPad.  I put this in the iCloud in the community section, but I've seen other users have the same problem in this section, so I thought I would add here.

  In order to stop users add their own e-mail accounts on the iPhone that lock us the device through restrictions - deactivation of the accounts section.  It stops and then access the iTunes settings.  In the test of iOS 10.0.1, we have one of the devices (a 16 GB 5 s, who had been a backup at 7:20 that morning), improved 9.3.2 that went well with no obvious problems, then, after a few days to leave the handset to the function, we have lifted the restriction and the backup on iCloud to find any backup not occurred since the upgrade and a message 'some files were not available during the last. backup"in its place.

  If all our staff upgrade their phones (we gave says not yet) then the backups look like they stop.  It is easy to fix, as a manual backup, will complete the process, but you have to remove the restriction to do this.

  We tested on iPhone 5, 5 s, air iPad iOS 8 to 9.3.5 and all have this problem.

  I have exactly the same problem, 16 GB iPhone 5s as well. I plan on raising at my Genius Bar appointment today.

• When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed)

  original title: codec

  When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed) how can I fix it?

  Install the codec.  Really.

  Something like GSpot to understand that one.

• codec error, I get the message (file cannot be imported because the codec required not installed) how to install appropriate codec?

  original title: codec

  I have windows vista Home premium.  I get the message (file cannot be imported because the codec required not installed) how do we install the right codec

  ... How to install appropriate codec

  There is an excellent set of codecs available here.

• Files without a NAME during the Flashback Database

  Hi all

  Why, in flashback, database, retrieve a tablespace has dropped the datafile (s) consisting of within table get renamed to UNNAMEDnnn? I was going through some examples on the internet but did not find any concrete reason as to why this happens during the flashback recovery. If the tablespace can be recreated during the process, why not data files that compose?

  Could someone help me please in my understanding.

  Thank you.

  Prithwish Adhikari wrote:

  Hello

  I was talking about the flashback database to retrieve a tablespace has fallen. Please find below the link

  http://www.DBA-Oracle.com/t_rman_159_restore_dropped_tablespace.htm

  My question is

  "

  flashback

  database to the SNA 460217.

  database of flashback to the SNA 460217

  *

  ERROR on line 1:

  ORA-38795: WARNING: flashback has managed but open resetlogs would get error

  below

  ORA-01245: offline file 5 will be lost if resetlogs is done

  ORA-01111: name for the data file 5 is unknown - rename it to the correct file

  ORA-01110: data file 5: ' / u01/oracle/product/10.2.0/db_1/dbs/UNNAMED00005'

  "

  Why, in flashback, database, the data file associated with the storage space gets renamed to unnamed?

  Thanks for the link and new info.

  The reason is the same as in these quotes from doc that I have provided. As ORA-01111 indicates the name of the actual file is unknown so Oracle creates a unique name, then stops recovery so that you can provide the name and location.

  Why, during the flashback database, retrieve a tablespace has fallen...

  This formulation and the wording of the article, is probably what is mislead you. You cannot recover a tablespace using FLASHBACK DATABASE:

  Here is the doc for FLASHBACK DATABASE

  http://docs.Oracle.com/CD/B28359_01/backup.111/b28273/rcmsynta023.htm

  Notes A Flashback Database use operation applies to the entire base. You cannot flash back, individual storage spaces. A Flashback Database operation is similar to a point-in-time data recovery (DBPITR) with RECOVER , but RMAN uses flashback logs to undo changes to a point before the time runs out or SNA

  See that second sentence? You NEED to recover the entire database and, as this quote from doc says, made it like CAMILLE by RECOVER.

  In this example, the storage space AND data files were dropped. So please check the doc to DROP TABLESPACE

  https://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9004.htm

  Oracle database deletes all metadata about the space of storage data files and all the data dictionary tempfiles in the tablespace. The database also automatically removes the operating system all data files managed by Oracle and tempfiles in the tablespace. Other data files and tempfiles are not removed from the operating system unless you specify INCLUDING CONTENTS AND DATAFILES .

  See? No additional data in the dictionary for the tablespace or data files. Real datafiles is more if they were managed by Oracle. But there MAY be data files of the operating system if you do NOT use this last clause.

