Filled with downloads remain when you click "Clear downloads."

Similar Questions

• Get a small symbol of a circle with a slash when you click different things on a page

  Original title: a slight aggravation

  When I click on different things on my page I get this little symbol of a circle with a slash in there, what could be the cause of this? my virus scan is not picking up anything.  What he does is more less freezes the page for a few seconds, then goes back to work again. but she does a lot...

  Hi Darrell_p.kelley,

  1 Windows operating system you are using?

  2. this happens to you when you are clicking on a specific program?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  You can check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Microsoft safety scanner

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Why the flat firefox image on the start with WASD page when you click it?

  When you select at home, the normal firefox icon flashes on and is replaced by an image tilted slightly with another small character to the left of the head of Fox and the words click me! If you click on it, the same image now has the letters WASD and a key appears in the centre of the world where the Fox is wrapped around. I didn't know this until the update to the latest verson 33.

  If you prefer not to see excerpts on the topic: home page or otherwise have problems with a snippet of code, you can set the browser.aboutHomeSnippets.updateUrl pref an empty string on the topic: config page.
  Delete the storage\persistent\moz-safe-about + House in the closed Firefox with Firefox profile folder (Firefox '3-bar' menu button > exit/Quit) remove code snippets stored in IndexedDB and make Firefox to use a default extract value.
  You can reset the pref browser.aboutHomeSnippets.updateUrl through the context menu on the default to reactivate the code snippets and make Firefox recreate the moz-trunk-fort-about + folder.
  You have to close and restart Firefox after changing the value of the preference of browser.aboutHomeSnippets.updateUrl.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Hello, Ive just purchsed PSE 13 and when you click on the download button, nothing happens. It routes me to a black screen with an icon of Adobe, but that's all. Can someone help me in what I should do next?

  Hello, Ive just purchsed PSE 13 and when you click on the download button, nothing happens. It routes me to a black screen with an icon of Adobe, but that's all. Can someone help me in what I should do next?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  Original title:

  Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

  I don't know how to fix. Help, please.    Win7 windows Explorer click

  Office & recent locations & grterror msg:
  This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
   
  Information given in the new thread:
  Error Msg When you try open office spaces & recent since the win Explorer

  when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

  Hello

  Welcome to the Microsoft Community Forums.

  I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  1. Have you made changes on the computer before this problem?
  2. What is the full error message?

  I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.
  
  See:
  Use SkyDrive download collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  The average while you can try the following steps and check if the error reappears.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Back with the details so that we can help you further. We also indicate the result of the suggested steps.

• I received a pdf file and the words in the text of the form filled in and saved tabs/forms appears only in the only filed when you click on this field.

  Hi, the text in tabs/forms of the form filled in and saved text doesn't appear when you click on this tab and field offices. When I go to another tab / filed, it disappears. I need to see everything at once.

  Auto-fill text fields is inactivated.  I have acrobat Pro XI / Win764bit. I can't find anything useful in the German speaking forums (there you will find only: save it on your desktop, open the with another program - not adobe, save it as a .jpg, use the preview and save/print pdf, open with photo shop and so forth but nothing works.)

  It would be good to get a link to an old solution or a useful answer.

  Kind regards

  Is there a chance that the application overview on Mac has been used to complete and save the form? What you describe is a typical sign that it was like overview corrupts PDF forms in a number of ways. You can fix this in Acrobat if you have access to a blank form uncorrupted by exporting the form with FDF data and important in the blank form.

• What happens when I click 'clear downloads?

  On Windows 7 downloads, which 'clear downloads' means? They are deleted, or they are just hidden? Thank you.

  You may have about the option clear list to view downloads window on the right? You can access to this either by pressing ctrl + j or settings > view downloads in IE.

  If you click clear list it erase download list of items not to download files.

  D09r

• What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images?

  What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?

  The images could be anything - check the links Panel.

  What you see (and copy) is just the screen preview, not the actual image data.

• How to clear the cache and page reset when you click on tab

  Hello
  I use two level model tab and its Apex 40.
  I would like to clear the cache and reset pagination when you click level 2nd tab
  Is anyway to do this?
  Thank you.

  hlthanh wrote:
  Hello
  I use two level model tab and its Apex 40.
  I would like to clear the cache and reset pagination when you click level 2nd tab
  Is anyway to do this?

  Can stick us to the standard terminology of APEX: do you mean Parent (level 2) tab or the tab Standard (level 2)?

  Parent tabs this is done directly using the box Erase the Cache property and reset pagination for this page of the tab target.

  For the Standard tabs, create processes from before header tab target:

• Session state > clear Cache...

• Reset the Pagination

• A circle that appears when you click with the eyedropper?

  When you click with the eyedropper in CS5, what is the big circle form that appears on the screen around him?

  Thank you.

  Hello!

