build using nor 6009

Similar Questions

• Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

  Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

  Someone in the building uses Apple can 790-795 network this person hack me and who is?

  Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

• How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

  Hello

  How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

  I'm transferring a 32-bit application on 64-bit.  In visual Studio, I added the 64-bit project configuration.  He compiled the source very well but the reports link errors:

  error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

  These, of course, are the functions OR that I use.  The NIDAQmx.lib has been added to the Input of the link property.

  Any help would be appreciated.

  Thank you

  -Neil shore

  Hi LaserShore,

  Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

  Already running 32-bit application? Have you changed references to the 64-bit version?

  You use Measurement Studio? If so some features are not supported with 64 bit.

  Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C

• Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

  Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

  Here is a list of the ports/areas to the whitelist to access the DPS Server problems

• IM using usb-6009 input signal acquisition

  IM acquirng a domain controller of the signal in the analog input (CSR), a volt of entry in 1.9 ports V is read on the (ai0) port of entry when I use a multimeter to read the value and at the same time I used an indicator to show the data read in the port of entry in my code, the led will turn to 2.5 sometimes 4V... If any body could help me this please answer me...

  I have another doubt too, I read a document in which they mentioned everything using the CSR that the positive end of the source must be connected to the analog input channel and the negative end to the ground in the acquisition of data... but its im using a dc signal I don't have how to connect and what to do...

  Hi Lisette,

  I Don t know what could happen. However, this could be a wiring problem.

  First of all, if you read this signal I'll recommend over the analog GND with your digital GND. You also this thread from the mass of the signal.

  Another thing, you might be able to do is to measure in differential mode, you can connect your 6009 NOR as the multimeter.

  Here's a tutorial that may be useful for you: http://zone.ni.com/devzone/cda/tut/p/id/3344

  Here are also a few KBs talks about what concerns you. Take a look to see if something, it might help.

  http://digital.NI.com/public.nsf/allkb/95CC0CB11D7DF3D18625712E000C4ABD

  http://digital.NI.com/public.nsf/allkb/C7C4AB4BD256EF0386257013001650E7?OpenDocument

  http://digital.NI.com/public.nsf/allkb/C7E181E51E4299FC862570A700604141

  Finally, don't forget to use the Op Amp in follower configuration to avoid damaging your 6009.

  I wish you success!

• How to define logical tristate using NOR-DAQ 6212 in c#

  Hello world

  I am very new to NOR & help each of you experts out there.

  As the subject says, I'm trying to set digital output at tristate DAQmx & c# channel. I found the link on the Tristate property, but I don't know how to use it. http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/bd33b0d/

  Any help would be much appreciated!

  Thank you.

  Hi kasrus,

  You set the property using the following syntax (after creating your task):

  digitalWriteTask.DOChannels.All.Tristate = true;

  As help document states: "you must commit the task for this setting to take effect."  The help document also highlights when the value of property compared to a reading or writing.

  This refers to the status of task template DAQmx:

  State of task model

  http://zone.NI.com/reference/en-XX/help/370466AC-01/mxcncpts/taskstatemodel/

  Methods of configuration will move your task through this model of the State, but you can also control using the syntax in the article below:

  Check, committing, start and stop of NOR-DAQmx tasks programmatically

  http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/verifycommitstartstopdaqtask/

  Kind regards

  Kyle S.

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• Generation of pulses using NOR-PXI-5421 FGen

  Hello Sir/Madam,

  Question:

  We use the Funktiongenerator NOR-PXI-5421 and just want to generate a pulse, because it can be done in almost all cheap Funktiongenerator.

  Unfortunately, I can't find a way to tell the Funktiongenerator to generate a pulse. I can generate Singals as I like, but don't know how to generate a single pulse.

  Perhaps you have a program that gives me this opportunity.

  Thank you for your support.

  Hi Jens,

  You can try to use the Council 5421 scripts. The following examples of LabVIEW: "Fgen Arb Script.vi" or 'Fgen switch between Waveforms.vi' use of script to generate signals, you can create a script that generates a single DC pulse of high level in the same way.

  I hope this information helps you.

  Best regards

  Blase

• Table of Build using Pseudo-file of waiting

  I'm moving to use a queue by simply creating a table.  I writing to a write DAQmx values in a loop at 50 ms, but I won't update the chart every 50 ms (for obvious reasons).  I use a global functional for transmitting data from a slower loop to 500 ms.

  Problem is that I get that each point of the tenth.  Y at - it an easy way to build an array and pass (without overwrite or skip data) to the slower without having to queue loop?

  Thanks for the help.

  Why not use a queue?  It is by far the most effective way to do what you want.