  If Oracle recreates the files using unique names and then allows you to CONFIRM that the name and location should really be.

  You have a problem with that? Or just try to understand?

• During the reinstallation of XP, message "Please wait" frozen and inactive computer

  Recently, I tried to reinstall Windows XP SP2 from an installation disc that came with my computer. Before reinstallation, it was under XP SP3.

  He went through the installation process. It appeared that the installation is complete. It restarted (for the second time during the installation) and engaged in the usual Windows XP loading screen and now froze on a similar screen that displays the message "Please wait" instead of the loading bar. I waited for several hours, and the screen has not changed. The computer makes no noise and doesn't seem to be something.

  What should I do?

  Hello

  ·        You are able to boot into safe mode without any problem?

  ·        Did you do a fresh install with formatting or without formatting the hard drive?

  Method 1:

  I suggest you to disconnect all external peripheral devices that are connected on the system such as (printers, scanners, etc.) and check if you are able to boot to the desktop.

  Method 2:

  Step 1:

  I suggest to start in safe mode and check. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select the startup options safe mode and press to enter.

  If you are able to boot into safe mode without any problems then, it might be a problem with the graphics card drivers that are installed on the system. I suggest to disable the video card drivers from the start in safe mode and then try to boot to the desktop and check.

  Step 2:

  To turn off the graphics card driver, follow the steps mentioned below.

  a. click on Start menu and click Control Panel.

  b. click System and click the Hardware tab.

  c. click the Device Manager button and right-click on the graphics card driver that is present.

  d. click on uninstall and then try to boot to the desktop and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Can't find the necessary files" cannot retrieve or create the recovery disk. Help!

  I can't refresh PC or create the recovery disk. He keeps going with error message "Cannot find the necessary files" and tells me to insert the recovery media. There is no system restore point, and I've upgraded to Windows 7 Windows 8 Pro without a disc, so I can't do anything. Help! Strangely, nusrmgr.cpl disappeared, although I had seen the shortcut a few weeks ago (no, I'm not deleting it).

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Why are you trying to cool off the computer?

  2 are you facing problems with Windows 8?

  3. how many accounts is configured in the computer?

  You can scan the file system (CFS) auditor. This will replace the corrupted Windows files.

  Follow these steps:

  (a) start the desktop view.

  (b) open the command prompt, right-click in the left corner when the windowappears, and select prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  You can also try to create a new user account and check if the problem persists.

  If the problem persists, you will need the DVD to perform repair installation of Windows 8. If you download the installation of Windows 8 files, check your emails, there should be a link to download an ISO file. Download and burn the file to a DVD.

  The DVD to perform the repair.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Save a PDF file cannot be modified, losing the file HAVE changed.

  It's great that illustrator can edit PDF files and it's great that Illustrator can record on a non editable PDF. But why, for the love of sanity, I would like to save a PDF file cannot be modified, but then have the original file, currently open HAVE disappear leaving only this little pointless PDF file? I STILL want the file HAVE to remain the main current job file original. But it doesn't work.

  Or if, for some reason I can't understand, this behavior is necessary, and right, then at least it should show unequivocally that I am to modify a PDF file cannot be modified and strongly suggest to me that I might want to save an editable PDF or HAVE a file, or even do it automatically until I close the file (or Illustrator crashes as it is wont to do).

  I'm working on a file HAVE and I need to save a small file of WIP not editable for the customer display. I go to file - save as-> PDF / smaller file size / uncheck "preserve Illustrator editing capabilities". I send the PDF file to the client and continue to work and save, assuming that I'm working on the original. The file looks and behaves exactly as it did until I taped that, intuitively, I guess that is the file HAVE same, original, with the PDF file in a copy. However, when I come back the next morning, after having closed the file, only the low resolution not editable PDF file remains. The file doesn't help, and I have to redo all the work all the way back to the last time, I saved the file I saved the PDF.

  Much trouble, loss of hair, the time wasted, face Palm trees, etc.

  The thing is, I now /know/ does and I'm going out of my way to avoid it happening, but in the race at the end of the work and send commands to the client and manage multiple versions of files, it still happens. Now clearly this is my fault, but heck, Illustrator could behave much more usefully in this regard!

