file replaces the control

Similar Questions

• SQL * Loader - can I specify the log file in the control file

  SQL * Loader - can I specify the log file in the control file? If so how

  Yes,

  Try sqlldr "echo $command_line_par".

  Note: ' back quotes

  Kind regards

• If I replace the control with another why DAQmx create channel once complain a false claim?

  I tried to replace the frequency by another control in the example found here complete PWM:

  http://www.NI.com/white-paper/2991/en

  However, I get the following error message:

  

  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: CO. Pulse.Freq
  Required value: 0.000000
  Valid values begin with: 22.300000e - 309
  Valid values ending with: 20.0e6

  Channel name: Dev1/ctr0

  Task name: _unnamedTask<10>

  My wiring diagram looks like this:

  

  If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

  My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

  There are two things to do.

  What I think you did now changes the scale of the handle.

  You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

  Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

  Value "Response to value out of range" Coerce to both Minimum and Maximum.

  I hope this helps.
  Let me know if you have more problems.

• Display the contents of a text file in the control of the chain without changing the format

  Hi all

  I need your help!

  Planning the content of the text report file in labview control chain of the GI.

  When I read the text file and update the chain control, alignment of text was not appropriate.

  but when I open the same text file in Notepad, alignment looks good.

  How to solve this problem of text alignment?

  

  Gramy

  You experience the same problem before.

  Just use a .net textbox control to display text, instead of the string of LabVIEW.

  There is NO need to re - format the string.

• How to write data from the INI file for the control of the ring

  Hai,

  I need to write the data read from the INI file to a control of the RING. Doing this operation using variants I get the error.

  I will be happy if someone help me. I have attached the file special INI and VI.

  
  

• ' C:\WINDOWS\SYSTEM32\RUNDLL32. EXE'getting this message when trying to open files and the control panel.

  This is the message I get when trying to open a file or trying to access the control panel

  Hi NANCYPERRY,

  See the article after some troubleshooting:

  http://support.Microsoft.com/kb/812340

  I hope this helps!

• Deleted data file update the control file?

  Hello!
  
  I deleted a file from data in a tablespace. It was done on purpose because I have no more need. Unfortunately
  I have not updated the database control file, now I get an error message:
  
  ORA-01157: impossible to identify or to lock the 202 data file - see DBWR trace file
  ORA-01110: data file 202: "D:\ORACLE\PRODUCT\10.2.0\ORADATA\MINOTAUR\TMP_01.DBF."
  
  How update the control file to get rid of this error?
  
  I use Windows and exit DB 10.2.0.2.
  
  Thank you very much for your help!
  
  Christian

  I think that I made a mistake of reading here.
  Looks like you have deleted a TMP file.

  You then have to join v$ tablespace with v$ tempfile in the statement.

  It's a 10 G (or higher) database?

  Try to drop the tablespace that belongs to this data file, otherwise recreate the controlfile (needs database is offline)

  HTH
  FJFranken

• Flashing batch file returns the control too fast

  Hi I have a frustrating problem with a simple batch file that I am running on a W2003 server. For simplicity, it did something like this:

  copy a b
  call runprog.exe
  If errorlevel 0 goto done
  echo "error".
  output
  : fact
  echo 'ok '.

  This has been working for a long time, suddenly and only on 1 times out of 10, while it just started running runprog.exe, control is returned in the batch file and it goes to the error condition. On the other 9 times of 10, she does not return control until runprog.exe has finished (as expected).
  I reloaded runprog and tried a new copy of c:\windows\system32\cmd.exe. I also tried runprog.exe without the call - the same results.

  My conclusion is that something underlying in windows is damaged and he needs fixing with SFC or a recharge, but grateful for any ideas who would not so much here

  Thank you very much

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919.aspx

  Hope this information is useful.

• How to create a binding of the program file in the control panel of binding together?

  I get this message when I open a FLV file this file does not have a program with her association to perform this action. Create an association in the set Associations control panel

  It has to do with media decoder.

  Really, the best way is to install VLC media player.

  It's free.
  He plays almost all files formats.
  It is used and recommended Robert.

  Here is the download link:

  http://www.videolan.org/VLC/

• Create Association to a file in the control panel of the Associations St

  I use Windows Vista 6.0 and installed Office 2010 Beta and need to open an Excel file and it's what makes "this file is a program associated with it for performing this action, create an association in the Set Associations control panel. Where the set Associations control panel?

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Excel:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861099.aspx

  Forums help Excel at the link above

  They will help you with your questions Excel when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• I get emails with format PPS. I can't open them with any of the programs that I have after changing many programs in the files in the control panel.

  My Media Center or Media Player or Notepad or any other open the attached .pps

  Ray3376,

  Thank you for visiting the Microsoft answers community.