  What you have run in with the FGV is a race condition.  They you used it, it might as well be a local variable or a global variable.  FGVs do NOT prevent the race conditions in the way that you use it.  Here's a good article about the race conditions in the field of LabVIEW log:http://labviewjournal.com/2011/08/race-conditions-and-functional-global-variables-in-labview/

• How to implement Canopen on FPGA to run the engine using NOR-9881?

  Dear,

  Your support will be highly appreciated,

  There is only one available for NOR-9881 example.
   
  Please note that the following materials were properly connected:
  cRIO-9024, cRIO-9113, OR-9881 and motor Nanotec (SMCI36 against L2818L0604-T5X5), the following
  sites Web shows the engine Nanotec in details:
   
  http://us.Nanotec.com/products/660-L28-linear-actuators-with-trapezoid-spindle/
   
  http://us.Nanotec.com/products/1041-SMCI36-stepper-motor-and-BLDC-motor-position ing-control /
   
  The main problem is how to configure the inputs and outputs, where, in most examples, the entry and exit have been automatically
  configured.
   
  the following three examples and I wonder how to start:

  1 - example Nanotec: dependent VISA controls for data transfer
   
  http://us.Nanotec.com/support/application-notes/LabVIEW-example/
   
  2 - reference example CANopen for series C OR - 9853 Module CAN:
  the NOR-9853 has default Can0 which was used in the code

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6093
   
  3 - from finder labView example: search for 9881 then choose
  NOR - CANopen_cRIO.lvproj, which depended on SDO orders for transfer orders
   
  The attached picture shows that NEITHER-9881 can be seen, after compilation and
  loading the bitfile FPGA.
   
  Please, please advice me:
  1. how to start?
  2. how to create variables of entry for NI9881?
  3. how to implement CANopen mode FPGA? where there is no CANopen palette.

  Thanks in advance and

  Hello!

  From my understanding, the 9881 can be treated from the FPGA, but only from the application of the RT. I think that the point 3 of your post examples of the use of the module fine.

  Kind regards

  Georg

• I2C implementation using NOR-6008

  Hello world

  I have a NOR-6008 low cost multifunction data acquisition.

  Can I use this with shifter voltage level to apply the I2C Protocol...

  You must use the approach of bit - strike (i.e., change you the clock and data lines yourself) and it would be timed by the software. But yes, you could do.

  Your next question will be: are there examples? There are many examples on the conduct of IO digital who settle with DAQmx. Regarding the implementation of I2C, the spec is available. http://en.Wikipedia.org/wiki/I%C2%B2C

• CR1000 are accessible using NOR-DAQ?

  Hello

  I'm trying to control a CR1000 datalogger using Labview. Is it possible to configure the available CR1000 in NOR-DAQ?

  Thank you!

  Why do you think you can use drivers OR a product OR NOT?

  NOR-DAQ is for products OR.

• PID control using USB-6009, need of simple video or example vi

  I have a new usb-6009 and have tried all the videos on the NC

  Web site for practice. However with the version 8.6.1 I can't use

  the pid simple vi which is used on the video. (its too old 5 x v)

  I just need a PID simple vi to 8.6.1.so that day, I saw many complexes of vi

  for the demo of pid... I'm creating control tools... too to choose...

  any help looking for a simple vi or video? - as the demo shown

  the NI USB-6009 Web site...

  Concerning

  JJ

  Well, I did a simple proportional control for box usb-6009

  with a time inside the while loop... don't know if it's the

  Gourmet addresses... my sub PID vi is very simple...

  But it shows how to use labview and usb-6009 for case

  a loop very simple return PID...

  Concerning

  J

• Problem setting Legacy DAQ board using NOR-DAQ 6.1 for Labview

  I know that the Board of Directors is an old legacy product not supported by NEITHER, however for a low-budget project, I have 3 of these AT-MIO-16 x cards and the need to use them.

  I know I got this job in the past not distant os, however, for the life of me can't get things sorted and work.

  You use a NT box, in which this configuration used to work... uninstalled and started fees for other reasons, and I can not get the NOR-DAQ 6.1 to support LAbview 6.1 or 7.1.

  Of course, I understand the OR-DAQ 6.1 should be used for Labview 5 and older, but also know this has been successfully done in the past.

  I downloaded all knowledge base articles dozed or both support and remember to use successfully the last time that I set up so I know not somehow it works.

  My configuration is: AT-MIO-16 X to the bus combo board (called work)

  NT PC

  LabVIEW 6.1 or 7.1

  NOR-DAQ 6.1 is the most recent to support this card.

  However, it will not install its support to its latest versions of Labview and I get errors, crashing, or missing files, when I followed various circumvention of knowledge base solutions.