  Well, I must be missing something, I guess.

  I asked how "save a copy...". "is the way lasts, and you replied that you were referring to not using Save a Copy... So I re - submit that by using Save a Copy is the solution to your original problem.

  • Work in Illustrator; number of objects; several layers, live effects, etc.
  • Want a copy of WIP for the customer as you have described originally...
  • Choose file > save a copy... Format is not question could make no editable PDF, raster format, whatever...
  • Continue to work in Illustrator... under a State record which is absolutely no different than if I had never done the Save a Copy... There is no "silent dump' edit-ability or any such similar event. If I record, I save it HAVE original, or a new if the State was not saved.

• Records of files does not display during the recording of the converted web page in Internet Explorer

  I have recently installed Windows 10.  I use Acrobat Pro 10.  Now, when you convert a web page in an Acrobat document, when I click on "Save as", most of the shirts in my OneDrive folder do not appear.  This only happens during the conversion of a web page to a pdf Acrobat file.  If I save the web page converted into my office and open it from there, I can see and access all the OneDrive file records.

  Any idea what's going on here?  I tried uninstalling and reinstalling Acrobat but that did not help.  Thank you.

  Acrobat X (10) is not compatible with Windows 10.

• Cannot find record during the update on the date of

  TABLE CRAM_STG:
  

  ID     VARCHAR2(25 BYTE)
  ITEM_NO     VARCHAR2(6 BYTE)
  NOMEN     VARCHAR2(28 BYTE)
  CHGNBR     VARCHAR2(3 BYTE)
  UI     VARCHAR2(5 BYTE)
  SUPPLYACTIONCODE     VARCHAR2(2 BYTE)
  QTY     VARCHAR2(5 BYTE)
  ACCT     VARCHAR2(5 BYTE)
  SUBACCT     VARCHAR2(1 BYTE)
  REQUISITIONTYPE     VARCHAR2(1 BYTE)
  REQUISITIONDATE     DATE
  RECEIPTDATE     DATE
  PROCESSDATE     DATE
  ESTIMATEDSHIPDATE     VARCHAR2(10 BYTE)
  ZIPCODE     VARCHAR2(5 BYTE)
  CENTERCODE     VARCHAR2(1 BYTE)
  ORDRNBR     VARCHAR2(14 BYTE)

  Update:
  
  v_order_date: = to_date (CRAM_UPD_REC. ORDER_DATE, "MM/DD/YY").
  

  UPDATE CRAM_STG
      SET CRAM_STG.ORDRNBR = CRAM_UPD_REC.ORDER_NBR,
          CRAM_STG.ESTIMATEDSHIPDATE = CRAM_UPD_REC.SHIP_DATE
      WHERE CRAM_STG.acct = CRAM_UPD_REC.ACCT and 
      CRAM_STG.subacct = CRAM_UPD_REC.SUBACCOUNT and 
      CRAM_STG.item_no = CRAM_UPD_REC.ITEM_NO and 
      CRAM_STG.qty = CRAM_UPD_REC.ORDER_QTY  and  
      CRAM_STG.requisitiondate =  v_order_date   ;  

  During a select statement without the date
  

  select REQUISITIONDATE from cram_stg
  where acct = '39249' and
   ((subacct = ' ' ) OR subacct is null) and
  item_no = '131249' and 
  qty = to_number('00001','99999');
  
  OUTPUT:
  
  REQUISITIONDATE           
  ------------------------- 
  04-OCT-11        

  But my problem is when you use the date which is varchar type convert to date, it does not find the file.
  

   select REQUISITIONDATE from cram_stg
  where acct = '39249' and
   ((subacct = ' ' ) OR subacct is null) and
  item_no = '131249' and 
  qty = to_number('00001','99999') and
  requisitiondate = to_date('10/04/11', 'MM/DD/YY');
  
  REQUISITIONDATE           
  -------------------------

  mlojan wrote:
  ALTER session set nls_date_format = 'dd-mon-yyyy hh24:mi:ss ";
  change the session succeeded.

