File size too big after you import a GIF file

Similar Questions

• After you import an image (.jpeg) file for the Photos on my Mac app, can I safely delete this image file to save space on my hard drive?

  After you import an image (.jpeg) file for the Photos on my Mac app, can I safely delete this image file to save space on my hard drive?

  Yes, you can remove the file from the imported image, if you have imported the image as managed.  IE preferences in ave Photos settled on "import: copy items to the photo library" being the default.

  

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.

  All other non - CC Adobe video editing programs work.

  Help, please. Thank you.

  Dennis,

  Changing the video rendering engine should have solved the problem. Is it still pending?

  Thank you

  Regalo

• After you import the virtual machines in LM, can I remove VC

  Hello

  I had a couple of machines to import the configuration of another admin... After you import the virtual machines in LM, can I remove the virtual machines, I imported VC? I now have more need to fight them with VC. LM depends on of these always after import?

  I do not believe, but you can rename the folder and see if something is complaining.  If it isn't, it is probably safe to delete.

• How much free space will be left after you import?

  Hallo. I need to replace all the patterns on the integration server using those on the production server. I want to know how much free space is left on/off data to the integration server after this kind of refreshment. The two databases are Oracle 9 so I'll use exp/IMP. Here's how I do it. Could check you if I think that good? It is 72 GB of free space on/data on the target server.
  
  Size used Avail capacity mounted file system
  / dev/vgsmxdata/lvsmxcopy G 194,74 122,56 72,18 G G 63% / data
  
  Overall size of the exported schemas of the SOURCE_DB is 150 GB. The same patterns on TARGET_DB takes 90 GB. If the difference is 60GB. Free space in the data files in TARGET_DB is 30 GB. This means that in the first place, the free space in the data files is filled and after that datafiles extend? This would mean that a database would extend up to 150 GB and data/free space would be 40 GB after updating. Am I wrong?
  
  SELECT ' TOTAL :'|| SUM (ALLOCATED_MB),
  ' USE :'|| SUM (USED_MB) USED,
  "FREE :'||". SUM (FREE_SPACE_MB)
  FROM (SELECT SUBSTR (df.NAME, 1, 40) file_name, df.bytes / 1024 / 1024 allocated_mb,)
  ((df.bytes/1024/1024)-NVL (SUM (dfs.bytes) / 1024 / 1024, 0)) used_mb,)
  NVL (SUM (dfs.bytes) / 1024 / 1024, 0) free_space_mb
  V $ datafile df, dfs dba_free_space
  WHERE df.file # = dfs.file_id (+)
  GROUP OF dfs.file_id, df.NAME, df.file #, df.bytes
  ORDER BY file_name);
  
  SOURCE_DB@Server1
  TOTAL (MB): 170860.984375
  USED (MB): 152777.859375
  FREE (MB): 18083.125
  
  TARGET_DB@Server2
  TOTAL (MB): 121634,984375
  USED (MB): 92853,109375
  FREE (MB): 28 781 875
  
  Published by: Przemek P on October 9, 2012 10:48

  There are a few potential pitfalls. First of all, when you import, the definition of the INITIAL segment may be too big, using more place you expect. This can be things like adding many lines, remove them and do not reset the high watermark before an insertion above the upper limit, or sometimes old problems that nobody noticed have stayed or reproduced. Second, if you have tables that have been updated, by using the pctfree in most blocks, then pctfree is honored to import, leaving more room never-to-be-used in blocks.

  From my experience, those who do rarely estimate more than 10% to the title, but sometimes previous misadventures are not completely fixed, wasting a lot of space or using excessive space. I spend usually less computing time and time of observation. But then again, I know what to expect of my App YMMV.

• Print size too big to fit on a page in FF, not in Chrome.

  Have Win XP pro, Epson TX100 printer. At some time the impression was almost too small to read. Lately, it is too big to fit a page unless I use the print command on the file menu, where I can change the % the size, but then I get the entire page showing the FF headers, sidebar, etc.. I tried to change the font size in FF, but it makes no difference.

  I forgot to mention that the Page configuration settings are available in two places:

  (1) (File menu menu bar) > Page Setup

  If you do not normally display the menu bar, you can display it temporarily by pressing the Alt or F10 keys.

