File types do not appear in disk utility

Similar Questions

• Installed boot camp at halfway and do not appear in disk utility. But it takes place in the hard drive.

  I am really frustrated and tried to solve the problems of this days no result. Would be very grateful for advice please!

  So I went before partition my MacBook Air using boot camp. It only allowed me to partition of 22 gb because of space constraints. While he was the partitioning, I forced to leave bootcamp as I changed my mind and I wanted to clear more space before partitioning. However, my watch storage now that 22 GB is used up (probably the bootcamp partition). However because I left bootcamp while partitioning, I couldn't find bootcamp on my disk utility partition. How can I delete the bootcamp hidden partition? It takes too much space on my hard drive. Help, please! Thank you very much!

  Same thing here!

  Can someone help us please?

• How can I delete a drive letter that does not appear in disk management?

  After updating my firmware of dvd writer has been assigned a new drive letter (j), however the old letter (f) always watch under 'my computer' but does not appear in disk management. How can I remove or remove (f) so that I can reassign my dvd burner? Windows xp sp3.

  Thank you-

  Try to run, type: cmd cmd type: diskpart in diskpart, type: list disk

  Type: HELP to handle the letters.

  Also, technical material, highlight the hardware, R.click, select listed "uninstall."

  for all that is needed, w/o reboot pc, once thru, output, pc shutdown.

  Change the connection on the material to another (moving pins connector

  thereon if necessary, slave/master), once through, start pc. XP will reinstall it at startup.

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. It does not appear in Airport utility. Any suggestions?

  I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. The base station does not appear in Airport utility. Any suggestions?

  Whenever you change the modem or modem/router to which the airport links... or... change your Internet connection process, the airport must be reset to the default settings and then set it up again to work with the new device.

  Your message did not mention if you did that, but if not... to perform a Hard Reset on the router of the airport would be the first thing to do, to follow in setting up the airport once again, just as you would if the airport was new and connection to your modem/router for the first time.

• My Airport express continue flashing Amber after several resets. AirPort Extreme base works fine. Express does not appear in airport utility.

  My Airport express continue to Flash Amber, and do not appear in airport utility after several resets according to manual. My base station is plugged in and working correctly and the display in the airport utility. At the express need of repair?

  What exact model of the AirPort Express you have? How long have you had?

• I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility? The Express flashes an orange light.

  I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility?

  The Express flashes an orange light.

  I tried to reset to factory by using a paperclip for a little more than 10 seconds (green LED flashes).

  The Express flashes a light - orange after the reboot - that seems normal to me.

  I use an iPad or MacBook Pro (without port cat 5) set up.

  I would like to extend my WiFi network and stream of music with it.

  Read the manual and did some research but I'm stuck.

  Thank you for taking the time to help...

  NOTE: I also have a second generation version which works very well.

  Let us first make sure that you really have a 1st Gen AirPort Express. To do this, look for the model number on the side of the Express. It is difficult to see, with grey lettering on a white background, but the number starts model with an 'A' followed by four digits.

  You do not want to see A1264... not A1084 and A1088.

  Share your findings.

• After installing Acrobat or Reader on Windows 7 or Vista, icons of applications and file types change in Acrobat/Reader icon. Double click on a file or icon launches Acrobat or Reader. (The native application associated with the file type is not ope

  After installing Acrobat or Reader on Windows 7 or Vista, icons of applications and file types change in Acrobat/Reader icon. Double click on a file or icon launches Acrobat or Reader. (The native application associated with the file type is not open.)

  Hi peterb53490660,

  Try the steps of troubleshooting mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards
  Nicos

• File names do not appear in the preview of the synchronization in the DW8

  When I synchronize files between local or remote, the file names do not appear on the preview screen. He used to work, but now it doesn't. I see the icons Get, Put, ignore or Resolve on the left, but there is no name file next to them. Help! I upgraded to 8.02 to solve the problem of the server not saved FTP info and it worked. I was still able to show the names of files on the preview screen after I upgraded until a few weeks ago, when it just stopped working.

  I feel like a really fake on this one. I swear I don't remember doing, but I managed to hide the column leader. Three columns (Action, case, State) had always appeared, and one day, single Action and the State appeared. I got to thinking that the columns were like columns Excel and I could drag the columns to be small or large, and even hide columns by dragging the line completely right to the left of demarcation so maybe that I could do with the columns in the window of synchronization. Well, that's what I did. As I said, I have no memory to always hide the column leader because I didn't know yet that I could until after that I couldn't find it. I'm sorry that I didn't post my solution as soon as possible. I hope it works for you, too.

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.

