File dl_settings.xml pending changes

Similar Questions

• What file Application.xml to change?

  Hi all

  I need to edit application.xml to change the location of support of VOD. I have the following files:

  ./opt/Adobe/FMS/conf/_defaultRoot_/_defaultVHost_/application. XML

  ./opt/adobe/fms/applications/vod/Application.xml
  ./opt/adobe/fms/applications/live/Application.xml
  ./opt/adobe/fms/samples/applications/vod/Application.xml
  ./opt/adobe/fms/samples/applications/live/Application.xml

  Which one should I change? The 1st or the 2nd?

  Thank you

  ./opt/adobe/fms/applications/vod/Application.xml

  Remember that it is specific on demand vod.

• Pending changes in the management of versions of jdev

  Hello

  I use jdev 11.1.1.7

  When I change the files. Of pending changes I don't see the files I modified.

  I am able to validate the project. It validates the changes automatically. but I do not see the modified files.

  Hello

  You must make sure that the project hasent been committed or checkedout using any other SVN client. You could have checkrd outside of Jdeveloper, but if your colleague uses turtle rather the jdeveloper one, then you ready have this kind of problems.

  I recommend you try, version, a test project and see if you can see pending changes correctly. If you can, then is a problem with your project and not with JDev.

  Concerning

• Save the class file using XML

  Hi-

  I made a new class for LabVIEW, and I try to save a file using XML. Attached pictures show how to create the file and how I read it, and I get the error message. I tried a variety of different methods and nothing worked so far. I was wondering if anyone had any advice or examples to save a class to file via XML.

  In the meantime, I'll use the method described here:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=215511&query.ID=672786#M215511

  but I would prefer XML for more usability later down the line.

  I also thought just not related to the group all the data structure, recording via XML and then just group it upward and writing to an instance of the class. This seems to be more work that needs to be necessary and should be redone every time I have change the class.

  Probably, it goes without saying that I am fairly new to LabVIEW so I hope this isn't a stupid error that is obvious to the vet...

  Thanks in advance,
  Nate

  First - Sorry for wany waste of time to download the wrong screenshot in the op.

  Second - I solved it! I was about to send a screenshot of my hierarchy for you to take a look at, but that made me think. I re-arranged my hierarchy; This solves the problem.

  Now, for all those who had the same problem (Error 1527):

  The first screenshot is my original project hierarchy, which did not work.

  The second is my hierarchy updated the project that solved the problem.

  Thanks for your help!

• file index.xml missing existing password protected worksheet the worksheet

  file index.xml missing existing password protected worksheet the worksheet

  What spreadsheet, Excel,...? What model computer/year? What if any error message? Did you create the spreadsheet? Have you checked with the developer of the worksheet for help, Microsoft for example?

  Writing an effective question of communities of Apple Support

• When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  Hi Scarface0721,

  Welcome to Microsoft Answers Forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) game in which you try to read?

  (b) have you been able to install and play the game before?

  (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

  Method 1:
  Try to install and play the game in a different computer.

  Method 2:
  Try another disc and verify if you are able to install the game.

  Method 3:
  You can also post your request in the following forums site.

  http://forums.gamesforwindows.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Masses of jpeg files, unwanted in "recently changed".

  file can not find hereMasses

  Masses of jpeg files, unwanted in "recently changed".  Impossible to delete, get the message that they are no longer at this location.  Where did they come from?  How can I get rid of them?

  Do you mean recent items on the Start Menu, or do you mean C:\Users\\Recent?  Are these these files recognize you or are they all strange to you?  I don't know where they came from-maybe there was a mistake in the Vista program or maybe they came to the temporary internet files or it could be a variety of reasons - it is very difficult to say.  It would be useful to know if you all recognize.

  First of all, I would make sure that the original files are all where they are supposed to be and do not have somehow been transferred.

  Try using one of the following free products to remove the files.  Unlocker to:http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  After back if none of these programs does not work to remove the files either.

  I do one and then confirm that it has been also removed from its normal location.  Then try a couple just to be safe.  Once you are sure that the originals are not as well removed, then you can delete everything else.  If the originals ARE deleted, we have a different problem.  Post back and we'll try to solve it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  I downloaded the game codes and try to build games using these codes, but I had only

  data folder

  image folder

  js file with .js files

  file .html

  main.js file

  In this case, how build/package web app /html5 app if no config .xml given?

  You will need create your own file config.xml. There are samples and documentation on each of the items on our microsite here:
  https://developer.BlackBerry.com/HTML5/documentation/gold/working_with_config_xml_file_1866970_11.ht...

  Note that all the elements in the samples are not necessary. For each piece, make sure that you actually need in the config.xml file. For example, most web game conversions will not need elements (using the old SDK) since they make use of BlackBerry-specific APIs.

• Unable to parse the file config.xml - bad xml structure

  I'm doing a simple application for blackberry phones.  I used the code on the site of dev on creating your first application.

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "1.0.0.0" >
    DevBlog
    BlackBerry Developer Blog
   
  email = '[email protected]' > John Doe
   
    http://devBlog.BlackBerry.com"/ >
   
  

  I edited it for the site we want to and other details as follows:

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "1.0.0.0" >
   
   DeVryUniversity 
   DeVry University Library 
   
  email ="[email protected]" > Danny coats "
    
   http://library.DeVry.edu/cgi-bin/Pwebrecon.cgi?DB=local&page=first"/ >
   
  

  It gives me the following error when I compile it:

  C:\Program Research In Motion\BlackBerry WebWorks Packager > bbwp "C:\Users\".
  Danny Coats\workspace\applications\DeVryLibrary\DeVryLibrary.zip.
  [INFO]                  Parsing of the command line options
  [INFO]                  Bbwp.properties analysis
  [INFO]                  Validation of archive application
  [INFO]                  The analysis of config.xml
  [ERROR]                 Impossible to analyze the file config.xml - bad structure XML

  I use Windows 7 Professional and the latest version of the SDK of Blackberry WebWorks.  I find nothing in the community for this to solve.