  (2) print preview

  The toolbar has a Page Setup button, and the scaling and orientation are exposed both directly on the bar.

• Problems with CHM search & Index after you import the Word Document

  Greetings,

  I recently inherited from all things RoboHelp at work, but the last person to work with our projects left 6 months ago.  I received a brief overview of how our CHM files are from the same word in HR 7 HTML document.

  Currently, I use RoboHelp HTML 9, but have problems with the indexing and search of an imported file in Word 2003 (.doc) features.  During my import, only a single topic is created and named after the source document.  I believe that this may be the root of my problems, but have not had much luck with a solution.

  I have stumbled my way through adjustment after adjustment, but feel I'm missing something obvious.  Any help would be appreciated.

  Thank you

  Ken

  Background:

  Our source documents have a working table of contents and topic structure 1 - 3.  When creating a new project and import the document, the table of contents are imported correctly.  TOC navigation links seem to work fine.

  I used the smart Index Wizard to find new keywords to topic titles and the text of the topic.  Unfortunately it seems that import only creates a single, named subject according to the word source document and associates so all the keywords of the unique subject.  When you try to navigate the index after the CHM is generated, all the links reference just the beginning of the document.

  When you use the search functionality in CHM, only a single result is returned for any search words.  This result is always the only subject, as described above.  The link to the results always picks you up at the beginning of the document, but highlights the key word throughout the document.

  When you import there is an Advanced button in any of the dialog boxes. Click and you'll be able to Paginate against selected styles. That will stop your document in the headings.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Missing spaces between words after you import the Word document in RoboHelp HTML version 8

  I created a document + 400 pages in Word 2007 and it imported in RoboHelp 8 (HTML, not RoboHelp for Word). Many places, the space between a bold Word and a word not fat is no longer there. I would like to avoid having to go through all of the HR document to replace the spaces manually. Not imported correctly?

  Seems perfect, works terribly...

  Things to consider:

  • Chances are, the different treatments of space are due to the question of if the space was included in bold the word in MS Word.
  • In addition, as Word files contain a large part underlying the binary code (macros and others), your security settings may or could be don't play well with the word stuff.
  • You import the Word file from a network location, or your local computer? Network traffic may be partially import impact, too.

  Bottom line? You will probably need to clear any formatting in the Word file and redo the formatting correctly. To test this, cut a few pages into a new Word file, clear and redo the formatting in Word, import file in another project HR the Word and see what results you get.

  To clear the formatting:

  1. Select text.
  2. On the home tab, in the group policy , click clear formatting.
  3. Redo formatting, making sure to do not format the spaces.

  Good luck

  Leon

• removal of the photos from the camera after you import to pc

  is it possible to set the system automatically deletes the images from my camera after importing to my pc?

  I stumbled upon this question. Looked around and concluded that the Windows Essentials (version 2012) of the software bundle is still available (of course free as usual) and works great on Windows 8 (supported by Microsoft). It includes the very popular Photo gallery software beside others, which will allow you to import and organize photos with ease and comfort. It has the usual function of very practical Import Options that let you set options related to the photos you import from your digital camera, including deleting automatically the photos on the camera after importation. See the screenshots of the one below.

  Get Windows Essentials from here: http://windows.microsoft.com/en-US/windows-live/essentials-home (I installed only Photo Gallery, Movie Maker of the Writer & that I intend to use, so you can choose what you want to install, instead of installing the full suite, if you prefer that)

  System requirements: http://windows.microsoft.com/en-us/windows/windows-essentials-2012-system-requirements

  Screenshots of configurable import for camera Options:

  1: import pictures and videos (for camera)

  2: import options (this is where are located the removal automatic and other practical options)

  I hope this helps!

