Files in my internal memory have no tag?

Similar Questions

• BlackBerry Smartphones to transfer files from the internal memory to the PC, Bold 9900

  I have a video recorded on my internal memory and want to transfer them to my PC, but cannot figure out how?

  Hello and welcome to the community!

  For me, the mass storage Mode is the simplest method to achieve:

  • KB29523 How to manually transfer files between a BlackBerry smart phone and a Windows computer

  Good luck!

• Using issue view file when you use mp3s on the internal memory and the memory microSD external

  (1) if I have folders of mp3 on the player's internal memory and on the external drive microSD memory, can I use the folder to view all folders on the 2 memorys simultaneously integrated on one list or do I have to go through the files on each memory separately.

  (1) if the answer to question 1 is Yes, then I would like to now if I can have on the internal memory and external memory records with the same name, but with different files and the player will display these folders with both files on the internal memory and the external.

  I want to know because I like to browse through the files, and if the internal memory is full, I wish I could add more files in the folders where the internal memory by making a folder with the same name on the micro sd, and I don't like to go through the files on 2 devices at the same time, just on 1 list.

  Help, please.

  Thanks in advance

  The Clip + Treaty internal and external cards in 2 separate sources, under the folder view (it is quite logical, when you think of him, and just as 2 separate cards on your computer).  And if you look at the 2 lists separately (again, just like on your computer).  When you view your files using ID3 tags, both internal and external map content is merged in 1.

  If you do not have to see 2 separate lists, you can simply keep most / all of your content on the map either internal or external (even by, if you were really dead set on it, for example get a 2 GB Clip + and then using 8 or 16 GB external with her new card).

• New 4 GB Clip + empty shows 8 GB card when the internal memory has more than 10 files

  If I have more than 10 files on the internal memory, external 8 GB card will appear empty. If I format the internal memory and does not add any files, I see everything on the external card. MSC is set and PC, I see all of each drive.

  Any advice? I had rather not return this if I can make it work.

  Thank you.

  Initially, this was resolved by a reupload 1.02.15A firmware. But the problem comes back.

  I went to the RockBox firmware, and it works as expected. I'll check the next official FW and see if it has not changed.

  For now, I'm happy with RockBox.

• Unable to connect to the PC or use the internal memory

  In early 2009, I bought a 8 GB rocket with a 8 GB SanDisk microSD card and everything was fine.
  I was using your desktop PC running under Windows XP SP2, updates and manage the files in the internal memory and 8 GB microSD card. Then I went abroad for a few months and was using an IBM Thinkpad laptop. Still, everything was fine.

  After his return home tried using the "rocket" with my desktop again. It loads ok but can't see it in the 'windows explorer', WMP11 or among all media players. "Device Manager" shows absolutely nothing about the "rocket".
  SansaUpdater installation can not be completed, peripheral cos is not recognized by Windows.

  I tried the USB, "automatic detection", MTP and MSC modes.
  I also tried another laptop running Windows XP SP3.
  I have read the FAQ here and the title of "Player Sansa" not recognized by the computer to
  http://KB.SanDisk.com/app/answers/detail/A_ID/42/SNO/0
  I have'nt got another cable to check, but I followed some other suggestions.

  Also, I couldn't play anything in the internal memory. So I formatted it.

  'Info' says:
  Firmware version VO1.02.28F
  7806 MB memory
  Free 7641 MB

  SD Card 7572 MB
  Free 521 MB

  As it can not connect to the PC, I can not write in the internal memory.
  Rocket to read files in the SD card. But to change the files that I have to remove the SD card and use it in a card reader.

  I luv the sound quality of the rocket and you want to use again.

  Can anyone help?
  If it's a matter of windows?
  Is there some kind of driver for Windows XP SP3 that I can download from someware?

  Thank you!

  AT4
  A Samsung YP - T9B 2 GB, I've had since 2007 works very well with PCs and laptops.

  Looks like your cable is going bad. The data connection is different from the connection of load, so you can always load but have a data problem. Software cannot fix a broken wire.

  You can get a generic cable from Amazon for a bit of money and test.

  This cord E200 will also work with the "rocket".

  http://www.Amazon.com/SanDisk-Sansa-series-charge-cable/DP/B000NKCSUC/ref=sr_1_4?ie=UTF8&QID=1354833...

  Or looking accessories sellers to cord sync Fuze on Amazon, cell phone, etc..

