file sharing of winows 7 64 bit for windows 7 32 bit

I can't access windows 7 32 bit or vista 32-bit to windows 7 64-bit except as a media device. I can access files from both windows 7 64 bit and vista 32 bit windows 7 32 bit. two windows computers 7 are on homegroup.

OK, next steps.
1. What is the NETBIOS name of your 32-bit computer?
2. What is its address IP-4?
3. What is the IP-4 address of the 64-bit machine?
Post again if you need more detailed instructions.

Tags: Windows

Similar Questions

  • Looking for the text of the "Microsoft Shared Source License Version 1.0 for Windows CE"

    Hello

    I am looking for the text of the "Microsoft Shared Source License Version 1.0 for Windows CE".

    With the help of Bing or Google gave the text of this license.

    I am looking for the text of the license, because I have a piece of source code that has the following file header and I would like to know what are the exact conditions for the use of this source code.

    //
    Copyright (c) Microsoft Corporation.  All rights reserved.
    //
    //
    This source code is under the Microsoft Shared Source license
    Version 1.0 for Windows CE.
    For a copy of the license, visit http://go.microsoft.com/fwlink/?LinkId=3223.
    //

    Unfortunately, the link is dead.

    Kind regards
    Mark

    PS: Yes, I know that my question is not a perfect match for this forum but the Microsoft Ribha Customer Service Representative (manager is Lalita) recommend to post my question here.

    The license can be found here:
     
     
     
  • How to get personal files on a backup external hard drive for windows 7

    How to get files from a backup external hard drive for windows 7 pro. ? I DON'T WANT TO RESTORE WINDOWS 7, JUST MY PHOTOS & DOCUMENTS.    TO THANK THE TAXI 53 DRIVER

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    You can restore backed up files lost, damaged, or accidentally modified versions. You also to restore files individual, groups of files, or all files that you have saved.

    If you are restoring files from a backup that was made on another computer, the files are restored in a folder under the user name that was used to create the backup. If the user names are different, you must navigate to the folder where the files are restored.

    I suggest you use the steps in this article and check if it helps.
    Reference:
    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • File sharing works is not between two computers Windows 7 Home Premium on a work network.

    Desktop computer is connected to a hub that is connected to a wireless router.

    Laptop connects via the wireless router.

    Both computers are in the same workgroup.

    Two computers indicate that they are in the same network of 'work '.

    The two computers 'see' each other.

    Both computers have the same advanced sharing settings:

    • Turn on network discovery
    • Open file and printer sharing
    • Turn on public folder sharing
    • Streaming media is off
    • Use 128-bit encryption
    • Turn on password protected sharing
    • Homegroup connection is not used, but is set to 'use user accounts and passwords'.

    As I try to get the laptop to connect to a share on the desktop computer, the user accounts and passwords on the desktop include the user account and the password for the laptop. This is an administrator account.

    There are actions on the desktop computer and these actions include the credentials of the user of the laptop computer with read/write access.

    Or machines is now faced with my right. I know one of them use AVG Free, but I'm not sure what the other computer uses for antivirus.

    I get the error message has to do with the user account that I use is not eligible not by office machine. I'll post the exact message when I am in front of the computers within a few hours.

    Sharing files between the two had worked, but then stopped. When you first install file sharing, that I had run into a different problem on the desktop where all settings indicated should be shared, but clicking on through a screen I got a message that file and print sharing has been disabled and I want to turn it on? (even while fixing in advance sharing settings says he was turned on...)

    Any ideas? I'm pulling out my hair. Thank you!

    Steve Woodward

    Seem firewall windows are playing games with you, try disabling it to see if it will work.

  • Share printer and file sharing has stopped working. -Between a Windows Vista-based computer, a Windows 7 PC and an Xbox 360

    A computer running windows vista and is connected

    Computer B is running windows 7 and it is wireless

    Is the Xbox 360 Wireless

    a couple of weeks computer disappeared from computer B and my xbox network adapter. computer a can still pull files from computer B, but it does not work the other way around. Computer B can share files with my xbox, but computer cannot.

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Networking of computers running different versions of Windows

    http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

    Have a read of the link above re Vista file and printer sharing.

    Permissions/Share info is there as well.

    If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

    Read the information above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Y at - it any OID for Windows XP?

    I want to follow my windows XP via SNMP client, is there any MIB file where I can find some OID for Windows XP?

    Hello

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.
     
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    Mau also consult you the following links for more information:

    http://support.Microsoft.com/kb/287547

    http://TechNet.Microsoft.com/en-us/library/cc776379 (WS.10) .aspx

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_snmptopnode.mspx?mfr=true

  • where can I find servie pack 2 for windows vista

    I can't locate winows service pack 2 for windows vista operating system.

    I can't locate winows service pack 2 for windows vista operating system.

    Read here: http://support.microsoft.com/kb/935791

  • File sharing Mac for iphone via Airdrop does not

    File sharing Mac for iphone via Airdrop does not. Please suggest me.
    In the finder of mac and iPhone, I clicked on "Let me o find out for everybody". IPhone is still not release shows.
    IPhone is the model of 5 s (10 iOS) and mac MAc mini end of 2014 (OS X EL Capitan - 10.11.4).)

    Cross the writeup here.  Make sure that both devices have Wi - Fi and Bluetooth connection 'On '.