• After you import the MSWMM file in Windows Movie Maker, the system hangs

  MSWMM FREEZES (what a surprise)

  After opening MSWMM and import my project that the cursor movement will begin erraticaly i.e. movement one or two seconds after I try to point and the operation I required will take his time is erratic in the activation and the images are erratic when read.
  A minute or two later everything "freezes". I had to 'Leave' to turn the computer off, wait one minute, then restart. It's so bad now, I had to stop using MSWMM, it's useless and a great disappointment to me. When I exit MM the cursor is always random for about 10 seconds. How is the mighty Microsoft Corp. cannot challenge these problems and let us get our projects?
  All other times, the computer works fine. I have not downloaded anything to cause this problem. I've defragged, Spybotted Temp files deleted, disc error checked, tried different suggestions of Youtube, and restored hoping can solve it, no luck.
  I run WINDOWS XP, 128 processor ATHLON, 56 k MODEM, 1.5 GB RAM, 120 GB HDD, IE7, Service Pack 3.I have made 10 videos previously and had a bad light with MM before but he managed to cope, now that's too bad. So, does anyone have helpful suggestions to what I can do to fix this problem so I can continue with my projects, please?

  After opening MSWMM and import my project that the cursor movement will begin erraticaly i.e. movement one or two seconds after I try to point and the operation I required will take his time is erratic in the activation and the images are erratic when read.
  A minute or two later everything "freezes". I had to 'Leave' to turn the computer off, wait one minute, then restart. It's so bad now, I had to stop using MSWMM, it's useless and a great disappointment to me. When I exit MM the cursor is always random for about 10 seconds. How is the mighty Microsoft Corp. cannot challenge these problems and let us get our projects?
  All other times, the computer works fine. I have not downloaded anything to cause this problem. I've defragged, Spybotted Temp files deleted, disc error checked, tried different suggestions of Youtube, and restored hoping can solve it, no luck.
  I run WINDOWS XP, 128 processor ATHLON, 56 k MODEM, 1.5 GB RAM, 120 GB HDD, IE7, Service Pack 3.I have made 10 videos previously and had a bad light with MM before but he managed to cope, now that's too bad. So, does anyone have helpful suggestions to what I can do to fix this problem so I can continue with my projects, please?

  =======================================
  . MSWMM would be your Movie Maker project file if it is a
  complex big project that you have been working on for a while it
  can be to reach the limits of your system resources.

  Creation of several small projects is better than a large
  project. If you save all of them in the movie .wmv format you
  can import movie collected files and combine them into
  one final film.

  Also... it may be interesting to try to install IE8... I remember
  See the reports of users of Movie Maker who has
  with IE7. Personally, I went straight from IE6 to IE8.
  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  More information:

  Movie Maker 2 hangs and crashes
  http://www.Papajohn.org/mm2-issues-acceleration-and-codecs.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Virtually all of the files are missing after you import the catalog.

  I'm NOT sure that has nothing to do with lightroom, except that yesterday my files were all there, now, they are absent.  It could be a hard disk failure.  Its just strange that it affected only the files that I tried to interfere in my lightroom catalog today.

  Well as out of town, I pulled a few thousand photos and them ingested on a daily basis in a new lightroom catalog that I created on my laptop.  Files imported into a USB external drive.  The laptop is win 10.  It is on the latest version of lightroom, CC.  Yesterday, everything was going well with the catalog, disk, and files.  All were there.  The catalogue and the photos were on the same drive.  The laptop was listed as the letter 'g ':

  Once I went back to the office today, I wanted to import pictures to my largest catalog on my desktop.  I have used this external hard drive for all my new photos in 2016.  On this PC, Win 10, the letter of the external drive is also "X:".  I started lightroom in my big catalogue very well.  I chose to import from a different catalog, accessed my X Catalogue outside in the car and started importing without a copy of the files.  This should leave the files in the same location.  It took a little more time I expected to import this catalog.  When I went to the structure of folders inside lightroom, it seemed that all the files have been imported correctly.  But there was a "?" from the folder.  I assumed that I just needed to do a "find" on the X drive as I thought that my lightroom catalog could have been pointing to the G drive.  Locate, but cannot find the files.  I've used windows explore to browse my files and the folders and files were all missing, with the exception of a folder where I shot some photos with a camera, about 100 photos in all.  Thousands of photos from other cameras were all absent.

  So next time, I ran a scan disk and windows came with a message of repair.  The repair said that it worked successfully.  But I looked in the Explorer, the files were still missing.  I ran a scan disk again and no error found.

  I looked in the trash on the desktop and there is no files on this disc.  If the missing files are still missing.  I had not saved the files yet since they were really vacation photos and have no critical and since I was going to save them after that I spent in review on the workstation.  Some are still on the cards and could be retrieved.  But I formatted my main map at least a couple of times and I'm afraid that most would have been crushed and is more viable, even using the card recovery software.