• Store the data in the internal memory of the device

  Hi all

  I need to check my database file in the internal memory of the device because if I save in sdcard chances are there... then delete, how to save db file to internal memory by programming... Please give any suggestions

  Thanku

  Internal "SD card is referenced using store instead of the SD card, but be aware that space is limited, and in fact, this area does not exist on some devices.  You cannot use SQLite data directly from persistent memory, but I guess that you can copy the SQLite database to and from this store, maybe when you open the program and back when you close it.  I would not recommend this if you have a database is larger than 256 KB.

  I suggest that users remove the SD card are just something you will have to program autour.

• How to access the internal memory of Blackberry?

  Hello
  I am currently to access the file operation in the SD card. I want to access the file operation in the internal memory of Blackberry?

  To access the file on the internal memory operation use file:///store/home/user/filename

• Camileo S10 - Arcsoft doesn't recognize not all files on SD card and internal memory

  I just bought a Camileo s10 camcoder.
  So far, I was pleased with the product until I connected it to my pc (vista compatible with recommendations).

  I installed the Arcsoft software, but I've never had any file import because * the program recognized the sd and internal memory as void * (I could read the files in the drive of the camera, as well as my pc card reader).

  I have used other similar suites with no luck. Then I tried to format sd hc 8 GB card and restore my files but unfortunately I noticed * video/foto files not recognized at the time, even from the camera *.

  Another concern is that I had a trailer (720 p) hd .mov file in my memory card and the camera could not see (+ I wanted to use the camcorder as a player HD plugged into my sony full hd tv +).

  I looked for answers almost anywhere, but so far I have had no response

  Hello nikfam,

  I also have a S10 Camielo, installed the software Arcsoft on Windows Vista and I am able to see images and mov files if I connect the cam via usb cable or if I insert the sd card into the card reader.
  He shows me the internal memory and the data stored on the card (Class6) 8 GB SDHC.

  Maybe you need a card with a higher class. Where did you try to format the sd card? On the inside of the camera or on your pc?
  Please take a look at the right format.

  Have you tried another usb port? If you use a hub, check that there is enough power.
  I downloaded both trailers 720 p and saved on my sd card but my S10 couldn t see too.

  welcome them

• Motorcycle G 3rd GEN cannot transfer files from internal memory to SD card.

  Hello

  I recently bought this mobile and updated the marshmallow immediately. I formatted the SD card to internal storage and I have no problem to move applications (a little), but I'm unable to move or copy the music or files.

  There seems to be no the mobile option (settings > storage & USB), since the applications themselves (like Google Play or Gallery), or from the camera to set the default value for the storage location.

  I tried for hours to check in different forums, but I'm not able to find anything conclusive.

  All I can do is Exchange of files between my PC and the internal memory, but I can't access the SD card in the PC (I already read that it is impossible, as it is encrypted), but what I didn't expect is unable to do the same between the internal memory and the SD in my phone.

  Anyone has a solution or explanation or why I can't do this?

  Thanks in advance.

  Oh Hi, me again.

  I found a solution and I want to post here, just in case someone has a similar problem.

  Apparently, the first time that I formatted my internal SD card it was didn't appropriately. I don't know why, but it happened.

  From settings > storage & USB > SD card > tap the three vertical dots on the upper left corner and choose "as portable Format. I advise you to remove all apps before do it for return to the internal memory of the mobile. Once empty to proceed, you can choose the same menu last for formatting as internal (again). Follow all the steps in the procedure to move the files to the memory of your mobile phone to the SD card.

  I did and I can transfer files from my computer it, music, videos, photos and everything.

  Great!

• Files FLAC, internal memory ok not on the micro SDHC!

  Hello world!

  I have a Sansa Clip + 2 GB. And I have a 8 GB microSDHC (FAT32) inside.

  I try to read some files FLAC, is working on the internal memory of the sandisk card, but when I tried to put the same folder on the memory card. I use the 'Files' view to play music.
  The sansa shows 'empty '.

  Its a little strange. Each files are encoded with the latest version of the codec flac level 0.

  The firmware on the sansa is the V01.02.18A.

  Thanks for your help!

  Sky

  PROBLEM FIXED WITH A QUICK SEARCH!

  Thanks to Tracyohus (#28 message)---> section Super!

  (http://forums.sandisk.com/t5/Sansa-Clip-Sansa-Clip/Sansa-Clip-and-8GB-MicroSD-Not-Working/td-p/21081...