  You can try to use Microsoft Office Powerpoint. If you don't have the program, you can download Powerpoint Viewer for free here.

  I hope that helps!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Make a new file using the "Save as".

  Bit of feedback to the staff HERE...

  We use LabVIEW 8.6. and, at least in this implementation, trying to make a new VI using the command save as product a menu of choices, including none make sense to me. Sorry, but I can't say which of them will produce only makes a new file with a changed name to be refined. Trial and error product folders, but not files, replaces the original file (why would I do that, I chose save as no record) and about each result other than what I was trying to accomplish.

  May you fix this in a future release, but for 8.6, I feel that I must take a class just to save the new file.

  you're not alone...

  Have you tried "open extra copy?  This is probably what you want.  It will not copy the original and will keep the open source.

• Urgent... a file in the system registry is corrupt... Windows will not start

  Hello

  It's George who has just encountered a problem with my Sony Vaio laptop last night. My priority is to find the superior application test which is located in the desktop of the computer.

  The computer has had problems with a google redirect virus which all the analysis programs antivirus could not detect, and last night, the computer stops after a power failure and was not able to start the windows program.

  The computer will start, but he's going to ask me directly with a message to choose three operating systems which is the Recovery Console, "not to select this [active debugger], and Windows xp home edition.

  Nothing in the menu advanced options of windows would work even safe mode. I was fooling around in the recovery mode, and I have reason to believe that the system registry is corrupted for windows.

  I have trie offered to the http://support.microsoft.com/default.aspx?scid=kb;en-us;30754 method

  How do I recover from a corrupted registry that prevents Windows XP startup

  This article was previously published under Q307545

  , but I don't have a windows boot cd, so I couldn't continue.

  I'm looking for more help from the world wide web.

  My superior applications are due within a week and help would be greatly appreciated.

  Thank you for your time

  sincerely

  George

  If you want to, you can also do another type of bootable CD, and usually, you will be able to simply copy your important files on a USB key, and then on another system.

  Here's an idea:

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.org/download.html

  On the left, click on download, scroll down, choose the most recent version the download link is a little hard to see and they sometimes change the location of the download link, then you might have to look around her.  Today, it is at the bottom of the page, above the drop for older versions and looks like this:

  Hirens.BootCD.13.0.zip

  Beware of the other links on the page to other types of downloads for other types of CD - be sure that eventually you will download the latest version which is now a file called:

  Hirens.BootCD.13.0.zip

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• I accidentally opened a file with media player, and now all my files on the desktop and on the start menu have a .lnk position cannot get rid of it

  I was looking for windows, came across a file I does not recognize. I opened it with media player. Well he opened all of my icons/files desk and my Start menu with an exstention .lnk files. I am desperate to solve this problem before my husband gets home! I tried to do a system restore on the 15th, but he says the restore fails because he couldn't find not to a lack of time. file

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that the desktop icon change extension .lnk. Do not worry about the advice given will help you solve the problem.

  Method 1:

  Try to change the association of files from the control panel.

  Go to the following location to change the associated file.

  Start \Control Panel\All Control Panel Items\Default Programs\Set Associations

  You can access the link below and follow the instructions on how to change which programs Windows uses by default: http://windows.microsoft.com/en-us/windows7/Change-which-programs-Windows-uses-by-default

  Method 2:
  If the steps above fail then you can try the suggestions section of the knowledge base and check.
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://support.Microsoft.com/kb/322756

  If you have any other questions about windows, write to us, at any time.

• Replace the audio with and synchronizing with separate record

  Hello

  I read everything I can find, including many websites, the help file and a book, but can not find this response with instructions step by step using first Elements 9.

  I have the trial version and will purchase once I have understand that. I just need to make Youtube videos with a separately recorded audio file replaces the audio that is already on the video. in other words, I have a separate audio file to Mp3 of the same audio performance with an audio recorder and I want to replace the original video with the other Mp3 audio.

  What are the steps to ensure that the new audio is in sync with the audio already on video, from the original recordings and working through to the finished product?

  Thank you.

  I'm not Steve, but will offer my thoughts:

  • Most of the PrE users use Audio from their cameras, and less use separate devices, although I see more and more that.
  • Most of the PrE users do not 'clips', but again once, I see more and more of this in this forum.
  • It is probably impossible that an author can cover all the possible uses of a program, as before, even if they made a version three volumes. There are simply too many possibilities. Maybe Steve should consider making a companion book to his great tips & tricks, along the lines of "really advanced uses for PrE?
  • If any covered Steve implement, we wouldn't have much to do in the forum...

  I'm glad you don't have Steve's PrE book. If you decide to go with the pre as your NLE program, in light of what you do, I would add also, her book tips & tricks that you will most likely receive the gems inside.

  Good luck and happy editing.

  Hunt