  Before you begin importing today, I don't check the disk to make sure that all my files were there.  There is no error in windows at startup and I don't mind just to check in Explorer or open the 'new' catalog first.

  1. Could Lightroom have somehow deleted files and can they be retrieved?
  2. Assuming that it was a Windows / hard drive error, can anyone recommend a program attempt to recover files lost like that?  Given that the entire folders, sound also lack if the index of the obtained partially erased disc.  But maybe the files are still there.  Then there is a program to search for them?

  Note that the other files on this drive all seem to be good.  The only missing are import of today.

  It is drive X:, but the files are not there.
  portable version is 2015.6

  Desktop version is 2015.5

  The

  Somehow, the windows removed them.  I use EaseUS data recovery to retrieve them.  He had no problem finding the files.  So I guess we can mark this resolved.

  Thank you.

• After you import the avi file to new laptop, reading looks like he will ignore the frameworks

  I created successfully a project of first Pro CS5 using my desktop computer computer (i7 with dedicated NVIDIA graphics card) without any problem. I then imported the video file avi created on my desktop to my old laptop (intermediate level) with the same edition of Premiere Pro is installed and enabled in Premiere Pro create a new project it without any problem reading. After moving first Pro CS5 to my new laptop higher end, I imported the avi file of the desktop to create a new project on the new laptop, but when I went to play the video in Premiere Pro on the new laptop, the picture is shaking during playback as executives are to be ignored. The new laptop is far superior to my old, so I don't know what is the issue. The new laptop is an i7, 64-bit, 8 Gig RAM, NVIDIA GeForce 650 M graphics card.

  Is there a different setting that I needed in Premiere Pro on the new laptop computer?

  Here are the details of video file:

  Image size: 720 x 480

  Sampling: 32

  Frame rate: 29.97

  Audio Format: 48000 Hz - 16-bit - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total duration: 00 41; 31; 17

  Average: 3.6 MB/second

  Format of the pixels: 0.9091

  AVI file details:

  Contains 1 track (s) of the video and 1 audio track (s).

  Interleave: 1: 28.99

  Video track 1:

  Size is 8,34 G bytes (medium frame = 123,44 K bytes)

  There are 74673 keyframes.

  Frame rate is 29.970 fps

  Image size is 720 x 480

  The depth is 24 bits.

  Audio track 1:

  The size is 456,22 M bytes

  Rate is 48000 samples/s

  The sample size is 16-bit

  Taking your advice, I discovered an error of 'beginner '. When I imported the AVI from my office, I was a hypothesis that it was copied to the disk on my new laptop... Oops! The glitter is attributable to the project on the laptop trying to access the file through the network traffic. When I copied the avi file on my laptop, then created a new project in the key of my laptop - problem solved. Thank you, Jim, the suggestion on several disks. I'm immediately incorporate.

• Cannot export first (after you import the JPEGs that were originally a PDF file)

  Hi guys, I'm having a problem exporting a video of first. It is tripped upward (as in, freezes my computer) by a few images that I imported.

  The stills were originally of a PDF file, I then open in PS and saved in JPEG format. It would be a problem in first?

  Another potential problem: the stills have layers of transparency. Could be the problem?

  Any thoughts?

  What size are the stills? you exported a PS RGB

• How to create a new subfolder and do appear in the view files after you import the pictures inside?  The folder does not appear after that I imported the photos.

  I use 14 elements on Windows 10.  I would like to create new subfolders in the folder view as I get pictures sent to me.  I want to keep by date.  When I import from a camera it creates folders but when I try to import them from a subfolder I created with the windows file manager, it does not appear in the Organizer.

  RonHoward wrote:

  I use 14 elements on Windows 10.  I would like to create new subfolders in the folder view as I get pictures sent to me.  I want to keep by date.  When I import from a camera it creates folders but when I try to import them from a subfolder I created with the windows file manager, it does not appear in the Organizer.

  Don't forget that your left folder tree is set to 'tree' (the little menu icon on the right of the title bar).

  Click on the + sign to the left of the main folder to display subfolders with images.

  If you want to see the subfolders without all the media files, select the master folder and right click, then choose the last option to display all of the subfolders.