Host adapter interface 1/2/1/1 status of the link down

Similar Questions

• Detection of failover of change to the status of the link network

  Hello

  Is there a way you can change the detection network failover of a distributed port (VcDistributedVirtualPortgroup) to the status of link group?

  Kind regards

  Jonathan

  Watch the workflow of library I wrote:

  / Library, vCenter, Networking, Distributed Virtual Port Group/update distributed group virtual port

  This workflow has all the necessary code so duplicate and remove the stuff you don't need. Do NOT run this workflow on a production dvPortgroup - it does not retrieve all the current settings and their maintenance. It is intended as a stream of teaching work to provide a code base for people to work from your use cases

• Disable vEthernet snmp trap-the link on 1000v status

  Hello-

  Are there options to disable the registered link interruption snmp on the 1000v Veth interfaces?  The normal 'without snmp trap the status of the link"command is not available on a Vethernet interface on port-profile.  You can do it on the connection ports rising physics, but who don't buy me anything.  The example of this shows doc you can, but that doesn't seem correct to me, http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4/command/reference/n1000v_cmds_s.html#wp1309091

  I prefer not to disable all notifications link snmp status, but maybe it's the only option.

  Thanks in advance

  Hey Chad,.

  I created the Bug next to track this problem in versions 1.4 and 1. 4A:

  CSCtx41516 - Disable 'snmp trap link-status' on a vethernet interface

  Essentially, it is a summary of the discussion in this thread and try I did accordingly. If all goes well, you should be able to find out.

  With respect to the request to apply the configuration to the port-profile level, I went back and tested whether this feature was never available in SV1(3b), (3d) SV1, SV1 (4) and SV1(4a). The answer to that is unfortunately not.

  If you need this feature, because it would be beneficial in your environment where you create interfaces vethernet 1000 +, I recommend that join you your team account/sales and put in place a business case for the feature request. They can help to put it together and try to get the feature approved by the developers and the Business Unit request.

  I would like to know if there is something else.

  Thank you

  Michael

• Network host adapter and the status of the connection

  Does anyone know the property of the object to get the host 'Link Status' network adapter?

  I can get the name of the NETWORK adapter and the speed duplex but nothig on the status of the connection

  Thank you

  You can not get the status of link directly (as far as I know).

  You can detect the status of "link down" through the linkSpeed in PhysicalNic object property.

  You can use something like this

  (Get-VmHost  | Get-View).Config.Network.Pnic | %{
       if($_.LinkSpeed -eq $null){
            Write-Host $_.Device "Link down"
       }
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• My Acer Aspire 9410Z (Vista) is not read my 4 GB SD card, even though I have a SD host adapter. Help?

  As stated above, it does not appear that this is on my computer. I am very confused because I have been asking this question for some time and received many answers, but none of them went around. A host adapter is different from having a SD driver? I'd like to think, it is, but I'm really, really confused. ^3^;;;

  I need to get music on my SD card for my DSi. :/ A 2 GB SD card would be better?

  Hello

  This SD card has already worked on your computer?

  Method 1: Check the status of this card in Device Manager.

  See the links below for help on Device Manager.
  
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Method 2: Try to use the same SD card on another computer and check.

• Pavilion p6210y: SATA host adapter problem

  Hey guys,.

  I think I found a problem with the SATA host adapter in a desktop Pavilion p6210y.  I find it difficult to restore the system after a hard drive replacement, and I discovered that if I have TWO hard drive and the CD drive unplugged so the machine will start.  If I plug the hard drive OR the CD, then the machine hangs on the HP BIOS screen.  Output voltage of the PSU is normal.  I think the guest card (motherboard) is toast.

  I did a little research, and it seems that it is a known problem with this motherboard.

  HP P6210Y does not detect hard drive

  This link may be the inlaid right.

  Card failure causes a MCP chip overheating, which controls the SATA ports.

  Here are some links:

  Ports of SATA HP Pavilion p6210y

  M2N78 - the motherboard does not see my records

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• SDK API to use to check the status of the host after RebootHost_Task API perl for VMware

  I use the RebootHost_Task API, ping the server ESX to check if it is in place (using the Net::Ping module), then using ExitMaintenanceMode_Task to get out of the mode of maintenance for the ESX Server.

  I sometimes lack of InvalidHostConnectionState when I trigger ExitMaintenanceMode_Task. This is because even if the ESX host is to ping requests, the SOAP request has failed. What Vmware perl API SDK can be used to check the status of the host before triggering the aPI ExitMaintenanceMode_Task

  Probably the best way is to check the HostSystem runtime.connectionState.