  Any suggestions will be greatly appreciated.

  I had the same error when you try your config.
  So, I try to analyse.
  I found the error is in the value of the content item, you must:

  http://library.DeVry.edu/cgi-bin/Pwebrecon.cgi?DB=local&page=first

  and should be:

  http://library.DeVry.edu/cgi-bin/Pwebrecon.cgi?DB=local & page = First

  If the special characters in the URL must be converted to their html entities.

• File attributes can be changed from read-only on a global scale?

  I just finished using Easy Transfer from XP on a Win7 machine on another PC and find that almost ALL of my documents, spreadsheets and Access databases has been changed read-only.  I changed a couple of them to full access through the Properties menu, etc. and many prefer to be able to do on a global scale as I speak of hundreds of files that have been changed by this transfer.

  Is there a way to do this on all my files on my hard drive?

  Ronnie,

  It just seemed to me that all I really need to do is to find a way to change MY profile for equal to that of the admin. I did it just for a few files and these files are no longer read-only... !  I hesitate to change my system to an ADMIN login for security reasons.   I also changed the attributes of the lowest subfolder, then the above it and then I can open all of the files in these folders in r/w mode...

  So, is it possible to automate change the attributes of all files folder and subfolders?

  Fred615

  Hi Fred

  Yes, you must be connected to a Director profile.

  If all these files that you want to remove the read-only attribute on the D: drive, perform the following steps. Use these commands exactly as written, including spaces.

  1. open the elevated command prompt by using the profile administrator.

  The location should display C:\Windows\system32 >

  2 type cd\

  Press ENTER

  The location should now show C:\ >

  3. Type  D:

  Press ENTER

  4 location should now show D:\ >

  5 type attrib - r *. * /s /d

  Press ENTER

  This should remove the read-only attribute of all folders and files on that drive.

  Test and let us know the results.

  Concerning

• Configure the file snmp.xml on 5.5 ESXi via PowerShell and PowerCLI

  Hello:

  I wonder if there is a way to configure the file snmp.xml on the ESXi host (/ etc/vmware/snmp.xml) using the script? I have root password and you want to be able to day/edit this file remotely...

  Thank you very much!

  To use the Set-VMHostSnmp cmdlet you must be directly connected to the ESXi host. The following example will connect to an ESXi host named ESX01 and SNMP sets active and a community example of community read-only (example 1 of using Set-VMHostSnmp):

  SE connect-VIServer ESX01

  $vmhostSNMP = get-VMHostSNMP

  Game-VMHostSNMP $vmhostSNMP - active: $true - ReadOnlyCommunity example 'Community '.

• Hi, back back can check files you opened with "recent files"? With my current setup, I can only see the last 10 files. Can I change the setting to display the last 20 files for example? Thank you

  Hi, back back can check files you opened with "recent files"? With my current setup, I can only see the last 10 files. Can I change the setting to display the last 20 files for example? Thank you

  File management preferences is where you can change the number. I don't know the maximum.

• The resource bundle for file customcatalog.xml file path

  Hello
  
  I have code like this in my file customcatalog.xml where can I find this file resourceBundle
  
  < table name = "vzw_product" type = "auxiliary" id-column-name = 'product_id' >
  < property name = "storePickupEligibleFlag" = "boolean" column name = data type resources in category "store_pickup_eligible_flag" = "categoryBasics."
  Display-name-resource = "storePickupEligibleFlag" required = "true" default = "false" >
  < attribute name = "resourceBundle" value = "some.store.catalog.CustomCatalogTemplateResources" / > "
  < attribute name = "propertySortPriority" value = "-10" / >
  < / property >

  for example:

  Display-name-resource = "storePickupEligibleFlag".

  in your some.store.catalog.CustomCatalogTemplateResources.properties

  you will have:

  storePickupEligibleFlag = is store pickup eligible?

  So suppose that in BCC UI will show you what somewhere for BCC to configure user, so instead of display storePickupEligibleFlag you can show of store truck eligible? , which will look more significant.

  ```
  Abdelali

• I need to create a PDF from InDesign file that people can change in Reader or Acrobat

  I need to create a PDF from InDesign file that people can change (for example, change a name of 'John' to 'Johnny') of Adobe Reader or Adobe Acrobat. I already looked at forms, but they do not keep your police, faces and sizes colors and just do everything is selected as a form of black text, 12pt, Times New Roman.

  Can anyone here help me?

  Vincent,

  If you use Acrobat pro, build your .pdf file, and then save it as (french version):

  

  ... so that everyone using Acrobat Reader (or Pro, of course) can change the file .pdf (with restrictions), add comments...

  If you want to try to 'protect' your .pdf file, you can try with this (in the menu 'Preferences' (french version)):

  

• Create the file prov.xml of origin for Provisioning Toolkit Enterprise?

  How to create the file prov.xml of origin to be used with the Setup Toolkit Enterprise? This is intended to resovle the question with serialization of deployments of Creative Enterprise Cloud break during imaging. Several people reported trying to reserializing with PTE.

  Hi msdavidson,

  Follow this KB for Adobe Provisioning Toolkit article.

  http://helpx.Adobe.com/creative-cloud/Packager/Provisioning-Toolkit-enterprise.html

  Hope it meets your request.

  Kind regards

  Abhijit