    Use AirDrop to send the contents of your Mac - Apple Support

  • I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

    I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
    One of the installation files seems to be corrupted. HR:0 x 80070003

    Hello Amawob,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    You cannot install some programs or updates.

    http://support.Microsoft.com/kb/822798

    Reset the Windows Update components.

    http://support.Microsoft.com/kb/971058

    That should solve the problem for you.

    Thank you.

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

    On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

    Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

    a network must be disabled. Is it possible to run simultaneously?

    original title: served various networks simultaneously on windows xp

    Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

    This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

    HTH,
    JW

  • In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

    In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

    Hello

    Method 1: Make sure that the following services are enabled on the computer.

    (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

    -TCP/IP NetBIOS Helper service

    -DNS Client

    -Function Discovery Resource Publication

    -SSDP Discovery

    -UPnP device host

    To start the service and set it to automatic, follow these steps:

    (b) right click on each of the services listed above and click Properties.

    (c) click the general tab, and then, next to startup type, select automatic.

    (d) click on apply and then click Start.

    Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    For more information how to make SFC / scan, please follow this link:

    http://support.Microsoft.com/kb/929833

  • Where can I find instructions detailed for setting up sharing files between my desktop computer (Vista) and laptop (Windows 7)?

    However, I am hooked a home network, Uverse, AT & T. The office is connected, and the laptop is wireless. Both work for the Internet. Have not been able to get file sharing to work.

    Hello

    See the following help link and check if that helps.

    File sharing essentials

    http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

    Share files with anyone

    http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

    Networking of computers running different versions of Windows

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    It will be useful.

  • How to remotely wake up Vista for file sharing?

    I need help to wake up my Vista PC mode standby for file sharing application. The PC is connected to a router and I can wake him from sleep mode by pressing a key on the keyboard. In addition, I can wake up the PC for the Logitech Media Server application. I have the Logitech Media Server running on this computer. As soon as I turn on the player (carrier or SB3), the PC wakes up fashion 'sleep'. If the "sleep mode" works well for Logitech Media Server.

    Now, I want to make this PC a NAS. So I need to reactivate it for file sharing applications. I have laptop and a Media Player for a Western Digital that need to access the files on the Vista PC. Please advise on how I can wake the PC for this application.

    Thanks in advance.

    Hello

    I suggest you enable wake up LAN in the BIOS and check if the problem persists:

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-wake-on-LAN-capabilities

    Warning of the BIOS:

    BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Automatically file sharing is turned on whenever I turn on my PC window vista 32 bit operating system-business

    original title: file sharing?

    File sharing is automatically turned on whenever I turn on my PC window vista 32 bit operating system-buisness? I cut file sharing at least a thousand times and find this desktop pc which is not wireless it is pluged to my internet modem wireless broadband! Well, I find that file sharing is enabled immediately... What can say me... This is a hack or security or file-sharing compromise after the ' turn off just turns on immediately when I restart my desktop PC under administrator who is past-on account! HELP PLEASE!     Jason Grant Cozzie.

    Hi Jason SR.,.

    1. did you of recent changes on the computer?

    2. do you have security software installed on the computer?

    Usually, this would happen if you have any third-party security software installed on the computer.

    I suggest you temporary disable the security software installed on the computer and check if it helps.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    I hope this helps!

    Halima S - Microsoft technical support.

  • Made a bridge network distort your IP address for file sharing via a WIFI network?

    Dear Microsoft Answers,

    I have a network bridge set up the connection of two network cards wireless (an external and one internal), one of the witches providing internet service via the WIFI of my neighbours, the other to distribute the signal through MY House, some between my iPhone and my PC wireless file sharing works all by sharing connections but not when jumpered. I need bridge for good internet services connections. Please , can someone help me with this, Ive been having SO many network problems lately, and I hope for relief. Thank you!

    Hi Rio12345,

    We recommend you to check if the Windows Firewall or any other firewall installed on your computer allows the devices to communicate on the bridge.
    See Allow a program to communicate through Windows Firewall

    For further assistance, you can get in touch with iPhone support team

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Random numbers appearing in messages

    I am running Firefox 4.0.1 on 64-bit Windows 7 and every time that I post on a forum or send a Gmail account, it adds random numbers at the end of my entry. I tried using Chrome and it doesn't do this, what's the problem?

  • IPhone 5 button program

    Hey there, My Iphone 5 lock button no longer works. I checked the serial number and my phone is in the change program. But I bought my phone from the United States. and live in Turkey. The problem is, Appstore here does not help than the American air

  • Sansa Fuze - Direct connect to external speakers

    Hi all This is a great forum! My 1st post. I've seen a lot of info here about linking the "rocket" to the stereo, radio cars, etc., but I've not encountered something just plug it in plain old stand-alone speakers. For example, the speakers to small,

  • PC does not recognize there is a disc inserted and receive code 10 when trying to insert the CD or DVD

    Hi, my cd/dvd drive used to work fine, now when I put a cd or dvd it does not and will not play. I've done all the suggested troubleshooting (cleaning filters, uninstall and re-install drivers, ran several troubleshooting tools and I either get a cod

  • When you try to activate Windows 7 Ultimate, the error occurs: code: 0 * C004F063

    When I try to activate my windows 7 ultimate with the product key. the following error occurs: code: 0 * C004F063, Discription: the software licensing service reported that the computer BIOS is missing a required license. Please solve my problem, tha