  $host = Vim::find_entity_view (view_type-online 'HostSystem', properties-online ['name', 'runtime.connectionState'], filter => {-online $host_name 'name'});

  $connected = 0;

  until the ($connected) {}

  $host-> update_view_data();

  $connected = $host-> {'runtime.connectionState'};

  # Add a timeout here break

  }

  #.. .do something with newly restarted host

  I also used the runtime.bootTime in the past, where I waited for the value is longer than the previous string XSD time recorded before the restart request (with a long timeout to avoid problems).  It's better than the connectionState option since it manages the window between the restart request and the actual restart.  It * doesn't * updated until the host is connected again (and available to call you to leave the maintenanceMode).

  These values using works even when the host is not connected (cached by the vCenter API service), so you can wait for them to change (and in the case of connectionState, once again).  You'll just take into account the window of the application restart and real reboot before you start querying using connectionState.

  You can probably drop your logic of ping, so if encode you correctly around the State API variables for the host.

• Status of the host (red, yellow)?

  Hello.

  A simple question, I think that...

  It is possible to know the status of the host? alias: Red State, yellow State or Ok...

  I see Get-VMHost shows State and ConnectionState attributes. Maybe the State?

  Thank you in advance.

  Best regards.

  Try again with

  Get-VMHost | Select Name,@{N="Alarm State; » E={$_. ExtensionData.overallStatus}}

  The State property is depreciated, and it shows connected/disconnected/NotResponding/maintenance.

  See the VMHostState enumeration.

• IP range by default subnet for host only Interface?

  Is the subnet IP range for the 'only' (VMnet) host interface always the same?  Or is it randomly generated during installation?  Maybe it is different for each platform?

  I need to know because I create a virtual computer to share with my colleagues for use in a test/lab environment.  On my desktop linux, the "host-only" interface (VMnet1) by default for the subnet 192.168.112.0.  However, a VM player freshly installed 3.1.3 on Windows 7 by default 192.168.61.0.  I need the subnet to be consistent, because I'll have to use static IP addresses in the virtual machine (a requirement for Oracle 10 g RAC clustering).

  I have my ready-to-run VM as possible and I must not walk my colleagues by running vmnetcfg.exe, if this is possible.  So if I know that it will always be 192.168.61.0 on a Windows 7 host, I'll just change my VM to use this subnet instead.

  Any suggestions?

  Thank you!

  It will be not consistent from one host computer to another much less that the same machine uninstallation/reinstallation can / will assign a different subnet, then the other it should be taken into account.

• How do the work of Illustrator CC Host Adapter?

  I tried to set up a test Extension for Illustrator that uses the library of the adapter to the host, but Illustrator CC seems simply never to load the plugin of the adapter to the host.

  I use the Extension Builder 2.1 test and Illustrator CC (17.1.0 64-bit) on Windows 7.  The AIHostAdapter.aip files are in the correct Plug-ins\Extensions folder, and the AIHostAdapter is listed when I go to help-> system information.

  My loads fine Extension in Illustrator, but the AIEventAdapter.getInstance () .pingPlugIn () is always out 'timed' event

  I use a simple "Hello" Extension created by the manufacturer of the "New Extension project" wizard extension and include the libraries of the adapter to the host in my selections of what must be used.  I exported the project to ZXP and installed.  Install the extensions Manager, AIHostAdapter.aip files go in the right place, Illustrator starts just fine and charge my extension, but the host Adapater never seems to be available.

  This same Extension works very well and very well in my other Illustrator CS6 instance can access the host adapter.

  Is there some other trick to get it to work with CC?  Or is the integration of host Adapater in CC somehow broken right now?

  Please let me know if any additional information would be helpful.  Thank you!

  I believe that the Extension Builder trial version comes with extension of Ia corrupt CC

  In addition, there are problems with inDesign host adapters - include it and extension will not compile

• State errors network adapter interface increasing (ifconfig) on Linux/CentOS 5 OS guest

  We found that the RX errors continue to increase so that check the status of the NIC via ifconfig, located on Linux guest on ESXi3.5/4, no matter whether he uses it or not link:

  bond0 Link encap HWaddr 00: 0C: 29:B0:B6:11

  INET addr:10.1.50.11 Bcast:10.1.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:feb0:b611 / 64 Scope: link

  BROADCAST currently RUNNING MASTER MULTICAST MTU:1500 metric: 1

  Packages: 1075980 RX errors: 308 dropped: 597 overruns: 0 frame: 0

  Dropped packets: 491505 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 1078732023 (1,0 GiB) TX bytes: 486309796 (463,7 MiB)

  It doesn't occur on the same OS vmwared on another Linux through vmware server 2.0. The ESXi3.5 is installed on the IBM 3550 with two network adapters.

  Anyone filled a similar question before? all advice is appreciated.

