File open problems removal

Similar Questions

• Also cannot open file Association problem: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe

  I have a program with: file Association problems: also failed to open: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe.

  I put security update, Internet XP but still the problem!

  Hi StanleyMcDowell,
   
  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
   

  Follow the steps listed in the article below and check if the problem is resolved.

  Cannot find the Rundll32.exe file when you open Control Panel

• Hi my problem is that I have that I've changed an exe file open with program steam

  the thing that starts when you press a program or what ever. like when I press on the internet Explorer it opens steam. Hi my problem is that I have that I've changed an exe file open with program to steam and now all my things on windows 7 opens steam and I donth know how back open by default program of you I can start the program normally.  And I tried to go to control panel and change the default programs, but it won't change anything. Please help me

  Hello

  Try a system restore: http://support.microsoft.com/kb/936212

  Good luck $

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.

• Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

  Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

  For troubleshooting, you can disable the Protected Mode (https://helpx.adobe.com/reader/using/protected-mode-windows.html#id_94783) and see if that solves the problem. If the problem persists, please re-enable the Protected Mode to improve safety.

  Let us know how it goes.

• "File > open recent" does not work.    Second problem: impossible to drag individual files or folders, from one place to the other.

  I recently installed Lightroom 6 (stand-alone version).  I have two separate issues: firstly the "file > open recent" does not work.  The cottage my last files but when I click on one of them, nothing happens (don't close the existing catalog, nothing new opens).

  Second problem: I can't drag individual files or folders, from one place to another within the section "Files" from the library.  I did this on a regular basis with older versions of LR so I know how it's done - it does everything just not in this new version.

  Thank you

  Chris

  I think that a Mac person will have to answer your question, I do not use Mac computers.

• I have can´t initialize photoshop for this reason could not load actions because an unexpected end of file was encountered. "Could not initialize Photoshop because the preferences file was invalid (removed)" How can I solve this problem?

  I have can´t initialize photoshop for this reason could not load actions because an unexpected end of file was encountered. "Could not initialize Photoshop because the preferences file was invalid (removed)" How can I solve this problem?

  I have a MacBook Pro.

  App - Adobe Creative suite 5.5

  The only application that initialize does´t is photoshop

  Solve the problem

  FAQ: How to reset my preferences?

  Thank you Jeffrey Tranberry

• Error message - FILE OPEN ERROR 5

  Get a box -' file error open 5 "once I click it, it comes at the time when I try ot open a file, but it does'nt seem to touch anything. Anyonee know what it is and how to fix it?

  Hi dangilorma,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the question with the error message - FILE OPEN ERROR 5

  Before you start the troubleshooting steps, I need the information required.

  Did you change to the computer?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

• Why can't I open Add/Remove?

  I have win7 pro. I tried to open Add/Remove and I get dll control. Help

  If you want to get your system working again, you must stop shorten your responses with point point point (dots) and reply with the exact error message you see not paraphrase, no point of dot dot, not etc.  Remember that we do not understand what you see.

  What is your version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If the system works, what do you think might have changed since the last time it did not work properly?

  For example, you see this kind of thing:

  C:\Windows\system32\rundll32.exe Application not found.

  or this:

  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Or you see something else?

  Do your work Panel options or they all seem to have the same problem?

• Cannot open Add/Remove windows components.

  received message after trying to open Add/Remove windows

  components,

  Msdtcstp.dll Setup library could not be loaded, or function OcEntry could not be found.

  Contact your system administrator. The specific error code is 0x7e.

  Using Add/Remove programs and Add/Remove Windows components, you see this message:
  Msdtcstp.dll library installation could not be loaded, the function that ocentry could not be found.
  Contact your system administrator.  The specific error code is 0x7e.
  Msdtcstp.dll file is missing or damaged, your system path variable is incorrect, or your system is afflicted with malicious software (or all of the above).
  Using Windows Explorer, navigate and see if the file is present.
  Msdtcstp.dll file must be in this folder:
  c:\windows\system32\setup
  Since this is one of the 3498 files which is covered by the Windows File Protection, if ever it has been installed and works, it must never be 'disappeared' unless something is wrong, but you can just go ahead and replace it with a known good copy and then work on potential problems.
  You can search your system to get copies of msdtcstp.dll and copy to the appropriate folder to replace the missing or suspicious file.  You must replace the file if it is missing, or overwrite the file afflicted, if it's suspicious.
  There should be a copy msdtcstp.dll file in this folder:
  c:\Windows\System32\dllcache
  Just copy c:\windows\system32\dllcache\msdtcstp.dll and paste it into the c:\windows\system32\setup folder to replace.
  Answered in the affirmative if invited to replace the existing file.
  Test your system now.
  If you can not find the file and have a bootable installation CD authentic XP installed and that the CD-ROM is drive X, expand the file from the CD-ROM i386 folder in your c:\windows\system32\setup folder by entering this command from a command prompt window:
  Expand x:\i386\msdtcstp.dl_ c:\windows\system32\setup\msdtcstp.dll
  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been expanded.
  Test your system now.
  Please report your results.
  Your system may also be affected by malware, so follow your resolution with this:
  Download, install, update and do a full scan with these malware free
  detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  The scans by operating clean, then to solve any problems.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Applications crash when go to file/open

  The problem started with Office 2010. Go to file/open and crashes the application. Excel has stopped working, searching online for a solution, or close the program. The issue has been expanded. I can't attach a file to my eMail. The application crashes. Same thing is happening on file save as...

  I can open a file from the Explorer. Double-click a file and all is well. File/save the works.

  The problem can be solved by deleting the user and re-create it. But it doesn't take long to make the problem reappear.

  I was not able to identify a specific activity that triggers the question.