  This blog explains what is the circle for: http://blogs.adobe.com/jnack/2010/05/color_picking_improvements_in_photoshop_cs.html

  See also this video: choose colors precisely with the eyedropper

  To disable, uncheck show color ring in the options bar. But try it, learn how to use it: http://blogs.adobe.com/jkost/2010/05/jumping_the_hud.html and you will see it become a major asset in your Photoshop arsenal.

• Small box, Adobe Flash Settings for storage space interferes with videos. It won't go away when you click DECLINE. Windows 7

  This little box pop up asking the storage space appears constantly during the videos, and it won't go away when you click DECLINE.  I tried to DENY EVERYTHING in the settings, but then I couldn't videos, even videos that play, but are covered by the small box of Adobe, asking for storage.  I just never will have access to the videos without the interference of Adobe?

  Hello

  The application that you are running in Adobe Flash Player wants to store some information on your computer, but it needs more space than is currently allocated. Player, Flash displays the amount of space that is currently used for storage and pray the required maximum to save the information.

  You can use the Save Local settings panel to let future applications of this Web site to store information on your computer without asking you for permission each time. To display the Local Storage Panel:

  a. right click on the image for application during its execution.

  b. in the context menu, select settings and then click the Local Storage tab.

  You can also use the Flash Player Settings Manager to manage your settings of local storage at the global level and on a site-by-site basis.

  1. what application you run using Adobe Flash Player?

  2. you are trying to play the videos from the computer or online?

  3. what web browser do you use on your computer?

  Follow the steps below:

  Method 1:

  In the Settings of Adobe Flash Playerpop-up message, check the box never ask again, click allow and control.

  For reference:

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help07.html#117290

  Method 2:

  Uninstall Adobe Flash Player and reinstall the latest version and check.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install the latest version of Adobe Flash Player from the link below:

  Adobe Flash Player:

  http://get.Adobe.com/flashplayer/

  Method 3:

  If you are facing problems in Internet Explorer, and then follow the steps in the link below.

  The video problems when you use Internet Explorer:

  http://support.Microsoft.com/kb/2532294

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For reference:

  Of local storage pop-up question:

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help06.html

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• My button remains as 'up' when you click it.

  Hello world

  Sorry for such a stupid question, but I feel a little ridiculous wrong in my script: I created a button in my library and changed the value of its saturation in its timeline, under 'up' (essentially the button is b & w and gets color when the user will fly over it). When you click on it, the whole page (button included) Faints, the button is removed from the scene and a new scene appears.

  The problem is that the rest of my site is everything in actionscript, and it seems to hinder this motiontween thing a bit... The button actually works very well, but when I come back to this category of my Web site, the button color until I have the mouse on the mouse AND all over again! So, basically, the fact that the button disappears seems to block the button back to its original state. Is there a way to solve this problem, possibly by restarting (or update) the State of a button via actionscript? The strange thing is that my container (which contains the button and the other who has the same problem) is removed from the scene at the end of the fade on, and yet it reappears in the 'up' State.

  Someone has an idea?

  Thank you much in advance.

  Julien.

  You can use:

  var newButton:MovieClip

  var newButtonOverState:DisplayObject;

  {if(!newButton)}

  newButton = new Button();

  newButton.addEventListener (MouseEvent.CLICK, fadeOut);

  newButtonOverState = newButton.overState;

  }

  newButton.overState = newButtonOverState;

  ButtonA.addEventListener (MouseEvent.CLICK, has). button leading to the next category.

  (...)

  function A(e:Event):void {}

  this.addChild (newButton);

  newButton.overState = newButton.upState;

  }

  function fadeOut(e:Event):void {}

  (...) the function makes the objects fade out, "newButton" included.

  this.removeChild (newButton); the button is deleted once dimmed.

  }

  p.s. Please check the useful/correct

• Why can I not see the details of my question, when you click on it in my profile?

  I've created a new issue earlier this week, and apparently I have a question, based on my profile. When you click on the link 'Question' I see a result search failed. Why can I not see my question (to check if an update)?

  Thanks for that - now I see my original question, which remains unanswered (except someone telling me to use another browser!). You are also able to help with this one please?

  (I can send screenshots to illustrate the problem, if it helps...)

  Soon, K

• When you visit a particular site my user name is entered automatically when you click in the required area. I want to avoid this, how?

  This site requires a username to be filled in a specific area and in another box, you enter a series of numbers generated by a generator of numbers (so not a password - different series each time that you open a session).
  However I do not want my user name appears automatically in the first box. Trying to change that in the security settings (extra-options-security), there is a password section where you can choose any exceptions to the rule of the memory (if the box remember is marked). When clicking the exceptions button, the url of the site I'm talking about is not displayed, and it cannot be entered either, since you can't delete here.
  When you click on the option "saved passwords", nor the site, nor the username is listed. I think I've read all the help sections regarding usernames and passwords, but found no solution.
  How can I avoid this username (so only a user name - not the usename/password combination), appear in the box?

  Click on the box, hover over the drop-down menu with your mouse, if you select the word you want to delete, and then press the delete key. If Firefox fills automatically in forms of control