  I was hoping that someone has a documentation somewhere how to handle this, because it really is a matrix of spaghetti.

  I can get NOR-DAQ support files installed, and Configuration Manager works well, finds the map and allows its parameters to be defined.

  But when I load the DAQ vi of any type, Labview accidents and the wizard of data acquisition channel does not work at all (no error).

  Thank you

  Yes, the installation program from the folder of disks for NOR-DAQ 6.1 on the ftp site has worked well.

  Workaround. Thank you

• How to speed up loop DAQ triggered using NOR cDAQ-9174 with NOR-9215 and NOR-9402

  Hello

  I use LV2010 and NOR-DAQmx 9.2.2. I have a NOR cDAQ-9174 with a NEITHER-9215 4 channel 100 k simultaneous ADC and NOR-9402 4 channel DIO module trigger and reset.

  We run WinXP sp3 on a Dell M4400 core 2 duo @2. 26 Ghz.

  I used the code example NI DAQmx for acquisition of tension with trigger HW. My goal is to try all 4 channels on the 9215 simultaneously when a trigger is received on channel 0 of the 9402, after data is read, I use channel 1 on the 9402 to reset the trigger of the target material.  I have a version of this work, however the maximum event rate is ~ 16/second. I have the Setup 9215 for finite samples / 10 samples per channel which is ~ 400uSec of conversion time and I realize he is above in the appeal of vi, but ~ 50mSeconds worth?

  The target detector can put out up to 1 k / event triggers / seconds.  Only, I received a rate of 8 per second and I added the NOR-DAQmx control vi driver and chose "commit" this did double the rate.

  My question is what is the maximum rate of loop for these devices (trigger/conversion/reading device / reset) and start over? I noticed that just let free the 9215, carried out using the 'Acq & chart internal strain Clk' raised only the rate of events up to 20 Hz.

  Thank you

  normbo663

  Hi normbo663,

  You can get this works far better assuming you have an available counter (there are 4 on the backplane of the 9174).

  DAQ Compact supports the tasks of meter output "redeclenchables" that can be used to generate a finite pulse train.  You can set a task of finished meter redeclenchables output to be used as sample for your task of analog clock.  The task of the meter output will be re-Army (less than 12, 5-25 ns) as soon as it's finished out the last pulse.  The task of analog input would be configured to run continuously, but it would only sample based on the output of the meter triggered.  For an example, see here.

  You can reference the internal counters on the cDAQ without signals through a routing module using: cDAQ1/_ctr0 (right click on the chain counter control, then select i/o name of filtering and check channels internal to add these options to the drop down).

  Thus, with the tips above, you should be able to immediately re - arming your analog acquisition on the 9215 using one background basket counters.  It seems that the second half of the application is to use a second channel on the 9402 to reset the trigger of your DUT.  You can deterministically generate this signal so by configuring a 2nd redeclenchables meter out task (single pulse, but this time).  All you need to do is the initial delay on the appropriate value for your analog acquisition.  Trigger this counter on the same PFI line that trigger you your analog task from.

  Using counters to generate the signals you need in a deterministic way, the loop becomes is no longer a problem (as long as your input buffer does not overflow).  You may need to re-read several triggers at the same time for the loop to keep (for example to read 1000 samples each, which would correspond to 100 triggers 10 samples).

  Best regards

• The value FPS using NOR-IMAQ with a GigE camera programmatically?

  Hi all

  I'm (slowly) learning how LabVIEW plays well with the cameras, GigE, that I just bought.

  At this point, I'm trying to understand how to programmatically set the value of fps for the camera.  I have been using the examples NOR-IMAQdx to control the cameras so far, but I am open to trying anything.  Someone at - it a good example of how I can change the frame rate "on the fly?

  My next task will be to find a way to change the size of the image on the screen programmatically, so if anyone has any ideas for me on this path there, I'd be pleased them too well.

  Thank you very much

  FB

  I thought about it:

  1. use the vi IMAQdx open camera to open the camera

  2 use the "List attributes" in the palette of NOR-IMAQdx to see all available attributes

  3 using the step 2, above, I could find the attribute, the attribute "AcquisitionFrameRateAbs".

  4. create a node in the output of the open unit VI property, choose 'Attributes of the camera,' select "Attribute Active."

  5. set the property node "change all to write."

  6. connect a constant string of 'AcquisitionFrameRateAbs' attributeinto the property node value

  7. create another node in property 'Attributes of the camera', this time by selecting 'Value' and affecting the type DBL

  8. change all to write

  9 create a digital control for cadence

  10. connect the digital control to the property node 'ValueDBL '.

  Presto!  You are finished.