  You can use the configure script to configure if you load a new kernel.  Other that that, you shouldn't change it again.  The tools will install the network improved module, and from there, no other management staff is really necessary, until you upgrade your kernel.  When you do this, you will need to restart the installation script to load the modules in the new kernel.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• Equium A60-191: application control status of the battery in the system tray?

  I had to reinstall XP. This has caused the loss of pilots and probably other things that I don't know.

  One of the elements lack seems to be the software or driver? for the battery. The battery is cooler at full power. The software located in the system tray used to indicate the power status and if it is ac or dc connected.

  Any suggestions that I need and where I can get to fix this, please?

  Hello

  I know you don t need the drivers or software for charge the battery to full power. Only what you need is the Toshiba Power saver utility.
  This utility is very useful because you can set different power for portable use different modes. For example, if you disconnect the laptop computer of the energy-saving AC adapter will automatically switch to the mode of energy that has been configured for the use of the battery.
  These methods help take care of the battery and increases battery life and it shows a battery status in the taskbar
  But there is nothing to recharge the battery witch.

  In my manual, I found a lot of info on the battery and how to manage the use of the battery. I think that the same information you will find in your user manual. Check it out.

  The last possibility is a malfunction of the battery.
  But in this case only a battery replacement will solve your problem.

  If you want you can try to check if the same thing happens with the new battery.

• Why lsnrctl status displays the services that are not in listener.ora?

  I have a database 10g on Solaris 9.

  When I do "lsnrctl status" I get the following:

  LSNRCTL for Solaris: Version 10.2.0.5.0 - Production on July 29, 2015 11:46:30

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=cees2) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  For Solaris TNSLSNR version: Version 10.2.0.5.0 - Production

  Start date July 14, 2015 07:52:31

  Availability 15 days 3 h 53 min 59 s

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /oracle/tns/listener.ora file

  The listener log file /Oracle/OraHome/10.2/network/log/listener.log

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=cees2) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC)))

  Summary of services...

  Service 'PLSExtProc' has 1 instance (s).

  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...

  Service "FEC" has 1 instance (s).

  Instance "FEC", State LOAN, has 1 operation for this service...

  Service 'ceesXDB' has 1 instance (s).

  Instance "FEC", State LOAN, has 1 operation for this service...

  Service 'cees_XPT' has 1 instance (s).

  Instance "FEC", State LOAN, has 1 operation for this service...

  The command completed successfully

  And here is the content of the listener.ora file:

  ##############################################################################

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST = cees2) (PORT = 1521))

  )

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC))

  )

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = PLSExtProc)

  (ORACLE_HOME = oracle/OraHome/10.2)

  (= Extproc PROGRAM)

  )

  )

  My question is where are the EEHC, ceesXDB and cees_XPT services if they are not defined in the listener.ora file?

  Thank you

  Michael

  Try this search string in your favorite browser:

  listening service Oracle xdb

• How to check the status of the server added to the vMA

  Hello

  I added 3 servers in vMA. vifp mailing lists list all servers added to the vMA. I turned off one of the servers that has been added to the vMA. But still the mailing lists vifp shows all servers, including the one that is turned off. Is it possible to find out the status of the server added at the VMAs?

  Thank you...

  When you add add a target to vMA to management, it is adds two local accounts (user-vi and vi-admin) and maintains an internal list of targets that can be displayed by using the option of mailing lists . There is no concept of status since it fails just a command when you try to run a command to a host that is not available, you can run a script very generic that loop you through all targets and based on this that take you into account all the targets that are not online.

  A good would be /usr/lib/vmware-vcli/apps/general/viversion.pl

  You would also do a simple ping test before execution of your orders, so it really depends on what you want to check, but there is nothing special with the vifp which gives a current state of your targets.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Status of the dashboard to EBS R12.1

  Hi hussein.
  
  EBS R12.1.1
  
  I got layers apps on node1 and db on Node2.
  
  When I check the State of dashboard, I received the following:
  

  Data Retrieved: 17-Aug-2010 13:50:36 
  Host Platform Host Status Admin Database Concurrent Processing Forms Web 
  RDBMS2 Linux x86-64 (64-bit)  
    
   
   
   
  APPS2 Linux x86-64 (64-bit)   
      

  I see on db layer (rdbms2 server) are the (checked) process active > State of the host and the database.
  
  So what about the apps layer (apps2 server) are the active process modules > status, admin, concunrrent, the host web forms processing.
  
  Is it ok if the status of the host is checked-active time on both nodes?
  
  Thank you very much
  
  Ms. K

  Hello

  Is it ok if the status of the host is checked-active time on both nodes?

  Yes, because each node represents one (or more services) and both are active (upward).

  Thank you
  Hussein