• Bootcamp does not work after disk utility

  Bootcamp windows 10 does not work after I have free space in disk utility

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 163,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 87.0 GB disk0s4

  Mohans-MacBook-Pro: ~ mohanpagadala$

  Mohans-MacBook-Pro: ~ list of cs mohanpagadala$ diskutil

  No logical volume group CoreStorage found

  Mohans-MacBook-Pro: ~ mohanpagadala$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 318634168 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  319043808 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  320313344 169920512 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Mohans-MacBook-Pro: ~ mohanpagadala$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-318634168] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [319043808-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [320313344-169920512]

  Mohans-MacBook-Pro: ~ mohanpagadala$

• Windows 8 can't find my SATA drive (2). It does not appear in disk management, but it appear when I open the tab of properties on any drive and click displays all disks. What should do?

  I bought a new computer (custom build) and Frys Electronics put it together for me.  Disk 0 is a 128 GB SSD, 1 disk is a SATA 2 TB drive, and disc 2 is a 1 TB SATA drive. Readers of 0 and 1 have been configured correctly when I installed Windows 8 but Drive 1 was not found\initialized. Player 2 does not appear in the disk management window, but when I click on properties on any drive, and then on the "hardware" tab, the drive appears.  If I can get windows to find it, I can go configure manually.  DiskPart cannot find disc 2 in the 'LIST' command and when I get in car 2 on other commands that require a number of disc, nothing happens.

  What should I do?

  Thank you.

  I ran an old Western Digital (the two SATA drives are WD) diagnosis and there are 1 OK to drive.  I tested it and it doesn't have a writing that test a few zeros.  I thought that it was a bad drive and I must return to the seller.  The next morning I tried the WD diagnosis again and this time he passed.  The app then allowed me to format it and it assign a drive letter.

  It seems to be OK now, but I'm not load all the files on it again.

  Thank you all for your support.

  Don

• VMware Workstation 7. Machine.The virtual Windows XP file specified is not a virtual disk

  Hi all, thank you in advance for your help and sorry for my English.

  I was normally using Workstation on a Win7 system, emulating a Windows XP system. Now I try to turn on the machine and the following message appears:

  "The specified file is not a virtual disk.

  I reviewed the logs, the file .vmx and I can't find the error. I think that VMware can recognize the virtual drive as a SCSI unit.

  The files in the directory of virtual disk:

  VMware.log

  VMware - 0.log

  VMware - 1.log

  VMware - 2.log

  Windows XP Professional.nvram

  Windows XP Professional.vmdk (10 GB file)

  Windows XP Professional.vmsd

  Windows XP Professional.vmx

  Windows XP Professional.vmxf

  Tie newspapers, the .vmx file and a screenshot of the machine.

  Thanks again for your help

  As I have not examined the content of the hard I cannot give you a definitive answer but I'll tell you that, with the obvious corruption, shown in the first two sectors of the disk recovery at this stage, it is necessary advanced if it is not very advanced and can also be extremely laborious to get you in very advanced techniques.  The problem is that I don't have time to explain, and or to teach someone how to do what else can be right now because it was not learned and understood all night and just can not be easily passed along.

  Suffice to say if you did not good backups along the way, while it may have been a hard lesson learned I bet that in the future do you good backups from that point forward to easily recover when something bad happens new!

• A type does not appear in the preview

  I can see the animation of type when I press on enter on the keyboard of the timeline play but when the previewed image, some of them does not appear for some reason any.

  I am also using Macromedia Flash 8, Windows Xp, and I was wondering if it the file will be compatible with the latest version of flash available?

  Thanks for any help

  You may need to embed fonts for the type that does not appear

• Selection of the type (reverse type) does not appear when you select type

  I have AI CS5 on OS X 10.6.4. I just created an illustration. The problem is that when I try to type in this illustration, the text does not invert to indicate what was selected. The selection work; If I drag on the text, I would like to change, and then type the replacement text, old_text is replaced as expected. But it's as if we were working blindly.

  This is a weird problem and happens only in this particular document. If I copy the content to another document, it works very well there. It doesn't matter if I change the police. The problem occurs constantly in the present a document even if I open the document on another Mac, so do not appear to be specific to the computer.

  I found a solution by copying everything into a new document. However, I am curious to know why this is happening. I was wondering if anyone else had never seen this behavior.

  Show/hide the edges (selected in the view menu or via the Hotkey Cmd / Ctrl + H) is a per document setting. That would explain what you have seen.

  To "fix" your problem document, open, switch to Show Edges, then record under using the same or a different file name. (If you just Save without making further changes to the document, it will not take.)