  REQUISITIONDATE
  -------------------------
  October 4, 2011 01:30:21

  Then he can easily explain why it cannot be equal to your function to_date (...) that does not include a default time (h: min: sec = 00:00:00).
  So, you can try trunc (requisitiondate) = to_date (...) instead.
  TRUNC is suppose to give up the time portion of the date up to 00:00:00.

  Nicolas.

• Maximum size of the VMDK file we can assign during the P2V?

  Hello.

  We conduct P2V for a server physical and would like to address one of the disk for P2V.

  Rather than extend the VMDK disk in the future, we would like to extend during P2V.  Given that VMDK file maximum size is 2 TB for ESXi host, we can assign 2 TB for this VMDK file OR there is a recommended maximum size to use?

  Thank you

  I have myself yet, but I guess you should be able to assign the maximum size of virtual disk, depending on the block size of the data store (for ESXi versions before the 5.x/VMFS-5). That said, I suggest that you don't assign it more than 2 032 GB in order to create snapshots for this virtual disk (see "calculates the time system required by the snapshot files" at http://kb.vmware.com/kb/1012384)

  André

• CANNOT SET VALUE DURING THE CYCLE OF THINKING

  Hi all
  
  OPA 10.4
  
  I have a global and a 1:M entity.
  I have to solve a serial No. to all the entity instances in session according to an external logic. For this I used a custom fuction that sets the value of the attribute "Serial No."
  Error thrown is "cannot SET a VALUE FOR the CYCLE of REFLECTION".
  
  (1) please Suggest a way to apply this logic.
  
  (2) INFERENCE LISTENER (IT) will be useful? Since an inference listener defines the value before and after the session, can I recover session and its data in my code to intermediate language, so I use it after the session?
  
  
  Thanks :)

  Charu Tiwari says:
  Then I would be able to use the session data in the inference for assessment listener code, if I call the Inferencing listener after the cycle of inference?

  If you use an inference, you will have access to all session data (entities, attributes, relationships) in the event listener.

  See you soon
  Frank

• Cannot create partition during the Windows installation.

  Hey

  You have a problem with the installation of Windows (10 or 8.1, same problem). I share the part Boot Camp using the tool, but once I'm in the installer that I meet a problem. I format the BOOTCAMP partition scored, but then Windows says that it cannot create a new partition.

  Some impressions diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage GB internal Drive disk1s2 648.9

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 350,5 GB disk1s4

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 764,0 GB disk2

  Logical volume on disk0s2, disk1s2

  4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9

  Fusion unencrypted drive

  List of CS

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group C4FDFFD0-7D27-4DCC-9034-2D19E7487DCD

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 769855381504 B (769,9 GB)

  Free space: 180224 B (180.2 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 648866529280 B (648,9 GB)

  |

  +-> FDD23DD2-C30E-4575-B7B1-50CBCB539D10 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical Volume 4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 763999944704 B (764,0 GB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 236978175

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  236978136 7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  Daniels-iMac: ~ danielzandian$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  You can also post the output of

  sudo TPG - vv - r see the/dev/disk1

  sudo fdisk/dev/disk1

  What is the year/model of your Mac?

• Y570: Pilot missing during the reinstallation of Windows 7

  Hi all

  I'm trying to reinstall Windows 7 on my newly acquired IdeaPad Y570, following the directives of the http://consumersupport.lenovo.com/uk/en/HintsandTips/ShowDoc.aspx?ID=12870415982811, including the execution of the RapidDriveTool (which signals success). But when I reboot and boot from my USB Windows Installation, I'm stuck during installation. He asks me to install a driver because he finds not all readers. Tries to install all the drivers in the folder pilot in support of lenovo does not help score, and switch mode compatible SATA in the BIOS did not help either. This scenario is not covered by article, so what I am doing wrong?

  Kind regards

  Hannes

  Yes, as I said I tried to install the Chipset drivers, found in the folder of the partition to support driver. The installation program installs the drivers, but said that no additional devices have been found, so I can't always choose any partition installation target.

  Ironically, I tried to use another way to install that I had just be sure and there it works. It looks like the original media was wrong. In any case, I am now. Thank you for your support.