  Look forward to a resolution.

  Read some articles. None really applied. MS FixIt program will not work wit Win7.

  I downloaded Revo Uninstaller. removed from Google Desktop, Google talk, Google Apps, a couple of FTP programs, which related to the Windows Explorer. I don't know which of these was interfering, but the problem has been resolved.

  I'll probably reinstall the stuff Google and see if they were the culprit. I suspect that the FTP program is more to blame. It works with XP. But once installed does not appear in the Explorer window. When I have the time.

• Error with deleting the PDF file opened in preview only pane on the shared network drives

  I have a problem within Windows Explorer, I file open with say dozens of PDFs I have the preview pane open so I can tell what was on the pdf file selected without fully open. After you have determined whether I need it or not, I'd go for delete the file. However, with the file selected and preview pane, you can not delete the file gives an error message saying: the file is already open and cannot be deleted.

  I found that this happens on users with Windows 8.1 and Windows 10 machines at my place of work with different versions of Adobe Reader and Acrobat. Main versions being Acrobat 9-10, drive DC 15. Also only on the product on shared network drives, local hard drives are not the issue.

  Also, I installed another PDF reader and do not have the same problem if I put it in the default PDF Viewer. Leads me to believe that the problem is with the Adobe programs and non-Windows. I want to continue to use Adobe since I have a lot of licenses of Acrobat. Turn off the preview pane is not an option for my end users, since the amount of PDF files that they go through in a day is quite high.

  Please notify.

  I'm sorry. I'm all out of suggestions. There may be others somewhere that I saw but patches are usually

  1 turn off the preview pane

  2. use shift-delete

  3. remove the drive and use another pdf reader

  Seems that MS and Adobe have a hard stop at this time. And as I mentioned earlier, we had this problem on our drives to network with other files. Even the products Ms.

• EPA 11, in an ongoing project (45 min. of material), expert opinion, active project Panel is empty!, if I Add Media to my project Panel files open but it is empty. This has happened with no cure 2 days ago. Yesterday it worked fine. Today is not w

  EPA 11, in an ongoing project (45 min. of material), expert opinion, active project Panel is empty!, if I Add Media to my project Panel files open but it is empty. This has happened with no cure 2 days ago. Yesterday it worked fine. Today, it does not work. I closed and then open the program several times now without success. Active project Panel is non-existent (empty so that I can"move my project.) Help, please!

  hankholmes

  What operating system is involved?

  If Windows 7, 8, 8.1, or 10, please remove the Adobe Premiere elements prefs file.

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  11.0

  and in the 11.0 folder is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the entire 11.0 the folder in which the Adobe Premiere elements Prefs file exists. Don't forget to work with folder Option show hidden files, folders and disks enabled so that you can see the full quoted path.

  What is the duration of your project, when the problem is? You have the same problem if you open a new project? Where are your stored source media, and do you get coloured poster of the Offline Media in the open project (in thumbnails active project or in the content of the timeline)?

  For any question or need clarification, please ask.

  Thank you.

  RTA

• ID of the file open causes freeze

  Is anyone having this problem? I opened the last update of CC2015 of ID and it opens VERY slowly. Then go to the file open causes a 2-5 minute beachball on my mac pro book.

  I did all Adobe offers troubleshooting and including deactivation of all additional policies, remove the suitcase entirely plugin from all adobe products and still get the dreaded beachball.

  I went back to the previous version of ID and it works like a charm.

  Please help if you know something about this problem.

  2nd question is: has that it's gotten past the loop of the Adobe diagnostic process. I have no way to contact their technical support. Online, it keeps looping to describe the product/problem etc. Really annoying and I wonder what I have to pay for.

  you have trashed the prefs yet? See replace your preferences

• Major file Corruption problem...

  Last week, I suddenly have a file corruption problem that's what I'm trying to destroy. He showed all first to the top when I converted a 16-bit file to 8-bit, but it's now the case if I add a layer and apply the high pass filter or add some details of shadow & Highlight, then the layers started almost "dissolve" and become more transparent... or they take on transparency of block type. I enclose some photos that show the sort of thing that happens...

  It's a fairly simple picture with 5 layers of distinct images. When I added a layer and applied the high pass, he corrupted the background layer to give me this...

  

  You can see that the icon in the Palace of layers shows clearly the corrupt background layer. There is also a little showing on the icon layer to Hi...

  

  Next is a much bigger (almost 2 GB) file with tons of layers that went well...

  

  .. but when the high pass layer is isolated you can discern the corruption...

  

  Shortly after taking these screenshots, the rest of the layers that everything has been corrupted and all layer mask icons were checkered with rasterized transparency. Remove the affected layers and adding them back in did not help... they would just get corrupted again. Remove the damaged layers, saving the rest of file and quit smoking did not help... to open the file again and trying to add layers back would result in still more corruption. I found some success from scratch, do one or two things, save, and then quit Photoshop. Then I would duplicate the file, reopen Photoshop and do one or two things, save again, and then quit Photoshop again... repeat 100 times! Not exactly a workflow, I can live with...

  And the really messed thing, is that this is happening with CS6 and the CC version. I'm working on a MacPro 2.8 GHz Quad-Core Intel Xeon, 24 GB 1066 MHz DDR3 ECC, card ATI Radeon HD 5770 1024 on OS X 10.8.5 MB

  Any help will be welcomed with much praise!

  BT

  We'll see if it's a problem of preferences. It is very common, yet easy to fix. Use you especially when Photoshop is upward and you know that you do not alter your installation or settings.

  Hold cmd-opt-shift and run Photoshop. You will see a dialog box 'delete settings '. Answer 'Yes' and allow Photoshop to continue loading.

  Let's see if that fix it.