  You must follow these steps:

  1. Backup current content.
  2. Format the card in FAT32.
  3. Put the card in the reader and then turn on the player.
  4. After the player has finished refreshing media, turn off the player and remove the card.
  5. Replace the content on the map in the MUSIC folder created by the player.

  It's working perfectly!

• Can not remove books Audio 5 of 8 GB internal memory... have NO books on the PC Explorer

  I have W7 64 bit Office & a Sansa Fuze 8 GB drive.   I use MTP drag & drop to transfer audio books mp3 or drag & drop ripped CD from the library in Sanza MTP file.  I don't use Media Player for nothing I.have has always dragged & dropped directly.  I delete books on my PC by going to tha Sanza MTP folder and remove the Sansa DPW record book.  Did so successfully for hundreds of audio books, BUT I have 5 books on the player, I don't SEE on the PC which take on a GB of memory on the Sansa internal memory.

  What I see on the PC, I can't delete.   How can I delete these files & folders?

  Phil

  Try switching the mode USB, Meteorological Service of the Canada. Your computer cannot see files loaded in one mode at a time. Maybe at some point your player has been in mode Auto Vice that would allow him to connect to MTP or MSC without your knowledge.

  If you are not paralyzed on usiing DRM files why you use MTP mode? That's the only reason why you would need to use this mode, and MSC is much less annoying.

• I moved a file to one internal drive to another on a MacPro mid 2012. Whenever I open a moved file, I have to update the links manually. Is there a procedure to do it automatically?

  I moved a file to one internal drive to another on a MacPro mid 2012. Whenever I open a moved file, I have to update the links manually. Is there a procedure to do it automatically?

  How to create the links?

  Are we talking ln links?  Use flexible links.  the default value is difficult.

  R

• Internal memory of Motorola Charm, how much do you have?

  Yesterday, I became the proud owner of a Motorola Charm, or I would have been if it had been the device that they announced.

  It turns out that I have only 100 MB internal memory available to install applications. My biggest concern with the charm was that the advertised 512 MB is not enough, and because it has Android 2.1 I wouldn't able to install to SD card either. I just found out that I have already exhausted my charming 100 MB of memory and I have not yet installed half of my essential apps! Anyone else had this problem or knows how to fix?

  Hi ron,

  I also have charm. It has 170 MB of memory of the phone but that about 100 MB is already filled by motorola. Now, we have just about 70 MB of space to store apps. There is no way to install apps on SD or Flash. There is no custom ROM. But there is a way around the charm and then install Cyanogen. After that, you can partition your SD card in a primary memory of 512 MB (which act as a memory of the phone). And to change your applications to your SD card, you must Link2SD app. Just google these and you'll find pages explaining the methods.

  Now, if you want to use your charm factory without rooting and making it unstable, you just download the applications needed to charm which supports and then download an application called "appmonster. After that, save all of your applications. Then uninstall the applications that you do not use frequently. Download new again then backup. You call always reinstall applications that you have backed up and uninstalled from archive appmonster.

  It could be that useful...

• Insufficient 'Storage' error when I have half a gig of free space on the internal memory...

  Cannot update or download new applications. I have 465 MB of internal storage space. Have you tried the "solution" offered on another thread here re: Uninstalling playstore updated and that did not work.

  Get very frustrated with the z3 compact because it seems obvious that even with the ability to partially move apps to SD card it would never be enough space for this works as an AAA flagship phone. Sony had to know how many Android apps are bolted on taking the lion share of the internal memory. Why make a phone with this level of the plug and then skimp on some ugly cheap storage?

  Yes, you can remove the card and backup your contacts and you can perform a repair using PC Companionsoftware. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 80% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• How can read/write on a file and stored in the internal memory of the device, 10 BlackBerry?

  I want to store a string value of my request. After that, I remove my device app & reinstall my app. I want to get the previous value stored in recently installed application.

  I think that if I can write the value to a file that is located in the internal memory of the device. After that, I read the value of this file in any time. I am new to the cascade of Blackberry, so I don't know how to write / read a file.

  Please help me...

  Thanks in advance.

  Hi all

  I solved my problem. I'm using the code below:

  QString call: readFromFile()
  {
  QFile textfile("shared/documents/Test.txt");
  QString str ="";
  If (textfile.open(QIODevice::ReadOnly |) QIODevice::Text))
  {
  QTextStream in(&textfile);

  Str = in.readAll ();
  }
  else {}
  QTextStream out (stdout);
  off<>
  }

  TextFile.Close ();

  return str;
  }

  Thank you all for the valuable suggestion...